USGS Science⌕ Search

SEARCH · USGS Science

Results for “ACS ES&T Water”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

808 records · Page 13Linked to original sources
USGS2025

Gas emissions from the Sulphur Bank Mercury Mine hydrothermal system, Clear Lake volcanic field, California

The Sulphur Bank Mercury Mine (SBMM) hydrothermal system offers insights into active degassing processes in the Clear Lake volcanic field (CLVF), a high-threat region based on its record of Holocene eruptions and proximity to populated areas. Here we present chemical and isotopic analyses of gas samples collected between 2015 and 2023, along with the first comprehensive CO 2 flux survey of the SBMM area conducted in 2023. Sampled gases are CO 2 - and CH 4 -rich (≥84 and 6 mol% in dry gas, respectively) with high mantle-derived helium contributions ( 3 He/ 4 He = 6.54–7.86 R C /R A ). Carbon isotopic compositions of CO 2 (δ 13 C = −10.0 to −9.5 ‰) and CH 4 (δ 13 C = −35.8 ‰) indicate mixed sources, with significant contributions from metamorphism of organic-rich Franciscan Complex rocks hosting the hydrothermal system. Modeling of gas compositions shows that scrubbing by interaction with air-saturated groundwater strongly influences observed compositional variability. From our CO₂ flux measurements, we estimate the deeply derived CO 2 emission rate from the SBMM hydrothermal area (0.2 km 2 ) at 240 t d −1 , comparable to many quiescently degassing volcanoes worldwide. We also provide a first-order estimate of CH 4 emissions at approximately 0.5 t d −1 . Our findings establish crucial baseline data for future volcanic monitoring efforts, enhancing detection capabilities for potential changes in this active hydrothermal system. This work contributes to the broader understanding of volatile contributions from volcanic and metamorphic sources to the global carbon budget, while highlighting the strong influence of bedrock geology on gas compositions in the CLVF.

California↗
USGS2026

Monazite and xenotime U-Pb geochronology and thermometry of the Blue Ridge and Inner Piedmont of North Carolina: Implications for the thermal-metamorphic evolution of the southern Appalachian metamorphic “core”

The southern Appalachian orogen preserves a complex distribution of metamorphism and deformation varying in timing, magnitude, and spatial extent. These complexities give rise to disparate interpretations for southern Appalachian tectonic evolution, which complicates the testing and interpretation of tectonic models in this system. New monazite (Mnz) and xenotime (Xtm) laser ablation split stream (LASS) analyses alongside Mnz-Xtm thermometry in the orogenic core in the eastern Blue Ridge (EBR), western Inner Piedmont (WIP), and Cat Square terranes (CST) of North Carolina yield new constraints that define distinct pro- and retrograde metamorphic events. The EBR preserves two prograde thermal events: the Taconic (∼470-440 Ma, >660°C) and Neoacadian (∼380-340 Ma, 600–700°C), separated by a period of cooling (exhumation?) and followed by garnet breakdown from 339 to 329 Ma. Evidence of pervasive Neoacadian ductile deformation in the EBR is largely limited to the Brevard fault zone (BFZ), indicating that a major rheological gradient existed across the BFZ during the Neoacadian and early Alleghanian. Southeast of the BFZ, in the WIP and CST, monazite data define a protracted Neoacadian evolution from early mineral growth at ∼405 Ma at ∼450–600°C to >700°C at ∼360 Ma, followed by early Alleghanian retrograde metamorphism and deformation (<345 Ma, 350–500°C). These constraints, together with previously reported thermobarometric data, define a P-T-t evolution for the WIP and CST consistent with Neoacadian crustal flow, while the coeval presence of a thermal-rheological boundary along the BFZ further supports a model of Neoacadian crustal “escape” flow within the orogen.

North Carolina↗
USGS2025

Rapid emplacement of the Keaiwa Lava Flow of 1823 from the Great Crack in the Southwest Rift Zone of Kilauea volcano

The Keaīwa Lava Flow of 1823 in the Southwest Rift Zone of Kīlauea volcano is unusual for its expansive pāhoehoe sheet flow morphology and lack of constructive vent topography, despite having a similar tholeiitic basalt composition to other lavas erupted from Kīlauea. This lava flow issued from a ∼10-km-long continuous fissure now known as the Great Crack, and has an unusually thin sheet flow morphology with margin thicknesses of ∼15–110 cm (average of 42 cm). Based on field observations of the lava flow at its fissure vent (e.g., drain-back features), we propose that the Great Crack formed, or at least significantly widened, just prior to and syn-eruptively with this 1823 eruption. The absence of pyroclastic cones or spatter ramparts indicates that the eruption consisted of a rapid outpouring of relatively degassed lava as the fissure unzipped. The rapidly moving lava flow overtopped pre-existing tumuli and scoria cones (e.g., Lava Plastered Cones) up to ∼10 m tall. Glass and whole-rock chemistry yield homogeneous compositions for the lavas erupted from the Great Crack, with glass compositions of 6.40 ± 0.10 wt% MgO and whole-rock compositions of 7.39 ± 0.07 wt% MgO. Lava pads erupted from a short western fissure system are richer in mafic minerals (e.g., olivine and clinopyroxene), and show slightly more MgO-rich whole-rock compositions (7.79 ± 0.05 wt%). MgO-in-glass thermometry on juvenile spatter yield eruption temperatures of 1153 ± 13°C that are typical of Kīlauea lavas. Thus, the extensive sheet-like lava flow morphology is not a direct consequence of unusual magmatic or rheological conditions (i.e., low viscosity). Instead, the flow morphology is associated with high effusion rates caused by sudden drainage of uprift magma as it erupted from the Great Crack. Lava flow modeling on a 2-m-resolution digital elevation model indicates that a minimum bulk effusion rate of ∼5800 m 3 /s (∼3500 m 3 /s dense rock equivalent) and a minimum flow velocity of ∼11 m/s are required for the lava flow to overcome the topography of the Lava Plastered Cones. This effusion rate is among the highest inferred for eruptions in Hawaiʻi and around the world. This study highlights a less frequent eruption style at Hawaiian volcanoes characterized by a sudden outpouring of lava from an unusual fissure system. Local eyewitness accounts indicate that the 1823 eruption was preceded by seismicity. Given the complex magmatic-volcanic-tectonic relations across Kīlauea, we speculate that the south flank could have slipped over one or more events that ultimately triggered unzipping of the Great Crack and passive release of briefly stored uprift magma. An eruption similar to 1823 at Kīlauea or Mauna Loa, with an eruptive timeframe that could be as short as an hour, with high effusion rates and rapid flow front velocities, would not easily allow for a timely response.

