SEARCH · USGS Science

Results for “Scientific Investigations Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources

USGS2011

Bedrock geologic map of the Seward Peninsula, Alaska, and accompanying conodont data

This 1:500,000-scale geologic map depicts the bedrock geology of Seward Peninsula, western Alaska, on the North American side of the Bering Strait. The map encompasses all of the Teller, Nome, Solomon, and Bendeleben 1:250,000-scale quadrangles, and parts of the Shishmaref, Kotzebue, Candle, and Norton Bay 1:250,000-scale quadrangles (sh. 1; sh. 2). The geologic map is presented on Sheet 1. The pamphlet includes an introductory text, detailed unit descriptions, tables of geochronologic data, and an appendix containing conodont (microfossil) data and a text explaining those data. Sheet 2 shows metamorphic and tectonic units, conodont color alteration indices, key metamorphic minerals, and locations of geochronology samples listed in the pamphlet. The map area covers 74,000 km 2 , an area slightly larger than West Virginia or Ireland.

Alaska↗

USGS2010

Land area change and fractional water maps in the Chenier Plain, Louisiana, following Hurricane Rita (2005)

In this study, we estimated the changes in land and water coverage of a 1,961-square-kilometer (km2) area in Louisiana's Chenier Plain. The study area is roughly centered on the Sabine National Wildlife Refuge, which was impacted by Hurricane Rita on September 24, 2005. The objective of this study is twofold: (1) to provide pre- and post-Hurricane Rita moderate-resolution (30-meter (m)) fractional water maps based upon multiple source images, and (2) to quantify land and water coverage changes due to Hurricane Rita.

Louisiana↗

USGS2019

Surficial materials of Massachusetts—A 1:24,000-scale geologic map database

The surficial materials geologic map database defines the distribution of nonlithified earth materials at the land surface in the 189 7.5-minute, 1:24,000-scale quadrangles that cover the Commonwealth of Massachusetts (index map). Across the State, these materials range in thickness from a few feet to more than 500 feet (ft). In some places, surficial materials are absent where bedrock is at the land surface. The geologic map database differentiates surficial materials of Quaternary age on the basis of their lithologic characteristics (such as grain size and sedimentary structures), constructional geomorphic features, stratigraphic relationships, and age. The mapped distribution of surficial materials defines the areas of exposed bedrock and the boundaries between glacial till, glacial stratified deposits, and overlying postglacial deposits at a 1:24,000-scale level of accuracy. Most of the surficial materials in Massachusetts are deposits of the last two continental ice sheets that covered all of New England in the latter part of the Pleistocene ice age. The glacial deposits are divided into two broad categories, glacial till and moraine deposits, and glacial stratified deposits. Widespread till deposits were laid down directly on bedrock or on semi-consolidated coastal plain strata by glacier ice. Tills in thick-till (>15 ft thick) drumlin landforms are found in all parts of the State. Areas of shallow bedrock contain thin discontinuous till deposits and numerous bedrock outcrops, and are located chiefly in rocky upland areas. Moraine deposits related to glacial ice lobes of the last ice sheet are located mostly in southeastern Massachusetts. Glacial stratified deposits are concentrated in valleys and lowland areas and were laid down by glacial meltwater in streams, lakes, and the sea in front of the retreating ice margin during the last deglaciation. Postglacial deposits, primarily flood-plain alluvium and swamp deposits, make up a lesser proportion of the unconsolidated materials. The geodatabase included with this report contains MapUnitPolys, MapUnitOverlayPolys, and OverlayPolys, which show the distribution of geologic units that cover the entire map area and are intended for use at quadrangle scale (1:24,000). These data layers can be clipped by quadrangle or by town boundary. Unlike the units in conventional geologic maps, the digitally defined MapUnitOverlayPolys are arranged in order according to superposition. The polygons for till and bedrock are on the bottom and are overlain by the succeeding stratified deposits; these materials are shown everywhere they occur, including beneath postglacial deposits such as swamp deposits, and also beneath water bodies. The postglacial deposits are on top because these materials overlie the other, older deposits. Instructions for using the digital files are included in the README file. A series of map figures in the pamphlet illustrates the stacking of geologic units in a portion of the Mount Toby quadrangle. The BaseMaps folder contains the 1:24,000-scale topographic base map images (1944–1977 editions) used for this compilation. This report supersedes U.S. Geological Survey Open-File Reports 2006-1260-A, -B, -C, -D, -E, -F, -G, and -I.

