SEARCH · USGS Science

Results for “Basins and Coasts”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13Linked to original sources

USGS2007

Geologic Assessment of Undiscovered Oil and Gas Resources of the Black Warrior Basin Province, Alabama and Mississippi

Introduction The purpose of the U.S. Geological Survey's (USGS) National Oil and Gas Assessment is to develop geologically based hypotheses regarding the potential for additions to oil and gas reserves in priority areas of the United States. The USGS recently completed an assessment of undiscovered oil and gas potential of the Cambrian-Ordovician carbonate rocks, the Chattanooga and Floyd Shales, and the Pottsville Formation coals in the Black Warrior Basin Province in northeastern Mississippi and northwestern Alabama in the Gulf Coast Region. The Cambrian-Ordovician carbonate rocks, the Chattanooga and Floyd Shales, and the Pottsville Formation coals are important because of their potential for natural gas resources. This assessment is based on geologic principles and uses the total petroleum system concept. The geologic elements of a total petroleum system include hydrocarbon source rocks (source rock maturation, hydrocarbon generation and migration), reservoir rocks (sequence stratigraphy and petrophysical properties), and hydrocarbon traps (trap formation and timing). The USGS used this geologic framework to define two total petroleum systems and three assessment units. All three assessment units were quantitatively assessed for undiscovered oil and gas resources.

Data Series↗

USGS1998

Concentrations and loads of nitrogen and phosphorus in the Yazoo River, northwestern Mississippi, 1996-97

Increased nutrient loading to the Gulf of Mexico from off-continent flux has been identified as contributing to the increase in the areal extent of the low dissolved-oxygen zone that develops annually off the coast of Louisiana and Texas. The proximity of the Yazoo River Basin in northwestern Mississippi to the Gulf of Mexico, and the intensive agriculture in the basin have lead to speculation that the Yazoo River Basin contributes a disproportionate amount of nitrogen and phosphorus to the Mississippi River and ultimately the Gulf of Mexico. Water samples from the Yazoo River were collected during 1996 and 1997 and were analyzed for total nitrogen, nitrate as nitrogen, total phosphorus, and orthophosphorus as part of the U.S. Geological Survey?s National Water-Quality Assessment Program. These data were used to compute annual loads of nitrogen and phosphorus discharged from the Yazoo River for 1996 and 1997. Annual loads of nitrogen and phosphorus were calculated by two methods. The first used multivariate regression and the second multiplied the mean annual concentration by the total annual flow. Load estimates based on the product of the mean annual concentration and the total annual flow were within the 95 percent confidence interval for the load calculated by multivariate regression in all cases. The Yazoo River loads, compared to long-term annual loads in the Mississippi River, indicated that the Yazoo River was contributing 2.3 percent or less of the total nitrogen load, 5.7 percent or less of the total phosphorus load, and 1 percent or less of the nitrate load in 1996 and 1997. The total nitrogen load from the Yazoo River Basin into the Mississippi River and ultimately the Gulf of Mexico was proportional to its discharge, the nitrate load was less than expected, whereas the total phosphorus load was slightly higher than expected based on discharge.

Mississippi↗

USGS2017

Ice-front change and iceberg behaviour along Oates and George V Coasts, Antarctica, 1912-96

Ice-front change may well be a sensitive indicator of regional climate change. We have studied the western Oates Coast from Cape Kinsey (158°50' E, 69°19' S) to Cape Hudson (153°45' Ε, 68°20' S) and the entire George V Coast, from Cape Hudson to Point Alden (142°02' E, 66°48' S). The glaciers here drain part of the Dome Charlie and Talos Dome areas (640 000 km 2 ). A comparison between various documents, dated several years apart, has allowed an estimate of the surficial ice discharge, the ice-front fluctuation and the iceberg-calving flux during the last 50 years. The ice-front discharge of the studied coast has been estimated at about 90 ± 12 km 3 a −1 in 1989-91, 8.5 km 3 a −1 for western Oates Coast and 82 km 3 a −1 for George V Coast. From 1962-63 to 1973-74 the floating glaciers underwent a net reduction that continued from 1973-74 to 1989-91. On the other hand, from 1989-91 to 1996 the area of floating glaciers increased. Ninnis Glacier Tongue and the western part of Cook Ice Shelf underwent a significant retreat after 1980 and 1947, respectively. Satellite-image analysis of large icebergs has provided information about ice-ocean interaction and the existence of an “iceberg trap” along George V Coast. A first estimate of the mass balance of the drainage basin of Mertz and Ninnis Glaciers shows a value close to zero or slightly negative.

