USGS Science⌕ Search

SEARCH · USGS Science

Results for “Advances in Water Resources”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12Linked to original sources
USGS2021

Maximizing the science and resource mapping potential of Orbital VSWIR Spectral measurements of Mars

The last 16 years witnessed a rapid growth in understanding the composition and aqueous alteration of Mars’ surface from orbital data from the Observatoire pour la Mineralogie, l’Eau, les Glaces et l’Activité (OMEGA) [1] and Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) [2]. Both are sensitive to water-, hydroxyl-, sulfate-, and carbonate-bearing and ferric phases that record past liquid water. As the spatial resolution of such data has improved, and supporting laboratory data have been acquired, the diversity of mineral phases that are recognized has likewise expanded. The same phases typically contain recoverable water, a resource for future human exploration, and are the only near-surface water reservoir in the >50% of Mars over which ice likely does not occur in the shallowest subsurface. Knowledge of the distribution and abundance of these water-bearing phases, and their geologic implications, is limited by spatial resolution of the available data. A revolutionary advance in understanding the inventory, diversity, and stratigraphy of these materials can be obtained from Mars orbit, using two complementary approaches: hyperspectral imaging at ~6 meters per pixel at 0.7–4 µm, and 1 meter-per-pixel imaging at selected VSWIR wavelengths from 0.4–1.7 µm.

Bulletin of the AAS↗
USGS2014

EAARL-B submerged topography: Barnegat Bay, New Jersey, pre-Hurricane Sandy, 2012

These remotely sensed, geographically referenced elevation measurements of lidar-derived submerged topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for part of Barnegat Bay, New Jersey, acquired pre-Hurricane Sandy on October 18, 22, 23, and 26, 2012. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed originally in a NASA-USGS collaboration. The exploration and processing of lidar data in an interactive or batch mode is supported using ALPS. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. The Airborne Lidar Processing System (ALPS) is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site.

New Jersey↗
USGS2014

EAARL-B coastal topography: Fire Island, New York, pre-Hurricane Sandy, 2012: seamless (bare earth and submerged)

These remotely sensed, geographically referenced elevation measurements of lidar-derived seamless (bare-earth and submerged) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for part of Fire Island, New York, acquired pre-Hurricane Sandy on October 27, 2012. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed originally in a NASA-USGS collaboration. The exploration and processing of lidar data in an interactive or batch mode is supported using ALPS. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. The Airborne Lidar Processing System (ALPS) is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site.

New York↗
USGS2011

Improving stream studies with a small-footprint green lidar

Technology is changing how scientists and natural resource managers describe and study streams and rivers. A new generation of airborne aquatic-terrestrial lidars is being developed that can penetrate water and map the submerged topography inside a stream as well as the adjacent subaerial terrain and vegetation in one integrated mission. A leading example of these new cross-environment instruments is the Experimental Advanced Airborne Research Lidar (EAARL), a NASAbuilt sensor now operated by the U.S. Geological Survey (USGS) [Wright and Brock, 2002].

Eos, Transactions, American Geophysical Union↗
USGS2022

Drought and water management in ancient Maya society

Paleoclimate research in the Maya region of Mesoamerica provides compelling evidence of drought during key periods of cultural transition in Maya society. These include the transition from the Preclassic to the Classic, and from Classic to the Postclassic. Previous research emphasized a causal relationship between drought and cultural change, or so-called “collapse” in the Maya region. Recent advances in the range and precision of climate-sensitive proxies and the development of new archives have enabled quantitative reconstructions of past hydroclimate, as well as providing evidence of high impact, short-duration events, such as tropical cyclones. Simultaneously, archaeological research has unearthed widespread evidence of technologies used by the Maya to exert control over water resources in urban, rural, and agricultural settings. Evidence suggests that many of these water features were in use for multiple generations, possibly centuries, and many were constructed during the Terminal Preclassic and Terminal Classic periods. We suggest that, given the availability of new archaeological and paleoclimate records, these data can be combined to identify the full complexity of Maya adaptation to hydroclimate variability to emphasize adaptation and resilience to both water scarcity and over-abundance (e.g., flooding). Such syntheses, which can offer lessons for present-day efforts to grapple with regional climate change, will benefit from additional studies in data-poor zones of the Maya region, as well as public archiving of paleoclimate and archaeological data.