Massachusetts↗

USGS2019

Three-dimensional geologic map of the southern Carson Sink, Nevada, including the Fallon FORGE area

The three-dimensional (3–D) geologic map characterizes the subsurface in the southern Carson Sink region. We created the 3–D map by integrating the results from seismic-reflection, potential-field-geophysical, and lithologic well-logging investigations completed in and around the Fallon FORGE site as part of the U.S. Department of Energy Frontier Observatory for Research in Geothermal Energy (FORGE) initiative from 2015–2018. The FORGE initiative was part of an effort to develop the technologies, techniques, and knowledge needed to make enhanced geothermal systems a commercially viable electricity-generation option for the United States. Geologic units and structures mapped during the Fallon FORGE study, which particularly focused on the Mesozoic basement, were extrapolated to create the 3–D map of the southern Carson Sink area. The 3–D map area is 10 km wide along the east-west and north-south axes and extends 2.5 km below sea level, ~3.7 km below the land surface. Views of the map include horizontal and vertical sections and oblique perspective views from several angles. We describe the geologic units and structures and discuss the methods used to integrate the geologic and geophysical information in a 3–D geologic interpretation. We provide digital data for elements of the map, such as individual 3–D fault and stratigraphic surfaces and surface-fault traces. Input data are available from various data repositories through cited web links. A brief movie displaying the 3–D map is available at https://doi.org/10.3133/sim3437 .

Nevada↗

USGS2009

Terrestrial Ecosystems - Land Surface Forms of the Conterminous United States

As part of an effort to map terrestrial ecosystems, the U.S. Geological Survey has generated land surface form classes to be used in creating maps depicting standardized, terrestrial ecosystem models for the conterminous United States, using an ecosystems classification developed by NatureServe . A biophysical stratification approach, developed for South America and now being implemented globally, was used to model the ecosystem distributions. Since land surface forms strongly influence the differentiation and distribution of terrestrial ecosystems, they are one of the key input layers in this biophysical stratification. After extensive investigation into various land surface form mapping methodologies, the decision was made to use the methodology developed by the Missouri Resource Assessment Partnership (MoRAP). MoRAP made modifications to Hammond's land surface form classification, which allowed the use of 30-meter source data and a 1-km2 window for analyzing the data cell and its surrounding cells (neighborhood analysis). While Hammond's methodology was based on three topographic variables, slope, local relief, and profile type, MoRAP's methodology uses only slope and local relief. Using the MoRAP method, slope is classified as gently sloping when more than 50 percent of the area in a 1-km2 neighborhood has slope less than 8 percent, otherwise the area is considered moderately sloping. Local relief, which is the difference between the maximum and minimum elevation in a neighborhood, is classified into five groups: 0-15 m, 16-30 m, 31-90 m, 91-150 m, and >150 m. The land surface form classes are derived by combining slope and local relief to create eight landform classes: flat plains (gently sloping and local relief =< 15 m), smooth plains (gently sloping and 15 m < local relief =< 30 m), irregular plains (gently sloping and 30 m < local relief =< 90 m), escarpments (gently sloping and local relief > 90 m), low hills (not gently sloping and local relief =< 30 m), hills (not gently sloping and 30 m < local relief =< 90 m), breaks/foothills (not gently sloping and 90 m < local relief =< 150 m), and low mountains (not gently sloping and local relief > 150 m). However, in the USGS application of the MoRAP methodology, an additional local relief group was used (> 400 m) to capture additional local topographic variation. As a result, low mountains were redefined as not gently sloping and 151 m < local relief < 400 m, and a new land surface form class, high mountains/deep canyons, was identified as not gently sloping and local relief > 400 m. The final application of the MoRAP methodology was implemented using the USGS 30-meter National Elevation Dataset and an existing USGS slope dataset that had been derived by calculating the slope from the NED in Universal Transverse Mercator (UTM) coordinates in each UTM zone, and then combining all of the zones into a national dataset. This map shows a smoothed image of the nine land surface form classes based on MoRAP's methodology. Additional information about this map and any data developed for the ecosystems modeling of the conterminous United States is available online at http://rmgsc.cr.usgs.gov/ecosystems/.