Annals of Glaciology↗

USGS2019

Right-lateral fault motion along the slope-basin transition, Gulf of Santa Catalina, southern California

An active fault system carrying a significant component of right-lateral strike-slip motion extends for ~60 km along the slope–basin transition, ~10 to 20 km offshore of the southern California coast from La Jolla to Dana Point. From south to north, this fault system includes the Carlsbad, San Onofre, and San Mateo fault zones. High-resolution single channel minisparker and chirp seismic reflection data gathered from 2006 to 2011 reveal complex and variable fault zones that are generally characterized by nearly vertical to steeply east-dipping faults with a reverse slip component. The Carlsbad fault zone shows evidence of reverse motion followed by normal separation and probably also includes a component of strike-slip offset. The San Onofre fault zone shows clear evidence of right-lateral slip, offsetting submarine gullies near the base of the slope by approximately 60 m. North of these offset gullies, the base of the slope bends about 30° to the west, following the trend of the San Mateo fault zone, but strands of the San Onofre fault zone trend obliquely up slope, appearing to merge with the Newport–Inglewood fault zone at the shelf edge. These San Onofre fault strands consist of several en echelon left-stepping segments separated by “pop-up” structures, which imply a significant component of right-lateral offset that may serve to transfer right-lateral slip from faults along the base of the slope to the Newport–Inglewood fault zone. Using approximate base Quaternary and base Holocene reflections, segments of the Carlsbad and San Onofre fault zones appear to have experienced right-lateral motion in the Holocene, whereas deformation along the San Mateo fault zone appears to represent a period of mostly pre-Quaternary transpression.

California↗

USGS2011

Preliminary isostatic residual gravity anomaly map of Paso Robles 30 x 60 minute quadrangle, California

This isostatic residual gravity map is part of an effort to map the three-dimensional distribution of rocks in the central California Coast Ranges and will serve as a basis for modeling the shape of basins and for determining the location and geometry of faults within the Paso Robles quadrangle. Local spatial variations in the Earth\'s gravity field, after accounting for variations caused by elevation, terrain, and deep crustal structure reflect the distribution of densities in the mid- to upper crust. Densities often can be related to rock type, and abrupt spatial changes in density commonly mark lithological or structural boundaries. High-density rocks exposed within the central Coast Ranges include Mesozoic granitic rocks (exposed northwest of Paso Robles), Jurassic to Cretaceous marine strata of the Great Valley Sequence (exposed primarily northeast of the San Andreas fault), and Mesozoic sedimentary and volcanic rocks of the Franciscan Complex [exposed in the Santa Lucia Range and northeast of the San Andreas fault (SAF) near Parkfield, California]. Alluvial sediments and Tertiary sedimentary rocks are characterized by low densities; however, with increasing depth of burial and age, the densities of these rocks may become indistinguishable from those of older basement rocks.

Open-File Report↗

USGS1979

Magnitude and frequency of floods in western Oregon

A method for estimating the magnitude and frequency of floods is presented for unregulated streams in western Oregon. Equations relating flood magnitude to basin characteristics were developed for exceedance probabilities of 0.5 to 0.01 (2- to 100-year recurrence intervals). Separate equations are presented for four regions: Coast, Willamette, Rogue-Umpqua, and High Cascades. Also presented are values of flood discharges for selected exceedance probabilities and of basin characteristics for all gaging stations used in the analysis. Included are data for 230 stations in Oregon, 6 stations in southwestern Washington, and 3 stations in northwestern California. Drainage areas used in the analysis range from 0.21 to 7,280 square miles. Also included are maximum discharges for all western Oregon stations used in the analysis. (Woodard-USGS)

Open-File Report↗

USGS1998

Ground Water in the Southern Lihue Basin, Kauai, Hawaii

A multi-phased study of ground-water resources, including well drilling, aquifer tests, analysis of ground-water discharge, and numerical ground-water modeling, indicates that the rocks of the southern Lihue Basin, Kauai, have permeabilities that are much lower than in most other areas of ground-water development in the Hawaiian islands. The regional hydraulic conductivity of the Koloa Volcanics, which dominates fresh ground-water flow in the basin, is about 0.275 foot per day. The Waimea Canyon Basalt which surrounds the basin and underlies the Koloa Volcanics within the basin is intruded by dikes that reduce the bulk hydraulic conductivity of the rocks to about 1.11 feet per day. The low permeabilities result in steeper head gradients compared with other areas in the Hawaiian islands, and a higher proportion of ground-water discharging to streams than to the ocean. Water levels rise from near sea level at the coast to several hundreds of feet above sea level at the center of the basin a few miles inland. The high inland water levels are part of a completely saturated ground-water system. Because of the low regional hydraulic conductivity and high influx of water from recharge in the southern Lihue Basin, the rocks become saturated nearly to the surface and a variably saturated/unsaturated (perched) condition is not likely to exist. Streams incising the upper part of the aquifer drain ground water and keep the water levels just below the surface in most places. Streams thus play an important role in shaping the water table in the southern Lihue Basin. At least 62 percent of the ground water discharging from the aquifer in the southern Lihue Basin seeps to streams; the remainder seeps directly to the ocean or is withdrawn by wells.

Water-Resources Investigations Report↗

USGS1989

Mechanisms of Cenozoic tectonic rotation, Pacific Northwest Convergent Margin, U.S.A.

