USGS Science⌕ Search

SEARCH · USGS Science

Results for “Mechanics of Materials”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13Linked to original sources
USGS2011

Permeability-porosity relationships of subduction zone sediments

Permeability–porosity relationships for sediments from the northern Barbados, Costa Rica, Nankai, and Peru subduction zones were examined based on sediment type, grain size distribution, and general mechanical and chemical compaction history. Greater correlation was observed between permeability and porosity in siliciclastic sediments, diatom oozes, and nannofossil chalks than in nannofossil oozes. For siliciclastic sediments, grouping of sediments by percentage of clay-sized material yields relationships that are generally consistent with results from other marine settings and suggests decreasing permeability as percentage of clay-sized material increases. Correction of measured porosities for smectite content improved the correlation of permeability–porosity relationships for siliciclastic sediments and diatom oozes. The relationship between permeability and porosity for diatom oozes is very similar to the relationship in siliciclastic sediments, and permeabilities of both sediment types are related to the amount of clay-size particles. In contrast, nannofossil oozes have higher permeability values by 1.5 orders of magnitude than siliciclastic sediments of the same porosity and show poor correlation between permeability and porosity. More indurated calcareous sediments, nannofossil chalks, overlap siliciclastic permeabilities at the lower end of their measured permeability range, suggesting similar consolidation patterns at depth. Thus, the lack of correlation between permeability and porosity for nannofossil oozes is likely related to variations in mechanical and chemical compaction at shallow depths. This study provides the foundation for a much-needed global database with fundamental properties that relate to permeability in marine settings. Further progress in delineating controls on permeability requires additional carefully documented permeability measurements on well-characterized samples.

Marine Geology↗
USGS1981

Deformation of host rocks and flow of magma during growth of minette dikes and breccia-bearing intrusions near Ship Rock, New Mexico

We have studied a small group of minette dikes and plugs that crop out within a flat-lying sequence of siltstone and shale near Ship Rock, a prominent volcanic throat of tuff breccia in northwestern New Mexico. Seven dikes form a radial pattern about Ship Rock we describe in detail the northeastern dike, which has an outcrop length of about 2,900 m, an average thickness of 2.3 m, and a maximum thickness of 7.2 m. The dike is composed of 35 discrete segments arranged in echelon; orientation. of dike segments ranges systematically from N. 52? E. to N. 66? E. A prominent joint set strikes parallel to the segments and is localized within several tens of meters of the dike. Regional joint patterns display no obvious relation to dike orientation. Small offsets of segment contacts, as well as wedge-shaped bodies of crumpled host rock within segments mark the sites of coalescence of smaller segments during dike growth. Bulges in the dike contact, which represent a nondilational component of growth, indicate that wall rocks were brecciated and eroded during the flow of magma. Breccias make up about 9 percent of the 7,176-m 2 area of the dike, are concentrated in its southwest half, and are commonly associated with its thickest parts. We also describe three subcircular plugs; each plug is smaller than 30 m in diameter, is laterally associated with a dike, and contains abundant breccias. Field evidence indicates that these plugs grew from the dikes by brecciation and erosion of wallrocks and that the bulges in the contact of the northeastern dike represent an initial stage of this process. From continuum-mechanical models of host-rock deformation, we conclude that dike propagation was the dominant mechanism for creating conduits for magma ascent where the host rock was brittle and elastic. At a given driving pressure, dikes dilate to accept greater volumes of magma than plugs, and for a given dilation, less work is done on the host rocks. In addition, the pressure required for dike growth decreases with dike length. From numerical solutions for dilation of cracks oriented like segments of the northeastern dike, we find that we can best model the form of the dike by treating it as composed of 10 cracks rather than 35. We attribute this result to coalescence of adjacent segments below the present outcrop and to inelastic deformation at segment ends. Using a driving pressure of 2 MPa (20 bars), we estimate a shear modulus of about 10^3 MPa for the host rocks, in agreement with laboratory tests on soft shale. A propagation criterion based on stress intensity at the segment ends indicates a fracture toughness of the host rocks of about 100 MPa-m^? , a hundredfold greater than values reported from laboratory tests. Segmentation of fractures is common in many materials and has been observed during fissure eruptions at Kilauea Volcano in Hawaii. At the northeastern dike, we attribute segmentation to local rotation of the direction of least principal compressive stress. From continuum-mechanical models of magma and heat flow in idealized conduits, we conclude that magma flows far more rapidly and with less relative heat loss in plugs than in dikes. Although dikes are the preferred form for emplacement, plugs are the preferred form for the flow of magma. We present a numerical solution for volumetric flow rate and wall heat flux for the northeastern dike and find that although the flow rate is extremely sensitive to conduit geometry, the rate of heat loss to wall rocks is not. During emplacement of the northeastern dike, local flow rate increased where wall rocks were eroded and reached a maximum of about 45 times the mean initial rate, whereas the maximum rate of heat loss to wallrocks increased to only 1.6 times the mean initial rate. An inferred progression from continuous magma flow along a dike to flow from a plug agrees well with observations of volcanic eruptions that begin from fissures and later are localized at discrete vents. We

