USGS ScienceSearch

SEARCH · USGS Science

Results for “Special Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources

Map showing general availability of ground water in the Salina quadrangle, Utah

The general availability of ground water was determined from well records collected by the U.S. Geological Survey and cooperating State, local, and Federal agencies. Data are for aquifers that in most places are less than 1,000 feet below the land surface. In areas of few or no wells, potential well yields are inferred from geologic data. Special investigations are needed to determine specific factors such as depths and sustained yields of aquifers, water levels, and suitability of water for use in any given area. More detailed information about principal aquifers for specific parts of the map area are obtainable from the district office of the Water Resources Division, U.S. Geological Survey, Salt Lake City, Utah.

Utah

The emerging role of lidar remote sensing in coastal research and resource management

Knowledge of coastal elevation is an essential requirement for resource management and scientific research. Recognizing the vast potential of lidar remote sensing in coastal studies, this Special Issue includes a collection of articles intended to represent the state-of-the-art for lidar investigations of nearshore submerged and emergent ecosystems, coastal morphodynamics, and hazards due to sea-level rise and severe storms. Some current applications for lidar remote sensing described in this Special Issue include bluegreen wavelength lidar used for submarine coastal benthic environments such as coral reef ecosystems, airborne lidar used for shoreline mapping and coastal change detection, and temporal waveform-resolving lidar used for vegetation mapping.

Journal of Coastal Research

Progress report on the Worldwide Earthquake Risk Management (WWERM) Program

Considerable progress has been made in the Worldwide Earthquake Risk Management (WWERM) Program since its initiation in late 1989 as a cooperative program of the Agency for International Development (AID), Office of U.S. Foreign Disaster Assistance (OFDA), and the U.S. Geological Survey. Probabilistic peak acceleration and peak Modified Mercalli intensity (MMI) maps have been prepared for Chile and for Sulawesi province in Indonesia. Earthquake risk (loss) studies for dwellings in Gorontalo, North Sulawesi, have been completed and risk studies for dwellings in selected areas of central Chile are underway. A special study of the effect of site response on earthquake ground motion estimation in central Chile has also been completed and indicates that site response may modify the ground shaking by as much as plus or minus two units of MMI. A program for the development of national probabilistic ground motion maps for the Philippines is now underway and pilot studies of earthquake ground motion and risk are being planned for Morocco.

Conference Paper

Historical development of the gravity method in exploration

The gravity method was the first geophysical technique to be used in oil and gas exploration. Despite being eclipsed by seismology, it has continued to be an important and sometimes crucial constraint in a number of exploration areas. In oil exploration the gravity method is particularly applicable in salt provinces, overthrust and foothills belts, underexplored basins, and targets of interest that underlie high-velocity zones. The gravity method is used frequently in mining applications to map subsurface geology and to directly calculate ore reserves for some massive sulfide orebodies. There is also a modest increase in the use of gravity techniques in specialized investigations for shallow targets. Gravimeters have undergone continuous improvement during the past 25 years, particularly in their ability to function in a dynamic environment. This and the advent of global positioning systems (GPS) have led to a marked improvement in the quality of marine gravity and have transformed airborne gravity from a regional technique to a prospect-level exploration tool that is particularly applicable in remote areas or transition zones that are otherwise inaccessible. Recently, moving-platform gravity gradiometers have become available and promise to play an important role in future exploration. Data reduction, filtering, and visualization, together with low-cost, powerful personal computers and color graphics, have transformed the interpretation of gravity data. The state of the art is illustrated with three case histories: 3D modeling of gravity data to map aquifers in the Albuquerque Basin, the use of marine gravity gradiometry combined with 3D seismic data to map salt keels in the Gulf of Mexico, and the use of airborne gravity gradiometry in exploration for kimberlites in Canada.