Large clockwise rotations (15–80°) are characteristic of Cenozoic volcanic and sedimentary rocks along the convergent margin of the northwestern United States. Abundant paleomagnetic data from 62–12 m.y. old rocks in forearc, arc, and backarc regions show that rotation increases with age and with proximity to the coast. Paleomagnetic and structural studies both support dextral shear as a significant contributor to tectonic rotation in the Pacific Northwest, with an added contribution from Basin-Range extension. Paleomagnetism of individual Miocene (15-12 Ma) flows of the Columbia River Basalt Group show a well-defined, progressive increase in rotation across the forearc region toward the trench which is most readily explained by shear. This progressive increase in rotation toward the coast is also seen in Oligocene and Eocene rocks, although with steeper gradients, indicating that shear rotation has been important throughout Cenozoic time. The dextral shear may be accommodated by abundant, small-scale strike-slip faults which are acting as Riedel shears. Coast Range faults, usually with well-developed subhorizontal slickensides, occur throughout the stratigraphie section and are most abundant in the oldest rocks. Displacements are small to moderate (10 2 –10 3 m), and both dextral and sinistral faults are common. Fault trends are variable, with N20°–45°W faults showing dextral slip and N60°W-S70°W faults showing sinistral slip. The driving force for dextral shear presumably results from coupling of the overlying plate with the subducting Farallon plate, which has been moving northeast throughout most of Cenozoic time. The increase in rotation from north to south along the coast probably represents the contribution of extension in the Basin- Range region to the rotations in Oregon.

Book chapter↗

USGS2023

Hidden system identification: Basin modeling as a tool for examining sedimentary geothermal resource potential

Three-dimensional (3D) geologic and temperature models have been developed for the onshore U.S. Gulf Coast. The results from these models identify areas of moderate- to high-temperature (90°-150°C and >150°C; respectively) geothermal resources at depths <6 km. This modeling study addresses the fundamental challenge of predicting where opportune temperature and lithology coincide. Unlike traditional geothermal systems with surface expressions of hydrothermal circulation (e.g., hot springs, fumaroles, sinter), sedimentary geothermal systems (SGS) are generally hidden. Historically, simplified efforts to predict subsurface temperatures in sedimentary basins have focused on linear temperature extrapolation that does not consider the variable thermal properties of different lithologies or lithologic changes with depth (e.g., compaction, lithification). Therefore, the need to understand basin architecture and predict temperatures in 3D within SGS is paramount to identifying geothermal resources and determining economic feasibility. Basin modeling software has long been used to characterize the subsurface conditions of sedimentary basins, including temperature, in the pursuit of finding hydrocarbons. This tool can also be adapted to evaluate the potential of geothermal resources in a sedimentary basin by predicting the confluence of desirable temperatures and reservoir lithologies. In this work, PetroMod basin modeling software was used to create a regional geologic model of the onshore U.S. Gulf Coast, covering over 500,000 km 2 calibrated to temperature data from wells. Inputs include structural surfaces from commercial databases, lithology information derived from published literature, and corrected bottom-hole temperatures (BHT) from over 6,000 wells. The resulting 3D geologic model can be used to predict temperatures throughout the basin. Maps were exported showing the depth, depositional unit, and reservoir lithology at which temperatures of 90°C and 150°C were reached, revealing over 400,000 km 2 of moderate- to high-temperature resources at depths <6 km. These maps function as a first-order screening tool to identify areas where low-, moderate-, or high-grade resource potential may exist, based on temperature and if optimal reservoir lithologies or depositional units of interest are present. Depending on the success criteria of a project, the same maps can be exported for any isotherm or incorporate other 1407 Gardner and Birdwell subsurface properties. The methodology employed in this work can be applied in any sedimentary basin with available subsurface data. Further calibration incorporating other data, including pressure and porosity, can expand the utility of basin modeling for geothermal evaluations. Basin modeling is a powerful but underutilized tool for identifying prospective geothermal resources in sedimentary basins.

Conference Paper↗

USGS2013

Construction of 3-D geologic framework and textural models for Cuyama Valley groundwater basin, California

Groundwater is the sole source of water supply in Cuyama Valley, a rural agricultural area in Santa Barbara County, California, in the southeasternmost part of the Coast Ranges of California. Continued groundwater withdrawals and associated water-resource management concerns have prompted an evaluation of the hydrogeology and water availability for the Cuyama Valley groundwater basin by the U.S. Geological Survey, in cooperation with the Water Agency Division of the Santa Barbara County Department of Public Works. As a part of the overall groundwater evaluation, this report documents the construction of a digital three-dimensional geologic framework model of the groundwater basin suitable for use within a numerical hydrologic-flow model. The report also includes an analysis of the spatial variability of lithology and grain size, which forms the geologic basis for estimating aquifer hydraulic properties. The geologic framework was constructed as a digital representation of the interpreted geometry and thickness of the principal stratigraphic units within the Cuyama Valley groundwater basin, which include younger alluvium, older alluvium, and the Morales Formation, and underlying consolidated bedrock. The framework model was constructed by creating gridded surfaces representing the altitude of the top of each stratigraphic unit from various input data, including lithologic and electric logs from oil and gas wells and water wells, cross sections, and geologic maps. Sediment grain-size data were analyzed in both two and three dimensions to help define textural variations in the Cuyama Valley groundwater basin and identify areas with similar geologic materials that potentially have fairly uniform hydraulic properties. Sediment grain size was used to construct three-dimensional textural models that employed simple interpolation between drill holes and two-dimensional textural models for each stratigraphic unit that incorporated spatial structure of the textural data.

