USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Research of the U.S. Geological Survey”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,697 records · Page 13Linked to original sources
USGS2026

Geophysical architecture and geochronology of the Neoarchean Mentor anorthosite intrusive complex, northwestern Minnesota: Largest anorthosite complex of the Superior Province?

The Neoarchean Mentor anorthosite intrusive complex (MAIC) lies within the Wawa subprovince in northwestern Minnesota, in a region where the Wawa, Quetico, and Wabigoon subprovinces are juxtaposed in close proximity. Archean rocks are entirely concealed, and interpretations are developed from aeromagnetic, gravity, and borehole samples. The MAIC includes both anorthosite (dense, weakly magnetized) and oxide-rich gabbro (strongly magnetized) lithologies. Anorthosite is coarse-grained to megacrystic, intensely altered, and locally brecciated. Pervasive epidote alteration enhanced the density of the anorthosite via introduction of higher-density mineral assemblages, explaining why the MAIC produces a significant gravity high. Oxide-rich gabbro forms a border phase of the MAIC and has potential for vanadium, chromium, and titanium mineralization, and produces a strong aeromagnetic high. The MAIC is interpreted to extend over an area of 640 km 2 , making it the largest known anorthosite complex of the Superior Province, as measured by preserved areal extent. Modeling indicates the MAIC extends more than 6 km into the subsurface. A new Pb–Pb zircon age of 2737.2 ± 4.5 Ma is interpretated as the crystallization age of anorthosite within the MAIC, showing that the MAIC formed well before the ca. 2690 Ma Shebandowanian orogeny, and raising new questions about correlations with other parts of the Wawa subprovince. A low-density batholith, here informally called the Fertile batholith, is interpreted to intrude the southern part of the MAIC. A new Pb–Pb zircon age of 2701.1 ± 6 Ma is interpreted as the magmatic age of the Fertile batholith.

Minnesota↗
USGS2026

Top-down targeted network analysis of critical mineral commodities applied to international geochemistry database

The global demand for critical mineral commodities is rapidly increasing, making domestic production an important factor in supporting the economy and national security. Large scale, publicly available geochemical databases allow for the application of data informatics methods to interrogate critical mineral commodities data for correlations in deposit formation and distribution, particularly for identifying enrichment of multiple critical mineral commodities at the same deposit. In this study, we applied network analysis to the Critical Minerals Mapping Initiative (CMMI) ore geochemistry (Critical Minerals in Ores, CMiO) database to identify the high concentration (defined as 10× bulk crustal abundance) co-occurrence of different critical mineral commodities across a mineral system hierarchy from deposit environments to individual deposits. Identifying patterns or unique outliers in enrichment in network communities will allow for the location of secondary critical mineral commodity resources from under-utilized deposits. We find trends in the enrichment of critical mineral commodities in network-communities between the elements praseodymium (Pr), neodymium (Nd), terbium (Tb), and dysprosium (Dy) across multiple CMiO database deposit environments and groups down to specific deposit types and sites. A separate trend in network community deposition is observed as well between iridium (Ir) and platinum (Pt) in deposit environments, groups, types, and sites. Network analysis focused on critical minerals in magmatic-hydrothermal deposits identified multiple deposit sites from different deposit types within the CMiO database with concentrations of Dy, Nd, Tb, Pr, Ir, and Pt that are at least ten times greater than the crustal average. This approach can be applied to any target element(s) or deposit(s) of interest, allowing broad investigation of co-enriched critical mineral commodities.

Journal of Geochemical Exploration↗
USGS2024

Joint pilot fish habitat framework

This story map will take you through the process of exploring and testing methods necessary for a higher resolution, seamless fish habitat assessment across both inland and estuarine waters through the lens of our joint pilot assessment Fish habitat assessments attempt to relate past, current, or future landscape conditions to the state of fish species occurrence, distribution, abundance, or community and habitat condition in streams, rivers, or estuaries. Previous fish habitat assessments, such as the National Fish Habitat Assessment, conducted separate and disconnected assessments for inland waters and estuaries. In this project, National Oceanic and Atmospheric Administration ( NOAA ) and U.S. Geological Survey ( USGS ) researchers created a seamless spatial framework to allow assessments that integrate influences on fish habitat from headwaters to the estuary. This effort began when the Chesapeake Bay Program Fish Habitat Action Team expressed interest in a Baywide fish habitat assessment spanning tidal salt, tidal fresh, warm non-tidal, and cold non-tidal waters. However, the complexity of the myriad of implementation details to consider when developing such an assessment necessitated the need for a tributary-specific pilot assessment. To conduct this pilot assessment, a NOAA/USGS joint partnership was formed with cooperation and support from the Chesapeake Bay Agreement and Chesapeake Bay Fish Habitat Action Team (FHAT).

