SEARCH · USGS Science

Results for “Geothermics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13Linked to original sources

USGS2008

Establishing major permeability controls in the Mak-Ban geothermal field, Philippines

Recent updating of the conceptual model of the Mak-Ban (Bulalo) geothermal field verified both structural and stratigraphic controls on permeability and connectivity in the reservoir. Two silicic units within the predominantly andesitic production zone were identified from borehole logs, core and drill cuttings. Whole rock chemical data and petrographic analysis confirmed two rhyolite units that consist of partially welded ash-flow tuffs and lava with primary devitrification and vapor-phase alteration textures typical of subaerial rhyolites. U/Pb dating of zircons from the units showed two distinct episodes of silicic volcanism at 352 ± 16 ka and 501 ± 12 ka, respectively. A recent drilling campaign allowed the running of more gamma ray (GR) in tandem with PTS logs. The logs validated the presence of two units with high GR response generally coinciding with permeable zones just below the interpreted top of the reservoir. Naphthalene disulfonate tracer testing defined a predominantly fault-controlled flow path of fluids from the edges of the field into the central production area. Fifteen to 25% of injected tracers were recovered in production wells over a five-year monitoring period. Peak arrival of tracer returns indicated average speeds between 0.1 to 1.3 m/hr, allowing for sufficient time for the fluids to heat up prior to re-emergence in production wells. Although faults are known to be important pathways in most geothermal reservoirs, the identification of specific structures with high connectivities in Mak-Ban provide an important insight on fluid migration from peripheral areas. This information is critical in preparing a reservoir management strategy for addressing the entry of cool marginal recharge into the center of the field.

Mak-Ban geothermal field↗

USGS2008

Isotopic constraints on the chemical evolution of geothermal fluids, Long Valley, CA

A spatial survey of the chemical and isotopic composition of fluids from the Long Valley hydrothermal system was conducted. Starting at the presumed hydrothermal upwelling zone in the west moat of the caldera, samples were collected from the Casa Diablo geothermal field and a series of monitoring wells defining a nearly linear, ~14 km long, west-to-east trend along the proposed fluid flow path (Sorey et al., 1991). Samples were analyzed for the isotopes of water, Sr, Ca, and noble gases, the concentrations of major cations and anions and total CO 2 . Our data confirm earlier models in which the variations in water isotopes along the flow path reflect mixing of a single hydrothermal fluid with local groundwater. Variations in Sr data are poorly constrained and reflect fluid mixing, multiple fluid-pathways or water-rock exchange along the flow path as suggested by Goff et al., (1991). Correlated variations among total CO 2 , noble gases and the concentration and isotopic composition of Ca suggest progressive fluid degassing (loss of CO 2 , noble gases) driving calcite precipitation as the fluid flows west-to-east across the caldera. This is the first evidence that Ca isotopes may trace and provide definitive evidence of calcite precipitation along fluid flow paths in geothermal systems.

California↗

USGS2022

Exploring declustering methodology for addressing geothermal exploration bias

Geothermal resources assessments use data that are unevenly distributed in space, with more data collected in areas with known thermal features. To meet the assumptions for geostatistical modeling (e.g., variography and kriging) such as having a random sample representative of the population, declustering may be needed to correct for spatial sample bias. Several declustering methods exist and to understand how best to use these methods, we apply these to real data and samples of that data. The work described herein summarizes the application of cell-based declustering to shallow temperature data (~20 cm) collected in a survey across a thermal feature in the Lower Geyser Basin, Yellowstone National Park, Wyoming. The sample dataset is a regular grid (3-m spacing) of temperatures across a 72-m square area, providing a shallow, subsurface temperature dataset collected with minimal spatial bias (a few grid locations near a hot spring could not be sampled). To test the influence of sample clustering on geothermal estimates, this dense dataset is sub-sampled irregularly to evaluate bias on temperature estimation. Three sampling strategies were tested: a simple random sample, a stratified random sample, and a stratified biased random sample. The naive mean (before declustering) values for each dataset were compared to the post-declustering mean to evaluate the effectiveness of declustering on correcting the mean for spatial bias. For the limited number of sample datasets evaluated, we found that although cell-based declustering did partially correct the mean, some bias remained (i.e., the estimate was improved, but not fully corrected). It is possible that the procedure documented herein (applied here to only a few random samples) could be applied to many random samples, so that robust conclusions might be drawn (e.g., Is there always some remaining bias in declustered estimates? Does it depend on the number of sample points?). In particular, bias could be evaluated for persistency, and uncertainty could be evaluated.