California↗

USGS2015

California State Waters Map Series — Offshore of Bolinas, California

Introduction In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology. The Offshore of Bolinas map area is located in northern California, on the Pacific Coast of Marin County about 10 kilometers north of the Golden Gate. The town of Bolinas, named after a local indigenous tribe, is the largest population center along this section of coast, with a population of approximately 1,600 people. Bolinas is situated at the end of a southeast-trending terrain on the west side of the San Andreas Fault that also protects a natural harbor. The harbor lies in Bolinas Lagoon, which is separated from Bolinas Bay by a spit. The coastal lands within the Offshore of Bolinas map area lie entirely within the Point Reyes National Seashore, which limits development and allows existing ranching and farming to continue. The Offshore of Bolinas map area lies offshore of the northwest-trending Coast Ranges, which lie east of, and are roughly parallel to, the San Andreas Fault Zone. The western margin of North America is the only continental margin in the world delineated largely by transform faults such as the San Andreas Fault. The coastal geomorphology is controlled by late Pleistocene to Holocene slip along the fault. Bolinas Bay and Lagoon have formed where a regional depression along the fault zone intersects the coast. A northward bend in the San Andreas Fault to the north, combined with right-lateral movement, has caused regional extension and the formation of a sediment basin on the continental shelf in, and southeast of, Bolinas Bay. With the exception of the area adjacent to Bolinas Bay, the coast in the map area consists of high coastal bluffs and vertical sea cliffs. The uplifted headland upon which the town of Bolinas is situated is part of a larger uplifted area that includes exposed bedrock offshore. Uplift in this map area has resulted in relatively shallow depths within California’s State Waters (0 to 40 m) and, thus, little accommodation space for sediment accumulation. Sediment is found in the extensional basin southeast of Bolinas, as well as on the shelf offshore of uplifted coastal areas, where, within California’s State Waters, depths can exceed 40 m. Wave energy keeps the uplifted bedrock areas clear of sediment, and rippled sediment in the outer shelf indicates some mobility. Coastal sediment transport in the Offshore of Bolinas map area is characterized by north-to-south littoral transport of sediment that is derived mainly from ephemeral streams and local coastal erosion. Beyond California’s State Waters, canyons that incise the slope have been disconnected from coastal streams by rising sea level, which has risen about 125 m since the lowstand associated with the Last Glacial Maximum about 18,000 to 20,000 years ago. In the map area, no major submarine canyons extend up past the shelf break and into the nearshore to receive littoral drift. The coastline in the map area is characterized as high risk because of its steep cliffs and large-scale landsliding. The sand spit that separates Bolinas Lagoon from Bolinas Bay is highly developed, and its homes are at risk during storms, especially those from the south. The benthic species observed in the Offshore of Bolinas map area are natives of the cold-temperate biogeographic zone named either the “Oregonian province” or the “northern California ecoregion.” This biogeographic province is maintained by the long-term stability of the southward-flowing California Current, an eastern limb of the North Pacific subtropical gyre that flows from Oregon to Baja California. At its midpoint off central California, the California Current transports subarctic surface (0–500 m deep) waters southward, about 150 to 1,300 km from shore. Seasonal northwesterly winds that are, in part, responsible for the California Current, generate coastal upwelling. The south end of the Oregonian province is at Point Conception (about 425 km south of the map area), although its associated phylogeographic group of marine fauna may extend beyond to the area offshore of Los Angeles in southern California. The ocean off central California has seen a warming over the last 50 years that is driving an ecosystem shift from the productive subarctic regime towards a depopulated subtropical environment. Seafloor habitats in the Offshore of Bolinas map area, which lies within the Shelf (continental shelf) megahabitat, range from, in the nearshore, sandy seafloor in the southeast and significant rocky outcrops that support kelp-forest communities in the northwest to, in deeper water, rocky-reef communities. Biological productivity resulting from coastal upwelling supports populations of Sooty Shearwater Western Gull, Common Murre, Cassin’s Auklet, and many other less populous bird species. In addition, an observable recovery of Humpback and Blue Whales has occurred in the area; both species are dependent on coastal upwelling to provide nutrients. The large extent of exposed inner shelf bedrock in the northeast supports large forests of “bull kelp,” which is well adapted for high wave-energy environments. Common fish species found in the kelp beds and rocky reefs include lingcod and various species of greenling and rockfish.

