USGS Science⌕ Search

SEARCH · USGS Science

Results for “Earth and Space Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12Linked to original sources

A quasi-global precipitation time series for drought monitoring

Estimating precipitation variations in space and time is an important aspect of drought early warning and environmental monitoring. An evolving drier-than-normal season must be placed in historical context so that the severity of rainfall deficits may quickly be evaluated. To this end, scientists at the U.S. Geological Survey Earth Resources Observation and Science Center, working closely with collaborators at the University of California, Santa Barbara Climate Hazards Group, have developed a quasi-global (50°S–50°N, 180°E–180°W), 0.05° resolution, 1981 to near-present gridded precipitation time series: the Climate Hazards Group InfraRed Precipitation with Stations (CHIRPS) data archive.

Data Series↗

The EOS land validation core sites: background information and current status

The EOS Land Validation Core Sites1 will provide the user community with timely ground, aircraft, and satellite data for EOS science and validation investigations. The sites, currently 24 distributed worldwide, represent a consensus among the instrument teams and validation investigators and represent a range of global biome types (see Figure 1 and Table 1; Privette et al., 1999; Justice et al., 1998). The sites typically have a history of in situ and remote observations and can expect continued monitoring and land cover research activities. In many cases, a Core Site will have a tower equipped with above-canopy instrumentation for nearcontinuous sampling of landscape radiometric, energy and CO2 flux, meteorological variables, and atmospheric aerosol and water vapor data. These will be complemented by intensive field measurement campaigns. The data collected at these sites will provide an important resource for the broader science community. These sites can also provide a foundation for a validation network supported and used by all international space agencies.

The Earth Observer↗

Monitoring volcanic threats using ASTER satellite data

This document summarizes ongoing activities associated with a research project funded by the national aeronautics and space administration (NASA) focusing on volcanic change detection through the use of satellite imagery. This work includes systems development as well as improvements in data analysis methods. Participating organizations include the NASA land processes distributed active archive center (LP DAAC) at the U.S. geological survey (USGS) center for earth resources observation and science (EROS), the Advanced spaceborne thermal emission and reflection radiometer (ASTER) science team, the Alaska volcano observatory (AVO) at the USGS Alaska science center, the jet propulsion laboratory/California Institute of Technology (JPL/CalTech), the University of Pittsburgh, and the University of Alaska Fairbanks.

Conference Paper↗

EAARL Topography-Padre Island National Seashore

This Web site contains 116 Lidar-derived bare earth topography maps and GIS files for Padre Island National Seashore-Texas. These Lidar-derived topography maps were produced as a collaborative effort between the U.S. Geological Survey (USGS) Florida Integrated Science Center (FISC) St. Petersburg, Florida, the National Park Service (NPS) Gulf Coast Network, Inventory and Monitoring Program, and the National Aeronautics and Space Administration (NASA) Wallops Flight Facility. One objective of this research is to create techniques to survey coral reefs and barrier islands for the purposes of geomorphic change studies, habitat mapping, ecological monitoring, change detection, and event assessment. As part of this project, data from an innovative instrument under development at the NASA Wallops Flight Facility, the NASA Experimental Airborne Advanced Research Lidar (EAARL) are being used. This sensor has the potential to make significant contributions in this realm for measuring subaerial and submarine topography wthin cross-environment surveys. High spectral resolution, water-column correction, and low costs were found to be key factors in providing accurate and affordable imagery to costal resource managers.

Texas↗

Improved outgassing models for the Landsat-5 thematic mapper

The Landsat-5 (L5) Thematic Mapper (TM) detectors of the short wave infrared (SWIR) bands 5 and 7 are maintained on cryogenic temperatures to minimize thermal noise and allow adequate detection of scene energy. Over the instrument's lifetime, gain oscillations are observed in these bands that are caused by an ice-like contaminant that gradually builds up on the window of a dewar that houses these bands' detectors. This process of icing, an effect of material outgassing in space, is detected and characterized through observations of Internal Calibrator (IC) data. Analyses of IC data indicated three to five percent uncertainty in absolute gain estimates due to this icing phenomenon. The thin-film interference lifetime models implemented in the image product generation systems at the U.S. Geological Survey (USGS) Center for Earth Resources Observation and Science (EROS) successfully remove up to 80 percent of the icing effects for the image acquisition period from the satellite's launch in 1984 until 2001; however, their correction ability was found to be much lower for the time thereafter. This study concentrates on improving the estimates of the contaminant film growth rate and the associated change in the period of gain oscillations. The goal is to provide model parameters with the potential to correct 70 to 80 percent of gain uncertainties caused by outgassing effects in L5 TM bands 5 and 7 over the instrument's entire lifetime.