Hawaii↗
USGS2024

Upper crustal seismic velocity structure of the Hayward fault zone, San Francisco Bay, California, USA: Results from the 2016 East Bay Seismic Experiment (EBSI-16)

We developed Vp, Vs, Vp / Vs ratio, and Poisson’s ratio models of the uppermost crust (<4 km depth) from the eastern San Francisco (SF) Bay (California, USA) to near the Calaveras fault along a 15-km-long, linear profile. Upper crustal velocities are highly variable beneath, west, and well east of the Hayward fault. We observe eight notable features, from west to east: (1) Near San Francisco Bay, there is an ~2-km-wide structure with high Vp / Vs ratios (up to 5) and Poisson’s ratios (up to 0.48) extending from the surface to the base of our model, which we suggest the structure is a near-vertical fault that lies along a straight-line projection between the Silver Creek fault to the south and the Point Richmond fault to the north. The structure may be part of an ~90-km-long fault along the eastern SF Bay. (2) The western East Bay Plain, the lower lying area between the bay and the hills, includes up to 800 m of low-velocity sediments ( Vp ~1600–3000 m/s, Vs ~500 m/s to ~1000 m/s), underlain by higher velocity basement rocks ( Vp ~3000–5800 m/s; Vs ~1000–1500 m/s). (3) Between ~1 km and 3 km east of the Bay shoreline, sediments thin in a series of steps (likely faults) toward the Hayward fault. (4) Between ~3 km west and ~1 km east of the Hayward fault (at the East Chabot fault) at depths greater than 1 km, basement Vp (up to 6000 m/s) and Vs (up to 2800 m/s) are high, and Vp / Vs ratios (<2) and Poisson’s ratios (<0.3) are low, suggesting crystalline rocks. Furthermore, a near-vertical zone of low Vp / Vs ratios and Poisson’s ratios is between near-surface traces of the Hayward and East Chabot faults, likely corresponding to the San Leandro Gabbro of Ponce et al. (2003) . (5) Eastward of the East Chabot fault in the upper 1.5 km, basement Vp (~3000 m/s to ~4200 m/s) and Vs (~1200–2000 m/s) are lower than those west of the fault. (6) In the eastern Hayward/Oakland Hills, there are zones of laterally varying, high- and low-velocity ( Vp ~2500–3000 m/s) Jurassic–Cretaceous and Tertiary sediments in the shallow subsurface that likely extend much deeper than imaged. (7) Seismic energy that propagates westward from sources east of the Hayward fault (HF) appear weaker than energy that propagates eastward from sources west of the HF, suggesting that the HF acts as a partial barrier to shallow seismic energy propagation into the more populated eastern SF Bay area. (8) Unlike many fault zones, it appears that the active trace of the Hayward fault (in our study area) is not cored by a prominent, low-velocity zone relative to rocks to the east and west of the active trace. However, the active trace does mark a prominent change from relatively higher velocities to the west and lower velocities to the east.

California↗
USGS2025

Foundational uncertainties in terminal Ediacaran chronostratigraphy revealed by high-precision zircon U-Pb geochronology of the Nama Group, Namibia

The Nama Group of southern Namibia and northwestern South Africa hosts the best-dated mixed carbonate-siliciclastic foreland basin succession of the terminal Ediacaran [ca. 551 million years (Ma) ago to <538 Ma] and is key for resolving the chronology of early metazoan evolution. Numerous silicified volcanic tuff interbeds are present, but differing interpretations regarding the fidelity of their ages lead to different regional stratigraphic correlations, especially for the Urusis Formation of the Schwarzrand Subgroup. An expanded record of the Urusis Formation is found in the Swartpunt area of southern Namibia, which has yielded an important metazoan biota. But the succession in this area is preserved as a series of thrusts at the leading edge of the Gariep orogenic belt and zircon U-Pb data show systematic age repetition. We use regional stratigraphic and structural mapping, integrated with carbonate carbon isotope (δ 13 C carb ) chemostratigraphy and high-precision radioisotope U-Pb zircon geochronology from outcrop and recently acquired drill core to develop a temporally calibrated basin-wide depositional model. This integrated dataset either reflects complex zircon reworking, inheritance, or potential analytical biases (Scenario 1) or the presence of a Gariep-related cryptic décollement within the Spitskop Member that has resulted in stratigraphic repetition (Scenario 2). We investigate the evidence for and against both scenarios and consider their implications for stratigraphic and δ 13 C carb correlations between the Swartpunt area and coeval exposures along the Orange River border with South Africa. Given that these issues are in an area that hosts numerous silicified ash beds and extensive exposure, an inability to confidently discount either scenario highlights a level of compounding uncertainty in zircon U-Pb geochronology that must be considered when attempting to build global chronostratigraphic frameworks. Scenario 1 implies that some of the weighted mean ages and Bayesian eruption ages from the Swartpunt area may be >1 Myr older than the depositional age of their respective ash beds when assuming existing stratigraphic correlations. If this scenario is preferred, then a cautious approach would be to consider all weighted mean zircon U-Pb ages from ash beds to reflect maximum depositional ages. Both scenarios support deposition of the Huns Member >540 Ma in the Swartpunt area if the oldest weighted mean age reported here represents a near-depositional age, which has significant implications for the temporal calibration of important terminal Ediacaran ichnofossil assemblages and future cyclostratigraphic studies. Stratigraphic correlations common to both scenarios allow us to temporally calibrate a basin evolution model for the Nama Group. Temporal trends in initial hafnium isotope (εHf) compositions of zircon grains from ash beds throughout the succession may support progressive crustal thickening associated with underplating of the Damara orogenic belt along the northern periphery of the Kalahari craton from ca. 547 Ma to ca. 538 Ma. The compilation of new and published zircon U-Pb ages may also imply that the locus of carbonate platform development migrated from north to south (present co-ordinates), tracking the migration of foredeep subsidence.