Scientific Investigations Map↗

USGS2015

Bathymetry and capacity of Chambers Lake, Chester County, Pennsylvania

Introduction Chambers Lake is a manmade reservoir on Birch Run, a tributary to West Branch Brandywine Creek in Chester County, Pennsylvania. The lake was created in 1994 after the completion of Multi-Purpose Dam PA-436F (Hibernia Dam), which was built under the Watershed Protection & Flood Control Prevention Act (U.S. Soil Conservation Service, 1991). Hibernia dam is 1,700 feet upstream from the confluence of Birch Run with West Branch Brandywine Creek. The primary objectives for Hibernia Dam were to provide (1) flood control, (2) a supplemental source of water supply for the greater City of Coatesville public water system, and (3) recreational opportunities. The drainage basin of Chambers Lake encompasses approximately 4.5 square miles, and the lake covers a surface area of about 95 acres at normal pool, which is at an elevation of 579.2 feet above the North American Vertical Datum of 1988 (NAVD 88) [580.0 feet above the National Geodetic Vertical Datum of 1929 (NGVD 29)]. The crest of the auxiliary spillway of the dam is 586.6 feet above NAVD 88. The elevation of the auxiliary spillway is important to this investigation because this elevation defines the flood storage capacity of Chambers Lake. Water levels exceeding this elevation are routed through the auxiliary spillway and flow through adjoining woodland to Birch Run. The U.S. Geological Survey (USGS), in cooperation with Chester County Water Resources Authority (CCWRA) and the County of Chester, surveyed the bathymetry and selected above-water features of Chambers Lake in September 2014. The purpose of the survey was to develop an accurate representation of the surface of the bottom of Chambers Lake and to determine the stage area and reservoir-storage capacity relation as of September 2014. CCWRA is responsible for operation of the dam and water-supply reservoir. Since construction, CCWRA has used a stage–storage capacity relation developed from the original survey conducted in the 1990s to estimate the volume of water available for water supply and the available flood storage. The bathymetric mapping effort was initiated due to interest in potential changes in current (2014) storage capacity when compared to the stage–storage capacity relation developed during design. The generated bathymetric surface may serve as a baseline to which temporal changes in storage capacity, owing to sedimentation and other factors, can be compared. In addition, these data will improve the overall accuracy of the stage–storage capacity table that CCWRA uses for reservoir and flood management operations. This report describes the methods used to create a bathymetric map of Chambers Lake for the computation of reservoir storage capacity as of September 2014. The product is a bathymetric map and a table showing the storage capacity of the reservoir at 2-foot increments from minimum usable elevation up to full capacity at the crest of the auxiliary spillway.

Pennsylvania↗

USGS2021

Geologic map of the Athabasca Valles region, Mars

This 1:1,000,000-scale geologic map of the Athabasca Valles region of Mars places the best-preserved lavas on Mars into their geologic context. The map shows vigorous geologic activity in the most recent epoch of the geologic history of Mars, which is extremely unusual for the planet. In these atypically youthful terrains, the interpretations of geologic processes are exceptionally robust for planetary geologic mapping. The investigation relies heavily on images from the NASA Mars Reconnaissance Orbiter (MRO) High-Resolution Imaging Science Experiment (HiRISE) and Context (CTX) cameras, which have sub-meter and sub-decameter spatial resolution, respectively. Geospatial fidelity is provided by the photogrammetrically controlled 100-meter-per-pixel map base derived from Thermal Emission Imaging System (THEMIS) daytime infrared image data. The individual HiRISE and CTX images are available through the National Aeronautics and Space Administration (NASA) Planetary Data System Cartography and Imaging Sciences Node ( https://pds-imaging.jpl.nasa.gov/ ).

Scientific Investigations Map↗

USGS2009

Sedimentation survey of Lago Guerrero, Aguadilla, Puerto Rico, March 2006

Lago Guerrero is located in Aguadilla, northwestern Puerto Rico (fig. 1). The reservoir has a surface area of about 32,000 square meters and is excavated in Aymamon Limestone of Miocene age. This bedrock consists of chalk interbed-ded with solution-riddled hard limestone (Monroe, 1969). The reservoir was constructed in the 1930s as part of the Isabela Hydroelectric System to regulate flows to two hydroelectric plants-Central Isabel No. 2, at an elevation of about 110 meters above mean sea level, and Central Isabel No. 3, at about 55 meters above mean sea level. Hydroelectric power generation was discontinued during the early 1960s, although the exact date is unknown (Puerto Rico Electric Power Authority, written commun., 2007). The principal use of the reservoir since then has been to regulate flow to two public-supply water filtration plants and supply irrigation water for the Aguadilla area. Flow into the reservoir is derived from Lago Guajataca through a 26-kilometer-long Canal Principal de Diversion concrete canal (Puerto Rico Electric Power Authority, written commun., 2001). Additional inflow occurs on an incidental basis only during intensive rainfall from the immediate drainage area. The present Lago Guerrero drainage area is undetermined, due to the irregular and complex topography of the limestone terrain and anthropogenic modifications to the stormwater drainage system. Stormwater runoff, however, is presumed to be negligible compared to the almost constant inflow to the reservoir of about 59,300 cubic meters per day from Lago Guajataca (CSA Group, 2000). On March 9, 2006, the U.S. Geological Survey (USGS), Caribbean Water Science Center, in cooperation with the Puerto Rico Electric Power Authority (PREPA), conducted a bathymetric survey of Lago Guerrero to determine the storage capacity of the reservoir and sedimentation amount since a previous survey conducted on May 30, 2001. The March 2006 survey was made to develop a bathymetric map of the reservoir, establish baseline data for future reservoir capacity comparisons, and to estimate the average sedimentation rate over the preceding 5 years.