Professional Paper↗
USGS1954

Uranium-bearing lignite and its relation to the White River and Arikaree formations in northwestern South Dakota and adjacent states

In northwestern South Dakota and adjacent areas uranium-bearing lignite beds occur at many horizons in the Hell Creek formation of late Cretaceous age and the overlying Ludlow, Tongue River, and Sentinel Butte members of the Fort Union formation of Paleocene age. Uranium analyses of 275 surface and auger samples and about 1,000 core samples show that many of the lignite beds contain 0. 005 to 0. 02 percent uranium with concentrations of 0. 05 to 0.10 percent uranium in the lignite ash. Analytical data indicate that the region contains an aggregate of at least 47,500, 000 tons of lignite with an average grade of slightly more than .0. 008 percent containing 3, 900 tons of uranium. Almost a fifth of the estimated reserves are adapted to strip mining and are in beds averaging about 4 feet in thickness. Uranium concentrations of this magnitude in lignite indicate that these deposits upon the development of proper utilization techniques and processes may be an important future source of uranium. Recent discoveries of ore-grade deposits of autunite-bearing lignite and secondary uranium minerals in carbonaceous sandstone at Cave Hills and Slim Buttes indicate that northwestern South Dakota and adjacent areas may containimportant reserves of uranium-ore. The stratigraphic units containing the uraniferous lignite beds have a combined thickness of about 1, 500 feet and are unconformably overlapped by 300 feet or more of tuffaceous sandstone and bentonitic claystone of the White River and Arikaree formations of Oligocene and Miocene age. The stratigraphically highest lignite beds in the local sequence have the greatest concentration of uranium,, and the uranium content is greatest at the top of thick lignite beds, diminishing progressively downward to a vanishing point in their lower parts. Variations in permeability of the rock overlying the mineralized lignite beds seem to be reflected in the intensity of uranium mineralization. Most of the known uranium-bearing lignite deposits in the region are closely overlain by the White River and Arikaree formations. Field evidence indicates that the uranium in the lignite is independent of the age of the formation in which the lignite occurs and that the uranium has been concentrated by downward and laterally moving ground water from the overlying mildly radioactive, tuffaceous rocks. The White River and Arikaree formations have about 1.2 times more uranium than the average sedimentary rock. The uranium content of spring water from these formations is 30 times as great or greater than that of normal ground water. Field relations suggest that the uranium is of secondary origin and has been introduced subsequent to the accumulation and marked regional warping of the lignite beds and associated rocks. During the transportation of the uranium-bearing volcanic materials from their place of origin to the site of deposition in South Dakota, the uranium is believed to have been held as a finely disseminated constituent in volcanic ash. Subsequent release or displacement of the uranium is thought to have resulted from weathering and chemical breakdown, thus freeing and allowing the transportation of the uranium, probably in ionic form, to the lignite by downward and laterally moving groundwaters 0 Gar bonaceous material in the path of these uranium-bearing waters is believed to have acted as a receptor that extracted the uranium as a result of an ion exchange mechanism or by the formation of organo-metallic compounds Geologic factors that seem most significant in controlling the distribution and concentration of uranium in Dakota lignites are as follows: 1) stratlgraphic proximity of the lignite to the base of the White River formation; 2) permeability of the rocks overlying the lignites; 3) adsorptive properties and porosities of the lignitic constituents; 4) present and past position of the groundwater table; and 5) the amount of uranium in the original White River and Arikaree sediments. Individual maps showing the extent, thickness, and variations in mineral content of the important deposits in the Table Mountain, Cave Hills, Slim Buttes, Lodgepole, and Medicine Pole areas are included. Conditions controlling the concentration of uranium are described and their application as guides to finding additional reserves by the presently held concepts are explained and illustrated.