Earth-Science Reviews↗
USGS2024

Greater sage-grouse habitat of Nevada and northeastern California—Integrating space use, habitat selection, and survival indices to guide areas for habitat management

Executive Summary Greater sage-grouse populations ( Centrocercus urophasianus ; hereafter sage-grouse) are threatened by a suite of disturbances and anthropogenic factors that have contributed to a net loss of sagebrush-dominant shrub cover in recent decades. Declines in sage-grouse populations are largely linked to habitat loss across their range. A key component of conservation and land use planning efforts for sage-grouse involves the continued monitoring and modeling of habitat requirements and suitability across its range. The Bureau of Land Management (BLM) is addressing the management of sage-grouse habitats on BLM-authorized public lands throughout the western United States through a land use planning amendment and associated environmental impact statement (86 FR 66331). More than 25 percent of the range-wide distribution of sage-grouse is within Nevada and northeastern California, and information on sage-grouse distribution and habitat requirements is important to guide appropriate management decisions. Therefore, the BLM has identified the need for updated spatially explicit information on sage-grouse habitat in Nevada and northeastern California to guide the land use planning amendment and associated management decisions. To address this need, researchers with the U.S. Geological Survey, in close cooperation with multiple State and Federal resource agency partners, including BLM, Nevada Department of Wildlife (NDOW) and California Department of Fish and Wildlife (CDFW), sought to map sage-grouse distribution and produce example habitat designations in these states. Herein, we report results of our primary study objective, which was to map sage-grouse habitat and create example habitat management areas, based on more than a decade of location and survival data collected from marked sage-grouse across the study region coupled with lek count survey data managed by the NDOW and the CDFW. We expanded on previously developed methodology to incorporate information on habitat selection and survival during reproductive life stages and specific seasons with updated sage-grouse location and known fate datasets, while also including brood-rearing areas that are understood to be threatened and important for population persistence. We combined predictive habitat map surfaces for each life stage and season with updated information on current occupancy patterns to classify habitat based on its suitability and probability of occupancy. We carried out additional steps to delineate specific example habitat management areas, specifically (1) incorporated corridors connecting key nesting and brood-rearing habitat, (2) corrected outputs for pre-wildfire habitat conditions within areas burned in the last 16 years, and (3) masked out areas of anthropogenic development. Our methodological example of deriving habitat management areas was intended to help inform decisions by BLM and other land managers regarding conservation and management of sage-grouse. Associated data products in the form of habitat maps provide updated, detailed, and comprehensive information about the status of habitats and can be useful to partner agencies in their efforts to designate and rank habitats for this species of high conservation concern in Nevada and California, with full recognition that on-the-ground field data and local sources of information and expertise should be used in conjunction with inferences from these models.

California, Idaho, Nevada↗
USGS2024

Comparing subduction ground-motion models to observations for Cascadia

We evaluate Cascadia subduction ground-motion models (GMMs), considered for the 2023 US National Seismic Hazard Model (NSHM) update, by comparing observations to model predictions. The observations comprise regional recordings from intraslab earthquakes, including contributions from 2021 and 2022 events in southern Cascadia and global records from interface earthquakes. Since the 2018 NSHM update, new GMMs for Cascadia have been published by the Next Generation Attenuation (NGA)-Subduction Project that require independent evaluation. In the regional intraslab comparisons, we highlight a characteristic frequency dependence for Cascadia data, with short periods having lower ground motions and longer periods being comparable to other subduction zones. We evaluate differences in northern and southern Cascadia and find that the NGA-Subduction GMMs developed using southern Cascadia data perform better in this region than the model that did not consider these data. We compare ground-motion variability in Cascadia with the NGA-Subduction model predictions and find differences at short periods ( T = 0.1 s) due to the use of global versus regional data in the development of these models. Moreover, the within-event component of aleatory variability from the GMMs overpredicts the standard deviation of Cascadia recordings at very short periods ( T < 0.05 s). Using global interface earthquakes as a proxy to evaluate the Cascadia GMMs, we find long-period overprediction from a simulation-based GMM and some of the empirical GMMs. When comparing recent observations, we find a similar misfit to GMMs and the 2010 and 2022 Ferndale earthquakes. Finally, we observe different basin amplification factors arising in different subsets of the data, which indicate that differences in basin factors between empirical GMMs could arise from the data selection choices by the developers. As part of evaluating the regional basin terms, we apply basin amplification factors from the magnitude 9 Cascadia earthquake simulations to the empirical GMMs for interface earthquakes. The comparisons presented in this study indicate that the NGA-Subduction GMMs for Cascadia perform well relative to observations and older subduction GMMs.

British Columbia, California, Oregon, Washington↗
USGS2024

A comparative analysis of OpenET for evaluating evapotranspiration in California almond orchards

The almond industry in California faces water management challenges that are being exacerbated by droughts, climate change, and groundwater sustainability legislation. The Tree-crop Remote sensing of Evapotranspiration eXperiment (T-REX) aims to explore opportunities to improve precision irrigation management for woody perennial cropping systems. Almond orchards in the California Central Valley were equipped with eddy covariance flux measurements to evaluate satellite remote sensing-based evapotranspiration (RSET) models. OpenET provides high-resolution (30-m spatial and daily temporal) RSET data, synthesizing decades of research for practical water management. This study provides an evaluation of OpenET performance at six almond sites covering a large range in soils, age, and variety. It also compares OpenET ensemble evapotranspiration (ET) data with applied irrigation and precipitation records over an additional 148 almond orchards located in the Central Valley of California. Results show OpenET models, including the ensemble ET value, produced reasonable and actionable ET values, with overall coefficient of determination (R 2 ) and mean absolute error values of 0.73- and 0.95-mm d −1 at the daily time step, respectively. However, given the temporal sampling of Landsat (8-day revisit) and the interpolation methods used, the assessed ET models had difficulty in capturing short-term variability in almond ET; for example, the rapid decline in measured ET observed as a response to lack of irrigation preceding and during almond harvest. The study also drew attention to the spatial complexity in scenarios where irrigated orchards are surrounded by hot/dry areas, causing discrepancies between measured and modeled ET values. In comparison with irrigation records, OpenET ensemble ET was capable of quantifying water input (applied irrigation + precipitation) in almond orchards to within 13 % when evaluating monthly data. Initial results presented here reinforce the idea that RSET models, such as in OpenET, are powerful tools, yet their application requires nuanced understanding and careful consideration of local conditions.