California↗

USGS1982

Ground-water monitoring at Santa Barbara, California; Phase 2-effects of pumping on water levels and water quality in the Santa Barbara ground-water basins

From July 1978 to January 1980, water levels declined more than 100 feet in the southern part of the Santa Barbara ground-water basin. The water-level declines are the result of increases in municipal pumping since July 1978. The increase in municipal pumping was part of a basin-testing program to determine the usable quantity of ground water in storage. The pumping, centered in the city less than 1 mile from the coast, has caused water-level declines in the main water-bearing zones to altitudes below sea level. Consequently, the ground-water basin is threatened with saltwater intrusion if the present pumpage is maintained or increased. Data indicate that saltwater intrusion has degraded the quality of water yielded from six coastal wells. Chloride concentrations in the most recent samples from coastal wells ranged from about 250 to 3,800 milligrams per liter. Four of the wells yielded water with chloride concentrations in excess of 1,000 milligrams per liter. Previous investigators believed that saltwater intrusion was limited to the shallow part of the aquifer directly adjacent to the coast. The possibility of saltwater intrusion into the deeper water-bearing deposits in the aquifer was thought to be remote because an offshore fault truncates these deeper deposits against consolidated rocks on the seaward side of the fault. Results of this study indicate, however, that ocean water has intruded into the deeper water-bearing deposits to a much greater extent than in the shallow part of the aquifer. Apparently the offshore fault is not an effective barrier to saltwater intrusion.

California↗

USGS2015

Southern Salish Sea Habitat Map Series: Admiralty Inlet

In 2010 the Environmental Protection Agency, Region 10 initiated the Puget Sound Scientific Studies and Technical Investigations Assistance Program, designed to support research in support of implementing the Puget Sound Action Agenda. The Action Agenda was created in response to Puget Sound having been designated as one of 28 estuaries of national significance under section 320 of the U.S. Clean Water Act, and its overall goal is to restore the Puget Sound Estuary's environment by 2020. The Southern Salish Sea Mapping Project was funded by the Assistance Program request for proposals process, which also supports a large number of coastal-zone- and ocean-management issues. The issues include the recommendations of the Marine Protected Areas Work Group to the Washington State Legislature (Van Cleve and others, 2009), which endorses a Puget Sound and coast-wide marine conservation needs assessment, gap analysis of existing Marine Protected Areas (MPA) and recommendations for action. This publication is the first of four U.S. Geological Survey Scientific Investigation Maps that make up the Southern Salish Sea Mapping Project. The remaining three map blocks to be published in the future, located south of Admiralty Inlet, are shown in figure 1. Puget Sound is a deep, fjord-type estuary covering an area of 2,330 km 2 in the Pacific Northwest region of the United States (fig. 1). It is connected to the ocean by the Strait of Juan de Fuca, a turbulent passage approximately 160 km in length and 22 km wide at its west end, expanding to over 40 km wide at its east end (Thomson, 1994). During the Pleistocene, the area was occupied several times by lobes of continental ice, resulting in a complex basin-fill of glacial and interglacial deposits that are locally as thick as 1100 m (Johnson and others, 2001). The last glaciation, called the Fraser glaciation, began after 28,800±740 14 C yr B.P. when ice started a slow expansion (Clague, 1981). At peak advance the westward Juan de Fuca lobe reached the edge of the continental shelf through the Juan de Fuca Strait shortly before 14,460±200 14 C yr B.P. (Herzer and Bornhold, 1982). The southward Puget lobe advanced to its terminal position in Puget Sound by around 14,150 14 C yr B.P. (Porter and Swanson, 1998). Ice retreated from its maximum to northern Whidbey Island by 13,650±350 14 C yr B.P. (Dethier and others, 1995). Retreating glaciers resulted in a thick sequence of ice-contact, glacial-marine sediment, and early post-glacial sediments (Linden and Schurrer, 1988). These deposits have experienced the effects of a marine transgression followed by regression, resulting in a sea-level several tens of meters lower than the present day (Linden and Schurrer, 1988). A second transgression brought sea level to about the present level by around 5,470±120 14 C yr B.P. (Clague and others, 1982) establishing the present oceanographic and geologic environment Puget Sound is separated into four interconnected basins; Whidbey, Central (Main), Hood Canal, and South (Thomson, 1994). The Whidbey, Central, and Hood Canal basins are the three main branches of the Puget Sound estuary and are separated from the Strait of Juan de Fuca by a double sill at Admiralty Inlet. The Admiralty Inlet map area includes the Inlet and a portion of the Whidbey Basin (fig. 1). The shallower South Basin is separated by a sill at Tacoma Narrows and is highly branched with numerous finger inlets. Flow within Puget Sound is dominated by tidal currents of as much as 1 m/s at Admiralty Inlet, reducing to approximately 0.5 m/s in the Central Basin (Lavelle and others, 1988). The lack of silt and clay-sized sediments in the Admiralty Inlet map area is likely a result of the strong currents (see Ground-Truth Studies for the Admiralty Inlet Map Area, sheet 3). The subtidal component of flow reaches approximately 0.1 m/s and is driven by density gradients arising from the contrast in salty ocean water at the entrance and freshwater inputs from stream flow (Lavelle and others, 1988). The total freshwater input to Puget Sound is approximately 3.4 x 10 6 m 3 /day, primarily from the Skagit River (Cannon, 1983). The subtidal circulation mostly consists of a two-layered flow in the basins with fresher water exiting at the surface and saltier water entering at depth (Ebbesmeyer and Cannon, 2001). In general, surface waters flow north and deeper waters flow south; variations arise from wind effects that can drive a surface current in the same direction as the wind, and a baroclinic response in the lower layer to about 100-m depth (Matsuura and Cannon, 1997). Oceanographic properties are influenced by temporal forcing parameters such as reduced stream flow during the 2000-01 drought that increased surface salinity and decreased differences between surface and bottom waters (Newton and others, 2003). On offshore seismic-reflection profiles, Pleistocene strata (excluding latest Pleistocene glacial and post-glacial deposits) form a distinct seismic unit, bounded below by pre-Tertiary or Tertiary basement and above by typically flat-lying latest Pleistocene to Holocene deposits that fill in erosional or depositional relief (Johnson and others, 2001). Cores from central Puget Sound have accumulation rates that range from 85 to 1200 mg/cm 2 /yr, or 0.12 to 2.4 cm/yr; the highest accumulation rates are near the southern end of central Puget Sound (Carpenter and others, 1985). Carpenter and others (1985) un-weighted arithmetic mean of accumulation rates for central Puget Sound deeper stations is 480±340 (± one standard deviation) mg/cm 2 /yr. Lavelle and others (1985) also found rates as high as 1200 mg/cm 2 /yr over the past approximately 70 years in cores in the Central Basin off of and north and south of Elliott Bay. Puget Sound basin rates are comparable to rates in midshelf silt deposits on the Washington coast north of the Columbia River (Nittrouer and others, 1979). The deep subtidal (in other words, below SCUBA depths) habitats of Puget Sound are relatively poorly known. A few subtidal surveys exist for several habitat types from the 1960s and 1970s (reviewed in Dethier, 1990), using grab and box core data. The Dethier (1990) review divides habitat up into Coast and Marine Ecological Classification Standard (CMECS) substrate, water column energy, and depth zones but does not attempt to map these habitats, rather it is an inventory of habitats found in the area and the flora and fauna associated with each habitat. The approach of the Southern Salish Sea Mapping project is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data (the undersea equivalent of satellite remote-sensing data in terrestrial mapping), acoustic backscatter, seafloor video, seafloor photography, and bottom-sediment sampling data. This approach is based in part on methods presented and data collection and product needs identified at the Washington State Seafloor Mapping Workshop (Washington State Seafloor Mapping Workshop Steering Committee, 2008), attended by coastal and marine managers and scientists. The map products display seafloor geomorphology and substrate, and identify potential marine benthic habitats. It is emphasized that the more interpretive habitat and geology maps rely on the integration of multiple, new high-resolution datasets and that mapping at small scales would not be possible without such data. Oceanographic current and wave data is not included in this analysis, however, the accompanying geographic information system (GIS) data set is designed and intended to be combined with oceanographic and biologic data sets assembled by others in the future and some of the GIS data has already been incorporated in the unpublished Nature Conservancy Benthic Habitats of Puget Sound database. This publication includes four map sheets, explanatory text, and a descriptive pamphlet. Each map sheet is published as a portable document format (PDF) file. ESRI ArcGIS compatible geotiffs (for example, bathymetry) and shapefiles (for example video observation points) will be available for download in the data catalog associated with this publication (Cochrane, 2015). An ArcGIS Project File with the symbology used to generate the map sheets is also provided. For those who do not own the full suite of ESRI GIS and mapping software, the data can be read using ESRI ArcReader, a free viewer that is available at http://www.esri.com/software/arcgis/arcreader/index.html .