Progress in Physical Geography: Earth and Environm↗
USGS2012

Streamflow depletion by wells--Understanding and managing the effects of groundwater pumping on streamflow

Groundwater is an important source of water for many human needs, including public supply, agriculture, and industry. With the development of any natural resource, however, adverse consequences may be associated with its use. One of the primary concerns related to the development of groundwater resources is the effect of groundwater pumping on streamflow. Groundwater and surface-water systems are connected, and groundwater discharge is often a substantial component of the total flow of a stream. Groundwater pumping reduces the amount of groundwater that flows to streams and, in some cases, can draw streamflow into the underlying groundwater system. Streamflow reductions (or depletions) caused by pumping have become an important water-resource management issue because of the negative impacts that reduced flows can have on aquatic ecosystems, the availability of surface water, and the quality and aesthetic value of streams and rivers. Scientific research over the past seven decades has made important contributions to the basic understanding of the processes and factors that affect streamflow depletion by wells. Moreover, advances in methods for simulating groundwater systems with computer models provide powerful tools for estimating the rates, locations, and timing of streamflow depletion in response to groundwater pumping and for evaluating alternative approaches for managing streamflow depletion. The primary objective of this report is to summarize these scientific insights and to describe the various field methods and modeling approaches that can be used to understand and manage streamflow depletion. A secondary objective is to highlight several misconceptions concerning streamflow depletion and to explain why these misconceptions are incorrect.

Circular↗
USGS2014

Brine contamination to aquatic resources from oil and gas development in the Williston Basin, United States

The Williston Basin, which includes parts of Montana, North Dakota, and South Dakota in the United States and the provinces of Manitoba and Saskatchewan in Canada, has been a leading domestic oil and gas producing region for more than one-half a century. Currently, there are renewed efforts to develop oil and gas resources from deep geologic formations, spurred by advances in recovery technologies and economic incentives associated with the price of oil. Domestic oil and gas production has many economic benefits and provides a means for the United States to fulfill a part of domestic energy demands; however, environmental hazards can be associated with this type of energy production in the Williston Basin, particularly to aquatic resources (surface water and shallow groundwater) by extremely saline water, or brine, which is produced with oil and gas. The primary source of concern is the migration of brine from buried reserve pits that were used to store produced water during recovery operations; however, there also are considerable risks of brine release from pipeline failures, poor infrastructure construction, and flow-back water from hydraulic fracturing associated with modern oilfield operations. During 2008, a multidisciplinary (biology, geology, water) team of U.S. Geological Survey researchers was assembled to investigate potential energy production effects in the Williston Basin. Researchers from the U.S. Geological Survey participated in field tours and met with representatives from county, State, tribal, and Federal agencies to identify information needs and focus research objectives. Common questions from agency personnel, especially those from the U.S. Fish and Wildlife Service, were “are the brine plumes (plumes of brine-contaminated groundwater) from abandoned oil wells affecting wetlands on Waterfowl Production Areas and National Wildlife Refuges?” and “are newer wells related to Bakken and Three Forks development different than the older, abandoned wells (in terms of potential for affecting aquatic resources)?” Of special concern were the wetland habitats of the ecologically important Prairie Pothole Region, which overlays a part of the Williston Basin and is recognized for the production of a majority of North America’s migratory waterfowl. On the basis of the concerns raised by on-the-ground land managers, as well as findings from previous research, a comprehensive study was developed with the following goals: summarize existing information pertaining to oil and gas production and aquatic resources in the Williston Basin; assess brine plume migration from new and previously studied sites in the Prairie Pothole Region; perform a regional, spatial evaluation of oil and gas production activities and aquatic resources; assess the potential for brine contamination to wetlands and streams; and hold a decision analysis workshop with key stakeholders to discuss issues pertaining to oil and gas production and environmental effects and to identify information gaps and research needs. This report represents an initial, multidisciplinary evaluation of measured and potential environmental effects associated with oil and gas production in the Williston Basin and Prairie Pothole Region. Throughout this report there are reviews of current knowledge, and discussions relating to data gaps and research needs. On the basis of the information presented, future research needs include: regional geophysical and water-quality assessments to establish baselines for current conditions and estimate the extent of previous brine contamination, investigations into the direct effects of brine to biotic communities, and evaluations to identify the most effective techniques to mitigate brine contamination.