California↗
USGS2025

Lunar grid systems, coordinate systems, and map projections for the Artemis missions and lunar surface navigation

Foreward This document contains design specifications of a navigational standard for the Moon, including a Lunar Transverse Mercator system, a Lunar Polar Stereographic system, a Lunar Grid Reference System, and a unique coordinate structure, Artemis Condensed Coordinates, for Artemis mission navigation and lunar surface science. The National Aeronautics and Space Administration (NASA) Artemis campaign seeks to place humans on the Moon for the first time since the Apollo missions. Early Artemis missions are heavily focused on the lunar south pole, which promises to return valuable data on the Moon’s geologic record, amongst other mission objectives. Coordinate systems in use today for the lunar south pole provides crew members on the surface neither an efficient nor intuitive means to communicate their position and orientation. A novel grid coordinate system, the Lunar Grid Reference System, is proposed to address these concerns for use in real-time extravehicular activity operations on the lunar surface. The many stakeholders involved in the Artemis missions will need a common system to communicate position and orientation while astronauts are operating on the lunar surface. To that end, Artemis crew members will need that system to be efficient and intuitive to promote efficient extravehicular activity timelines and reduce confusion. In the context of this document, these characteristics are addressed on the design of lunar coordinate systems: Efficient.—The number of characters required to communicate a location within a desired precision level in both local and global contexts, and how many steps are required for a recipient or sender to interpret a location. Intuitive.—How well the system aligns with human perceptual abilities, and whether the system yields distances that have the same relationship to actual lunar surface distance in all directions from the point where a person is located. Technological systems are currently being investigated to supplement the crew members’ ability to locate and orient themselves and other assets on the lunar surface; however, it is unlikely that those systems will be fully operational for the first few landed missions. Even with future positional aids, crew members will still need an efficient and intuitive means to communicate position and orientation. In addition, if technological systems fail, the crews will require land navigation skills and have maps available, thus providing further motivation for a crew-centric coordinate system. The contents of this U.S. Geological Survey (USGS) document detail a comprehensive framework for standardizing lunar crewed surface navigation within NASA and outlines the protocols, methods, and designs necessary for achieving consistency and interoperability across relevant space mission teams and lunar surface navigators. Key components of this document include designs of map projections, projected coordinate reference systems (Lunar Transverse Mercator and Lunar Polar Stereographic systems), and a grid system (Lunar Grid Reference System and Artemis Condensed Coordinates) for the Moon. The work proposed in this document seeks to accomplish something similar to the National Geospatial-Intelligence Agency (NGA) document SIG 0012 (NGA, 2014a), but for using grid systems for the Moon. This report incorporates initial feedback and input from NASA’s Artemis Geospatial Data Team, NASA’s Flight Operations Directorate, National Geodetic Survey, USGS Astrogeology Science Center, and NGA and is intended to serve as a resource for all involved with the Artemis missions, as well as for engineers designing and operating lunar infrastructure.

Techniques and Methods↗
USGS2026

Linking distribution and return-on-investment models to optimize woody management for prairie grouse in Nebraska

Grasslands in Nebraska, USA, face threats from agricultural conversion, urban development, and woody encroachment, all of which negatively affect prairie grouse ( Tympanuchus spp.) populations. To optimize conservation planning, Nebraska wildlife agencies developed probabilistic area-based surveys for greater prairie-chicken ( T. cupido ) and sharp-tailed grouse ( T. phasianellus ) to sample landscapes across a range of environmental conditions. This design improves historical surveys and enables the development of distribution models that quantitatively define habitat associations and support scenario-based conservation planning. Using survey data collected during 2020–2022, we modeled prairie grouse occurrence and abundance as functions of land cover, topography, and climate using Bayesian logistic and zero-inflated negative binomial models with regularized horseshoe priors. We then conducted a maximum potential return-on-investment analysis of woody cover treatments, assuming sustained treatment success, relative to projected impacts of woody encroachment on prairie grouse populations by 2050. Among modeled associations were a positive association with grasslands having low woody cover and a negative association with grasslands having high woody cover. Across the 3-year period, median estimated annual populations were 142,380 for greater prairie-chicken (range of 95% CIs across years = 68,821–277,615) and 64,154 for sharp-tailed grouse (range of 95% CIs across years = 27,550–146,559). Under projected woody encroachment, mean predicted population declines were 10% for greater prairie-chicken (range of 95% CIs = 7–14%) and 6% for sharp-tailed grouse (range of 95% CIs = 5–7%). Areas with high prairie grouse density and low treatment costs in 2021, and high projected woody encroachment and population loss by 2050, offered the greatest return on investment for woody management. Return on investment was greatest in the northwestern Shortgrass Prairie ecoregion (northwestern Nebraska) for sharp-tailed grouse and the eastern Sandhills ecoregion (central Nebraska) for both species. These models underscore the value of evidence-based, quantitative approaches for prioritizing conservation actions on working lands. Scenario-based modeling could be extended to guide other treatments, such as optimizing restoration (e.g., Conservation Reserve Program) or incentivizing grassland persistence in areas with predicted climate resilience.