Montana;North Dakota;South Dakota;Wyoming↗
USGS2012

Reconciliation of stress and structural histories of the Tharsis region of Mars

We present a new compilation of the structural and stratigraphic evolution of the Tharsis region of Mars that incorporates recent advances in understanding its stratigraphy, and we introduce a lithospheric deformation model that can account for the observations. The first period in the formation of Tharsis occurred in Late Noachian/Early Hesperian time with the deposition of volcanic plains materials throughout the surrounding highlands (e.g., Lunae Planum) and on the Tharsis rise (which includes the giant volcanoes and surrounding, elevated lava fields). Extensive radial normal faulting occurred on the rise, locally extending outward at Valles Marineris and Tempe Terra, and concentric wrinkle ridges formed along the edge of the rise. This regional deformation appears to have been modulated by a global compressional stress field due to rapid planetary cooling and contraction. The second period occurred during the Late Hesperian/Amazonian with Tharsis volcanism centered on the rise and radial extensional deformation that extended from the center of the rise for thousands of kilometers. We propose a model in which the lithosphere beneath Tharsis consists of a thin elastic crustal cap on the rise that is mechanically detached from the strong upper mantle by a volcanically thickened, hot, weak lower crust. These layers merge into a single cooler, strong lithospheric layer around the edges of the rise. This model is capable of generating large extensional hoop stresses throughout much of the western hemisphere, in agreement with observations. The tectonic interpretation of the stresses predicted by this model requires the reconciliation of extensional strain within narrow grabens and compressional strain within wrinkle ridges with (1) processes in the deeper lithosphere, (2) the sparsity of strike-slip faults, and (3) other global or locally important stress fields. Stresses predicted by global models affect the entire thickness of the lithosphere, and they can be reconciled with narrow, closely spaced grabens that accommodate large amounts of extensional strain in the upper few kilometers of the lithosphere if the grabens are underlain and kinematically linked with dikes or other tension cracks, such as hydrofractures. Deeper levels of the lithosphere can accommodate this strain by elastic expansion if grabens are spaced far apart (many tens to hundreds of kilometers). Mechanical considerations suggest that deformation on faults beneath wrinkle ridges could extend through a significant thickness of the brittle crust. A number of factors, including stresses generated by the addition of overburden, intrusion of dikes, weakness of geologic materials under extension, and the laterally constrained nature of a single lithospheric plate, may have inhibited the formation of strike-slip faults on Mars. Stresses generated from the removal of overburden could have augmented planetwide wrinkle ridge formation during the Late Noachian/Early Hesperian and in Kasei Valles and western Chryse Planitia during the Early Amazonian. The nonuniform distribution of tectonic features around Tharsis can be understood in terms of the concentration of regional stresses and strain near weaker volcanotectonic centers.

Journal of Geophysical Research↗
USGS2012

Southwest Washington littoral drift restoration—Beach and nearshore morphological monitoring

A morphological monitoring program has documented the placement and initial dispersal of beach nourishment material (280,000 m3) placed between the Mouth of the Columbia River (MCR) North Jetty and North Head, at the southern end of the Long Beach Peninsula in southwestern Washington State. A total of 21 topographic surveys and 8 nearshore bathymetric surveys were performed between July 11, 2010, and November 4, 2011. During placement, southerly alongshore transport resulted in movement of nourishment material to the south towards the MCR North Jetty. Moderate wave conditions (significant wave height around 4 m) following the completion of the nourishment resulted in cross-shore sediment transport, with most of the nourishment material transported into the nearshore bars. The nourishment acted as a buffer to the more severe erosion, including dune overtopping and retreat, that was observed at the northern end of the study area throughout the winter. One year after placement of the nourishment, onshore transport and beach recovery were most pronounced within the permit area and to the south toward the MCR North Jetty. This suggests that there is some long-term benefit of the nourishment for reducing erosion rates locally, although the enhanced recovery also could be due to natural gradients in alongshore transport causing net movement of the sediment from north to south. Measurements made during the morphological monitoring program documented the seasonal movement and decay of nearshore sand bars. Low-energy conditions in late summer resulted in onshore bar migration early in the monitoring program. Moderate wave conditions in the autumn resulted in offshore movement of the middle bar and continued onshore migration of the outer bar. High-energy wave conditions early in the winter resulted in strong cross-shore transport and creation of a 3-bar system along portions of the coast. More southerly wave events occurred later in the winter and early spring and coincided with the complete loss of the outer bar and net loss of sediment from the study area. These data suggest that bar decay may be an important mechanism for exporting sediment from Benson Beach north to the Long Beach Peninsula. The measurements presented in this report represent one component of a broader monitoring program designed to track the movement of nourishment material on the beach and shoreface at this location, including continuous video monitoring (Argus), in situu measurements of hydrodynamics, and a physical tracer experiment. Field data from the monitoring program will be used to test numerical models of hydrodynamics and sediment transport and to improve the capability of numerical models to support regional sediment management.