Montana, North Dakota↗
USGS2018

Landsat benefiting society for fifty years

Since 1972, data acquired by the Landsat series of satellites have become integral to land management for both government and the private sector, providing scientists and decision makers with key information about agricultural productivity, ice sheet dynamics, urban growth, forest monitoring, natural resource management, water quality, and supporting disaster response. Landsat 9 continues the mission of unrivaled space-based Earth observation and will lead the Landsat program into its second half century of Earth imagery provided to users, worldwide, at no charge. More than 8 million Landsat scenes held in the USGS archive to date are used in conjunction with advanced geographic information systems, image processing software, and cloud computing capabilities to enable Landsat users to study changes on the Earth’s surface across continental regions and extended time periods. The Operational Land Imager 2 (OLI-2) and the Thermal Infrared Sensor 2 (TIRS-2) instruments onboard Landsat 9 —which replicate the technologically-advanced instruments introduced onboard Landsat 8—allow for the collection of continuous high-quality data required for advancing Earth applications, including our ability to map surface temperature and surface water quality. Landsat 9 will build on the Landsat legacy, achieving a half-century record of global Earth observations.

Report↗
USGS2026

Multireservoir allocation framework considering societal and ecological needs in a time-frequency domain

Existing reservoir management frameworks traditionally consider historical (predam) flow conditions to deliver environmental flows. Such frameworks may not be feasible because current demand and/or climate could be different from predam conditions. Hence, we developed a multireservoir framework that explicitly considers both human water demands and environmental flow requirements to minimize deviations under current hydroclimatic conditions and demand patterns. The multireservoir framework, Generalized Reservoir Analyses using Probabilistic Streamflow (GRAPS), was modified and implemented to solve the problem of minimizing the flow deviations using feasible sequential quadratic programming for three reservoirs in the Chattahoochee River Basin, Southeastern United States, which is known for its imperiled native biodiversity and productive estuarine ecosystem. Our results show that downstream reservoirs in the cascade system are less influenced by upstream reservoirs’ regulation because the downstream reservoirs receive a significant amount of natural flows. By comparing the average wavelet power spectrum at different periodicities between natural flows and downstream releases, we found that the current release policy and modified releases resulted in highly altered flows under shorter periodicities (e.g., less than 2 months) but synchronized flow variance between natural flow and downstream releases at longer periodicities (e.g., greater than 3 years). This framework of linking the multireservoir allocation model through the time–frequency analysis using wavelet power spectrum could not only advance sustainable water management policies to meet water for human and environmental needs but can also add additional value in meeting the downstream environmental demand at desired periodicities.

Alabama, Florida, Georgia↗
USGS1994

Airborne remote sensing for geology and the environment; present and future

In 1988, a group of leading experts from government, academia, and industry attended a workshop on airborne remote sensing sponsored by the U.S. Geological Survey (USGS) and hosted by the Branch of Geophysics. The purpose of the workshop was to examine the scientific rationale for airborne remote sensing in support of government earth science in the next decade. This report has arranged the six resulting working-group reports under two main headings: (1) Geologic Remote Sensing, for the reports on geologic mapping, mineral resources, and fossil fuels and geothermal resources; and (2) Environmental Remote Sensing, for the reports on environmental geology, geologic hazards, and water resources. The intent of the workshop was to provide an evaluation of demonstrated capabilities, their direct extensions, and possible future applications, and this was the organizational format used for the geologic remote sensing reports. The working groups in environmental remote sensing chose to present their reports in a somewhat modified version of this format. A final section examines future advances and limitations in the field. There is a large, complex, and often bewildering array of remote sensing data available. Early remote sensing studies were based on data collected from airborne platforms. Much of that technology was later extended to satellites. The original 80-m-resolution Landsat Multispectral Scanner System (MSS) has now been largely superseded by the 30-m-resolution Thematic Mapper (TM) system that has additional spectral channels. The French satellite SPOT provides higher spatial resolution for channels equivalent to MSS. Low-resolution (1 km) data are available from the National Oceanographic and Atmospheric Administration's AVHRR system, which acquires reflectance and day and night thermal data daily. Several experimental satellites have acquired limited data, and there are extensive plans for future satellites including those of Japan (JERS), Europe (ESA), Canada (Radarsat), and the United States (EOS). There are currently two national airborne remote sensing programs (photography, radar) with data archived at the USGS' EROS Data Center. Airborne broadband multispectral data (comparable to Landsat MSS and TM but involving several more channels) for limited geographic areas also are available for digital processing and analysis. Narrow-band imaging spectrometer data are available for some NASA experiment sites and can be acquired for other locations commercially. Remote sensing data and derivative images, because of the uniform spatial coverage, availability at different resolutions, and digital format, are becoming important data sets for geographic information system (GIS) analyses. Examples range from overlaying digitized geologic maps on remote sensing images and draping these over topography, to maps of mineral distribution and inferred abundance. A large variety of remote sensing data sets are available, with costs ranging from a few dollars per square mile for satellite digital data to a few hundred dollars per square mile for airborne imaging spectrometry. Computer processing and analysis costs routinely surpass these expenses because of the equipment and expertise necessary for information extraction and interpretation. Effective use requires both an understanding of the current methodology and an appreciation of the most cost-effective solution.