Conference Paper↗

Geologic map of the Palo Alto and part of the Redwood Point 7-1/2' quadrangles, San Mateo and Santa Clara Counties, California

The Palo Alto and southern part of the Redwood Point 7-1/2' quadrangles cover an area on the San Francisco peninsula between San Francisco Bay and the Santa Cruz Mountains. San Francisquito and Los Trancos Creeks, in the southeastern part of the map area, form the boundary between San Mateo and Santa Clara Counties. The area covered by the geologic map extends from tidal and marsh lands at the edge of the bay southward across a gently sloping alluvial plain to the foothills of the northern Santa Cruz Mountains. The foothills are separated from the main mass of the mountains by two northwest-striking faults, the San Andreas and Pilarcitos, that cross the southwest corner of the map area (fig. 1). The map and adjoining areas are here divided into three structural blocks juxtaposed along these faults, adopting the scheme of Nilsen and Brabb (1979): (1) the San Francisco Bay block lying east of the San Andreas Fault Zone; (2) the Pilarcitos block lying between the San Andreas and Pilarcitos Faults; and (3) the La Honda block that includes the main mass of the Santa Cruz Mountains lying west of the Pilarcitos Fault. The west boundary of the La Honda block is the Seal Cove-San Gregorio Fault. Pre-late Pleistocene Cenozoic rocks of the foothills have been compressed into northwest-striking folds, which have been overridden by Mesozoic rocks along southwest-dipping low-angle faults. Coarse- to fine-grained upper Pleistocene and Holocene alluvial and estuarine deposits, eroded from the foothills and composing the alluvial plain, are essentially undeformed. Most of the alluvial plain, including some parts of the marsh land that borders the bay, has been covered by residential and commercial developments, and virtually all of the remaining marsh land has been diked off and used as salt evaporating ponds. The map area includes parts of the municipalities of San Carlos, Redwood City, Atherton, Woodside, Portola Valley, Menlo Park, and East Palo Alto in San Mateo County; and Palo Alto, Stanford University, Los Altos, and Los Altos Hills in Santa Clara County (fig. 2). Much of the university land remains as undeveloped open space surrounded by densely urbanized lands. Geologic maps of all or part of the present map area have been prepared previously by Branner and others (1909), Thomas (1949), Dobbs and Forbes (1960), Dibblee (1966), Page and Tabor (1967), Pampeyan (1970a, 1970b), Beaulieu (1970), Helley and others (1979), and by numerous Stanford University students working on topical earth science problems. In addition, numerous engineering geologic studies have been conducted for site investigations relating to residential and commercial developments and, in particular, for construction of the Stanford Linear Accelerator Center (SLAC). The reports pertaining to SLAC are summarized in Skjei and others (1965) and more recently in a report by Earth Sciences Associates (1983). The interested reader is referred to Brabb and Pampeyan (1983), Brabb and others (1982), Wentworth and others (1985), Wieczorek and others (1985), Thomson and Evernden (1986), Brabb and Olson (1986), Youd and Perkins (1987), Perkins (1987), and Mark and Newman (1988) for information pertaining to geology, history, slope stability, seismic shaking, liquifaction potential, and faulting and seismicity in San Mateo County, some of which can be applied directly to northern Santa Clara County. Field work for the present geologic map was done in 1962-1964 and 1966 when SLAC and Interstate 280 were in early stages of construction. Only minor additions and revisions have been made since this mapping was first released (Pampeyan, 1970a; 1970b) as it was impractical to keep pace with accelerating urban development of the area. Geologic units of the flatlands area are largely adapted from Helley and Lajoie (1979).

California↗

EAARL topography: Cape Cod National Seashore

This Web site contains 90 Lidar-derived bare earth topography maps and GIS files for the Cape Cod National Seashore. These Lidar-derived topography maps were produced as a collaborative effort between the U.S. Geological Survey (USGS) Florida Integrated Science Center (FISC) St. Petersburg, Florida, the National Park Service (NPS), Northeast Coastal and Barrier Network, Inventory and Monitoring Program, and the National Aeronautics and Space Administration (NASA) Wallops Flight Facility. One objective of this research is to create techniques to survey coral reefs and barrier islands for the purposes of geomorphic change studies, habitat mapping, ecological monitoring, change detection, and event assessment. As part of this project, data from an innovative instrument under development at the NASA Wallops Flight Facility, the NASA Experimental Airborne Advanced Research Lidar (EAARL) are being used. This sensor has the potential to make significant contributions in this realm for measuring subaerial and submarine topography wthin cross-environment surveys. High spectral resolution, water-column correction, and low costs were found to be key factors in providing accurate and affordable imagery to coastal resource managers.