Puerto Rico↗

USGS2014

Geologic map and upper Paleozoic stratigraphy of the Marble Canyon area, Cottonwood Canyon quadrangle, Death Valley National Park, Inyo County, California

This geologic map and pamphlet focus on the stratigraphy, depositional history, and paleogeographic significance of upper Paleozoic rocks exposed in the Marble Canyon area in Death Valley National Park, California. Bedrock exposed in this area is composed of Mississippian to lower Permian (Cisuralian) marine sedimentary rocks and the Jurassic Hunter Mountain Quartz Monzonite. These units are overlain by Tertiary and Quaternary nonmarine sedimentary deposits that include a previously unrecognized tuff to which we tentatively assign an age of late middle Miocene (~12 Ma) based on tephrochronologic analysis, in addition to the previously recognized Pliocene tuff of Mesquite Spring. Mississippian and Pennsylvanian rocks in the Marble Canyon area represent deposition on the western continental shelf of North America. Mississippian limestone units in the area (Tin Mountain, Stone Canyon, and Santa Rosa Hills Limestones) accumulated on the outer part of a broad carbonate platform that extended southwest across Nevada into east-central California. Carbonate sedimentation was interrupted by a major eustatic sea-level fall that has been interpreted to record the onset of late Paleozoic glaciation in southern Gondwana. Following a brief period of Late Mississippian clastic sedimentation (Indian Springs Formation), a rise in eustatic sea level led to establishment of a new carbonate platform that covered most of the area previously occupied by the Mississippian platform. The Pennsylvanian Bird Spring Formation at Marble Canyon makes up the outer platform component of ten third-order (1 to 5 m.y. duration) stratigraphic sequences recently defined for the regional platform succession. The regional paleogeography was fundamentally changed by major tectonic activity along the continental margin beginning in middle early Permian time. As a result, the Pennsylvanian carbonate shelf at Marble Canyon subsided and was disconformably overlain by lower Permian units (Osborne Canyon and Darwin Canyon Formations) representing part of a deep-water turbidite basin filled primarily by fine-grained siliciclastic sediment derived from cratonal sources to the east. Deformation and sedimentation along the western part of this basin continued into late Permian time. The culminating phase was part of a regionally extensive late Permian thrust system that included the Marble Canyon thrust fault just west of the present map area.

California↗

USGS2015

Image mosaic and topographic map of the moon

Sheet 1: This image mosaic is based on data from the Lunar Reconnaissance Orbiter Wide Angle Camera (WAC; Robinson and others, 2010), an instrument on the National Aeronautics and Space Administration (NASA) Lunar Reconnaissance Orbiter (LRO) spacecraft (Tooley and others, 2010). The equatorial WAC images were orthorectified onto the Global Lunar Digital Terrain Mosaic (GLD100, WAC-derived 100 m/pixel digital elevation model; Scholten and others, 2012 ) while the polar images were orthorectified onto the lunar LOLA polar digital elevation models (Neumann and others, 2010). The Mercator projection is used between latitudes ±57°, with a central meridian at 0° longitude and latitude equal to the nominal scale at 0°. The Polar Stereographic projection is used for the regions north of the +55° parallel and south of the –55° parallel, with a central meridian set for both at 0° and a latitude of true scale at +90° and -90°, respectively. All named features greater than 85 km in diameter or length were included unless they were not visible on the map. Some selected well-known features less than 85 km in size were also included. For listed references, please open the full PDF. Sheet 2: This map is based on data from the Lunar Orbiter Laser Altimeter (LOLA; Smith and others, 2010), an instrument on the National Aeronautics and Space Administration (NASA) Lunar Reconnaissance Orbiter (LRO) spacecraft (Tooley and others, 2010). The image used for the base of this map represents more than 6.5 billion measurements gathered between July 2009 and July 2013, adjusted for consistency in the coordinate system described below, and then converted to lunar radii (Mazarico and others, 2012). For the Mercator portion, these measurements were converted into a digital elevation model (DEM) with a resolution of 0.015625 degrees per pixel, or 64 pixels per degree. In projection, the pixels are 473.8 m in size at the equator. For the polar portion, the LOLA elevation points were used to create a DEM at 240 meters per pixel. A shaded relief map was generated from each DEM with a sun angle of 45° from horizontal, and a sun azimuth of 270°, as measured clockwise from north with no vertical exaggeration. The DEM values were then mapped to a global color look-up table, with each color representing a range of 1 km of elevation. For this map sheet, only larger feature names are shown. For references listed above, please open the full PDF.