Washington↗

USGS1984

Neogene molluscan stages of the West Coast of North America

Neogene marine sediments of the West Coast of North America were deposited in a series of widely spaced basins that extended geographically from the western and northern Gulf of Alaska (60°N) to southern California (33°N). Rich molluscan faunas occur extensively throughout these deposits and form the basis for biostratigraphic schemes that are useful for correlating within and between individual basins. Early biostratigraphic work was concerned with faunas from particular horizons and with the stratigraphic range of diverse taxa, such as Pecten and Turritella , without reference to other fossil groups. Succeeding work increasingly dealt with the relationships of molluscan zones to benthic and, later, planktonic foraminiferal stages. In recent years the age limits of Neogene molluscan stages have become better documented by reference to planktonic microfossils from dated DSDP cores and onshore faunas. Neogene molluscan faunas from California, the Pacific Northwest states (Oregon and Washington), and southern Alaska have been treated separately due to differences in faunal composition and geographic isolation. As a result, a different biostratigraphic sequence has been described for each region. Pacific Northwest stages have been formally named and defined, and their names are also used informally for Alaskan faunas. California Neogene stages were proposed early in this century, are in need of redescription, and their usage is informal. Precise correlations between the three regional sequences have not yet been achieved, due to the low number of co-occurring species and the general lack of planktonic microfossils in these largely shallow-water faunas. The objectives of ongoing research include: fuller documentation of the faunas of California and Pacific Northwest stages; formal description of California stages; improved correlation between regional stage sequences; refinement of age estimates for stage boundaries; and, establishment of Neogene stages for Alaskan faunas.