Massachusetts↗

Demonstrating the value of Earth observations—methods, practical applications, and solutions—group on Earth observations side event proceedings

Executive Summary The U.S. Geological Survey, the National Oceanic and Atmospheric Administration, the European Association for Remote Sensing Companies, and the European Space Agency in coordination with the GEOValue Community hosted a side event to the Group on Earth Observations Plenary on October 23–24, 2017, in Washington, D.C. The workshop, entitled “Demonstrating the Value of Earth Observations: Methods, Practical Applications and Solutions,” brought together more than 60 international experts including economists, scientists, and engineers to consider the state of the science and applications of valuing Earth observations (EO). This 2-day workshop built upon previous activities developed under the GEOValue initiative. This workshop brought together expert analysts from multiple disciplines and backgrounds who are developing methods to identify and measure the value of information generated from the use of satellite and in-situ data. The mix of government agencies, international financial institutions, and independent consultants who participated in the workshop blended to develop a rich mix of views, approaches, and outcomes. During the first part of the workshop, the focus was on the latest science in valuing EO. A number of methodologies were described. Approaches generally assess the societal benefits of specific actions (for example, investments in EO). Some methods focus on broad measures of economic activity (for example, gross domestic product) or methods to assess total economic value such as contingent valuation surveys. Alternatively, use-case approaches (a use case is defined as an evaluation in which one or more decisions, applications, or other uses of data, information, and information products are specifically considered) start with the specific actions and how information is used to support decision making and affect outcomes. The second part of the meeting was focused on the use and development of value chains and decision trees. A value chain can be defined as the set of value-adding activities that one or more organizations perform in creating and distributing goods and services. In terms of EO, the value chain approach can be applied to consider societal benefits of the data and assess the value of data and data features. The EO value chain considers the geospatial data sources and the processing of the data into value added information to be incorporated into decision-support systems, leading to decision makers’ actions. To understand the value of EO, one would also need to recognize the demand side of the equation or how EO benefits users. Extending the value chain concept and incorporating tenets of Bayesian decision making, a decision tree would include one or more use cases. The value provided by the marginal increase in information could flow from one or several parts of the supply side of the value chain. The decision tree is based on the premise that information has no value if it is not used in at least one decision. By connecting the value chain and the decision tree, a framework is created that allows for conceptualizing the value of EO in its many uses. One can then apply economic techniques to monetize the marginal benefit of an outcome with information versus one without. A third part of the meeting applied the value chain and decision-tree frameworks to five specific thematic areas, each with the focus of using information for a decision point: Effect of increasing temperatures on human health; Flooding—Mitigating, managing, and avoiding impacts to safety and property damage; Harmful algal blooms—Effects on human health, recreation, and tourism; Energy and mineral supply—Mitigating, managing, and avoiding impacts of shortfalls on the economy; and Effects of natural hazards on transportation systems—Effects on mobility, safety, and the economy. During the working session, five separate groups worked to define and delineate the value chains and decision trees associated with each topic, discussing the related challenges and data needs. The outcomes were reported back to the full group. Because of the complexity of the topics, most groups first identified a network of value chains and then narrowed the scope to develop a single value chain to address their group’s topic. Although they worked separately and on different topics, the groups came to similar conclusions, concurring that the value chain and decision-tree frameworks are very effective for informing quantitative impact assessments and developing a relatable narrative to assist the public in understanding the link between EO and citizens.

Open-File Report↗

Variable exhumation rates and variable displacement rates: Documenting recent slowing of Himalayan shortening in western Bhutan