Scientific Investigations Map↗

USGS2016

Geologic map of the Rio Rico and Nogales 7.5’ quadrangles, Santa Cruz County, Arizona

The Rio Rico and Nogales (Arizona) 1:24,000-scale quadrangles are located in the Basin and Range Province of southern Arizona, and the southern edge of the map is the international border with Sonora, Mexico. The major urban area is Nogales, a bi-national city known as “the gateway to Mexico.” Rocks exposed in the map area range in age from Jurassic through Quaternary. Major physiographic, geologic, and hydrologic features in the map area include the southern San Cayetano Mountains, Grosvenor Hills, and Sonoita Creek in the northern part, and Mount Benedict and the Mount Benedict horst block in the southcentral part. The horst block is bounded by the Santa Cruz River on the east and Nogales Wash on the west. The objectives of our mapping were to define the geologic framework for the Nogales area and the upper Santa Cruz basin to support ongoing multidisciplinary projects. This new work will improve understanding of the Nogales Formation to more fully assess its groundwater resource potential. We significantly revised the Miocene Nogales Formation based on geologic mapping combined with new geochronologic, geophysical, and petrographic studies.

Arizona↗

USGS2004

Geologic Map of the Woodland Quadrangle, Clark and Cowlitz Counties, Washington

The Woodland 7.5' quadrangle is situated in the Puget-Willamette Lowland approximately 50 km north of Portland, Oregon (fig. 1). The lowland, which extends from Puget Sound into west-central Oregon, is a complex structural and topographic trough that lies between the Coast Range and the Cascade Range. Since late Eocene time, the Cascade Range has been the locus of an active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. The Coast Range occupies the forearc position within the Cascadia arc-trench system and consists of a complex assemblage of Eocene to Miocene volcanic and marine sedimentary rocks. The Woodland quadrangle lies at the northern edge of the Portland Basin, a roughly 2000-km2 topographic and structural depression that is the northernmost of several sediment-filled structural basins, which collectively constitute the Willamette Valley segment of the Puget-Willamette Lowland (Beeson and others, 1989; Swanson and others, 1993; Yeats and others, 1996). The Portland Basin is approximately 70 km long and 30 km wide; its long dimension is oriented northwest. Its northern boundary coincides, in part, with the lower Lewis River, which flows westward through the center of the quadrangle. The Lewis drains a large area in the southern Washington Cascade Range, including the southern flank of Mount St. Helens approximately 25 km upstream from the quadrangle, and joins the Columbia River about 6 km south of Woodland (fig. 1). Northwest of Woodland, the Columbia River exits the broad floodplain of the Portland Basin and flows northward through a relatively narrow bedrock valley at an elevation near sea level. The flanks of the Portland Basin consist of Eocene through Miocene volcanic and sedimentary rocks that rise to elevations exceeding 2000 ft (610 m). Seismic-reflection profiles (L.M. Liberty, written commun., 2003) and lithologic logs of water wells (Swanson and others, 1993; Mabey and Madin, 1995) indicate that as much as 550 m of late Miocene and younger sediments have accumulated in the deepest part of the basin near Vancouver. Most of this basin-fill material was carried in from the east by the Columbia River but sediment deposited by streams draining the adjacent highlands are locally important. The Portland Basin has been interpreted as a pull-apart basin located in the releasing stepover between two en echelon, northwest-striking, right-lateral fault zones (Beeson and others, 1985, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). These fault zones are thought to reflect regional transpression and dextral shear within the forearc in response to oblique subduction of the Pacific Plate along the Cascadia Subduction Zone (Pezzopane and Weldon, 1993; Wells and others, 1998). The southwestern margin of the Portland Basin is a well-defined topographic break along the base of the Tualatin Mountains, an asymmetric anticlinal ridge that is bounded on its northeast flank by the Portland Hills Fault Zone (Balsillie and Benson, 1971; Beeson and others, 1989; Blakely and others, 1995), which is probably an active structure (Wong and others, 2001; Liberty and others, 2003). The nature of the corresponding northeastern margin of the basin is less clear, but a poorly defined and partially buried dextral extensional fault zone has been hypothesized from topography, microseismicity, potential field-anomalies, and reconnaissance geologic mapping (Beeson and others, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). Another dextral structure may control the north-northwest-trending reach of the Columbia River between Portland and Longview (Blakely and others, 1995; Evarts, 2002; Evarts and others, 2002). This map is a contribution to a U.S. Geological Survey program designed to improve the geologic database for the Portland Basin part of the Pacific Northwest urban corridor,

