USGS Science⌕ Search

SEARCH · USGS Science

Results for “Remote Sensing”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources
USGS2025

The U.S. Geological Survey, the U.S. Department of Defense, and the U.S. Intelligence Community—100 years of mapping and remote sensing collaboration, 1879–1979

Introduction The U.S. Geological Survey (USGS)—a Federal civilian agency—and U.S. military and intelligence agencies collaborate on mapping and remote sensing and have since the establishment of the USGS. The organizations exchange data and information and share technology to further their respective missions in service to the American people. Often referred to as examples of “good government” or “whole of government,” the collaboration avoids costly duplication and maximizes time and effort for the government sectors. Collaboration between these sectors started with the original mapping of the United States and evolved to include remote sensing after the advent of aerial photography and satellite imagery.

Circular↗
USGS1987

Remote sensing investigations at a hazardous-waste landfill

In 1976 state licensed landfilling of industrial chemicals was begun above an abandoned, underground coal mine in Illinois. Five years later organic chemical pollutants were discovered in a monitoring well, suggesting migration 100 to 1000 times faster than predicted by laboratory tests. Remote sensing contributed to the determination of the causes of faster-than-predicted pollutant migration at the hazardous-waste landfill. Aerial and satellite imagery were employed to supplement field studies of local surface and groundwater hydrology, and to chronicle site history. Drainage impediments and depressions in the trench covers collected runoff, allowing rapid recharge of surface waters to some burial trenches. These features can be more effectively identified by photointerpretation than by conventional field reconnaissance. A ground-based, post-sunset survey of the trench covers that showed that a distinction between depressions which hold moisture at the surface from freely-draining depressions which permit rapid recharge to the burial trenches could be made using thermal infrared imagery.In 1976 state licensed landfilling of industrial chemicals was begun above an abandoned, underground coal mine in Illinois. Five years later organic chemical pollutants were discovered in a monitoring well, suggesting migration 100 to 1000 times faster than predicted by laboratory tests. Remote sensing contributed to the determination of the causes of faster-than-predicted pollutant migration at the hazardous-waste landfill. Aerial and satellite imagery were employed to supplement field studies of local surface and groundwater hydrology, and to chronicle site history. Drainage impediments and depressions in the trench covers collected runoff, allowing rapid recharge of surface waters to some burial trenches.

Photogrammetric Engineering and Remote Sensing↗
USGS2007

Remotely Sensed Data Collections: Offerings from EROS

The U.S. Geological Survey (USGS) Center for Earth Resources Observation and Science (EROS) maintains a wide variety of remotely sensed data collections that contain a wealth of information about the Earth’s land surfaces. Acquired by special sensors carried aboard civilian satellites and aircraft, the images and other data in these collections provide a unique perspective of the terrestrial environment. They represent invaluable resources for scientists, resource managers, policy makers, and educators to use in studying such things as natural hazards, conservation issues, land use and economic development, and environmental change at local, regional, and global levels. Different types of sensors record different types of information, resulting in diverse data products, each with its own particular strengths. Highlighted here are eight remotely sensed data collections that are currently available from EROS.

Fact Sheet↗
USGS1978

Remote-sensing methods for monitoring surface coal mining in the northern Great Plains

Recent studies at a large surface coal mine in southern Montana confirm that remote sensing is both feasible and effective for gathering land-use and environmental data (spatial, dynamic, and seasonal) for large-scale surface mines in the northern Great Plains. The Western Energy Co.'s Rosebud mine near Colstrip, Mont., was selected as a test site because it typifies surface operations in the Powder River Basin of Montana and Wyoming and elsewhere in the northern Great Plains. Several basic interpretive and analytical remote-sensing techniques were used to identify and delineate various categories of surface-mining operations and concurrent stages of reclamation that characterize most, if not all, such mining operations. Color infrared and black-and-white aerial photographs and a black-and-white band 5 Landsat image were used to identify (1) high wall and bench areas, (2) ungraded spoils, (3) graded and recontoured areas, (4) revegetated recontoured areas, (5) natural and impounded surface water, and (6) miscellaneous areas. Over the lifespan of an extensive surface mine, cultural and natural processes and cumulative environmental effects can be monitored by capitalizing on the close correlation between enhanced satellite imagery, infrared and (or) black-and-white aerial photography, standard large-scale topographic maps (such as U.S. Geological Survey 7½-minute quadrangle maps), and results of onsite inspection of mining and reclamation by Federal or State agencies.