We link exhumational variability in space and time to the evolving geometry of the Himalayan fold–thrust belt in western Bhutan. By combining new and published geochronologic and thermochronologic data we document the burial age, peak temperatures and complete cooling history from 20 Ma to the present over an across-strike distance of ∼125 km. These integrated cooling curves highlight windows of fast exhumation that vary spatially and temporally. We propose that pulses of fast exhumation are a result of structures that facilitate the vertical motion of material, illustrated in sequentially-restored cross sections. Due to a range of permissible geometries at depth, we explore and evaluate the impact of geometry on kinematics and rates of deformation. The linked cooling history and cross sections provide estimates of both magnitude and timing of thrust sheet displacement and highlight temporal variability in potential shortening rates. Structural and chronologic data illustrate a general north to south progression of Himalayan deformation, with emplacement of the Main Central thrust (MCT), Paro thrust and Shumar thrust by 12 to no later than 9 Ma. Two different geometries and kinematic scenarios for the Lesser Himalayan duplex are proposed. A north to south propagating duplex system requires that the southern portion of that system, south of the MCT, deformed and cooled by 9 Ma, leaving only the southernmost thrust sheets, including the Main Boundary and Main Frontal thrusts, to deform between 9 and 0 Ma. This limited post 9 Ma shortening would necessitate a marked slowdown in convergence accommodated on the Main Himalayan thrust. A two-tiered duplex system, which allows for the Paro window duplex and the southern Baxa duplex to form simultaneously, permits duplex formation and accompanying exhumation until 6 Ma. Limited cooling from ∼200 °C to the surface post 6 Ma suggests either a decrease in shortening rates from 6 to 0 Ma or that duplex formation and exhumation are temporally decoupled. Our combined cooling curves highlight that the youngest cooling ages may not mark the fastest thrusting rates or the window of fastest exhumation. Instead, temporal variations in exhumation are best viewed through identifying transients in exhumation rate. We suggest that the strongest control on exhumation magnitude and variability is fold–thrust belt geometry, particularly the locations and magnitudes of footwall ramps, which can change over 10ʼs of km distance. Balanced cross sections predict the location and magnitude of these ramps and how they vary in space and time, providing an untapped potential for testing permissible cross-section geometries and kinematics against measured cooling histories.

Earth and Planetary Science Letters↗

Measuring SO2 emission rates at Kīlauea Volcano, Hawaii, using an array of upward-looking UV spectrometers, 2014-2017

Retrieving accurate volcanic sulfur dioxide (SO 2 ) gas emission rates is important for a variety of purposes. It is an indicator of shallow subsurface magma, and thus may signal impending eruption or unrest. SO 2 emission rates are significant for accurately assessing climate impact, and providing context for assessing environmental, agricultural, and human health effects during volcanic eruptions. The U.S. Geological Survey Hawaiian Volcano Observatory uses an array of ten fixed, upward-looking ultraviolet spectrometer systems to measure SO 2 emission rates at 10-s sample intervals from the Kīlauea summit. We present Kīlauea SO 2 emission rates from the volcano’s summit and middle East Rift Zone during 2014–2017 and discuss the major sources of error for these measurements. Due to the wide range of SO 2 emissions encountered at the summit vent, we used a variable wavelength spectral analysis range to accurately quantify both high and low SO 2 column densities. We compare measured emission rates from the fixed spectrometer array to independent road and helicopter-based traverse measurements and evaluate the magnitudes and sources of uncertainties for each method. To address the challenge of obtaining accurate plume speed measurements, we examine ground-based wind-speed, plume speed tracking via spectrometer, and SO 2 camera derived plume speeds. Our analysis shows that: (1) the summit array column densities calculated using a dual fit window, are within -6 to +22% of results obtained with a variety of other conventional and experimental retrieval methods; (2) emission rates calculated from the summit array located ∼3 km downwind provide the best, practical estimate of summit SO 2 release under normal trade wind conditions; (3) ground-based anemometer wind speeds are 22% less than plume speeds determined by cross-correlation of plume features; (4) our best estimate of average Kīlauea SO 2 release for 2014–2017 is 5100 t/d, which is comparable to the space-based OMI emissions of 5518 t/d; and (5) short-term variability of SO 2 emissions reflects Kīlauea lava lake dynamics.