Geophysics

Appalachian piedmont regolith: Relations of saprolite and residual soils to rock-type

Saprolite is a major product of rock weathering on the Appalachian Piedmont from New Jersey to Alabama. On the Piedmont, it is the primary substrate from which residual soils are developed. Properties of saprolite and residual soils are highly related to their parent rocks. Studies of cores and outcrops illustrate that rock structure and mineralogy control upland regolith zonation. Saprolite develops by in situ chemical alteration of a wide variety of mafic to highly silicic rocks. Thickness of upland saprolite varies from a few meters on mafic rocks to tens of meters on silicic rocks. Saprolite thickness decreases with increasing slope and saprolite is generally thin or absent in valley bottoms. Massive residual subsoils and soils develop by physical and chemical processes that alter the upper few meters of saprolite. The fabric, texture and mineralogy of residual soils are distinctly different from underlying saprolite. The boundary between soil and saprolite is often gradual, and often a zone of low permeability. Geologic maps are useful guides to Piedmont regolith thickness and zonation. In regional design studies, geologic maps and regolith characteristics can be useful in environmental decision-making.

Geotechnical Special Publication

Distribution of fishes in U. S. streams tributary to Lake Superior

Experimental sea lamprey control by the Bureau of Commercial Fisheries on Lake Superior streams provided many new distributional records of the fish fauna. Seventy-one species were recorded from 175 streams. Specimens were collected at the electromechanical barriers, with electric shockers, with fyke nets, and during chemical treatment of streams. Maps showing stream records of each species are presented.

Special Scientific Report - Fisheries

Seafloor habitat mapping and classification in Glacier Bay, Alaska: Phase 1 & 2 1996-2004

Glacier Bay is a diverse fjord ecosystem with multiple sills, numerous tidewater glaciers and a highly complex oceanographic system. The Bay was completely glaciated prior to the 1700’s and subsequently experienced the fastest glacial retreat recorded in historical times. Currently, some of the highest sedimentation rates ever observed occur in the Bay, along with rapid uplift (up to 2.5 cm/year) due to a combination of plate tectonics and isostatic rebound. Glacier Bay is the second deepest fjord in Alaska, with depths over 500 meters. This variety of physical processes and bathymetry creates many diverse habitats within a relatively small area (1,255 km 2 ). Habitat can be defined as the locality, including resources and environmental conditions, occupied by a species or population of organisms (Morrison et al 1992). Mapping and characterization of benthic habitat is crucial to an understanding of marine species and can serve a variety of purposes including: understanding species distributions and improving stock assessments, designing special management areas and marine protected areas, monitoring and protecting important habitats, and assessing habitat change due to natural or human impacts. In 1996, Congress recognized the importance of understanding benthic habitat for fisheries management by reauthorizing the Magnuson-Stevens Fishery Conservation and Management Act and amending it with the Sustainable Fisheries Act (SFA). This amendment emphasizes the importance of habitat protection to healthy fisheries and requires identification of essential fish habitat in management decisions. Recently, the National Park Service’s Ocean Stewardship Strategy identified the creation of benthic habitat maps and sediment maps as crucial components to complete basic ocean park resource inventories (Davis 2003). Glacier Bay National Park managers currently have very limited knowledge about the bathymetry, sediment types, and various marine habitats of ecological importance in the Park. Ocean floor bathymetry and sediment type are the building blocks of marine communities. Bottom type and shape affects the kinds of benthic communities that develop in a particular environment as well as the oceanographic conditions that communities are subject to. Accurate mapping of the ocean floor is essential for park manager’s understanding of existing marine communities and will be important in assessing human induced changes (e.g., vessel traffic and commercial fishing), biological change (e.g., rapid sea otter recolonization), and geological processes of change (e.g., deglaciation). Information on animal-habitat relationships, particularly within a marine reserve framework, will be valuable to agencies making decisions about critical habitats, marine reserve design, as well as fishery management. Identification and mapping of benthic habitat provides National Park Service mangers with tools to increase the effectiveness of resource management. The primary objective of this project is to investigate the geological characteristics of the biological habitats of halibut, Dungeness crab, king crab, and Tanner crab within Glacier Bay National Park. Additionally, habitat classification of shallow water regions of Glacier Bay will provide crucial information on the relationship between benthic habitat features and the abundance of benthic prey items for a variety of marine predators, including sea ducks, the rapidly increasing population of sea otters, and other marine mammals.