Montana↗
USGS2016

Improved ground-based remote-sensing systems help monitor plant response to climate and other changes

Scientists at the U.S. Geological Survey are improving and developing new ground-based remote-sensing instruments and techniques to study how Earth’s vegetation responds to changing climates. Do seasonal grasslands and forests “green up” early (or late) and grow more (or less) during unusually warm years? How do changes in temperature and precipitation affect these patterns? Innovations in ground-based remote-sensing instrumentation can help us understand, assess, and mitigate the effects of climate change on vegetation and related land resources.

Fact Sheet↗
USGS2011

Hyperspectral remote sensing tools for quantifying plant litter and invasive species in arid ecosystems

Green vegetation can be monitored and distinguished using visible and infrared multiband and hyperspectral remote sensing methods. The problem has been in identifying and distinguishing the nonphotosynthetically active radiation (PAR) landscape components, such as litters and soils, from green vegetation [35-38]. Additionally, distinguishing different species of green vegetation is challenging using the relatively few bands available on most satellite sensors. This chapter focuses both on previously published work by Nagler et al. [35-38] that identified hyperspectral remote sensing characteristics that distinguish between green vegetation, soil, and litter (or senescent vegetation), and on new research conducted to aid in distinguishing invasive species from the mixed landcover surface.

Book chapter↗
USGS2026

Basal area loss from fire using field-calibrated remote sensing refines western US fire severity measurements

The spatial patterns of fire effects and tree mortality have profound consequences for forest resilience. Cost-effective, medium-resolution, and spatiotemporally extensive fire severity measurements are essential for informing post-fire restoration and improving our understanding of wildfires—from forest stands to continents and from days to decades. Remote sensing advancements have improved burn severity mapping, but methods vary in interpretability, scalability, generalizability, and alignment with field measurements. One meaningful metric of fire effects on forests is proportion basal area loss, but existing methods are limited by a lack of region-specific field reference data and a scalable mapping framework. To address these issues, we compiled 3280 field reference plots from 123 fires in forests across the Western US to calculate the proportion of fire-induced basal area loss. We then used spatially cross-validated machine learning models with concurrent hyperparameter tuning to select a skillful, parsimonious model from a large candidate set of remotely-sensed, climatic, and topographic predictors. Spectral-only measures of severity over- or underestimated basal area loss in dry versus wet years and across aspects, demonstrating the value of incorporating climatic and topographic context. We also tested model performance on a separate holdout dataset in the Southwest US as a demonstration of reproducibility and transparency. We provide a Google Earth Engine tool for estimating proportional basal area loss for any fire perimeter in the Western US, enabling rapid map creation for land management and ecological modeling. All code, model parameters, and training data are released to support reproducibility, community adoption, regional refinement, and adaptation to new regions.

western United States↗
USGS2009

The emerging role of lidar remote sensing in coastal research and resource management

Knowledge of coastal elevation is an essential requirement for resource management and scientific research. Recognizing the vast potential of lidar remote sensing in coastal studies, this Special Issue includes a collection of articles intended to represent the state-of-the-art for lidar investigations of nearshore submerged and emergent ecosystems, coastal morphodynamics, and hazards due to sea-level rise and severe storms. Some current applications for lidar remote sensing described in this Special Issue include bluegreen wavelength lidar used for submarine coastal benthic environments such as coral reef ecosystems, airborne lidar used for shoreline mapping and coastal change detection, and temporal waveform-resolving lidar used for vegetation mapping.