California, Oregon, Washington↗

USGS2005

Estimated withdrawals from principal aquifers in the United States, 2000

Fresh ground-water withdrawals from 66 principal aquifers in the United States were estimated for irrigation, public-supply, and self-supplied industrial water uses for the year 2000. Total ground-water withdrawals were 76,500 million gallons per day, or 85,800 thousand acre-feet per year for these three uses. Irrigation used the largest amount of ground water, 56,900 million gallons per day, followed by public supply with 16,000 million gallons per day, and self-supplied industrial with 3,570 million gallons per day. These three water uses represented 92 percent of the fresh groundwater withdrawals for all uses in the United States, the remaining 8 percent included self-supplied domestic, aquaculture, livestock, mining, and thermoelectric power uses. Aquifer withdrawals were categorized by five lithologic groups: unconsolidated and semiconsolidated sand and gravel aquifers, carbonate-rock aquifers, igneous and metamorphic-rock aquifers, sandstone aquifers, and sandstone and carbonate-rock aquifers. Withdrawals from aquifers that were not included in one of the 66 principal aquifers were reported in an “Other” aquifers group. The largest withdrawals in the United States were from unconsolidated and semiconsolidated sand and gravel aquifers, which accounted for 80 percent of total withdrawals from all aquifers. Carbonate-rock aquifers provided 8 percent of the withdrawals, and igneous and metamorphic-rock aquifers, 6 percent. Withdrawals from sandstone aquifers, from sandstone and carbonate-rock aquifers, and from the “Other” aquifers category each constituted about 2 percent of the total withdrawals reported. Fifty-five percent of the total withdrawals for irrigation, public-supply, and self-supplied industrial water uses were provided by the High Plains aquifer, California Central Valley aquifer system, the Mississippi River Valley alluvial aquifer, and the Basin and Range basin-fill aquifers. These aquifers provided most of the withdrawals for irrigation. The High Plains aquifer was the most intensively used aquifer in the United States. This aquifer provided 23 percent of the total withdrawals from all aquifers for irrigation, public-supply, and self-supplied industrial water uses combined, and 30 percent of the total withdrawals from all aquifers for irrigation. The primary aquifers used for public supply were the glacial sand and gravel aquifers of the Northeastern and North-Central States, the California Coastal Basin aquifers, the Floridan aquifer system, the Basin and Range basin-fill aquifers, and the Coastal lowlands aquifer system along the Gulf Coast. These five aquifers provided 43 percent of the total withdrawals from all aquifers for public supply. The glacial sand and gravel aquifers, Coastal lowlands aquifer system, Floridan aquifer system, and Cambrian-Ordovician aquifer system were the primary sources of water for self-supplied industrial use; these aquifers provided 46 percent of the total ground-water withdrawals for that use.

Circular↗

USGS2014

Deposit model for heavy-mineral sands in coastal environments

This report provides a descriptive model of heavy-mineral sands, which are sedimentary deposits of dense minerals that accumulate with sand, silt, and clay in coastal environments, locally forming economic concentrations of the heavy minerals. This deposit type is the main source of titanium feedstock for the titanium dioxide (TiO 2 ) pigments industry, through recovery of the minerals ilmenite (Fe 2+ TiO 3 ), rutile (TiO 2 ), and leucoxene (an alteration product of ilmenite). Heavy-mineral sands are also the principal source of zircon (ZrSiO 4 ) and its zirconium oxide; zircon is often recovered as a coproduct. Other heavy minerals produced as coproducts from some deposits are sillimanite/kyanite, staurolite, monazite, and garnet. Monazite [(Ce,La,Nd,Th)PO 4 ] is a source of rare earth elements as well as thorium, which is used in thorium-based nuclear power under development in India and elsewhere. The processes that form coastal deposits of heavy-mineral sands begin inland. High-grade metamorphic and igneous rocks that contain heavy minerals weather and erode, contributing detritus composed of sand, silt, clay, and heavy minerals to fluvial systems. Streams and rivers carry the detritus to the coast, where they are deposited in a variety of coastal environments, such as deltas, the beach face (foreshore), the nearshore, barrier islands or dunes, and tidal lagoons, as well as the channels and floodplains of streams and rivers in the coastal plain. The sediments are reworked by waves, tides, longshore currents, and wind, which are effective mechanisms for sorting the mineral grains on the basis of differences in their size and density. The finest-grained, most dense heavy minerals are the most effectively sorted. The result is that heavy minerals accumulate together, forming laminated or lens-shaped, heavy-mineral-rich sedimentary packages that can be several meters and even as much as tens of meters thick. Most economic deposits of heavy-mineral sands are Paleogene, Neogene, and Quaternary in age; some are modern coastal deposits. Superimposed on these basic processes of ore formation are a multitude of contributing and modifying factors, such as the following: Strong, sustained wave action moves sand from offshore to the shore, where the sand and heavy minerals are sorted by size and density. Mineral sorting occurs mainly on the upper part of the hightide swash (wave) zone. Fine-grained sands and heavy minerals on the foreshore can be remobilized by winds, forming heavy mineral-rich sand dunes behind the beach. Longshore drift combined with the geomorphology of the coast exert strong influence on the location of the heavy-mineral sands deposits. Sea level changes are a function of climatic changes, such as ice ages. Rises in regional sea level (transgression) and lowering of sea level (regression) strongly influence the deposition and preservation of heavy-mineral sands. The majority of heavy-mineral sands accumulation appears related to seaward progradation of the shore during regression events. Local faulting may affect the geomorphology of the coast, which controls the distribution of heavy mineral deposition in a coastal basin. Heavy mineral grains appear to weather primarily after their deposition in the coastal plain; this weathering is caused by groundwaters, humic acids, and other intrabasinal fluids. This weathering can enhance the TiO 2 content of ilmenite. Iron is leached from ilmenite during weathering, which thereby upgrades the TiO 2 content of the ilmenite, forming leucoxene. The resulting deposits of heavy-mineral sands can be voluminous. Individual bodies of heavy mineral-rich sands are typically about 1 kilometer wide and more than 5 kilometers long. Many heavy-mineral sands districts extend for more than 10 kilometers and contain several individual deposits that are spread along an ancient or modern strandline. Reported thicknesses of economic deposits range from 3 to 45 meters. Individual ore deposits typically comprise at least 10 megatonnes of ore (the total size of the individual sand-silt body), whose overall heavy-mineral content is 2 to greater than 10 percent. Heavy-mineral sands deposits are relatively easy to mine because they are weakly to poorly consolidated, and they are relatively easy to process. From a geoenvironmental standpoint, mining of heavy mineral-sands generates little or no acid or solubilized metals. However, environmental and human health concerns related to such mining include potential effects on indigenous flora and fauna, effects on local hydrology, and issues related to processing and storing thorium-bearing monazite, owing to its radioactivity. Regional exploration for deposits of heavy-mineral sands can utilize the analyses of stream sediment samples for Ti, Hf, the rare earth elements, Th, and U, and geophysical surveys, particularly radiometric (gamma-ray spectrometry for K, U, and Th) and magnetic methods. Geophysical anomalies may be small, and surveys are generally more successful when conducted close to sources of interest.