Nebraska↗
USGS2026

Widespread landslide activity in an extreme wet season and implications for regional sediment management, eastern San Francisco Bay area, California

Watershed sediment production is expected to increase in a warmer future with more extreme rain, with cascading effects throughout drainage and sediment-transport networks. This study investigated landscape-scale sediment movement in the eastern San Francisco Bay area, California, USA, during the extreme 2016–2017 wet season that brought major rainfall, landslides, and flooding. Mapping 8,928 landslides across a 1,050-km 2 study area revealed new sediment yield of 510–956 t/km 2 , equivalent to denudation of 193–361 mm/ky. These results correspond closely to long-term denudation rates in the northern and central California Coast Ranges, indicating that mass wasting in very wet years dominates long-term sediment mobilization. However, due to long residence times in drainage networks, the 2017 landslides contributed at most ∼1%–2% of the estimated locally derived fluvial sediment transport to San Francisco Bay. Although the amount of sediment mobilized did not threaten municipal water supplies, small rangeland impoundments in this mixed-use landscape lost storage capacity to new sedimentation. Considering regional sediment supply and demand, even the exceptionally large sediment delivery in an extreme wet year cannot meet the need for sediment to accrete tidal wetlands in the bay. To keep pace with rising sea levels, this abnormally high terrestrial sediment input would need to occur in 50 of the next 75 years, an unlikely occurrence due to the prevalence of recent drought years. Shoreline protection and restoration in the bay would need additional sources of sediment, such as through management of dredged sediment through beneficial-reuse programs.

California↗
USGS2024

U.S. Geological Survey Earthquake Hazards Program decadal science strategy, 2024–33

Executive Summary Earthquakes represent one of our Nation’s most significant and costly natural hazards, with estimated annual loses from earthquakes close to $15 billion in 2023. Over the past two centuries, 37 U.S. States have experienced an earthquake exceeding a magnitude of 5, and 50 percent of States have a significant potential for future damaging shaking; these statistics speak to the need for nationwide interest and investment in earthquake hazard characterization and risk reduction. Authorized under the Earthquake Hazards Reduction Authorization Act, the U.S. Geological Survey (USGS) Earthquake Hazards Program (EHP) provides the scientific information, situational awareness, and knowledge necessary to reduce deaths, injuries, and economic losses from earthquakes and earthquake-induced tsunamis, landslides, and soil liquefaction. The EHP supports activities in three focused topical areas: (1) earthquake monitoring, (2) hazard assessment, and (3) applied research, using the results of each—and the coordination among them—to further support risk translation and communication in regions at risk nationwide. For earthquake monitoring, the Advanced National Seismic System (ANSS), a cooperative effort of USGS networks, university partner regional seismic networks, and real-time geodetic networks, collects and analyzes data on earthquakes; issues timely, reliable notifications of their occurrence and impacts; and provides data for earthquake research, hazard, and risk assessment as a foundation for building an earthquake-resilient Nation. The USGS-operated ShakeAlert Earthquake Early Warning system is a recent addition to EHP’s ANSS infrastructure. In the realm of earthquake hazard assessment, the EHP contributes to earthquake risk mitigation strategies by developing the National Seismic Hazard Model and maps, and other related products, that describe the likelihood and potential effects of earthquakes nationwide, especially in the urban areas of highest risk. The EHP also conducts research on the causes, characteristics, and effects of earthquakes and prioritizes work that directly increases the accuracy and precision of earthquake hazards assessments, earthquake forecasts, and earthquake monitoring and situational-awareness products and that supports the Nation’s earthquake mitigation practices. Bridging the EHP’s efforts across research, hazard assessments, and earthquake monitoring is a broad and comprehensive collection of earthquake information products, including the National Seismic Hazard Model, ShakeAlert, and other products describing impact, such as ShakeMap and PAGER (Prompt Assessment of Global Earthquakes for Response), which have been developed and integrated into EHP’s real-time monitoring systems. EHP funds external partners to carry out many important collaborative activities through an active external grants program—one of the largest in the USGS—and through cooperative agreements with other partners such as the university-operated regional seismic networks, funded as part of the ANSS. To continue its support of earthquake hazard characterization and risk reduction, the EHP aims to strengthen its foundational products and practices while positioning itself to respond to the evolving needs of the Nation and follow best practices of the scientific community. This document describes a strategy for the program to ensure it can meet these demands. The foundational priorities outlined in this strategy represent those activities that remain critical to the core functionality of the program and those that can be supported under current fiscal year 2024-level appropriations. Priorities described as aspirational are important for future growth, and to maintain the program’s position as a leading global resource in earthquake science, but would require increases in appropriated funding to be fully realized. Across the program’s portfolio of activities, several major themes have been identified as the most critical activities to advance EHP science over the coming decade. Together, these activities provide the framework necessary to integrate critical hazard characterization and risk reduction activities across the program. They provide the structure for research to advance the understanding of where, when, and why earthquakes occur and how we can use improved knowledge to drive short-term and actionable forecasts of seismic activity. They expand the usefulness of critical earthquake products and advance the sophistication of those products to keep pace with the rapidly evolving needs of an ever-expanding user base while maintaining the position of the USGS as a global leader in earthquake science. Focus on system-level science. Establish an automated earthquake-processing pipeline. Enhance the accuracy and reliability of the ShakeAlert Earthquake Early Warning system and plan for extension to other regions. Implement time-dependent earthquake forecasting. Develop physically realistic models. Expand computational capacity. This science strategy is organized into three primary sections. The first section provides an overview of the EHP and its budget, governance, and program council. Readers familiar with the program may wish to focus on the second section, which describes the core of the science strategy, including priorities across each of the EHP’s major program activities in monitoring, hazard assessment, and targeted research. The third section outlines science priorities that cut across program activities, including those involving collaborations external to the EHP.