Hawaii↗

Reviews and syntheses: Variable inundation across Earth's terrestrial ecosystems

The structure, function, and dynamics of Earth's terrestrial ecosystems are profoundly influenced by how often (frequency) and how long (duration) they are inundated with water. A diverse array of natural and human-engineered systems experience temporally variable inundation whereby they fluctuate between inundated and non-inundated states. Variable inundation spans extreme events to predictable sub-daily cycles. Variably inundated ecosystems (VIEs) include hillslopes, non-perennial streams, wetlands, floodplains, temporary ponds, tidal systems, storm-impacted coastal zones, and human-engineered systems. VIEs are diverse in terms of inundation regimes, water chemistry and flow velocity, soil and sediment properties, vegetation, and many other properties. The spatial and temporal scales of variable inundation are vast, ranging from sub-meter to whole landscapes and from sub-hourly to multi-decadal. The broad range of system types and scales makes it challenging to predict the hydrology, biogeochemistry, ecology, and physical evolution of VIEs. Despite all experiencing the loss and gain of an overlying water column, VIEs are rarely considered together in conceptual, theoretical, modeling, or measurement frameworks and approaches. Studying VIEs together has the potential to generate mechanistic understanding that is transferable across a much broader range of environmental conditions, relative to knowledge generated by studying any one VIE type. We postulate that enhanced transferability will be important for predicting changes in VIE function in response to global change. Here we aim to catalyze cross-VIE science that studies drivers and impacts of variable inundation across Earth's VIEs. To this end, we complement expert mini-reviews of eight major VIE systems with overviews of VIE-relevant methods and challenges associated with scale. We conclude with perspectives on how cross-VIE science can derive transferable understanding via unifying conceptual models in which the impacts of variable inundation are studied across multi-dimensional environmental space.

Biogeosciences↗

Landsat surface reflectance quality assurance extraction (version 1.7)

The U.S. Geological Survey (USGS) Land Remote Sensing Program is developing an operational capability to produce Climate Data Records (CDRs) and Essential Climate Variables (ECVs) from the Landsat Archive to support a wide variety of science and resource management activities from regional to global scale. The USGS Earth Resources Observation and Science (EROS) Center is charged with prototyping systems and software to generate these high-level data products. Various USGS Geographic Science Centers are charged with particular ECV algorithm development and (or) selection as well as the evaluation and application demonstration of various USGS CDRs and ECVs. Because it is a foundation for many other ECVs, the first CDR in development is the Landsat Surface Reflectance Product (LSRP). The LSRP incorporates data quality information in a bit-packed structure that is not readily accessible without postprocessing services performed by the user. This document describes two general methods of LSRP quality-data extraction for use in image processing systems. Helpful hints for the installation and use of software originally developed for manipulation of Hierarchical Data Format (HDF) produced through the National Aeronautics and Space Administration (NASA) Earth Observing System are first provided for users who wish to extract quality data into separate HDF files. Next, steps follow to incorporate these extracted data into an image processing system. Finally, an alternative example is illustrated in which the data are extracted within a particular image processing system.

Techniques and Methods↗

Geographic data from space

Space science has been called “the collection of scientific problems to which space vehicles can make some specific contributions not achievable by ground-based experiments.” Geography, the most spatial of the sciences, has now been marked as one of these “space sciences.” The National Aeronautics and Space Administration (NASA) is sponsoring an investigation to identify the Potential geographic benefits from the nation’s space program. This is part of NASA’s long-range inquiry to determine the kinds of scientific activities which might profitably be carried out on future space missions. Among such future activities which are now being planned by NASA are a series of manned earth orbital missions, many of which would be devoted to research. Experiments in physics, astronomy, geophysics, meteorology, and biology are being discussed for these long-range missions. The question which is being put to geographers is, essentially, what would it mean to geographic research to have an observation satellite (or many such satellites) orbiting the earth, gathering data about earth-surface features and environments?

Professional Geographer↗

Sr, Nd, and Pb isotopes of ultramafic xenoliths in volcanic rocks of Eastern China: Enriched components EMI and EMII in subcontinental lithosphere

The U-Th-Pb, Sm-Nd, and Rb-Sr isotopic systematics of mafic and ultramafic xenolithic rocks and associated megacrystic inclusions of aluminous augite and garnet, that occur in three alkalic volcanic suites: Kuandian in eastern Liaoning Province, Hanluoba in Hebei Province, and Minxi in western Fujian Province, China are described. In various isotopic data plots, the inclusion data invariably fall outside the isotopic ranges displayed by the host volcanic rocks, testifying to the true xenolithic nature of the inclusions. The major element partitioning data on Ca, Mg, Fe, and Al among the coexisting silicate minerals of the xenoliths establish their growth at ambient mantle temperatures of 1000–1100°C and possible depths of 70–80 km in the subcontinental lithosphere. Although the partitioning of these elements reflects equilibrium between coexisting minerals, equilibria of the Pb, Nd, and Sr isotopic systems among the minerals were not preserved. The disequilibria are most notable with respect to the 206 Pb/ 204 Pb ratios of the minerals. On a Nd-Sr isotopic diagram, the inclusion data plot in a wider area than that for oceanic basalts from a distinctly more depleted component than MORB with higher 143 Nd/ 144 Nd and a much broader range of 87 Sr/ 86 Sr values, paralleling the theoretical trajectory of a sea-water altered lithosphere in Nd-Sr space. The garnets consistently show lowerμ andκ values than the pyroxenes and pyroxenites, whereas a phlogopite shows the highestμ andκ values among all the minerals and rocks studied.