Scientific Investigations Map↗

USGS2019

Geologic map of the central-southeast flank of Mauna Loa Volcano, Island of Hawaii, Hawaii

Mauna Loa, the largest volcano on Earth, has erupted 33 times since written descriptions became available in 1832. Some eruptions began with only brief seismic unrest, while others followed several months to a year of increased seismicity. Once underway, its eruptions can produce lava flows that may reach the sea in less than 24 hours, severing roads and utilities. For example, lava flows erupted from the Southwest Rift Zone (SWRZ) in 1950 advanced at an average rate of 9.3 km per hour, and all three lobes reached the ocean within approximately 24 hours (Finch and Macdonald, 1953). Near the eruptive vents, the flows must have traveled even faster. In terms of eruption frequency, pre-eruption warning, and rapid flow emplacement, Mauna Loa poses an enormous volcanic-hazard threat to the Island of Hawai‘i. Volcanic hazards on Mauna Loa may be anticipated, and risk substantially mitigated, by documenting the past activity to refine our knowledge of the hazards and by alerting the public and local government officials of our findings and their implications for hazards assessments and risk. From the geologic record, we may deduce several generalized facts about the geologic history of the Northeast Rift Zone (NERZ). The middle to uppermost segments of the rift zone were more active in the past 4,000 years than the lower portion of the rift zone. This may be due to buttressing of the lower east rift zone by Mauna Kea and Kīlauea volcanoes. The historical flows that erupted on the north side of the rift zone advanced toward Hilo. This flank of the volcano may be more vulnerable to inundation. Lockwood (1990) noted that the vents of historical activity are migrating to the south. The volcano appears to have a self-regulating mechanism that evenly distributes long-term activity across its flanks. The geologic record also supports this notion; the time prior to the historical period (Age Group 1, pre-A.D. 1832 to 1,000 yrs B.P.; orange units) is dominated by activity on the south side of the NERZ. Although most Mauna Loa eruptions begin in the summit area at the 12,000-ft elevation (Lockwood and Lipman, 1987), the central-southeast flank has not been the source of any activity. All flows originated from the summit or the upper reaches of the Northeast Rift Zone (NERZ) or the Southwest Rift Zone (SWRZ). The NERZ was the source of eight flank eruptions since 1843. The NERZ extends from the 13,680-ft-high summit towards Hilo (population ~60,000; second-largest city in State of Hawaii). The northern portion of the map area is built entirely on flows erupted from the NERZ. The SWRZ extends from the summit towards Kalae (South Point) at sea level. The southern portion of the map area is built entirely on flows erupted from the SWRZ. The map area extends from the 10,350 -ft elevation on Mauna Loa’s east flank toward the Hawaii Volcanoes National Park and the town of Volcano (population approx. 2,000) in the northeast. At the south boundary of the map area is the town of Pāhala (population approx. 900). This map includes areas adjacent to and downslope of the NERZ and regions east of and directly downslope of Moku‘āweoweo, Mauna Loa’s summit caldera. The map encompasses 506 km 2 of the southeast flank (fig. 1) of Mauna Loa from 10,350 -ft elevation to sea level. The map of the central-southeast flank of Mauna Loa shows the distribution and relations of volcanic and surficial sedimentary deposits separated into 15 age groups ranging from a period greater than 50,000 yr B.P. to A.D. 1984. It incorporates previously reported work published in generalized small-scale maps (Lockwood and Lipman, 1987; Lockwood, 1995; Wolfe and Morris, 1996). This map is the second in a series of five maps that will cover Mauna Loa volcano. See SIM 2932-A at https://doi.org/10.3133/sim2932A . NOTE: Map sheet 1 contains lines and type with overprint. This feature may be turned on or off in the Adobe Acrobat page display preferences.