Washington↗
USGS1995

Remediation of uranium contaminated soils with bicarbonate extraction and microbial U(VI) reduction

A process for concentrating uranium from contaminated soils in which the uranium is first extracted with bicarbonate and then the extracted uranium is precipitated with U(VI)-reducing microorganisms was evaluated for a variety of uranuum-contaminated soils. Bicarbonate (100 mM) extracted 20–94% of the uranium that was extracted with nitric acid. The U(VI)-reducing microorganism, Desulfovibrio desulfuricans reduced the U(VI) to U(IV) in the bicarbonate extracts. In some instances unidentified dissolved extracted components, presumably organics, gave the extract a yellow color and inhibited U(VI) reduction and/or the precipitation of U(IV). Removal of the dissolved yellow material with the addition of hydrogen peroxide alleviated this inhibition. These results demonstrate that bicarbonate extraction of uranium from soil followed by microbial U(VI) reduction might be an effective mechanism for concentrating uranium from some contaminated soils.

Journal of Industrial Microbiology↗
USGS2007

Dispersal of large branchiopod cysts: Potential movement by wind from potholes on the Colorado Plateau

Wind is suspected to be a primary dispersal mechanism for large branchiopod cysts on the Colorado Plateau. We used a wind tunnel to investigate wind velocities capable of moving pothole sediment and cysts from intact and disturbed surfaces. Material moved in the wind tunnel was trapped in filters; cysts were separated from sediment and counted. Undisturbed sediment moved at velocities as low as 5.9 m s-1 (12.3 miles h-1). A single all-terrain vehicle (ATV) track increased the sediment mass collected 10-fold, with particles moving at a wind velocity of only 4.2 m s-1 (8.7 miles h-1). Cysts were recovered from every wind tunnel trial. Measured wind velocities are representative of low-wind speeds measured near Moab, Utah. Wind can move large numbers of cysts to and from potholes on the Colorado Plateau. Our results indicate that large branchiopod cysts move across pothole basins at low-wind speeds; additional work is needed to establish velocities at which cysts move between potholes. ?? 2007 Springer Science+Business Media B.V.

Hydrobiologia↗
USGS2019

Bright carbonate surfaces on Ceres as remnants of salt-rich water fountains

Vinalia and Cerealia Faculae are bright and salt-rich localized areas in Occator crater on Ceres. The predominance of the near-infrared signature of sodium carbonate on these surfaces suggests their original material was a brine. Here we analyze Dawn Framing Camera's images and characterize the surfaces as composed of a central structure, either a possible depression (Vinalia) or a central dome (Cerealia), and a discontinuous mantling. We consider three materials enabling the ascent and formation of the faculae: ice ascent with sublimation and carbonate particle lofting, pure gas emission entraining carbonate particles, and brine extrusion. We find that a mechanism explaining the entire range of morphologies, topographies, as well as the common composition of the deposits is brine fountaining. This process consists of briny liquid extrusion, followed by flash freezing of carbonate and ice particles, particle fallback, and sublimation. Subsequent increase in briny liquid viscosity leads to doming. Dawn observations did not detect currently active water plumes, indicating the frequency of such extrusions is longer than years.

Icarus↗
USGS1998

Episodic fluid flow in the Nankai accretionary complex: Timescale, geochemistry, flow rates, and fluid budget

Down-hole geochemical anomalies encountered in active accretionary systems can be used to constrain the timing, rates, and localization of fluid flow. Here we combine a coupled flow and solute transport model with a kinetic model for smectite dehydration to better understand and quantify fluid flow in the Nankai accretionary complex offshore of Japan. Compaction of sediments and clay dehydration provide fluid sources which drive the model flow system. We explicitly include the consolidation rate of underthrust sediments in our calculations to evaluate the impact that variations in this unknown quantity have on pressure and chloride distribution. Sensitivity analysis of steady state pressure solutions constrains bulk and flow conduit permeabilities. Steady state simulations with 30% smectite in the incoming sedimentary sequence result in minimum chloride concentrations at site 808 of 550 m M , but measured chlorinity is as low as 447 m M . We simulate the transient effects of hydrofracture or a strain event by assuming an instantaneous permeability increase of 3–4 orders of magnitude along a flow conduit (in this case the décollement), using steady state results as initial conditions. Transient results with an increase in décollement permeability from 10 −16 m 2 to 10 −13 m 2 and 20% smectite reproduce the observed chloride profile at site 808 after 80–160 kyr. Modeled chloride concentrations are highly sensitive to the consolidation rate of underthrust sediments, such that rapid compaction of underthrust material leads to increased freshening. Pressures within the décollement during transient simulations rise rapidly to a significant fraction of lithostatic and remain high for at least 160 kyr, providing a mechanism for maintaining high permeability. Flow rates at the deformation front for transient simulations are in good agreement with direct measurements, but steady state flow rates are 2–3 orders of magnitude smaller than observed. Fluid budget calculations indicate that nearly 71% of the incoming water in the sediments leaves the accretionary wedge via diffuse flow out the seafloor, 0–5% escapes by focused flow along the décollement, and roughly 1% is subducted.