Earth and Planetary Science Letters↗

An overview of sensor calibration inter-comparison and applications

Long-term climate data records (CDR) are often constructed using observations made by multiple Earth observing sensors over a broad range of spectra and a large scale in both time and space. These sensors can be of the same or different types operated on the same or different platforms. They can be developed and built with different technologies and are likely operated over different time spans. It has been known that the uncertainty of climate models and data records depends not only on the calibration quality (accuracy and stability) of individual sensors, but also on their calibration consistency across instruments and platforms. Therefore, sensor calibration inter-comparison and validation have become increasingly demanding and will continue to play an important role for a better understanding of the science product quality. This paper provides an overview of different methodologies, which have been successfully applied for sensor calibration inter-comparison. Specific examples using different sensors, including MODIS, AVHRR, and ETM+, are presented to illustrate the implementation of these methodologies.

Frontiers of Earth Science in China↗

An overview of the Landsat Data Continuity Mission

The Landsat Data Continuity Mission (LDCM) is the follow-on mission to Landsat 7 and will be the eighth mission in the Landsat series. The mission is in development via an interagency partnership between the National Aeronautics and Space Administration (NASA) and the Department of Interior (DOI) / United States Geological Survey (USGS). The LDCM satellite will carry two earth-observing sensors, the Operational Land Imager (OLI) to collect image data for nine spectral bands in the reflective portion of the spectrum and the Thermal Infrared Sensor (TIRS) to collect coincident image data for two thermal spectral bands. The LDCM ground segment will control the satellite and will receive, process, archive, and distribute the science data collected by the OLI and TIRS instruments. The USGS Earth Resources Observation & Science Center (EROS) will distribute LDCM data products at no cost to requestors. The mission objective is to continues the Landsat program's collection, archive, and distribution of multispectral imagery affording global, synoptic, and repetitive coverage of the Earth's land surfaces at a scale where natural and human-induced changes can be detected, differentiated, characterized, and monitored over time. The LDCM launch readiness date is currently December, 2012.

Conference Paper↗

The role of fault zone drilling

The objective of fault-zone drilling projects is to directly study the physical and chemical processes that control deformation and earthquake generation within active fault zones. An enormous amount of field, laboratory, and theoretical work has been directed toward the mechanical and hydrological behavior of faults over the past several decades. Nonetheless, it is currently impossible to differentiate between – or even adequately constrain – the numerous conceptual models of active faults proposed over the years. For this reason, the Earth science community is left in the untenable position of having no generally accepted paradigm for the mechanical behavior of faults at depth. One of the primary causes for this dilemma is the difficulty of either directly observing or inferring physical properties and deformation mechanisms along faults at depth, as well as the need to observe directly key parameters such as the state of stress acting on faults at depth, pore fluid pressure (and its possible variation in space and time), and processes associated with earthquake nucleation and rupture. Today, we know very little about the composition of active faults at depth, their constitutive properties, the state of in situ stress or pore pressure within fault zones, the origin of fault-zone pore fluids, or the nature and significance of time-dependent fault-zone processes.

Book chapter↗

Centralized mission planning and scheduling system for the Landsat Data Continuity Mission

Satellites in Low Earth Orbit provide missions with closer range for studying aspects such as geography and topography, but often require efficient utilization of space and ground assets. Optimizing schedules for these satellites amounts to a complex planning puzzle since it requires operators to face issues such as discontinuous ground contacts, limited onboard memory storage, constrained downlink margin, and shared ground antenna resources. To solve this issue for the Landsat Data Continuity Mission (LDCM, Landsat 8), all the scheduling exchanges for science data request, ground/space station contact, and spacecraft maintenance and control will be coordinated through a centralized Mission Planning and Scheduling (MPS) engine, based upon GMV’s scheduling system flexplan9 . The synchronization between all operational functions must be strictly maintained to ensure efficient mission utilization of ground and spacecraft activities while working within the bounds of the space and ground resources, such as Solid State Recorder (SSR) and available antennas. This paper outlines the functionalities that the centralized planning and scheduling system has in its operational control and management of the Landsat 8 spacecraft.

Conference Paper↗