American Samoa, Guam, Northern Marianas Islands, U↗
USGS2025

Long‐period ground motions from dynamic rupture simulations of large earthquakes on the creeping Hayward–Calaveras–Rodgers Creek fault system

he Hayward, Calaveras, and Rodgers Creek faults in the San Francisco Bay region of California have a high probability of producing a large earthquake in the next decades. Although these faults creep, the creep is insufficient to keep up with their relatively rapid slip rates on their deepest sections, so they have been storing tectonic strain since their last large earthquakes, with the Hayward’s and Rodgers Creek’s more than 150 yr ago. We do not know what the next large Hayward–Calaveras–Rodgers Creek earthquakes will look like or how strongly they will shake the San Francisco Bay region. Harris et al. (2021) used the 3D dynamic (spontaneous) rupture method to simulate large earthquakes on these creeping faults. In this article, we examine the resulting simulated long‐period ( T > 1 s) ground shaking from 0 to 50 km distance, for earthquakes nucleating on the Hayward fault and earthquakes nucleating on the Rodgers Creek fault. We compare these simulated long‐period ground motions with the Boore et al. (2014) well‐established empirically based ground‐motion model suitable for the slowest material velocity in our 3D velocity structure. We find that the simulated long‐period ground motions from the creeping‐fault earthquake scenarios produce a reasonable agreement with the empirical expectations if frictional cohesion is included only where it is appropriate.

California↗
USGS2025

Quantitative mineral resource assessment of lithium pegmatite deposits in the Appalachian Orogen, USA

Lithium is classified as a U.S. critical mineral commodity, and its demand is projected to drastically increase through 2040, driven by electric vehicle production and energy storage applications (IEA 2021).Most global lithium production is not in the United States increasing vulnerability to a supply disruption. The U.S. Geological Survey is actively assessing domestic lithium deposits including lithium-bearing pegmatites in the Appalachian orogen. Permissive tracts for lithium pegmatite deposits were delineated by integrating lithological, tectonic, geochemical, geophysical, and mineral occurrence data. The geospatial data and permissive tracts were used to estimate the number of undiscovered lithium pegmatite deposits. Estimates were then integrated into probabilistic simulations along with a new global lithium pegmatite grade and tonnage dataset to quantify potential contained undiscovered lithium resources. An economic filter was used to estimate the amount of potentially recoverable undiscovered resources. Preliminary computations for the northern Appalachians, including application of the economic filter to the median recoverable contained resource, yields 900,000 metric tons of Li 2 O that correspond to enough Li 2 O to replace 127 years of import reliance at the current rate (7,100 t Li 2 O/yr; USGS, 2025). For the southern Appalachians, preliminary computations yielded 1,430,000 metric tons of Li 2 O, which corresponds to 201 years of import reliance.

Alabama, Connecticut, Delaware, Georgia, Maine, Ma↗
USGS2025

USGS—An Unparalleled Scientific Asset

The U.S. Geological Survey (USGS) delivers information critical to powering our economy, managing our natural resources, and keeping Americans safe and healthy. 1 Mapping the Nation $21B Geologic maps save users an estimated 15% in annual costs: a value of between $14B and $21B. $25.6B in annual value to users of imagery from Landsat satellites, which were codeveloped by NASA and the USGS and operated through their lifespans by the USGS. $13.5B in annual benefits is generated by the USGS's 3D Elevation Program. Securing America’s Energy Independence 44% USGS-identified undiscovered geothermal energy is equal to 44% of current U.S. electricity generation. 29.4B barrels of oil and 391.6 trillion cubic feet of gas in recoverable resources are available on U.S. public lands based on USGS assessments. Protecting Americans’ Health and Safety $424B in recent wildland fire damages highlight the need for USGS fire science, which supports efforts to protect communities and reduce risk. USGS earthquake, volcano, landslide, and coastal hazard monitoring and information save lives and minimize costs; for example, $2.8M can be saved because of USGS enhanced information about a Mauna Loa eruption. $4.5B is the estimated cost of annual flooding. Through a network of over 11,885 streamgages, the USGS supports public safety and enables forecasts, early warning systems, and management actions that protect lives and property. Supporting National Security $3.1B The USGS identified a $3.1B risk to the American economy if China restricts gallium imports. This is one example underscoring the importance of the USGS mapping critical minerals, investigating supply chains, and producing the Nation’s critical minerals list. Enhancing Our Lands and Waters $21B in estimated annual costs results from invasive species. The USGS’s invasive species research informs approaches used to reduce their effects on agriculture, water infrastructure, disease transmission, fisheries, and outdoor recreation. USGS innovations support early warnings for harmful algal blooms—over $2M in yearly benefits are provided to Kansas alone. $45B USGS science informs the management of big game (such as deer and elk). The big-game hunting industry contributes $45B to the U.S. economy. Fostering American Prosperity $4.1T Mineral commodities are necessary for the $4.1T in value added to the GDP by major industries that consume processed mineral materials and employ 1 million workers. Because of this, USGS data on mineral supply, demand, and trade are highly valued. 45,000 metric tons Rare earths power the growing technology economy, including cell phones, electric vehicles, and medical devices. For over 70 years, USGS work has supported the discovery of rare earth resources in California’s Mountain Pass area, which produced 45,000 metric tons of rare earth concentrates in 2024—over 11% of the global supply. Guarding American Food Security $70.2B USGS science informs early warning systems and management strategies to mitigate disease outbreaks in agriculture—critical research on highly pathogenic avian influenza, for example, helps safeguard the $70B value in poultry and egg production. $11.8B USGS groundwater tools are vital for agriculture; for example, in the Mississippi Alluvial Plain, 65% of farming relies on groundwater to support its $11.8B annual industry. 1 Values throughout are given in billions (B), millions (M), and trillions (T) of U.S. dollars. GDP is “Gross Domestic Product.” Percentages are shown as %.