Journal of Geophysical Research B: Solid Earth↗
USGS2019

Enhanced landslide mobility by basal liquefaction: the 2014 SR530 (Oso), Washington landslide

Landslide mobility can vastly amplify the consequences of slope failure. As a compelling example, the March 22, 2014 landslide near Oso, Washington (USA) was particularly devastating, traveling across a 1-km+ wide river valley, killing 43 people, destroying dozens of homes, and temporarily closing a well-traveled highway. To resolve causes for the landslide’s behavior and mobility, we conducted detailed post-event field investigations and material testing. Geologic and structure mapping revealed a progression of geomorphological structures ranging from debris flow lobes at the distal end, through hummock fields, laterally continuous landslide blocks, back-rotated blocks, and finally colluvial slides and falls at the landslide headscarp. Primary structures, as well as stratigraphic and vegetation patterns, in the landslide deposit indicated rapid extensional motion of the approximately nine-million-m3 source volume in a closely timed sequence of events. We identified hundreds of transient sand boils in the landslide runout zone – evidence of widespread elevated pore-water pressures with consequent shear-strength reduction at the base of the slide. During the event, underlying wet alluvium liquefied and allowed quasi-intact slide hummocks to extend and translate long distances across the flat valley. Most of the slide material itself did not liquefy. Using geotechnical testing and numerical modeling, we examined rapid undrained loading, shear and collapse of loose saturated alluvium, and strong ground shaking as potential liquefaction mechanisms. Our analyses show that some layers in the alluvium can liquefy when sheared, as could occur with rapid undrained loading. Simultaneous ground shaking could have contributed to pore-pressure generation as well. Two key elements, a large and rapid failure overriding wet liquefiable sediments, enabled the landslide’s high mobility. Basal liquefaction may enhance mobility of other landslides in similar settings.

Washington↗
USGS1990

Carbon monoxide detection of chemisorbed oxygen in coal and other carbonaceous materials

The oxidation of carbon monoxide by mildly oxidized and devolatilized coal samples was studied thermogravimetrically. The oxidation was attributed to oxygen chemisorbed on inorganic components of the coals. The reaction of CO with pyrite producing carbonyl sulphide, OCS, accompanied the oxidation. A mechanism for CO oxidation is proposed in which active oxygen chemisorbed on the inorganic components of the coal directly oxidized CO to CO 2 , and facilitates the chemisorption of CO on the coal as carbonate. A factor, α = ( 11 14 ) [1 − ( W n W c )] "> α = (1114) [1 − (WnWc)] , was derived where W n is the sample weight loss not attributed to OCS formation, and W c is the estimated weight of evolved CO 2 . This quantity is proportional to the fraction of CO 2 produced by the direct oxidation of CO, and was used to compare the coal samples studied. Samples of an Illinois No. 5 coal yielded average α values of 0.7 and those of an Illinois No. 6 coal yielded values of 0.6, indicating that in these cases, the majority of CO 2 produced came from the direct oxidation of CO. The results obtained for the coal samples are compared with a selection of carbonaceous samples for which the proposed mechanism does not apply.

Fuel↗
USGS2002

Strategic plan for the Coordinated Intermountain Restoration Project

In 1982, the Bureau of Land Management’s (BLM) Idaho State Office began the Intermountain Greenstripping and Rehabilitation Research Project (IGRRP), or the “Greenstripping Program,” to investigate plant materials and technologies that can reduce wildfire incidence and improve rehabilitation practices. Rehabilitation is normally applied as a reactive process to wildfires, yet land managers in the Great Basin wish to become proactive by replacing fire-prone invasive annual grasses with native plants. The Coordinated Intermountain Restoration Project (CIRP) evolved from the Greenstripping Program to conduct research studies and provide technical assistance on restoration of native ecosystems on rangelands that are infested with invasive annual grasses or other invasive or noxious weeds. To accomplish this objective, the CIRP will promote the understanding of ecosystem disturbance dynamics as well as evaluate plant materials, site preparation techniques, weed control methods, seeding equipment, management methods, and monitoring techniques for restoration projects. The CIRP will not address the restoration of forested or woodland (juniper [Juniperus]) ecosystems. It will include a component on fuel management to reduce the impacts of wildfires on semiarid rangeland ecosystems where exotic annual grasses provide the fuel. The people who will benefit directly from this research include land managers and users of public and private lands in the northern Great Basin, the Columbia Plateau, and the Snake River Plain. The CIRP will provide an integration framework for a multidisciplinary approach to research with numerous opportunities for input and collaboration. The U.S. Geological Survey will initially dedicate approximately \$1 million over 5 years (about \$200,000 per year) to jump-start this effort. U.S. Geological Survey funds will establish a science advisory board to oversee the project. This board will contain members of Federal research and management agencies within the region. U.S. Geological Survey funds will support (1) continued development of VegSpec, a computer program that is a restoration expert system, (2) research to examine changes in ecosystem processes when native plant-dominated communities shift to communities dominated by exotic annual grasses, and (3) research to address mechanisms for establishing native plants in locations dominated by exotic annual grasses. Through these initial funds, USGS hopes to leverage additional research with other agencies (e.g., BLM’s Great Basin Restoration Initiative or the Native Plant Materials Development Project, which is an interagency program to supply and manage native plant materials for restoration and rehabilitation on Federal lands) or funding organizations (e.g., the U.S. Department of Agriculture’s [USDA] National Research Initiative Competitive Grants Program, or the USDA’s and U.S. Department of the Interior’s [USDOI] Joint Fire Science Program), and to obtain additional research partners (e.g., university or Federal scientists) willing to expand this effort to address all aspects of this strategic plan.