Bulletin↗
USGS2023

Assessment of habitat use by juvenile Chinook salmon (Oncorhynchus tshawytscha) in the Willamette River Basin, 2020–21

We conducted a field study during 2020–21 to describe habitat use patterns of juvenile Chinook salmon ( Oncorhynchus tshawytscha ) in the mainstem Willamette, McKenzie, and Santiam Rivers and to evaluate how habitat suitability criteria affected the predictive accuracy of a hydraulic habitat model. Two approaches were used to collect habitat use data: a stratified sampling design was used to ensure that a representative sample of available habitats was included in our sampling; and a targeted sampling design was used to collect additional data in habitat cells where juvenile Chinook salmon were observed. Habitat attributes and fish presence data were collected in habitat cells that were approximately 2 square meters during April, June, and July. A total of 632 cells were sampled during the study and included habitat located in the main channel (373 cells), side channels (228 cells), and in alcoves (31 cells). Juvenile Chinook salmon were observed in 42 percent of the cells located in the main channel, 38 percent of the cells located in side channels, and 7 percent of the cells located in alcoves. We used logistic regression to develop resource selection functions for April, June, and July, which produced probability-based predictions of habitat use for juvenile Chinook salmon based on water velocity and water depth. The resource selection functions revealed a habitat shift by juvenile Chinook salmon to locations with higher water velocities and greater water depths from April to July as juvenile Chinook salmon size increased. The resource selection functions that we developed are an important addition to habitat modeling in the Willamette River basin because they were developed from in-basin data, capture seasonal differences in habitat use, and facilitate probability-based estimates of habitat use for juvenile Chinook salmon. These advancements will improve habitat modeling efforts for juvenile Chinook salmon during spring and summer months within the Willamette River.

Oregon↗
USGS2018

Conceptual model to assess water use associated with the life cycle of unconventional oil and gas development