Journal of Coastal Research↗
USGS2020

Estimating the effect of winter cover crops on nitrogen leaching using cost-share enrollment data, satellite remote sensing, and Soil and Water Assessment Tool (SWAT) modeling

This study employed a novel combination of data (winter cover crop cost-share enrollment records, satellite remote sensing of wintertime vegetation, and results of Soil and Water Assessment Tool (SWAT) water quality simulations) to estimate the environmental performance of winter cover crops (WCC) at the watershed scale, from 2008 through 2017, within the Tuckahoe sub-watershed of the Choptank River. The Choptank is a river basin within the Chesapeake Bay watershed and, as a focus watershed for the U.S. Department of Agriculture’s Conservation Effects Assessment Project (CEAP), has been the subject of considerable study assessing linkages between land use and water quality. Farm enrollment data from the Maryland Agricultural Cost Share (MACS) program documented a strong increase in the use of WCC within the Tuckahoe watershed during the study period, from 27% of corn fields and 9% of soybean fields in 2008 to 89% of corn fields and 46% of soybean fields in 2016. Satellite remote sensing of wintertime ground cover detected increased wintertime vegetation following corn crops, in comparison to full season and double cropped soybean, consistent with patterns of cover crop implementation. Although inter-annual variation in climate strongly affected observed levels of vegetation, with warm winters resulting in increased vegetative cover, a 30-year analysis of wintertime greenness revealed significant increases in wintertime vegetation associated increased adoption of WCC. The predominant WCC species recorded by the MACS program as planted in the Tuckahoe watershed were wheat (68.1%), barley (16.1%), and rye (7.2%). The MACS WCC enrollment data were combined with output from the SWAT model, calibrated to streamflow and nutrient loading from the Tuckahoe watershed, to estimate water quality impacts based on known distribution of cover crop species and planting dates (2008 to 2017). Results indicated a 25% overall 10-year reduction in nitrate leaching from cropland resulting from cover crop adoption, rising to an estimated 38% load reduction in 2016 when 64% of fields were planted to cover crops. A large portion of WCC (39.3%) were planted late (after October 15) and planted to wheat (68.1%). Increased environmental benefits would be achieved by shifting agronomic methods away from late-planted wheat.

Delaware, Maryland↗
USGS1992

Cooperative studies between the United States of America and the People's Republic of China on applications of remote sensing to surveying and mapping

A Protocol established between the National Bureau of Surveying and Mapping, People's Republic of China (PRC) and the U.S. Geological Survey, United States of America (US), resulted in the exchange of scientific personnel, technical training, and exploration of the processing of remotely sensed data. These activities were directed toward the application of remotely sensed data to surveying and mapping. Data were processed and various products were generated for the Black Hills area in the US and the Ningxiang area of the PRC. The results of these investigations defined applicable processes in the creation of satellite image maps, land use maps, and the use of ancillary data for further map enhancements.

Bulletin↗
USGS2018

Detecting geothermal anomalies and evaluating LST geothermal component by combining thermal remote sensing time series and land surface model data

This paper explores for the first time the possibilities to use two land surface temperature (LST) time series of different origins (geostationary Meteosat Second Generation satellite data and Noah land surface modelling, LSM), to detect geothermal anomalies and extract the geothermal component of LST, the LST gt . We hypothesize that in geothermal areas the LSM time series will underestimate the LST as compared to the remote sensing data, since the former does not account for the geothermal component in its model. In order to extract LST gt , two approaches of different nature (physical based and data mining) were developed and tested in an area of about 560 × 560 km 2 centered at the Kenyan Rift. Pre-dawn data in the study area during the first 45 days of 2012 were analyzed. The results show consistent spatial and temporal LST gt patterns between the two approaches, and systematic differences of about 2 K. A geothermal area map from surface studies was used to assess LST gt inside and outside the geothermal boundaries. Spatial means were found to be higher inside the geothermal limits, as well as the relative frequency of occurrence of high LST gt . Results further show that areas with strong topography can result in anomalously high LST gt values (false positives), which suggests the need for a slope and aspect correction in the inputs to achieve realistic results in those areas. The uncertainty analysis indicates that large uncertainties of the input parameters may limit detection of LST gt anomalies. To validate the approaches, higher spatial resolution images from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data over the Olkaria geothermal field were used. An established method to estimate radiant geothermal flux was applied providing values between 9 and 24 W/m 2 in the geothermal area, which coincides with the LST gt flux rates obtained with the proposed approaches. The proposed approaches are a first step in estimating LST gt at large spatial coverage from remote sensing and LSM data series, and provide an innovative framework for future improvements.