Alaska

Digital mapping of the Mars Pathfinder landing site: Design, acquisition, and derivation of cartographic products for science applications

The Imager for Mars Pathfinder (IMP) acquired more than 16,000 images and provided panoramic views of the surface of Mars at the Mars Pathfinder landing site in Ares Vallis. This paper describes the stereoscopic, multispectral IMP imaging sequences and focuses on their use for digital mapping of the landing site and for deriving cartographic products to support science applications of these data. Two‐dimensional cartographic processing of IMP data, as performed via techniques and specialized software developed for ISIS (the U.S. Geological Survey image processing software package), is emphasized. Cartographic processing of IMP data includes ingestion, radiometric correction, establishment of geometric control, coregistration of multiple bands, reprojection, and mosaicking. Photogrammetric processing, an integral part of this cartographic work which utilizes the three‐dimensional character of the IMP data, supplements standard processing with geometric control and topographic information [ Kirk et al. , this issue]. Both cartographic and photogrammetric processing are required for producing seamless image mosaics and for coregistering the multispectral IMP data. Final, controlled IMP cartographic products include spectral cubes, panoramic (360° azimuthal coverage) and planimetric (top view) maps, and topographic data, to be archived on four CD‐ROM volumes. Uncontrolled and semicontrolled versions of these products were used to support geologic characterization of the landing site during the nominal and extended missions. Controlled products have allowed determination of the topography of the landing site and environs out to ∼60 m, and these data have been used to unravel the history of large‐ and small‐scale geologic processes which shaped the observed landing site. We conclude by summarizing several lessons learned from cartographic processing of IMP data.

Journal of Geophysical Research E: Planets

Sources of geologic and hydrologic information pertinent to ground-water resources in Rhode Island

This report summarizes sources of geologic and hydrologic information useful to water managers and others involved in the investigation, appraisal, development, and protection of ground-water resources in Rhode Island. The geographic scope of the report includes Rhode Island and small adjoining areas of Massachusetts and Connecticut, where drainage basins are shared with these States. The information summarized is found in maps and reports prepared by the U.S. Geological Survey and published by either the U.S. Geological Survey or by the State of Rhode Island. Information sources are presented in maps and tables. Reference maps show drainage divides, town lines, and the 7.5-minute grid of latitude and longitude for the State. Maps show availability of surficial geologic maps, bedrock geologic maps, and ground-water studies by 7.5-minute quadrangle, and show availability of ground-water studies by drainage basin, subbasin, and special study area. Sources of geologic and hydrologic information for the thirty-seven 7.5-minute quadrangles covering Rhode Island have been compiled based on the following information categories: surficial geology, bedrock geology, subsurface materials, altitude of bedrock surface, water-table altitudes, water-table contours, saturated thickness, hydraulic conductivity, transmissivity, drainage divides, recharge areas, ground-water reservoirs, induced infiltration, and ground-water quality. A table for each of the 37 quadrangles lists the major categories of information available for that quadrangle, provides references to the publications in which the information can be found, and indicates the format, scale, and other pertinent attributes of the information. A table organized by report series gives full citations for publications prepared by the U.S. Geological Survey pertaining to the geology and hydrology of Rhode Island. To facilitate location of information for particular municipalities, a table lists cities and towns in the State and the quadrangles that cover each municipality.

Rhode Island

Mapping from space

Remote sensing of the earth promises to become an operational tool of the engineer and the scientist within the next few years. There are no real technical limits on the uses of data from space sensors. However, it is not practical to fly special missions, particularly in space, for each specific use. General-purpose, earth-sensing missions aimed at meeting a wide variety of requirements must be defined. Engineers must help define earth-sensing missions, based on the concepts of repetitive coverage, multispectral response, and spatial correlation.