Maryland↗
USGS2024

Complex hydrology and variability of nitrogen sources in a karst watershed

Streams draining karst areas with rapid groundwater transit times may respond relatively quickly to nitrogen reduction strategies, but the complex hydrologic network of interconnected sinkholes and springs is challenging for determining the placement and effectiveness of management practices. This study aims to inform nitrogen reduction strategies in a representative agricultural karst setting of the Chesapeake Bay watershed (Fishing Creek watershed, Pennsylvania) with known elevated nitrate contamination and a previous documented groundwater residence time of less than a decade. During baseflow conditions, streamflow did not increase with drainage area. Headwaters and the main stem lost substantial flow to sinkholes until eventually discharging along large springs downstream. Seasonal hydrologic conditions shift the flow and nitrogen load spatially among losing and gaining stream sections. A compilation of nitrogen source inputs with the geochemistry and the pattern of enrichment of δ 15 N and δ 18 O suggest that the nitrogen in streams and springs during baseflow represents a mixture of manure, fertilizer, and wastewater sources with low potential for denitrification. The pH and calcite saturation index increased along generalized flow paths from headwaters to springs and indicate shorter groundwater residence times in baseflow during the spring versus summer. Given the substantial investment in management practices, fixed monitoring sites could incorporate synoptic water sampling to properly monitor long-term progress and help inform management actions in karst watersheds. Although karst watersheds have the potential to respond to nitrogen reduction strategies due to shorter groundwater residence times, high nitrogen inputs, effectiveness of conservation practices, and release of legacy nutrients within the karst cavities could confound progress of water quality goals.

Pennsylvania↗
USGS2025

Land application of drill waste: A scope analysis

Drilling fluid waste land application, a process where drilling wastes are spread and tilled into the land surface, has become common in some petroleum-producing states, however, the potential benefits and risks of this practice are not well studied. Drilling fluids can be water- or oil-based and can have high concentrations of total soluble salts and total petroleum hydrocarbons. Comprehensive chemical characterization of these fluids is not well documented in the literature, and the extent of land application is largely unknown. We hypothesized that the land application of drill waste would fluctuate over time due to economic factors. To begin to understand the extent of historical and potential future land application, we analyzed data from over 5,800 drilling fluid land application permits collected by the Oklahoma Corporation Commission for years 2000, 2005, 2010, and 2015–2020. During the years studied, drilling fluid wastes were applied to more than 250,000 acres in Oklahoma, with over 54,000 thousand barrels (Mbbl) of liquids and nearly 21,000 Mbbl of solids applied. Land application is widespread (occurring in 59/77 counties), however recent drilling activity, land availability, and the economics of transportation have created conditions favorable for land application specifically in the Anadarko Basin. Land application can co-occur with sensitive areas, such as important groundwater and surface-water drinking sources and agricultural fields used for subsistence or feed crop production. Our approach for quantifying the extent of land application, along with further chemical characterization studies, can aid operators and land managers who are considering this practice in assessing the associated benefits and risks.

Oklahoma↗
USGS2025

Concentration-discharge relations and transient metal loads reveal spatiotemporal variability in solute-generation mechanisms in a mine-affected watershed