Geothermal Resources Council Transactions↗

USGS2012

Composition and origin of rhyolite melt intersected by drilling in the Krafla geothermal field, Iceland

The Iceland Deep Drilling Project Well 1 was designed as a 4- to 5-km-deep exploration well with the goal of intercepting supercritical hydrothermal fluids in the Krafla geothermal field, Iceland. The well unexpectedly drilled into a high-silica (76.5 % SiO 2 ) rhyolite melt at approximately 2.1 km. Some of the melt vesiculated while extruding into the drill hole, but most of the recovered cuttings are quenched sparsely phyric, vesicle-poor glass. The phenocryst assemblage is comprised of titanomagnetite, plagioclase, augite, and pigeonite. Compositional zoning in plagioclase and exsolution lamellae in augite and pigeonite record changing crystallization conditions as the melt migrated to its present depth of emplacement. The in situ temperature of the melt is estimated to be between 850 and 920 °C based on two-pyroxene geothermometry and modeling of the crystallization sequence. Volatile content of the glass indicated partial degassing at an in situ pressure that is above hydrostatic (~16 MPa) and below lithostatic (~55 MPa). The major element and minor element composition of the melt are consistent with an origin by partial melting of hydrothermally altered basaltic crust at depth, similar to rhyolite erupted within the Krafla Caldera. Chondrite-normalized REE concentrations show strong light REE enrichment and relative flat patterns with negative Eu anomaly. Strontium isotope values (0.70328) are consistent with mantle-derived melt, but oxygen and hydrogen isotope values are depleted (3.1 and −118 ‰, respectively) relative to mantle values. The hydrogen isotope values overlap those of hydrothermal epidote from rocks altered by the meteoric-water-recharged Krafla geothermal system. The rhyolite melt was emplaced into and has reacted with a felsic intrusive suite that has nearly identical composition. The felsite is composed of quartz, alkali feldspar, plagioclase, titanomagnetite, and augite. Emplacement of the rhyolite magma has resulted in partial melting of the felsite, accompanied locally by partial assimilation. The interstitial melt in the felsite has similar normalized SiO 2 content as the rhyolite melt but is distinguished by higher K 2 O and lower CaO and plots near the minimum melt composition in the granite system. Augite in the partially melted felsite has re-equilibrated to more calcic metamorphic compositions. Rare quenched glass fragments containing glomeroporphyritic crystals derived from the felsite show textural evidence for resorption of alkali feldspar and quartz. The glass in these fragments is enriched in SiO 2 relative to the rhyolite melt or the interstitial felsite melt, consistent with the textural evidence for quartz dissolution. The quenching of these melts by drilling fluids at in situ conditions preserves details of the melt–wall rock interaction that would not be readily observed in rocks that had completely crystallized. However, these processes may be recognizable by a combination of textural analysis and in situ analytical techniques that document compositional heterogeneity due to partial melting and local assimilation.