Journal of the Surveying and Mapping Division

Overcoming the momentum of anachronism: American geologic mapping in a twenty-first-century world

The practice of geologic mapping is undergoing conceptual and methodological transformation. Profound changes in digital technology in the past 10 yr have potential to impact all aspects of geologic mapping. The future of geologic mapping as a relevant scientific enterprise depends on widespread adoption of new technology and ideas about the collection, meaning, and utility of geologic map data. It is critical that the geologic community redefine the primary elements of the traditional paper geologic map and improve the integration of the practice of making maps in the field and office with the new ways to record, manage, share, and visualize their underlying data. A modern digital geologic mapping model will enhance scientific discovery, meet elevated expectations of modern geologic map users, and accommodate inevitable future changes in technology.

GSA Special Papers

Karst mapping in the United States: Past, present and future

The earliest known comprehensive karst map of the entire USA was published by Stringfield and LeGrand (1969), based on compilations of William E. Davies of the U.S. Geological Survey (USGS). Various versions of essentially the same map have been published since. The USGS recently published new digital maps and databases depicting the extent of known karst, potential karst, and pseudokarst areas of the United States of America including Puerto Rico and the U.S. Virgin Islands (Weary and Doctor, 2014). These maps are based primarily on the extent of potentially karstic soluble rock types, and rocks with physical properties conducive to the formation of pseudokarst features. These data were compiled and refined from multiple sources at various spatial resolutions, mostly as digital data supplied by state geological surveys. The database includes polygons delineating areas with potential for karst and that are tagged with attributes intended to facilitate classification of karst regions. Approximately 18% of the surface of the fifty United States is underlain by significantly soluble bedrock. In the eastern United States the extent of outcrop of soluble rocks provides a good first-approximation of the distribution of karst and potential karst areas. In the arid western states, the extent of soluble rock outcrop tends to overestimate the extent of regions that might be considered as karst under current climatic conditions, but the new dataset encompasses those regions nonetheless. This database will be revised as needed, and the present map will be updated as new information is incorporated.

GSA Special Papers

The breeding bird survey, 1966

A Breeding Bird Survey of a large section on North America was conducted during June 1966. Cooperators ran a total of 585 Survey routes in 26 eastern States and 4 Canadian Provinces. Future coverage of established routes will enable changes in the abundance of North American breeding birds to be measured. Routes are selected at random on the basis of one-degree blocks of latitude and longitude. Each 241/2-mile route, with 3-minute stops spaced one-half mile apart, is driven by automobile. All birds heard or seen at the stops are recorded on special forms and the data are then transferred to machine punch cards. The average number of birds per route is tabulated by State, along with the total number of each species and the percent of routes and stops upon which they were recorded. Maps are presented showing the range and abundance of selected species. Also, a year-to-year comparison is made of populations of selected species on Maryland routes in 1965 and 1966.

Special Scientific Report - Wildlife

Landsat 7 processing on the EROS Data Center's National Land Archive Processing System (NLAPS)

Staff at the U.S. Geological Survey (USGS) EROS Data Center (EDC) process Landsat 7 data for customer distribution on two distinct systems. The Distributed Active Archive Center (DAAC) processing is done on the Level -1 Product Generation System (LPGS), and the USGS processing is completed on the National Land Archive Processing System (NLAPS). The NLAPS is capable of processing data from Landsat 1-5 and 7 and SPOT 1-3. The data can be processed with correction levels ranging from Level-0 raw data to terrain-corrected precision products in a variety of output formats. The NLAPS processing system requires that different ordering procedures be used for standard recipe versus special order processing, and it makes available many processing and framing options. The NLAPS draws on a ground control point library whose sources range from paper maps to textual descriptions and registered source imagery, such as digital orthophoto quadrangles. The accuracy of the final products will vary depending on the level of correction applied and the source of the ground control points used for the precision corrections. An accuracy assessment of the LPGS systematic product versus the NLAPS systematic product demonstrates that both systems provide the same geometric and radiometric accuracy in systematically corrected products.