Concentration-discharge (CQ) relations are commonly used to understand geochemical and hydrologic controls on the generation of solutes in watersheds. Despite the widespread application of CQ relations, this technique has been infrequently applied to acid mine drainage (AMD) sites, but the CQ framework may allow mechanistic understanding of remedial outcomes such as impoundment of water within underground mines. Results of CQ analyses and changes in metal loads in an AMD affected watershed in Colorado, USA indicate that dissolved loads increased at many individual locations following water impoundment within mine workings. Although increased loads were observed at most individual locations, these increases were offset by a large decrease in loading from the largest mine. A loading analysis that included data from an instream monitoring location showed a statistically significant decrease in Fe and Zn after bulkhead emplacement, indicating a net positive effect of bulkheads. Streams generally displayed dilution CQ patterns whereas mines and springs showed either flushing or chemostatic patterns prior to bulkheading, which transitioned to chemostatic patterns following bulkheading, indicating a transition from dynamic to equilibrium geochemical processes. Saturation indices for sulfide and secondary minerals indicated that mines and springs were near equilibrium for phases including schwertmannite, fluorite, and gypsum. Saturation indices vary through time for mines suggesting progressive leaching of sulfide minerals as the mass of available minerals in the mine workings decreases. Together, these diverse analyses provide an integrated understanding of the variability in solute generating processes in this watershed and may inform remediation plans for similarly affected sites by indicating the nature of mineralogic controls on water quality.

Colorado↗
USGS2026

Quantitative mineral resource assessment of lithium pegmatite deposits in the northern Appalachian orogen, USA

Lithium demand is projected to increase more than 48 times by 2040 due to electric vehicle production and other energy storage needs. Most lithium production is outside of the USA, thereby increasing supply chain vulnerability. The combined end use importance and heightened supply risk of lithium make this lightest metallic element a critical commodity to the USA. To mitigate this supply risk, the US Geological Survey is actively assessing lithium deposits in the USA. Herein, we detail an assessment for lithium-mineralized pegmatites in the US northern Appalachian Mountains. Permissive tracts were generated by cross-referencing tectonic and geologic maps and mineral occurrence data with mappable criteria derived from generalized and region-specific lithium pegmatite ore deposit models; tracts were then ranked as having high, medium, or low permissibility. Available geophysical and geochemical data were found to be of minimal utility for this deposit type at the scale of the assessment. The number of undiscovered deposits were estimated and integrated into probabilistic simulations, which included an expanded and updated global grade and tonnage model of pegmatite-hosted lithium ore. The estimated total amount of undiscovered resources for the northern Appalachian Orogen has a median value of 1,410,000 metric tons of Li 2 O when considering moderate correlation across sub-regions. At a confidence level of 90%, a resource of at least 90,000 metric tons of Li 2 O remains undiscovered, and at a 10% confidence level, a resource of as much as 7,380,000 metric tons Li 2 O remains undiscovered. After applying an up-to-date economic filter to convert median contained lithium to recoverable material, a correlated total of 900,000 metric tons of Li 2 O may be economically extractable, equating to enough Li 2 O to provide the current annual US lithium supply deficit (presently obtained through net imports) for 127 years at 2025 rates of apparent consumption. This period of provision will inevitably shorten with projected increasing consumption rates, emphasizing that further research could be completed to better delineate regions of high lithium resource potential and support exploration and domestic production.

Connecticut, Delaware, Maine, Massachusetts, New H↗
USGS2024

Remote sensing evapotranspiration in ensemble-based framework to enhance cascade routing and re-infiltration concept in integrated hydrological model applied to support decision making

Integrated hydrological models (IHMs) help characterize the complexity of surface–groundwater interactions. The cascade routing and re-infiltration (CRR) concept, recently applied to a MODFLOW 6 IHM, improved conceptualization and simulation of overland flow processes. The CRR controls the transfer of rejected infiltration and groundwater exfiltration from upslope areas to adjacent downslope areas where that water can be evaporated, re-infiltrated back to subsurface, or discharged to streams as direct runoff. The partitioning between these three components is controlled by uncertain parameters that must be estimated. Thus, by quantifying and reducing those uncertainties, next to uncertainties of the other model parameters (e.g. hydraulic and storage parameters), the reliability of the CRR is improved and the IHM is better suited for decision support modelling, the two key objectives of this work. To this end, the remotely sensed MODIS-ET product was incorporated into the calibration process for complementing traditional hydraulic head and streamflow observations. A total of approximately 150,000 observations guided the calibration of a 13-year MODFLOW 6 IHM simulation of the Sardon catchment (Spain) with daily stress periods. The model input uncertainty was represented by grid-cell-scale parameterization, yielding approximately 500,000 unknown input parameters to be conditioned. The calibration was carried out through an iterative ensemble smoother. Incorporating the MODIS-ET data improved the CRR implementation, and reduced uncertainties associated with other model parameters. Additionally, it significantly reduced the uncertainty associated with net recharge, a critical flux for water management that cannot be directly measured and rather is commonly estimated by IHM simulations.