As the demand for energy increases in the United States, so does the demand for water used to produce many forms of that energy. Technological advances, limited access to conventional oil and gas accumulations, and the rise of oil and gas prices resulted in increased development of unconventional oil and gas (UOG) accumulations. Unconventional oil and gas is developed using a method that combines directional drilling and hydraulic fracturing techniques, allowing for greater oil and gas production from previously unrecoverable reservoirs. Quantification of the water resources required for UOG development and production is difficult because of disparate data sources, variable reporting requirements across boundaries (local, State, and national), and incomplete or proprietary datasets. A topical study was started in 2015 under the U.S. Geological Survey’s Water Availability and Use Science Program, as part of the directive in the Secure Water Act for the U.S. Geological Survey to conduct a National Water Census, to better understand the relation between production of UOG resources for energy and the amount of water needed to produce and sustain this type of energy development in the United States. The Water Availability and Use Science Program goal for this topical study is to develop and apply a statistical model to better estimate the water use associated with UOG development, regardless of the location and target geologic formation. As a first step, a conceptual model has been developed to characterize the life cycle of water use in areas of UOG development. Categories of water use and the way water-use data are collected might change over time; therefore, a generic approach was used in developing the conceptual model to allow for greater flexibility in adapting to future changes or newly available data. UOG development can be summarized into four stages: predrilling construction, drilling, hydraulic fracturing, and ongoing production. The water used in UOG production can be categorized further as direct, indirect, or ancillary water use. Direct water use is defined as the water used for drilling and hydraulic fracturing a well and for maintaining the well during ongoing production. Indirect water use is defined as the water used at or near a well pad. The water used for dust abatement also is considered an indirect use but may be applied away from the well pad. Ancillary water use is defined as the additional local or regional water use resulting from a change (for example, population) directly related to UOG development throughout the life cycle that is not used directly in the well or indirectly for any other purpose at the well pad. The conceptual model presented in this report consists of five elements: (1) input data, (2) processes, (3) decisions, (4) output data, and (5) outcomes. The input data requirements for estimating water use associated with UOG development are somewhat onerous, and obtaining suitable datasets can be challenging because local, State, and Federal agencies do not collect data similarly. The quality of a water-use assessment that uses the conceptual model presented in this report is dependent on the quality and quantity of data that are available for a UOG play. The conceptual model can be used for an assessment with sparse data; however, having sparse data likely will result in greater uncertainty in the water-use estimates. The conceptual model presented in this report is designed to be robust to characterize and simulate the data processing to estimate water use associated with UOG development. Although the results of an analysis that includes missing data have greater uncertainty, the analysis still can be insightful because it can establish a baseline estimate of UOG water use that may be refined further as more data become available. Analysis of models that include missing data also could aid in identifying the data most needed for future water-use estimates. Characterizing individual model limitations is important because the conceptual model can be used in future water-use studies to facilitate data compiling, data processing, estimating, and assessing UOG activities regardless of location.

Scientific Investigations Report↗
USGS2023

Development of small uncrewed aerial systems for multi-instrument geophysical data acquisition in active geothermal systems

Small Uncrewed Aerial Systems (sUAS) serve as critical platforms for geophysical data collection at an intermediate scale between lower resolution, regional datasets collected via crewed aerial surveys, and high resolution, but spatially sparse sampling of ground-based data collection methods. Advances in sensor design and sUAS capabilities have led to rapid advances in the amount and type of geophysical data that can be acquired using sUAS-based survey designs (Gavazzi et al., 2019). Here we showcase the utility of a single sUAS (the Matrice 600 Pro and accompanying sensor package) that collects magnetic, thermal infra-red (TIR) and gas (CO2, SO2, H2S, water vapor) data for use in geothermal resource exploration and monitoring, with case studies in eastern California and Iceland. The work highlights the flexibility of modern sUAS systems for single-team acquisition of multiple independent but coupled geophysical data which allow for a multidisciplinary approach to geothermal systems research. We summarize the workflows involved in collecting each dataset as well as several common issues encountered both during data collection and data processing.

Conference Paper↗
USGS2013

EAARL coastal topography and imagery–Western Louisiana, post-Hurricane Rita, 2005: First surface

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived first-surface (FS) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, Virginia. This project provides highly detailed and accurate datasets of a portion of the Louisiana coastline beachface, acquired post-Hurricane Rita on September 27-28 and October 2, 2005. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the National Aeronautics and Space Administration (NASA) Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Website.

Louisiana↗
USGS2010

EAARL coastal topography-western Florida, post-Hurricane Charley, 2004: seamless (bare earth and submerged.

Project Description These remotely sensed, geographically referenced elevation measurements of lidar-derived seamless (bare-earth and submerged) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Coastal and Marine Geology Program (CMGP), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the western Florida coastline beachface, acquired post-Hurricane Charley on August 17 and 18, 2004. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website. Selected References Brock, J.C., Wright, C.W., Sallenger, A.H., Krabill, W.B., and Swift, R.N., 2002, Basis and methods of NASA airborne topographic mapper Lidar surveys for coastal studies: Journal of Coastal Research, v. 18, no. 1, p. 1-13. Crane, Michael, Clayton, Tonya, Raabe, Ellen, Stoker, Jason, Handley, Larry, Bawden, Gerald, Morgan, Karen, and Queija, Vivian, 2004, Report of the U.S. Geological Survey Lidar workshop sponsored by the Land Remote Sensing Program and held in St. Petersburg, FL, November 2002: U.S. Geological Survey Open-File Report 2004-1456, 72 p. Nayegandhi, Amar, Brock, J.C., and Wright, C.W., 2009, Small-footprint, waveform-resolving Lidar estimation of submerged and sub-canopy topography in coastal environments: International Journal of Remote Sensing, v. 30, no. 4, p. 861-878. Sallenger, A.H., Wright, C.W., and Lillycrop, Jeff, 2005, Coastal impacts of the 2004 hurricanes measured with airborne Lidar; initial results: Shore and Beach, v. 73, nos. 2-3, p. 10-14. Resources Included Readme.txt File