Hawaii↗

USGS2024

Geologic map of the northwest flank of Mauna Loa volcano, Island of Hawai‘i, Hawaii

Mauna Loa, the largest active volcano on Earth, has erupted 34 times since written descriptions became available in A.D. 1832. The most recent eruption of Mauna Loa occurred on November 27, 2022, after a 38 year hiatus; it lasted for 12 days. Some eruptions began with only brief seismic unrest, whereas others followed several months to a year of increased seismicity. Once underway, Mauna Loa’s eruptions can produce lava flows that may reach the sea in less than 24 hours, severing roads and utilities. For example, lava flows that erupted from the Southwest Rift Zone in 1950 advanced at an average rate of 9.3 kilometers per hour (5.8 miles per hour); all three lobes reached the ocean within ~24 hours. Near the eruptive vents, the flows likely traveled even faster. In terms of eruption frequency, pre-eruption warning, and rapid flow emplacement, Mauna Loa has great volcanic-hazard potential for the Island of Hawai‘i. Volcanic hazards on Mauna Loa can be anticipated, and risk substantially mitigated, by documenting its past activity to refine our knowledge of the hazards, and by alerting the public and local government officials of our findings and their implications for hazards assessments and risk. The map of the north and west flanks of Mauna Loa shows the distribution and relation of volcanic and surficial sedimentary deposits. It incorporates previously reported work published as generalized small-scale maps and a more detailed map. Within the mapped area, lava has flowed from three different source regions: the Northeast Rift Zone (22 percent), the summit (64 percent), and radial vents (14 percent). All three have different points of origin which, in turn, affect the flow characteristics and periodicity of activity. The map area includes the uppermost part of the NERZ and extends from the highest elevation––13,040 feet at the south end of the Kokoolau quadrangle, just below the summit caldera––to the sea northwest and west of the summit. Lava that erupts from the north and west flanks typically flows to the west, northwest, or north, depending on the vent location. Both morphologic lava flow types—‘a‘ā and pāhoehoe—are present. Pāhoehoe units tend to spread out or widen in low-slope regions, such as in the saddle regions between Mauna Loa and Mauna Kea or between Mauna Loa and Hualālai. In comparison, ʻaʻā flows generally produce narrower flow lobes that have higher relief. This map is the fifth in a series of five maps that will cover Mauna Loa volcano. NOTE: Map sheet 1 contains lines and type with overprint. This feature may be turned on or off in the Adobe Acrobat page display preferences.

Hawaii↗

USGS2010

Terrestrial Ecosystems of the Conterminous United States

The U.S. Geological Survey (USGS), with support from NatureServe, has modeled the potential distribution of 419 terrestrial ecosystems for the conterminous United States using a comprehensive biophysical stratification approach that identifies distinct biophysical environments and associates them with known vegetation distributions (Sayre and others, 2009). This standardized ecosystem mapping effort used an ecosystems classification developed by NatureServe (Comer and others, 2003). The ecosystem mapping methodology was developed for South America (Sayre and others, 2008) and is now being implemented globally (Sayre and others, 2007). The biophysical stratification approach is based on mapping the major structural components of ecosystems (land surface forms, topographic moisture potential, surficial lithology, isobioclimates and biogeographic regions) and then spatially combining them to produce a set of unique biophysical environments. These physically distinct areas are considered as the fundamental structural units ('building blocks') of ecosystems, and are subsequently aggregated and labeled using the NatureServe classification. The structural footprints were developed from the geospatial union of several base layers including biogeographic regions, isobioclimates (Cress and others, 2009a), land surface forms (Cress and others, 2009b), topographic moisture potential (Cress and others, 2009c), and surficial lithology (Cress and others, in press). Among the 49,168 unique structural footprint classes that resulted from the union, 13,482 classes met a minimum pixel count threshold (20,000 pixels) and were aggregated into 419 NatureServe ecosystems using a semiautomated labeling process based on rule-set formulations for attribution of each ecosystem. The resulting ecosystems are those that are expected to occur based on the combination of the bioclimate, biogeography, and geomorphology. Where land use by humans has not altered land cover, natural vegetation assemblages are expected to occur, and these are described in the ecosystems classification. The map does not show the distribution of urban and agricultural areas - these will be masked out in subsequent analyses to depict the current land cover in addition to the potential distribution of natural ecosystems. This map depicts the smoothed and generalized image of the terrestrial ecosystems dataset. Additional information about this map and any data developed for the ecosystems modeling of the conterminous United States is available online at: http://rmgsc.cr.usgs.gov/ecosystems/.