Sardon catchment↗
USGS2025

Meet the people where they are: Assessing user needs for aftershock forecast products in El Salvador, Mexico and the United States

Aftershock forecasts can help communities reduce their seismic risk by conveying how many aftershocks can be expected following a large earthquake, and how the expected number of aftershocks and their corresponding ground shaking evolves over time and space. Prior work finds that graphical forecast products may communicate such information better than only text or numbers. To identify which visual products can serve multiple user groups, we held workshops with members of several professions, including emergency managers, engineers, critical infrastructure operators, public health specialists, science communicators, and more. We conducted these workshops in El Salvador, Mexico and the United States to understand which forecast products may be effective across different countries. In these workshops, users performed small-group activities to elicit the types of aftershock forecast information that would support decisions in their respective roles and how this information would optimally be displayed. Maps of shaking hazards were frequently requested across all professions and countries, even for dissimilar forecast uses. The design of these maps, and other product needs, were differentiated by profession, country and other factors. Other forecast products, including those showing forecasts about the magnitudes and time periods of future aftershocks, also served a variety of users, but for different types of decisions. We found a greater variation in user needs by profession than by country, and that user needs also vary with time, communication channel and other contextual factors. We discuss practical implications for user-centered visual communication of operational aftershock forecasts.

International Journal for Disaster Risk Reduction↗
USGS2026

Distinguishing natural from mining-related metal sources by including streambank groundwater data in a stream mass loading study

Distinguishing stream metal loading caused by mine features from that caused by natural background sources remains challenging, yet this distinction is essential for making effective remedial decisions at many legacy mine sites. We combine a stream tracer injection and synoptic sampling study with data from shallow near-stream groundwater wells to estimate left-bank versus right-bank metal loading contributions at the 100-m spatial scale. The study was performed in the East Mancos River, a mountain headwater stream in Colorado, USA. The dominant source of elevated stream metal concentrations could be either groundwater infiltration through right-bank Doyle Mine waste piles or natural acid rock drainage from hydrothermally altered bedrock located mainly on the left bank. For the five metals of concern (Cu, Al, Zn, Cd, and Mn), we find that 15 % of the load contributed by diffuse groundwater inputs in the section potentially influenced by Doyle mine waste originates from the right bank. This right-bank potential mine contribution equates to only 3 % of the total watershed instream load for these metals. Furthermore, apparent 3 H/ 3 He groundwater ages in segments contributing most of the right-bank metal loading are sufficiently old (9–12 yr) to suggest that infiltration through the waste piles, located only 140–180 m from the stream, is unlikely. Estimated potential Doyle mine loading contributions can therefore be considered maximum values. Study results thus indicate that Doyle mine waste piles are a minor source of metal loading under low-flow conditions, and streambank groundwater data can provide valuable additional information in stream mass loading studies.

Colorado↗
USGS2026

Effect of mineral deposit data on predictions from the three-part approach to quantitative mineral resource assessment—A study of 16 previous U.S. Geological Survey assessments

The three-part approach to quantitative mineral resource assessment requires information about the properties of undiscovered mineral deposits in an assessment area. These properties are unknown, so the properties of discovered mineral deposits of the same mineral deposit type are used instead. In the three-part approach, these discovered mineral deposits come from around the world, and their properties constitute the pooled data for that mineral deposit type. Alternatively, these discovered mineral deposits could come from the assessment area, and their properties constitute the tract data for that mineral deposit type. Tract data may be more representative of the undiscovered mineral deposits in the assessment area than the pooled data. The goal of this study was to determine whether resource predictions using pooled data are equivalent to resource predictions using tract data. To this end, 16 previous U.S Geological Survey assessments were studied. For each assessment, resources were predicted for one undiscovered mineral deposit in the assessment area. One set of predictions used pooled data, and another used tract data. The two sets of predictions were compared with an equivalence test, using the six assessment statistics that are commonly reported for mineral resource assessments. Practical equivalence is the condition that two corresponding assessment statistics are within a factor of 1.5 of one another. For each of 2 assessments, all 6 assessment statistics were practically equivalent. For both assessments, the assessment statistics from the pooled data, relative to the corresponding assessment statistics from the tract data, ranged from 1.30 times smaller to 1.03 times larger. For each of 14 assessments, 1 or more of the 6 assessment statistics were not practically equivalent. The assessment statistics from the pooled data, relative to the corresponding assessment statistics from the tract data, ranged from 26.6 times smaller to 5.53 times larger. The use of pooled data has been a standard procedure in the three-part approach since at least 1986. The 16 assessments in this study are not a representative sample of those prior assessments that used pooled data. So, it is inappropriate to use the study results to infer whether pooled data affected the resource predictions for those prior assessments.