Information and Technology Report↗
USGS1996

Rheology of water ices V and VI

We have measured the mechanical strength (σ) of pure water ices V and VI under steady state deformation conditions. Constant displacement rate compressional tests were conducted in a gas apparatus at confining pressures from 400 < P < 800 MPa, temperatures from 209 < T < 270 K, and strain rates 7 × 10 −7 < < 7 × 10 −4 s −1 . Most of the results fit to an empirical flow law of the form = A σ n exp {−( E * + PV *)/ RT }, where the four material constants A , n , E *, and V * are (for in inverse seconds and P and σ in megapascals) 10 23.0 , 6.0, 136 kJ/mol, and 29 cm 3 /mol, respectively, for ice V; and 10 6.7 , 4.5, 66 kJ/mol, and 11 cm 3 /mol, respectively, for ice VI. Ice VI may weaken to a mechanism of higher E * at T > 250 K. Ices V and VI are thus rheologically distinct but by coincidence have approximately the same strength under the conditions chosen for these experiments. To avoid misidentification, these tests are therefore accompanied by careful observations of the occurrences and characteristics of phase changes. One sample each of ice V and VI was quenched at pressure to metastably retain the high-pressure phase and the acquired deformation microstructures; X ray diffraction analysis of these samples confirmed the phase identification. Surface replicas of the deformed and quenched samples suggest that ice V probably deforms largely by dislocation creep, while ice VI deforms by a more complicated process involving substantial grain size reduction through recrystallization.

Journal of Geophysical Research B: Solid Earth↗
USGS2025

Review: The hydrogeology of critical mineral resources relevant to the energy transition

Attaining the goals of the international treaty on climate change (the Paris Agreement) will greatly increase the demand for the critical minerals required to implement clean-energy technologies. This poses both challenges and opportunities to the hydrogeologic community from several perspectives. Here, important insights that the hydrogeological sciences have to offer for mineral exploration, mineral production, and addressing environmental issues related to mining and mine decommissioning are summarized. This study focuses on copper, cobalt, lithium, and rare earths to represent the broad spectrum of critical minerals and illustrate their relevance by referring to projected demands and production rates. The current understanding of the hydrogeologic processes that form major deposits of these minerals are then summarized. Ore is defined as the naturally occurring material from which minerals of economic value can be extracted, where most ore deposits are the products of complex hydrogeologic couplings between fluid flow, heat transport, solute transport, chemical reactions, and mechanical deformation. Exploration models for the discovery of deeper, hidden deposits are potentially informed by hydrogeologic theory and hydrogeochemical processes. Hydrogeologic understanding and methods are also essential to production and recovery. Longstanding challenges are mine dewatering and (conversely) mine water supply, as well as mineral-extraction practices such as spoil heap leaching and in situ mining. New challenges arise from element extraction from subsurface brines. Finally, the quantity of water use and potential environmental impacts of mining on water quality are at the core of ‘social license’: the approval and acceptance of society to mining activities.

Hydrogeology Journal↗
USGS2007

Geologic mapping of the Amirani-Gish Bar region of Io: Implications for the global geologic mapping of Io