Contributions to Mineralogy and Petrology↗

USGS2006

Soluble reactive phosphorus transport and retention in tropical, rainforest streams draining a volcanic and geothermally active landscape in Costa Rica.: Long-term concentration patterns, pore water environment and response to ENSO events

Soluble reactive phosphorus (SRP) transport/retention was determined at four sites in three rainforest streams draining La Selva Biological Station, Costa Rica. La Selva is located at the base of the last remaining intact rainforest transect from 30 m above sea level to 3000 m along the entire Caribbean slope of Central America. Steam SRP levels can be naturally high there due to regional, geothermal groundwater discharged at ambient temperature. Monitoring since 1988 has revealed distinctive long-term differences in background SRP and total P (TP) for three streams in close proximity, and identified the impact of ENSO (El Nino Southern Oscillation) events on SRP-enriched reaches. Mean interannual SRP concentrations (?? standard deviation) were 89 ?? 53??g/l in the Salto (1988-1996), 21 ?? 39??g/l in the Pantano (1988-1998), and 26 ?? 35??g/l in the Sabalo (1988-1996). After January, 1997 the separate upland-lowland contributions to discharge and SRP load were determined monthly in the Salto. SRP in Upper Salto was low (19 ?? 8??g/l, 1997-2002) until enriched at the upland-lowland transition by regional groundwater. Mean SRP concentration in Lower Salto (108 ?? 104??g/l) was typically highest February-April, the driest months, and lowest July-September, the wettest. SRP concentration was positively correlated to the inverse of discharge in Lower Salto when ENSO data were omitted (1992 and 1998-1999), but not in the Upper Salto, Pantano, or Sabalo. TP was positively correlated to the inverse of discharge in all three streams when ENSO data were omitted. High SRP springs and seeps along the Lower Salto contributed 36% of discharge but 85% of SRP export 1997-2001. Annual SRP flux from the total Salto watershed (1997-2001) averaged 2.9 kg/ha year, but only 0.6 kg/ha year from the Upper Salto. A dye tracer injection showed that pore water environments were distinctly different between Upper and Lower Salto. Upper Salto had high surface water-pore water exchange, high dissolved oxygen, low SRP, and low conductivity similar to surface water, and Lower Salto had low surface water-pore water exchange, low dissolved oxygen, high SRP, and high conductivity reflecting geothermal groundwater influence. SRP export from the Salto was controlled by regional groundwater transfer, which in similar volcanic settings could be a significant P source. However, ENSO events modified the SRP concentration in the Salto suggesting that long-term monitoring is required to understand underlying SRP dynamics and P flux to downstream communities. ?? 2006 Springer Science+Business Media, Inc.

Biogeochemistry↗

USGS1985

Phase relations and adiabats in boiling seafloor geothermal systems

Observations of large salinity variations and vent temperatures in the range of 380–400°C suggest that boiling or two-phase separation may be occurring in some seafloor geothermal systems. Consideration of flow rates and the relatively small differences in density between vapors and liquids at the supercritical pressures at depth in these systems suggests that boiling is occurring under closed-system conditions. Salinity and temperature of boiling vents can be used to estimate the pressure-temperature point in the subsurface at which liquid seawater first reached the two-phase boundary. Data are reviewed to construct phase diagrams of coexisting brines and vapors in the two-phase region at pressures corresponding to those of the seafloor geothermal systems. A method is developed for calculating the enthalpy and entropy of the coexisting mixtures, and results are used to construct adiabats from the seafloor to the P-T two-phase boundary. Results for seafloor vents discharging at 2300 m below sea level indicate that a 385°C vent is composed of a brine (7% NaCl equivalent) in equilibrium with a vapor (0.1% NaCl). Brine constitutes 45% by weight of the mixture, and the fluid first boiled at approximately 1 km below the seafloor at 415°C, 330 bar. A 400°C vent is primarily vapor (88 wt.%, 0.044% NaCl) with a small amount of brine (26% NaCl) and first boiled at 2.9 km below the seafloor at 500°C, 520 bar. These results show that adiabatic decompression in the two-phase region results in dramatic cooling of the fluid mixture when there is a large fraction of vapor.