Scientific Investigations Report↗
USGS2025

Identification of representative earthquakes for probabilistic tsunami hazard analysis (PTHA) using earthquake rupture forecasts and machine learning

As probabilistic tsunami hazard analysis (PTHA) focuses more on assessments for localized, populous regions, techniques are needed to identify a subsample of representative earthquake ruptures to make the computational requirements for producing high-resolution hazard maps tractable. Moreover, the greatest epistemic uncertainty in seismic PTHA is related to source characterization, which is often poorly defined and subjective. We address these two salient issues by applying streamlined earthquake rupture forecasts (ERFs), based on combinatorial optimization methods, to an unsupervised machine learning workflow for identifying representative ruptures. ERFs determine the optimal distribution of a millennia-scale sample of earthquakes by inverting the observed slip rate on major faults. We use two previously developed combinatorial optimization ERFs, integer programming and greedy sequential, to produce the optimal location of ruptures with seismic moments sampled from a regional Gutenberg–Richter magnitude–frequency distribution. These ruptures in turn are used to calculate peak nearshore tsunami amplitude, using computationally efficient tsunami Green's functions. An unsupervised machine learning workflow is then used to identify a small subsample of the earthquakes input to ERFs for onshore PTHA analysis. We eliminate epistemic uncertainty related to source distribution under traditional PTHA analysis; in its place, a quantifiable, less subjective and generally smaller uncertainty related to the input to ERFs is included. The Nankai subduction zone is used as a test case, where previous ERFs have been conducted. Results indicate that the locations of representative earthquakes are sensitive to choice of magnitude–area relation and to whether a minimum cumulative stress objective is imposed on the fault. In general, incorporating ERFs into PTHA provide a physically self-consistent method to incorporate fault slip information in determining representative earthquakes for onshore PTHA, eliminating a major source of epistemic uncertainty.

Nankai subduction zone↗
USGS2025

A spatiotemporal deep learning approach for predicting daily air-water temperature signal coupling and identification of key watershed physical parameters in a montane watershed

Seasonal shifts from runoff to groundwater dominance influence daily headwater stream temperatures, especially where local groundwater input is strong. This input buffers temperature during hot periods, supporting cold-water habitats. Recent studies use air–water temperature signal metrics to identify zones of strong stream–groundwater connectivity. While Previous studies used air–water signal ratios as proxies for groundwater influence but were limited to specific sites and periods, without dynamic forecasting. This study is the first to forecast daily A r as a spatiotemporal signal using a Graph Convolutional Network–Long Short-Term Memory (GCN-LSTM) model. The model was trained using hydroclimate data (air temperature, precipitation, shortwave radiation, streamflow) and watershed physical features (e.g., sand content, slope). Results showed high predictive skill, achieving R 2 (NSE, RMSE) of 0.86 (0.73, 0.0004) for one-day-ahead to 0.52 (0.50, 0.0009) for seven-days ahead forecasts. Prior studies often have not explicitly incorporated spatial hydrogeologic drivers, but this model explicitly incorporates them to assess their impact on A r forecasting and stream-groundwater connectivity. Feature analysis identified mean sand, elevation, slope, clay, and TWI as key predictors of A r . Stronger groundwater signals appeared in hillslopes, elevations, and tributaries, highlighting watershed influence on streamflow. However, limitations include reliance on historical air–water temperature patterns for training and limited representation of extreme climate conditions. Despite these limitations, unlike previous studies relying on measured in-situ stream and air temperature, this study forecasts A r directly from climate and physiographic features after training, avoiding in-situ data requirements. Findings aiding predictions of stream ecosystem resilience.