Scientific Investigations Map↗

USGS2012

Geologic map of the Cook Inlet region, Alaska, including parts of the Talkeetna, Talkeetna Mountains, Tyonek, Anchorage, Lake Clark, Kenai, Seward, Iliamna, Seldovia, Mount Katmai, and Afognak 1:250,000-scale quadrangles

In 1976, L.B. Magoon, W.L. Adkinson, and R.M. Egbert published a major geologic map of the Cook Inlet region, which has served well as a compilation of existing information and a guide for future research and mapping. The map in this report updates Magoon and others (1976) and incorporates new and additional mapping and interpretation. This map is also a revision of areas of overlap with the geologic map completed for central Alaska (Wilson and others, 1998). Text from that compilation remains appropriate and is summarized here; many compromises have been made in strongly held beliefs to allow construction of this compilation. Yet our willingness to make interpretations and compromises does not allow resolution of all mapping conflicts. Nonetheless, we hope that geologists who have mapped in this region will recognize that, in incorporating their work, our regional correlations may have required some generalization or lumping of map units. Many sources were used to produce this geologic map and, in most cases, data from available maps were combined, without generalization, and new data were added where available. A preliminary version of this map was published as U.S. Geological Survey Open-File Report 2009–1108. The main differences between the versions concern revised mapping of surfical deposits in the northern and eastern parts of the map area. Minor error corrections have been made also.

Alaska↗

USGS2013

Bathymetric map, area/capacity table, and sediment volume estimate for Millwood Lake near Ashdown, Arkansas, 2013

Millwood Lake, in southwestern Arkansas, was constructed and is operated by the U.S. Army Corps of Engineers (USACE) for flood-risk reduction, water supply, and recreation. The lake was completed in 1966 and it is likely that with time sedimentation has resulted in the reduction of storage capacity of the lake. The loss of storage capacity can cause less water to be available for water supply, and lessens the ability of the lake to mitigate flooding. Excessive sediment accumulation also can cause a reduction in aquatic habitat in some areas of the lake. Although many lakes operated by the USACE have periodic bathymetric and sediment surveys, none have been completed for Millwood Lake. In March 2013, the U.S. Geological Survey (USGS), in cooperation with the USACE, surveyed the bathymetry of Millwood Lake to prepare an updated bathymetric map and area/capacity table. The USGS also collected sediment thickness data in June 2013 to estimate the volume of sediment accumulated in the lake.

Arkansas↗

USGS2014

Bathymetry of the waters surrounding the Elizabeth Islands, Massachusetts

The Elizabeth Islands in Massachusetts that separate Vineyard Sound from Buzzards Bay are the remnants of a moraine (unconsolidated glacial sediment deposited at an ice sheet margin; Oldale and O’Hara, 1984). The most recent glacial ice retreat in this region occurred between 25,000 and 20,000 years ago, and the subsequent rise in sea level that followed deglaciation caused differences in the seafloor character between Buzzards Bay and Vineyard Sound. The relatively rough seafloor of Vineyard Sound reflects widespread exposure of glacial material. Shoals mark the location of recessional ice contact material, and deep channels illustrate where meltwater drainage incised glacial deposits. Following ice retreat from the Elizabeth Islands, a glacial lake formed across the mouth of Buzzards Bay, when the lake drained, it scoured two deep channels at the southern end of the bay. Sea level rise began to inundate Vineyard Sound and Buzzards Bay about 8,000 years ago and continues to modify the modern seafloor (Robb and Oldale, 1977). Fine-grained marine and estuarine sediments were deposited in the partially protected setting of Buzzards Bay. These deposits, up to 10 meters in thickness, buried the high-relief glacial landscape and created the generally smooth modern seafloor. In contrast, the Vineyard Sound of today experiences strong tidal currents, which largely prevent the deposition of fine-grained material and constantly rework the glacial sand and gravel within shoals. The seafloor of the sound largely reflects the contours of the ancient glaciated landscape that existed before sea level began to rise. The bathymetric data used to create the hillshaded relief image of the seafloor were collected by the U.S. Geological Survey (USGS) in cooperation with the Massachusetts Office of Coastal Zone Management and supplemented with National Oceanic and Atmospheric Administration hydrographic survey data. The map shows the detailed bathymetry of Buzzards Bay and Vineyard Sound with depth soundings shown on a 5-meter-per-pixel grid. Depths are coded by color where the deepest areas are in blue and the shallowest areas are in orange. The aerial photography for the Elizabeth Islands and Massachusetts mainland were obtained from the Massachusetts Office of Geographic Information. Data collected during this statewide cooperative project have been released in a series of USGS open-file reports. These publications and information regarding geologic mapping in Massachusetts can be obtained from the Coastal and Marine Geology Program’s Web site (http://woodshole.er.usgs.gov/project-pages/coastal_mass/).

Massachusetts↗