Earth and Planetary Science Letters↗

USGS1977

Fluorite solubility equilibria in selected geothermal waters

Calculation of chemical equilibria in 351 hot springs and surface waters from selected geothermal areas in the western United States indicate that the solubility of the mineral fluorite, CaF 2 , provides an equilibrium control on dissolved fluoride activity. Waters that are undersaturated have undergone dilution by non-thermal waters as shown by decreased conductivity and temperature values, and only 2% of the samples are supersaturated by more than the expected error. Calculations also demonstrate that simultaneous chemical equilibria between the thermal waters and calcite as well as fluorite minerals exist under a variety of conditions. Testing for fluorite solubility required a critical review of the thermodynamic data for fluorite. By applying multiple regression of a mathematical model to selected published data we have obtained revised estimates of the p K (10,96), ΔG o f (−280.08 kcal/mole), ΔH o f (−292.59 kcal/mole), S° (16.39 cal/deg/mole) and C o P (16.16 cal/deg/mole) for CaF 2 at 25°C and 1 atm. Association constants and reaction enthalpies for fluoride complexes with boron, calcium and iron are included in this review. The excellent agreement between the computer-based activity products and the revised p K suggests that the chemistry of geothermal waters may also be a guide to evaluating mineral solubility data where major discrepancies are evident.

Geochimica et Cosmochimica Acta↗

USGS1986

Management of the life and death of an earth-science database: some examples from geotherm

Productive earth-science databases require managers who are familiar with and skilled at using available software developed specifically for database management. There also should be a primary user with a clearly understood mission. The geologic phenomenon addressed by the database must be sufficiently understood, and adequate appropriate data must be available to construct a useful database. The database manager, in concert with the primary user, must ensure that data of adequate quality are available in the database, as well as prepare for mechanisms of releasing the data when the database is terminated. The primary user needs to be held accountable along with the database manager to ensure that a useful database will be created. Quality of data and maintenance of database relevancy to the user's mission are important issues during the database's lifetime. Products prepared at termination may be used more than the operational database and thus are of critical importance. These concepts are based, in part, on both the shortcomings and successes of GEOTHERM, a comprehensive system of databases and software used to store, locate, and evaluate the geology, geochemistry, and hydrology of geothermal systems. ?? 1986.

Computers & Geosciences↗

USGS1980

Hydraulic fracturing in granite under geothermal conditions

The experimental hydraulic fracturing of granite under geothermal conditions produces tensile fracture at rapid fluid injection rates and shear fracture at slow injection rates and elevated differential stress levels. A sudden burst of acoustic emission activity accompanies tensile fracture formation whereas the acoustic emission rate increases exponentially prior to shear fracture. Temperature does not significantly affect the failure mechanism, and the experimental results have not demonstrated the occurrence of thermal fracturing. A critical result of these experiments is that fluid injection at intermediate rates and elevated differential stress levels increases permeability by more than an order of magnitude without producing macroscopic fractures, and low-level acoustic emission activity occurs simultaneously near the borehole and propagates outward into the specimen with time. Permeability measurements conducted at atmospheric pressure both before and after these experiments show that increased permeability is produced by permanent structural changes in the rock. Although results of this study have not demonstrated the occurrence of thermal fracturing, they suggest that fluid injection at certain rates in situ may markedly increase local permeability. This could prove critical to increasing the efficiency of heat exchange for geothermal energy extraction from hot dry rock. ?? 1980.

International Journal of Rock Mechanics and Mining↗

USGS1982

Laboratory measurements of reservoir rock from the Geysers geothermal field, California

Rock samples taken from two outcrops, as well as rare cores from three well bores at the Geysers geothermal field, California, were tested at temperatures and pressures similar to those found in the geothermal field. Both intact and 30?? sawcut cylinders were deformed at confining pressures of 200-1000 bars, pore pressure of 30 bars and temperatures of 150?? and 240??C. Thin-section and X-ray analysis revealed that some borehole samples had undergone extensive alteration and recrystallization. Constant strain rate tests of 10-4 and 10-6 per sec gave a coefficient of friction of 0.68. Due to the highly fractured nature of the rocks taken from the production zone, intact samples were rarely 50% stronger than the frictional strength. This result suggests that the Geysers reservoir can support shear stresses only as large as its frictional shear strength. Velocity of p-waves (6.2 km/sec) was measured on one sample. Acoustic emission and sliding on a sawcut were related to changes in pore pressure. b-values computed from the acoustic emissions generated during fluid injection were typically about 0.55. An unusually high b-value (approximately 1.3) observed during sudden injection of water into the sample may have been related to thermal cracking. ?? 1982.