Scientific Investigations Report↗

USGS2021

Development of a screening tool to examine lake and reservoir susceptibility to eutrophication in selected watersheds of the eastern and southeastern United States

This report describes a new screening tool to examine lake and reservoir susceptibility to eutrophication in selected watersheds of the eastern and southeastern United States using estimated nutrient loading and flushing rates with measures of waterbody morphometry. To that end, the report documents the compiled data and methods (R-script) used to categorize waterbodies by Carlson’s Trophic State Index. Assessments were completed for 232 lakes and reservoirs having a surface area greater than or equal to 0.1 square kilometer in watersheds that drain to the Atlantic and eastern Gulf of Mexico coasts of the United States and in watersheds within the Tennessee River Basin. Waterbodies were categorized by type—natural lakes, headwater reservoirs, and downstream reservoirs—and were assessed independently. Recursive partitioning and the model-based boosting routine were used to create four-node regression trees to group waterbodies into five endpoints from low-to-high measures of Secchi depth, and concentrations of chlorophyll a and microcystin according to shared nutrient loading, flushing rate, and morphometric characteristics. Trophic state designations were assigned based on the average value within each of the five endpoints. An application (procedure) is provided using the tool to examine the susceptibility of a given waterbody of interest to eutrophication. Results of this study can aid water-resource managers in prioritizing lake and reservoir protection and restoration efforts based on the susceptibility of these waterbodies to eutrophication relative to nutrient loading, flushing rate, and morphometric characteristics.

Scientific Investigations Report↗

USGS1992

Geographic Variation in Hirundo pyrrhonota (Cliff Swallow) from Northern North America

The number of subspecies recognized in Hirundo pyrrhonota Vieillot (Cliff Swallow) from Alaska, Canada, and the northern contiguous United States ranges from one (Peters 1960) to three (e.g., Jewett et al. 1953, Oberholser, 1920, breeding from central Alaska to the central Great Basin, and two disjunct populations of nominate pyrrhonota , breeding on the west coast and east of the Rocky Mountains. Although various authors have reported measurements of wing chord, they have not provided quantitative data for other plumage characters, and they disagree in the characterizations and ranges of the subspecies they recognize. Because of this, I reviewed the geographic variation among the northern populations. My study is confined to specimens from Alaska, Canada, and the contigeous United States south to Merced County in California, both slopes of the Rocky Mountains from Montana and Colorado, and northern half of the eastern United States from Kansas east to Virginia (Figure 1). The A.O.U. (1957) gave the breeding range of hypopolia as extending from Alaska and Mackenzie to southeastern British Columbia, the eastern parts of Washington, Oregon, and central-eastern California, central Nevada, northern Utah, Montana, and northwestern Wyoming, and the range of nominate pyrhonota as from southwestern British Columbia, western Oregon and Washington to southern California, southern Nevada, southern and eastern Utag, and east of the Rocky Mountains. I excluded specimens of H. p. ganieri Phillips, 1986, a subspecies (Browning 1990) that breeds from at least west-central Tennessee to Texas, and H. p. tachina Oberholser, 1903 (sensu Phillips 1986), which breeds north to central California, Utah, Arizona, and new Mexico. I follow Phillips (1973) for the use of the generic name Hirundo for the Cliff Swallow, Hellmayr (1935) for the use of the specific name pyrrhonota .

Western Birds↗