New York↗
USGS2024

Framework for implementing damping scaling factors in U.S. Geological Survey National Seismic Hazard Models

Traditionally, probabilistic seismic hazard analysis (PSHA) has focused on calculating ground motion hazard curves for elastic, 5%-damped pseudo spectral accelerations, Sa(T,5%), which are used as the basis for engineering design parameters and targets for ground motion selection and modification. However, structures and geotechnical systems can exhibit a wide range of damping ratios both above and below the 5% level, depending on the construction material, structural system, nonstructural elements, or subsurface soil properties. When spectral parameters at such damping levels are required for certain applications, 5%-damped accelerations have traditionally been extracted from PSHA-based hazard curves and adjusted outside of the hazard integral using damping scaling factors (DSF) such as those from Newmark & Hall (1982). Recent advances in the development of more rigorous and comprehensive damping scaling models (e.g., Rezaeian et al., 2014; Rezaeian et al., 2021) have allowed for the modeling of means and standard deviations of DSFs as functions of earthquake source and path properties for crustal, intraslab, and subduction interface tectonic environments. These DSF models can be applied to ground motion model (GMM) estimates of Sa(T,5%) for a given earthquake rupture scenario to produce a corresponding mean and standard deviation Sa at a specified damping ratio β, Sa(T,β). In this study, the DSF models of Rezaeian et al. (2014) and Rezaeian et al. (2021) are implemented within the U.S. Geological Survey National Seismic Hazard Model (NSHM) PSHA framework to calculate probabilistic hazard curves for spectral accelerations at damping ratios from 0.5% to 30%. The DSF models are applied directly to the mean and standard deviation of Sa(T,5%) predictions from each GMM in the NSHM logic tree. Resulting hazard curves and uniform hazard and risk spectra for Sa(T,β) are presented for several geographic locations and compared with corresponding spectra estimated using current design practices by applying the same DSFs outside of the PSHA calculation. Key differences between the two methods for estimating Sa(T,β) are discussed, and potential strategies are presented for the implementation and usage of the hazard-consistent Sa(T,β) in building codes. Comparing the results to those from DSFs used in current design practices that are mainly based on Newmark & Hall (1982) is not explored in this study.

Conference Paper↗
USGS2025

Three-dimensional seismic velocity model for the Cascadia Subduction Zone with shallow soils and topography, version 1.7

The U.S. Geological Survey’s seismic velocity model for the Cascadia Subduction Zone provides P- and S-wave velocity ( V P and V S , respectively) information from 40.2° to 50.0° N. latitude and −129.0° to −121.0° W. longitude, and is used to support a variety of research topics, including three-dimensional (3D) earthquake simulations and seismic hazard assessment in the Pacific Northwest. This report describes an update to the previous version (v) 1.6 of the 3D seismic velocity model for the Cascadia Subduction Zone. This new model (herein referred to as v1.7) contains more detailed near-surface structure for improved earthquake ground motion modeling. Updated features include the addition of a new shallow soil velocity model in the top few hundred meters and the option of adding user-specified topography. Although v1.6 of the Cascadia seismic velocity model has a minimum V S of 600 meters per second (m/s), the new model (v1.7) has a minimum V S of approximately 40 m/s. Overall, this update will allow for more accurate ground motion estimates from 3D simulations of scenario earthquakes in the Cascadia Subduction Zone region.