General Information Product↗
USGS2026

Treatability study to evaluate bioremediation of trichloroethene at Site K, former Twin Cities Army Ammunition Plant, Arden Hills, Minnesota, 2020–22

Executive Summary Chlorinated solvents, including trichloroethene (TCE) and other chlorinated volatile organic compounds (cVOCs), are widespread contaminants that can be treated by bioremediation approaches that enhance anaerobic reductive dechlorination. Reductive dechlorination can be enhanced either through the addition of an electron donor (biostimulation) or the addition of a known dechlorinating culture (bioaugmentation) along with an electron donor. Although bioremediation has been applied at many TCE-contaminated groundwater sites, application in source zones at sites where residual dense nonaqueous phase liquid (DNAPL) is present is more limited. In this study, laboratory and field treatability tests were completed to evaluate the potential application of anaerobic bioremediation for a shallow groundwater plume containing TCE in a perched alluvial aquifer at Site K, former Twin Cities Army Ammunition Plant, Arden Hills, Minnesota, which was on the National Priorities List as the New Brighton/Arden Hills Superfund site until 2019. In addition to the presence of residual DNAPL at the site, temporal variability in groundwater flow directions and input of oxygenated recharge were possible complicating factors for the application of enhanced anaerobic biodegradation in the shallow plume. The Site K plume extends beneath the footprint of Building 103, which was demolished in 2006, and soil excavations to a maximum depth of 6 feet (ft) below ground surface in 2014 were known to leave some deeper contaminated soil in place in the TCE source area. Groundwater treatment at the site, formalized as part of the 1997 Record of Decision, has been in operation since 1986 and consists of an extraction trench at the downgradient edge of the plume to collect groundwater, which is then pumped to an on-site air stripper. Groundwater concentrations in the plume have been relatively stable since treatment began, indicating a continued source of TCE in the aquifer. The desire for a destructive remedy that would enhance the removal of cVOCs in the aquifer at Site K and shorten the remediation timeframe led the U.S. Army to request that the U.S. Geological Survey conduct a groundwater treatability study to assess bioremediation. This report describes the U.S. Geological Survey bioremediation treatability study conducted during 2020–22, including pre-design site characterization to assist in formulating the bioremediation approach, laboratory experiments to support the design of the field pilot test, and implementation and 1-year performance monitoring results for the pilot test. Pre-design site characterization included the collection of soil cores for cVOC analysis and lithologic descriptions and the re-installment of three wells to obtain hydrologic measurements and initial groundwater chemistry. Relatively flat head gradients were measured at the site, and substantial decreases in water-level elevations occurred from spring to summer (May–July 2021). Continuous water-level monitoring indicated a rapid response to precipitation. Groundwater flow velocities were consistently less than 0.5 foot per day, and the pilot bioremediation test was therefore designed with short lateral distances (about 5 ft) between injection and individual monitoring points. Soil analyses confirmed that high volatile organic compound contamination was left in place in the source area. The highest concentrations were near or in clay at the base of the perched aquifer. Concentrations of cVOCs measured in the replaced wells were consistent with historical data and had a maximum TCE concentration of 57,700 micrograms per liter (μg/L), indicative of nearby residual DNAPL based on the general rule of observed concentrations exceeding 1 percent of solubility. The primary TCE daughter product detected was 1,2-cis-dichloroethene (cisDCE), which indicated limited reductive dechlorination in the plume. Groundwater in both the source and downgradient areas was relatively reducing during the pre-design characterization, particularly in the source area where methane concentrations greater than 400 μg/L were measured. Initial laboratory tests conducted using native aquifer microorganisms from the three replacement wells showed that anaerobic TCE biodegradation rates were low when biostimulated with the addition of sodium lactate as an electron donor, also known as a carbon donor, and resulted in the production of only cisDCE. Addition of a known dechlorinating culture, WBC-2, however, resulted in rapid biodegradation and production of ethene, verifying complete reductive dechlorination of TCE. Microcosms constructed with aquifer soil collected from the site were used to evaluate other electron donors besides lactate to support reductive dechlorination by WBC-2, including corn syrup as an alternative fast-release compound and whey, soy-based vegetable oil, and 3-D Microemulsion (Regenesis, San Clemente, California) as slow-release compounds. First-order rate constants for total organic chlorine removal in these WBC-2 amended microcosms were greatest with either lactate or vegetable oil as the donor, ranging between 0.061 and 0.047 per day or corresponding half-lives of 11–15 days. Testing of commercial products in other WBC-2-bioaugmented microcosms led to selection for the field pilot test of an emulsified vegetable oil product that also contained some sodium lactate as a fast-release donor. Delaying the addition of WBC-2 relative to the donor in the microcosms resulted in the most rapid overall biodegradation rates. The selected design for the pilot test utilized three separate test plots, each about 30-ft wide and 60-ft long: plots GS1 and GS2 in the source area of the plume and plot GS3 in the downgradient area of the plume near the excavation trench. Each test plot had one injection well, one monitoring well upgradient from the injection point, and 12 surrounding monitoring wells in a grid to capture variable groundwater flow directions. Donor injections, which included a bromide tracer, were completed in October 2021, immediately following baseline sampling, and the WBC-2 culture was injected about 40 days later, between November 30 and December 2, 2021. Performance monitoring conducted until December 2022 included hydrologic measurements and analyses of cVOCs, redox-sensitive constituents, dissolved organic carbon, bromide, volatile fatty acids, compound-specific carbon isotopes, and microbial communities. The biogeochemical data collected during the pilot tests in the three treatment plots showed that enhanced, complete reductive dechlorination of cVOCs in the groundwater was achieved in the GS1 and GS3 plots. In contrast, evidence of distribution of the injected amendments and subsequent biodegradation was limited in GS2, which was in an area of more heterogeneous soil lithology and low water table elevations. The molar composition of volatile organic compounds in the GS1 and GS3 plots was dominated by ethene in wells that were reached by the injected amendments by the end of the monitoring period. In the GS1 and GS3 plots, similar patterns were observed of cVOC concentrations decreasing to near detection levels, or below, at some wells sampled in July and October 2022, whereas ethene became dominant and indicated sustained complete reductive dechlorination. Baseline cVOC concentrations were more than a factor of 10 higher in the groundwater in the GS1 plot than in GS3, but no apparent inhibition of complete dechlorination occurred. As expected from the initial pre-design site data and the laboratory experiments, enhanced dissolution of residual DNAPL coupled to biodegradation was evident in the GS1 plot, where a marked increase in dichloroethene (DCE) above the initial baseline and upgradient TCE and DCE concentrations occurred. DCE concentrations subsequently declined where DNAPL dissolution was evident, concurrent with production of vinyl chloride and then predominantly ethene. Thus, overall biodegradation rates outpaced the DNAPL dissolution and desorption and DCE production in the source area. This success in complete degradation to predominantly ethene was achieved even in areas where the DCE concentrations reached a maximum of about 30,000 μg/L. Compound specific isotope analysis of carbon in TCE, cisDCE, trans-1,2-dichloroethene, and vinyl chloride was conducted to provide another line of evidence of the occurrence and extent of anaerobic biodegradation. Along a flow path in each plot that was affected by the injected amendments, carbon isotopes in the TCE and daughter cVOCs in the groundwater became isotopically heavier, indicating biodegradation. Enhanced biodegradation rates calculated from the field tests in GS1 and GS3 showed half-lives of 36.9–75.3 days for DCE degradation and 9.48–38.5 days for ethene production. Notably, these ethene production rates calculated from the field tests are consistent with the results of WBC-2-bioaugmented microcosms amended with either lactate or vegetable oil, which had half-lives for total organic chlorine removal that ranged from 11 to 15 days. These rates indicated rapid enhanced biodegradation, which is promising for application of a full-scale bioremediation remedy. Ultimately, however, the mass of residual or sorbed TCE in the aquifer that remains accessible for dissolution and biodegradation would likely control the time required for a full-scale bioremediation effort to achieve performance goals for TCE and cisDCE specified in the Record of Decision for Site K. The field pilot tests showed that the relatively low hydraulic head gradients and temporal changes in groundwater flow directions in the shallow aquifer would add complexity to a full-scale bioremediation effort. The radius of influence (ROI) at GS1 and GS3 (16.3 ft and 12.7 ft, respectively) were close to the design ROI of 15 ft. The estimated ROI at GS2 was about four times the design ROI, but may be less reliable at this location owing to groundwater flow direction. In addition, the low temperatures following WBC-2 injection in late November to early December 2021, in combination with the low hydraulic head gradients, were probably major factors in the delay observed before the onset of enhanced biodegradation following injection of the culture. Additional test injections could be beneficial to optimize the timing of donor and culture injections with the variable temperatures and hydraulic head in the shallow aquifer.