International Journal of Rock Mechanics and Mining↗

USGS2017

Thermal and petrologic constraints on lower crustal melt accumulation under the Salton Sea Geothermal Field

In the Salton Sea region of southern California (USA), concurrent magmatism, extension, subsidence, and sedimentation over the past 0.5 to 1.0 Ma have led to the creation of the Salton Sea Geothermal Field (SSGF)—the second largest and hottest geothermal system in the continental United States—and the small-volume rhyolite eruptions that created the Salton Buttes. In this study, we determine the flux of mantle-derived basaltic magma that would be required to produce the elevated average heat flow and sustain the magmatic roots of rhyolite volcanism observed at the surface of the Salton Sea region. We use a 2D thermal model to show that a lower-crustal, partially molten mush containing < 20 – 40 % "> <20–40% interstitial melt develops over a ∼ 10 5 "> ∼105 -yr timescale for basalt fluxes of 0.008 to 0.010 m 3 / m 2 / yr "> 0.010m3/m2/yr (∼0.0008 to ∼0.001 km / 3 yr "> /3yr injection rate) given extension rates at or below the current value of ∼0.01 m/yr ( Brothers et al., 2009 ). These regions of partial melt are a natural consequence of a thermal regime that scales with average surface heat flow in the Salton Trough, and are consistent with seismic observations. Our results indicate limited melting and assimilation of pre-existing rocks in the lower crust. Instead, we find that basalt fractionation in the lower crust produces derivative melts of andesitic to dacitic composition. Such melts are then expected to ascend and accumulate in the upper crust, where they further evolve to give rise to small-volume rhyolite eruptions (Salton Buttes) and fuel local spikes in surface heat flux as currently seen in the SSGF. Such upper crustal magma evolution, with limited assimilation of hydrothermally altered material, is required to explain the slight decrease in δ 18 O "> δ18O values of zircons (and melts) that have been measured in these rhyolites.

California↗

USGS2024

Ore mineralization in the Mofete and San Vito geothermal fields, Campi Flegrei volcanic complex, Naples, Italy

The Mofete and San Vito geothermal fields, located west of Naples, Italy, are part of the Campi Flegrei volcanic complex. In the 1970s, exploratory wells were drilled to a depth of ~3000 m in an attempt to locate high-enthalpy fluids for potential power production. Drill core samples from Mofete wells (MF1, MF2, and MF5) and from San Vito wells (SV1 and SV3) contain authigenic ore mineralization. Pyrite, pyrrhotite, and galena are abundant. Less common are chalcopyrite, sphalerite, arsenopyrite, and scheelite; rare are millerite, violarite, native bismuth, tellurobismuthite, cassiterite, molybdenite, and acanthite. Mineral chemistry was determined by electron microprobe wavelength dispersive spectroscopy aided by a scanning electron microscope equipped with energy-dispersive spectroscopy. The mineral assemblage suggests a low sulfidation environment and the absence of pyrrhotite in the MF1 well and upper part of the SV1 well indicates variable sulfur activity. Both molybdenite and scheelite were identified in samples SV1–2860 and SV3–2353 and scheelite in the SV3 well is zoned with variable Mo 6+ content; low Mo 6+ zones show blue cathodoluminescence, whereas, zones with high Mo 6+ content are yellow to brown. Zoned scheelite and the occurrence of both Mo-bearing minerals attest to the variability of ƒO 2 and ƒS 2 in the geothermal fluid.