British Columbia, California, Oregon, Washington↗
USGS2026

Deep subsurface organic-rich shale supports abundant, diverse, and novel fungi

As Earth’s principal reservoir of organic carbon and microbial biomass, the deep subsurface hosts microorganisms capable of mobilizing this once-sequestered carbon. Contrary to standard assumptions of eukaryotic scarcity, this study documents abundant fungal communities, ranging from 4.2 × 10 3 to 6.8 × 10 3 fungal cells mL −1 , across a methane-producing organic-rich shale 247–556 meters below the surface. Although fungal:bacterial cell ratios ranged from 1:7028 to 1:713, application of biomass conversion factors developed for oceanic systems yielded a median fungal:bacterial biomass ratio of 1:4.7. 16S rRNA gene amplicons revealed bacterial and archaeal communities mirroring those found in well-characterized extremophilic, carbon-degrading environments, while sequencing of 18S rRNA gene and ITS rRNA spacer amplicons collectively identified a eukaryotic hotspot with 689 fungal OTUs across six phyla. The dominant fungal classes, Agaricomycetes and Dothideomycetes, are well-established degraders of recalcitrant carbon compounds at the surface, suggesting they may similarly contribute to organic matter degradation and ecosystem maintenance in the subsurface. Cultivation and isolation efforts yielded 205 fungal strains, including 13 candidate novel taxa, underscoring the deep subsurface as an underexplored eukaryotic habitat. Stable carbon isotopes indicate methane is predominantly generated via microbial conversion of the fossil carbon, while water isotopes suggest in situ geochemical conditions have been relatively stable since the Late Pleistocene, with subglacial recharge as a plausible mechanism for microbial introduction. Collectively, these findings suggest that fungi are underrecognized contributors to organic matter transformation and functional diversity in the deep biosphere, revealing a critical gap in our understanding of deep subsurface ecosystem processes.

Indiana, Michigan, Ohio↗
USGS2026

Northern bobwhites select for native grasses on working grazing land

Northern bobwhite ( Colinus virginianus ; bobwhite) populations have experienced an 85% decline across most of its range since the 1960s. The most drastic decreases have been in the southeastern United States where biologists attribute the decline to widespread habitat loss, including conversion of native grasslands to tall fescue ( Lolium arundinaceum ) and other exotic cool-season grass (CSG) pasture and hayfields. Including agricultural lands in conservation programs could improve habitat conditions on a regional scale. One working-lands conservation strategy involves the use of native warm-season grasses (NWSGs) rather than cool-season exotic grasses as economically viable cattle forage. To evaluate this management practice for creating bobwhite habitat, we conducted a field study on a bobwhite population in eastern Kentucky, USA, where grazed NWSG and burned NWSG fields were adjacent to exotic grazed and exotic hayed CSG fields. Between April 2019 and October 2022, we used radio telemetry to track bobwhites to evaluate resource selection at second- and third-order scales. Bobwhites used traditionally managed CSGs less than would be expected by chance at the second-order scale in both breeding and non-breeding seasons. Bobwhite use of grazed NWSG and burned NWSG was greater than would be expected by chance at the second-order scale in both breeding and non-breeding seasons. Similarly, at the third-order scale, bobwhites used CSGs less than would be expected by chance, whereas NWSGs and woody stems were used more than by chance alone. Our study suggests that bobwhites select NWSGs at multiple spatial scales despite broad-scale availability of managed exotic CSGs. Under a working-lands framework, the integration of NWSGs into working lands could create bobwhite habitat in the southeastern United States, especially if woody stems are present.

Kentucky↗
USGS2026

Discrete element investigation of the influence of shallow soil density on the manifestations of strike-slip surface fault rupture

This study investigates the influence of soil relative density on strike-slip surface fault rupture manifestations using three-dimensional numerical simulations performed with the discrete element method (DEM). The simulations capture the formation of distinctive fault strands within complex flower structures using tens of millions of grains. The tendency for dense soils to localize shear manifests as multiple localized shear bands within wide zones of deformation in strike-slip fault rupture, whereas diffuse shear deformation develops within narrow zones in loose soils. The spatial extents of soil deformation are consistent between simulations having similar relative densities but with different quantities of grains. However, individual shears are more distinguishable in assemblages of finer grains than in assemblages of coarser grains. The simulations show the progressive development of new shears within the bounds of previously developed shears. Shear activity transitions inward as fault activity diminishes along the outermost shears and continues along newly developed shears until a vertically dipping throughgoing shear structure develops that accommodates most of the fault displacement thereon. The throughgoing fault develops at smaller fault displacements in looser soils because the first shear rupture propagates closer to the vertical direction and does not undergo as much inward translation of shear activity, as is observed in denser soils. In all simulations, ground surface uplift develops between nonintersecting active shears, and ground surface subsidence tends to develop where new shears intersect previous shears. The surface traces in these simulations are shown to be consistent with analog models and case histories of surface fault rupture occurring in different shallow subsurface materials. Although computationally costly, these modeling results are valuable for providing a strong numerical supplement to traditional analog models used to represent the mechanics of strike-slip zones in soil, and they provide quantifiable stresses and large-strain deformations throughout the model domain.

Journal of Geotechnical and Geoenvironmental Engin↗