We produced the first geologic map of the Amirani-Gish Bar region of Io, the last of four regional maps generated from Galileo mission data. The Amirani-Gish Bar region has five primary types of geologic materials: plains, mountains, patera floors, flows, and diffuse deposits. The flows and patera floors are thought to be compositionally similar, but are subdivided based on interpretations regarding their emplacement environments and mechanisms. Our mapping shows that volcanic activity in the Amirani-Gish Bar region is dominated by the Amirani Eruptive Center (AEC), now recognized to be part of an extensive, combined Amirani-Maui flow field. A mappable flow connects Amirani and Maui, suggesting that Maui is fed from Amirani, such that the post-Voyager designation "Maui Eruptive Center" should be revised. Amirani contains at least four hot spots detected by Galileo, and is the source of widespread bright (sulfur?) flows and active dark (silicate?) flows being emplaced in the Promethean style (slowly emplaced, compound flow fields). The floor of Gish Bar Patera has been partially resurfaced by dark lava flows, although other parts of its floor are bright and appeared unchanged during the Galileo mission. This suggests that the floor did not undergo complete resurfacing as a lava lake as proposed for other ionian paterae. There are several other hot spots in the region that are the sources of both active dark flows (confined within paterae), and SO2- and S2-rich diffuse deposits. Mapped diffuse deposits around fractures on mountains and in the plains appear to serve as the source for gas venting without the release of magma, an association previously unrecognized in this region. The six mountains mapped in this region exhibit various states of degradation. In addition to gaining insight into this region of Io, all four maps are studied to assess the best methodology to use to produce a new global geologic map of Io based on the newly released, combined Galileo-Voyager global mosaics. To convey the complexity of ionian surface geology, we find that a new global geologic map of Io should include a map sheet displaying the global abundances and types of surface features as well as a complementary GIS database as a means to catalog the record of surface changes observed since the Voyager flybys and during the Galileo mission.

Icarus↗
USGS2015

Physical abrasion of mafic minerals and basalt grains: application to Martian aeolian deposits

Sediment maturity, or the mineralogical and physical characterization of sediment deposits, has been used to locate sediment source, transport medium and distance, weathering processes, and paleoenvironments on Earth. Mature terrestrial sands are dominated by quartz, which is abundant in source lithologies on Earth and is physically and chemically stable under a wide range of conditions. Immature sands, such as those rich in feldspars or mafic minerals, are composed of grains that are easily physically weathered and highly susceptible to chemical weathering. On Mars, which is predominately mafic in composition, terrestrial standards of sediment maturity are not applicable. In addition, the martian climate today is cold, dry and sediments are likely to be heavily influenced by physical weathering rather than chemical weathering. Due to these large differences in weathering processes and composition, martian sediments require an alternate maturity index. Abrason tests have been conducted on a variety of mafic materials and results suggest that mature martian sediments may be composed of well sorted, well rounded, spherical basalt grains. In addition, any volcanic glass present is likely to persist in a mechanical weathering environment while chemically altered products are likely to be winnowed away. A modified sediment maturity index is proposed that can be used in future studies to constrain sediment source, paleoclimate, mechanisms for sediment production, and surface evolution. This maturity index may also provide details about erosional and sediment transport systems and preservation processes of layered deposits.

Icarus↗
USGS2014

Assessing the solubility controls on vanadium in groundwater, northeastern San Joaquin Valley, CA

The solubility controls on vanadium (V) in groundwater were studied due to concerns over possible harmful health effects of ingesting V in drinking water. Vanadium concentrations in the northeastern San Joaquin Valley ranged from <3 μg/L to 70 μg/L with a median of 21 μg/L. Concentrations of V were highest in samples collected from oxic groundwater (49% > 25 μg/L) and lowest in samples collected from anoxic groundwater (70% < 0.8 μg/L). In oxic groundwater, speciation modeling (SM) using PHREEQC predicted that V exists primarily as the oxyanion H 2 VO 4 − . Adsorption/desorption reactions with mineral surfaces and associated oxide coatings were indicated as the primary solubility control of V 5+ oxyanions in groundwater. Environmental data showed that V concentrations in oxic groundwater generally increased with increasing groundwater pH. However, data from adsorption isotherm experiments indicated that small variations in pH (7.4–8.2) were not likely as an important a factor as the inherent adsorption capacity of oxide assemblages coating the surface of mineral grains. In suboxic groundwater, accurate SM modeling was difficult since Eh measurements of source water were not measured in this study. Vanadium concentrations in suboxic groundwater decreased with increasing pH indicating that V may exist as an oxycationic species [e.g. V(OH) 3 + ]. Vanadium may complex with dissolved inorganic and organic ligands under suboxic conditions, which could alter the adsorption behavior of V in groundwater. Speciation modeling did not predict the existence of V-inorganic ligand complexes and organic ligands were not collected as part of this study. More work is needed to determine processes governing V solubility under suboxic groundwater conditions. Under anoxic groundwater conditions, SM predicts that aqueous V exists as the uncharged V(OH) 3 molecule. However, exceedingly low V concentrations show that V is sparingly soluble in anoxic conditions. Results indicated that V may be precipitating as V 3+ - or mixed V 3+ /Fe 3+ -oxides in anoxic groundwater, which is consistent with results of a previous study. The fact that V appears insoluble in anoxic (Fe reducing) redox conditions indicates that the behavior of V is different than arsenic (As) in aquifer systems where the reductive dissolution of Fe-oxides with As adsorbed to the surface is a well-documented mechanism for increasing As concentrations in groundwater. This hypothesis is supported by the relation of V to As concentrations in oxic versus anoxic redox conditions. Sequential extraction procedures (SEP) applied to aquifer material showed that the greatest amount of V was recovered by the nitric acid (HNO 3 ) extract (37–71%), followed by the oxalate-ascorbic acid extract (19–60%) and the oxalate extract (3–14%). These results indicate that V was not associated with the solid phase as an easily exchangeable fraction. Although the total amount of V recovered was greatest for the HNO 3 extract that targets V adsorbed to sorption sites of crystalline Al, Fe and Mn oxides, the greatest V saturation of sorption sites appeared to occur on the amorphous and poorly crystalline oxide solid phases targeted by the oxalate and oxalate-ascorbic acid extracts respectively. Adsorption isotherm experiments showed no correlation between V sorption and any of the fractions identified by the SEP. This lack of correlation indicates the application of an SEP alone is not adequate to estimate the sorption characteristics of V in an aquifer system.