Naples↗

USGS2015

Numerical modeling of injection, stress and permeability enhancement during shear stimulation at the Desert Peak Enhanced Geothermal System

Creation of an Enhanced Geothermal System relies on stimulation of fracture permeability through self-propping shear failure that creates a complex fracture network with high surface area for efficient heat transfer. In 2010, shear stimulation was carried out in well 27-15 at Desert Peak geothermal field, Nevada, by injecting cold water at pressure less than the minimum principal stress. An order-of-magnitude improvement in well injectivity was recorded. Here, we describe a numerical model that accounts for injection-induced stress changes and permeability enhancement during this stimulation. In a two-part study, we use the coupled thermo-hydrological-mechanical simulator FEHM to: (i) construct a wellbore model for non-steady bottom-hole temperature and pressure conditions during the injection, and (ii) apply these pressures and temperatures as a source term in a numerical model of the stimulation. In this model, a Mohr-Coulomb failure criterion and empirical fracture permeability is developed to describe permeability evolution of the fractured rock. The numerical model is calibrated using laboratory measurements of material properties on representative core samples and wellhead records of injection pressure and mass flow during the shear stimulation. The model captures both the absence of stimulation at low wellhead pressure (WHP ≤1.7 and ≤2.4 MPa) as well as the timing and magnitude of injectivity rise at medium WHP (3.1 MPa). Results indicate that thermoelastic effects near the wellbore and the associated non-local stresses further from the well combine to propagate a failure front away from the injection well. Elevated WHP promotes failure, increases the injection rate, and cools the wellbore; however, as the overpressure drops off with distance, thermal and non-local stresses play an ongoing role in promoting shear failure at increasing distance from the well.

Nevada↗

USGS1999

Age and thermal history of the Geysers plutonic complex (felsite unit), Geysers geothermal field, California: A 40Ar/39Ar and U-Pb study

Sixty-nine ion microprobe spot analyses of zircons from four granite samples from the plutonic complex that underlies the Geysers geothermal field yield 207Pb/206Pb vs. 238U/206Pb concordia ages ranging from 1.13 ?? 0.04 Ma to 1.25 ?? 0.04 (1??) Ma. The weighted mean of the U/Pb model ages is 1.18 ?? 0.03 Ma. The U-Pb ages coincide closely with 40Ar/39Ar age spectrum plateau and 'terminal' ages from coexisting K-feldspars and with the eruption ages of overlying volcanic rocks. The data indicate that the granite crystallized at 1.18 Ma and had cooled below 350??C by ~0.9-1.0 Ma. Interpretation of the feldspar 40Ar/39Ar age data using multi-diffusion domain theory indicates that post-emplacement rapid cooling was succeeded either by slower cooling from 350??to 300??C between 1.0 and 0.4 Ma or transitory reheating to 300-350??C at about 0.4-0.6 Ma. Subsequent rapid cooling to below 260??C between 0.4 and 0.2 Ma is in agreement with previous proposals that vapor-dominated conditions were initiated within the hydrothermal system at this time. Heat flow calculations constrained with K-feldspar thermal histories and the present elevated regional heat flow anomaly demonstrate that appreciable heat input from sources external to the known Geysers plutonic complex is required to maintain the geothermal system. This requirement is satisfied by either a large, underlying, convecting magma chamber (now solidified) emplaced at 1.2 Ma or episodic intrusion of smaller bodies from 1.2 to 0.6 Ma.

Earth and Planetary Science Letters↗

USGS2000

The boron isotope systematics of Icelandic geothermal waters: 1. Meteoric water charged systems

We have measured the boron isotope composition and boron and chloride concentrations of 27 Icelandic geothermal fluids from both high- and low-temperature systems. The δ 11 B values range from −6.7‰ in the Krafla system, to +25.0‰ in a warm spring from the Southern Lowlands. In addition, we have also determined the δ 11 B values of basaltic glass from Nesjavellir (−5.3 ± 1.4‰) and travertine from Snaefellsnes (−22 ± 0.5‰). The B isotope and Cl/B systematics of the high-temperature systems are dominated by the composition of the local basalts. The lower temperature systems show evidence for mixing with B and Cl of a marine origin, together with some uptake of B into secondary mineral phases. The data from the Snaefellsnes geothermal system indicate that the fluids have undergone interaction with basalts that have undergone significant low-temperature alteration by seawater.