Minnesota↗
USGS2025

Local, regional, and distal recordings of seismic unrest at Tau Island volcano, American Samoa

A seismic swarm near Taʻū Island, a volcanic island in eastern American Samoa, occurred from July to October 2022. The earliest unrest was noted as felt shaking reports in late July, and instrumentation varied in the beginning of the sequence as the U.S. Geological Survey (USGS) Hawaiian Volcano Observatory responded by installing temporary and then permanent seismometers to monitor the activity. This network variability made it difficult to characterize the earliest seismicity and contextualize the entire sequence to discriminate between an underlying tectonic or volcanic source. Here, we present results analyzing hydroacoustic detections from an International Monitoring System hydrophone array near Wake Island, 4500 km northwest of Taʻū Island volcano. Using least-squares beamforming analysis, we create a catalog of T-wave detections from the direction of Taʻū Island to track the earthquakes, some of which were located by the USGS National EarthquakeInformation Center. Both the rate and hydroacoustic pressures, which we interpret as a proxy for earthquake size, gradually increased from late July to August, peaking on August 19 (rate) and August 24 (size), before decreasing to background in late September. Minutes-long bursts of tremor were also contemporaneously recorded as local network data became avail-able on August 20. Tremor activity continued throughout the rest of August, peaking on August 25, before ending in earlySeptember. These tremor bursts were band-limited to ~ 1–5 Hz and recorded as S waves at a regional station on the island of Upolu in Samoa, 250 km to the west of Taʻū Island. Our results do not constrain the tremor locations, but comparisons of earthquake and tremor reduced displacements recorded locally and regionally suggest a deeper tremor source. We interpret the increase in earthquake size and rate, together with the occurrence, characteristics, and relative depth of the tremor to be the result of magmatic activity beneath Taʻū Island volcano.

American Samoa, Taʻū Island↗
USGS2024

Methods to evaluate and improve the modeling of rupture directivity in assessment of seismic hazard

In recent years, there have been several advancements related to the modelling of near-source effects of earthquake rupture on strong ground shaking, leading to an improved characterization of ground motions and resulting seismic hazard. Some of these modifications have stemmed from physics-based numerical modelling of the earthquake rupture process, using physics-based dynamic rupture simulations. These contributions have led to a better understanding of how fault rupture characteristics, geometry, and the style of faulting can interact with the hypocenter-dependence on the path from source to site that may ultimately guide the development of seismic directivity models. Moving forward, the application of modern techniques can be used to incorporate these source characteristics and near-fault ground motion behavior that contribute to the azimuthally varying effects that result in rupture directivity. One example is the application of machine learning methods to support more automated integration of new predictor variables in model development and open more evaluation opportunities to access residuals. Here, we utilize several techniques to take advantage of the plethora of synthetic data and its ability to supplement preexisting trends observed in data. We showcase two examples of how models can be either developed, expanded upon, or constrained using artificial neural network model (ANNs). We evaluate the performance of the ANN with existing methods, comparing misfit, potential limitations, and ability to continue to improve upon these methods in the future. One approach uses a set of simulations with corresponding synthetic ground motions from the Southern California Earthquake Center (SCEC) CyberShake study to develop a ground motion model adapted to incorporate seismic directivity information using an ANN. This large database (TBs) enables us to train the model to capture magnitude, period, and distance variations and how these parameters relate to amplification from hypocenters located along finite-faults. In some cases, there is reduced misfit from better representing source features that aren’t included in base ground motion models that neglect hypocenter location (e.g. azimuthal variation, source-to-site terms). Another ANN method uses a shallow-layered neural network model to better fit a hypocenter-independent model. This method adjusts the median and aleatory variability to account for the averaged impact of various hypocenter distributions to fit the underlying directivity adjustment model. This method serves as a template to apply to other directivity models, improving computational efficiency and more readily enabling integration in hazard codes.

California↗