California↗
USGS1969

Structural geology of the Quad-Wyoming-Line Creeks area, Beartooth Mountains, Montana

The Quad-Wyoming-Line Creeks area is in the northeastern part of the Beartooth Mountains of Montana. The rocks of the area consist mainly of banded migmatite, granitic gneisses, amphibolite, quartzite, and agmatite; small amounts of biotite schist and biotite gneiss, iron-silicate rocks, ultramafic rocks, mafic dikes, and felsic porphyries are also present. Quartzite outcrops continuously around the major folds, and agmatite is especially widespread in the axial zone of a major anti-form. Two fold sets have been revealed by detailed mapping (scale 1:7200) and statistical analysis of the penetrative subfabric elements. The large later folds, F 2 , are the south-plunging Quad Creek synform and the south-southwest-plunging Wyoming Creek antiform; they are nearly upright and non-isoclinal. A metanorite intrusion is located in the axial zone of the Quad Creek synform. Small F 2 fold style varies from similar in relatively ductile rocks to open, concentric folds in non-ductile rocks. Only one large F 1 , located immediately north of the metanorite pluton, has been mapped. F 1 folds are characteristically similar in style. Refolding of small F 1 folds by small F 2 folds has been observed throughout the map area. Statistical analysis of the compositional layering, So, and the axial planes of small F 1 folds, S 1 , shows that the πS 0 - and πS 1 -axes constructed in the Wyoming Creek antiform are nearly coincident with each other and with south-southwest-plunging maxima of small F 2 fold axes, B 2 . Both B 2 and the axial planes of F 2 folds, S 2 , are dispersed, showing that the later folds are noncylindrical and nonplane. The axes of small F 1 folds, B 1 , are generally dispersed along well defined π-girdles. B 1 and B 2 maxima are generally coincident at some stations in the Wyoming Creek antiform-axial zone, suggesting that B 1 and B 2 are, at least locally, collinear. The long axes of hornblende crystals, L 1 , are also dispersed, but are not parallel to B 1 ; the L 1 -subfabric appears to indicate that L 1 developed during the F 1 folding but plunged somewhat more steeply to the south-southwest to south than Bi and that the F 2 folds are concentric rather than similar in the amphibolite. In the Quad Creek synform (F 2 ), all of the above-mentioned fabric elements diverge around the north side of the metanorite body. The Precambrian deformational history of the present map area, and probably the remainder of the eastern Beartooth Mountains, appears to be comprised of two phases of folding. During the first phase (F 1 ) south-southwest plunging, isoclinal or nearly isoclinal folds formed by passive flow during metamorphism to at least the upper amphibolite facies; these F, folds were not upright and may have been nearly recumbent. L 1 was formed during this phase. Metamorphic differentiation of a sedimentary sequence occurred at this time, but it is not clear whether any new material was added. The second phase of deformation is characterized by upright, non-isoclinal folds which also formed about south-southwest to south plunging axes. Flexural flow was the dominant mechanism in the development of the Quad Creek synform and the Wyoming Creek antiform, but passive flow was important in layers of ductile rocks. Granitization was generally synchronous with the F 2 phase; pegmatite dikes were emplaced later in a passive manner. Quartzite and amphibolite acted as resisters to granitization; their termination in granitic gneisses and migmatites is usually most adequately explained by refolding rather than granitization of the quartzite. It is possible that partial melting occurred in some areas such as the agmatized zones. Time of emplacement of the metanorite body is still questionable, but it clearly predates the F 2 folding; intrusion prior to F 1 is probable because B 1 , B 2 , and L 1 diverge in the vicinity of the body.

Montana↗