Geochimica et Cosmochimica Acta↗

USGS2019

Kinetic study on clogging of a geothermal pumping well triggered by mixing-induced biogeochemical reactions

The sustainability of ground-source geothermal systems can be severely impacted by microbially mediated clogging processes. Biofouling of water wells by hydrous ferric oxide is a widespread problem. Although the mechanisms and critical environmental factors associated with clogging development are widely recognized, effects of mixing processes within the wells and time scales for clogging processes are not well characterized. Here we report insights from a joint hydrological, geochemical, and metagenomics characterization of a geothermal doublet in which hydrous ferric oxide and hydrous manganese oxide deposits had formed as a consequence of mixing shallow groundwater containing dissolved oxygen and nitrate with deeper, anoxic groundwater containing dissolved iron (Fe II ) and manganese (Mn II ). Metagenomics identify distinct bacteria consortia in the pumping well oxic and anoxic zones, including autotrophic iron-oxidizing bacteria. Batch mixing experiments and geochemical kinetics modeling of the associated reactions indicate that Fe II and Mn II oxidation are slow compared to the residence time of water in the pumping well; however, adsorption of Fe II and Mn II by accumulated hydrous ferric oxide and hydrous manganese oxide in the well bore and pump riser provides “infinite” time for surface-catalyzed oxidation and a convenient source of energy for iron-oxidizing bacteria, which colonize the surfaces and also catalyze oxidation. Thus, rapid clogging is caused by mixing-induced redox reactions and is exacerbated by microbial activity on accumulated hydrous oxide surfaces.

Orleans↗

USGS2007

Thioarsenates in geothermal waters of Yellowstone National Park: Determination, preservation, and geochemical importance

Mono-, di-, tri-, and tetrathioarsenate, as well as methylated arsenic oxy- and thioanions, were determined besides arsenite and arsenate in geothermal waters of Yellowstone National Park using anion-exchange chromatography inductively coupled plasma mass spectrometry. Retention time match with synthetic standards, measured S:As ratios, and molecular electrospray mass spectra support the identification. Acidification was unsuitable for arsenic species preservation in sulfidic waters, with HCl addition causing loss of total dissolved arsenic, presumably by precipitation of arsenic-sulfides. Flash-freezing is preferred for the preservation of arsenic species for several weeks. After thawing, samples must be analyzed immediately. Thioarsenates occurred over a pH range of 2.1 to 9.3 in the geothermal waters. They clearly predominated under alkaline conditions (up to 83% of total arsenic), but monothioarsenate also was detected in acidic waters (up to 34%). Kinetic studies along a drainage channel showed the importance of thioarsenates for the fate of arsenic discharged from the sulfidic hot spring. The observed arsenic speciation changes suggest three separate reactions: the transformation of trithioarsenate to arsenite (major initial reaction), the stepwise ligand exchange from tri- via di- and monothioarsenate to arsenate (minor reaction), and the oxidation of arsenite to arsenate, which only becomes quantitatively important after thioarsenates have disappeared.

Wyoming↗

USGS2012

Shear-wave splitting from local earthquakes at the Geysers Geothermal Field, California

Shear-wave splitting from local microearth-quakes recorded in The Geysers geothermal field shows that seismic anisotropy is distributed in a complex geographic pattern. At stations within about 2 km of northwest-striking regional faults, the fast polarization direction is parallel to those faults. The geothermal field, lying between two such faults, has both northwest and northeast fast polarization directions, often at the same station. This pattern suggests at least two causes of splitting: (1) extensive dilatancy anisotropy (EDA) and (2) fault-produced fractures or rock fabric. The observed anisotropy may derive from the upper 1.5 km of the crust, averaging 4% there, or it may be heterogeneously distributed throughout the upper 5 km. Fast polarization directions coincide with fracture directions inferred from borehole data for one of the youngest rock types in the region, a felsite pluton of about 1 Ma, and with injectate pathways inferred from microseismicity and geochemistry. Including in reservoir models a permeability anisotropy with a pattern similar to seismic anisotropy may help in optimizing fluid injection and steam recovery.

California↗