Data Series↗
USGS2011

Multicomponent seismic methods for characterizing gas hydrate occurrences and systems in deep-water Gulf of Mexico

In-situ characterization and quantification of natural gas hydrate occurrences remain critical research directions, whether for energy resource, drilling hazard, or climate-related studies. Marine multicomponent seismic data provide the full seismic wavefield including partial redundancy, and provide a promising set of approaches for gas hydrate characterization. Numerous authors have demonstrated the possibilities of multicomponent data at study sites around the world. We expand on this work by investigating the utility of very densely spaced (10’s of meters) multicomponent receivers (ocean-bottom cables, OBC, or ocean-bottom seismometers, OBS) for gas hydrate studies in the Gulf of Mexico and elsewhere. Advanced processing techniques provide high-resolution compressional-wave (PP) and converted shearwave (PS) reflection images of shallow stratigraphy, as well as P-wave and S-wave velocity estimates at each receiver position. Reflection impedance estimates can help constrain velocity and density, and thus gas hydrate saturation. Further constraint on velocity can be determined through identification of the critical angle and associated phase reversal in both PP and PS wideangle data. We demonstrate these concepts with examples from OBC data from the northeast Green Canyon area and numerically simulated OBS data that are based on properties of known gas hydrate occurrences in the southeast (deeper water) Green Canyon area. These multicomponent data capabilities can provide a wealth of characterization and quantification information that is difficult to obtain with other geophysical methods.

Green Canyon, Gulf of Mexico↗
USGS2015

Predicting the resilience and recovery of aquatic systems: a framework for model evolution within environmental observatories

Maintaining the health of aquatic systems is an essential component of sustainable catchmentmanagement, however, degradation of water quality and aquatic habitat continues to challenge scientistsand policy-makers. To support management and restoration efforts aquatic system models are requiredthat are able to capture the often complex trajectories that these systems display in response to multiplestressors. This paper explores the abilities and limitations of current model approaches in meeting this chal-lenge, and outlines a strategy based on integration of flexible model libraries and data from observationnetworks, within a learning framework, as a means to improve the accuracy and scope of model predictions.The framework is comprised of a data assimilation component that utilizes diverse data streams from sensornetworks, and a second component whereby model structural evolution can occur once the model isassessed against theoretically relevant metrics of system function. Given the scale and transdisciplinarynature of the prediction challenge, network science initiatives are identified as a means to develop and inte-grate diverse model libraries and workflows, and to obtain consensus on diagnostic approaches to modelassessment that can guide model adaptation. We outline how such a framework can help us explore thetheory of how aquatic systems respond to change by bridging bottom-up and top-down lines of enquiry,and, in doing so, also advance the role of prediction in aquatic ecosystem management.

Water Resources Research↗
USGS2021

The application of metacommunity theory to the management of riverine ecosystems

River managers strive to use the best available science to sustain biodiversity and ecosystem function. To achieve this goal requires consideration of processes at different scales. Metacommunity theory describes how multiple species from different communities potentially interact with local-scale environmental drivers to influence population dynamics and community structure. However, this body of knowledge has only rarely been used to inform management practices for river ecosystems. In this article, we present a conceptual model outlining how the metacommunity processes of local niche sorting and dispersal can influence the outcomes of management interventions and provide a series of specific recommendations for applying these ideas as well as research needs. In all cases, we identify situations where traditional approaches to riverine management could be enhanced by incorporating an understanding of metacommunity dynamics. A common theme is developing guidelines for assessing the metacommunity context of a site or region, evaluating how that context may affect the desired outcome, and incorporating that understanding into the planning process and methods used. To maximize the effectiveness of management activities, scientists, and resource managers should update the toolbox of approaches to riverine management to reflect theoretical advances in metacommunity ecology.

WIREs Water↗