Conference Paper

Geological Survey published reports on Alaska, 1884-1914, indexed by quadrangle

Geological Survey reports published as Annual Reports, Monographs, Special Reports, Professional Papers, Bulletins, and Water Supply Papers are listed by the quadrangles (scale 1:250,000) into which Alaska has been divided for topographic mapping (p. 2). This index does not include any reports that deal solely with administrative matters. Reports that deal with Alaska as a whole or with areas that can not be identified with any specific quadrangle are listed under ALASKA - GENERAL, as are bibliographies, indexes, and similar publications. The ALASKAGENERAL list appears before the alphabetically arranged quadrangle listings.

Alaska

Paleotectonic investigations of the Pennsylvanian System in the United States, Part I: Introduction and regional analyses of the Pennsylvanian System

The Pennsylvanian is the fourth geologic system to be analyzed and synthesized by geologists of the U.S. Geological Survey in the form of a paleotectonic study covering the conterminous United States. Earlier investigations were of the Jurassic, Triassic, and Permian Systems. Results were published as Miscellaneous Geologic Investigation Maps I-175, I-300, and I-450 and in Professional Paper 515. The objective of these investigations is to provide in graphic form the factual basis for recognition of tectonic events of each system on a countrywide scale. The maps in this publication depict rock thickness, generalized lithology, ancient geography, and other regional relations of the Pennsylvanian System. Method of preparation of the maps, the stratigraphic limits of the map units, and various stratigraphic and structural features and their probable tectonic significance are discussed. Pennsylvanian data were largely compiled between 1961 and 196 by 16 geologists, including the late Harold R. Wanless, who covered the five eastern regions and contributed to several of the special studies. The areas of responsibility of the cooperating geologists are indicated in figure 1. Work in Kansas was done by Gary F. Stewart, of the Kansas Geological Survey. Results of this investigation are presented in three units. Part I comprises an introduction and 17 chapters, each describing and discussing one of the regions in which the conterminous United States was divided for purposes of study and mapping. Part II is a synthesis of Pennsylvanian history to accompany interpretive maps of the five divisions of the Pennsylvanian System treated in this publication; it also includes a series of chapters on depositional environments, climatic conditions, and economic products of the system. The final section of part II is devoted to an index of localities and sources used in construction of the principal maps of this publication. Part III consists of the plates on which are presented the major maps and sections.

Professional Paper

A geospatial knowledge graph prototype for national topographic mapping

Knowledge graphs are a form of database representation and handling that show the potential to better meet the challenges of data interoperability, semi-automated information reasoning, and information retrieval. Geospatial knowledge graphs (GKG) have at their core specialized forms of applied ontology that provide coherent spatial context to a domain of information including non-spatial attributes. This paper discusses research toward the development of a prototype GKG based on national topographic databases of geospatial feature instances, attributes, properties, metadata, and annotations. The challenges are to capture and represent geographic semantics inherent in the source data, to align such graph models with standards where possible, to test logical computations, and to visualize the data using a cartographic user interface. Data integration from outside sources was tested through SPARQL and GeoSPARQL queries. Called the MapKB, the approaches applied in this prototype use a number of software components to build a system architecture aligned with those objectives and are composed entirely of free and open-source software. The system and ontology design were validated through reasoning and competency questions. Technical aspects of the prototype software succeeded, but customization was found to be needed for user-based design.

International Archives of the Photogrammetry, Remo

Mapping the changing landscape of fish-related journals: Setting a course for successful communication of scientific information

In the last 25 years, the number and scope of fish-related journals have changed. New and existing journals are increasingly specialized. Journals that are read and cited are changing because of differential accessibility via electronic databases. In this review, we examine shifts in numbers and foci of existing fish-related journals. We ask how these fish-related metrics differ across type of application, ecological system, taxa, and discipline. Although many journals overlap to some extent in content, there are distinct groups of journals for authors to consider. By systematically reviewing the focus of an individual manuscript, comparing it to the suite of journals available and examining the audience for the manuscript, we believe that authors can make informed decisions about which journals are most suitable for their work. Our goal here is to help authors find relevant journals and deliver scientific publications to the appropriate readership.

Fisheries