Remote Sensing of Environment↗
USGS2016

Landscape effects of wildfire on permafrost distribution in interior Alaska derived from remote sensing

Climate change coupled with an intensifying wildfire regime is becoming an important driver of permafrost loss and ecosystem change in the northern boreal forest. There is a growing need to understand the effects of fire on the spatial distribution of permafrost and its associated ecological consequences. We focus on the effects of fire a decade after disturbance in a rocky upland landscape in the interior Alaskan boreal forest. Our main objectives were to (1) map near-surface permafrost distribution and drainage classes and (2) analyze the controls over landscape-scale patterns of post-fire permafrost degradation. Relationships among remote sensing variables and field-based data on soil properties (temperature, moisture, organic layer thickness) and vegetation (plant community composition) were analyzed using correlation, regression, and ordination analyses. The remote sensing data we considered included spectral indices from optical datasets (Landsat 7 Enhanced Thematic Mapper Plus (ETM+) and Landsat 8 Operational Land Imager (OLI)), the principal components of a time series of radar backscatter (Advanced Land Observing Satellite—Phased Array type L-band Synthetic Aperture Radar (ALOS-PALSAR)), and topographic variables from a Light Detection and Ranging (LiDAR)-derived digital elevation model (DEM). We found strong empirical relationships between the normalized difference infrared index (NDII) and post-fire vegetation, soil moisture, and soil temperature, enabling us to indirectly map permafrost status and drainage class using regression-based models. The thickness of the insulating surface organic layer after fire, a measure of burn severity, was an important control over the extent of permafrost degradation. According to our classifications, 90% of the area considered to have experienced high severity burn (using the difference normalized burn ratio (dNBR)) lacked permafrost after fire. Permafrost thaw, in turn, likely increased drainage and resulted in drier surface soils. Burn severity also influenced plant community composition, which was tightly linked to soil temperature and moisture. Overall, interactions between burn severity, topography, and vegetation appear to control the distribution of near-surface permafrost and associated drainage conditions after disturbance.

Alaska↗
USGS2016

An optimal sample data usage strategy to minimize overfitting and underfitting effects in regression tree models based on remotely-sensed data

Regression tree models have been widely used for remote sensing-based ecosystem mapping. Improper use of the sample data (model training and testing data) may cause overfitting and underfitting effects in the model. The goal of this study is to develop an optimal sampling data usage strategy for any dataset and identify an appropriate number of rules in the regression tree model that will improve its accuracy and robustness. Landsat 8 data and Moderate-Resolution Imaging Spectroradiometer-scaled Normalized Difference Vegetation Index (NDVI) were used to develop regression tree models. A Python procedure was designed to generate random replications of model parameter options across a range of model development data sizes and rule number constraints. The mean absolute difference (MAD) between the predicted and actual NDVI (scaled NDVI, value from 0–200) and its variability across the different randomized replications were calculated to assess the accuracy and stability of the models. In our case study, a six-rule regression tree model developed from 80% of the sample data had the lowest MAD (MAD training = 2.5 and MAD testing = 2.4), which was suggested as the optimal model. This study demonstrates how the training data and rule number selections impact model accuracy and provides important guidance for future remote-sensing-based ecosystem modeling.

Remote Sensing↗
USGS2014

Spectroscopic remote sensing of plant stress at leaf and canopy levels using the chlorophyll 680 nm absorption feature with continuum removal

This paper explores the use of spectral feature analysis to detect plant stress in visible/near infrared wavelengths. A time series of close range leaf and canopy reflectance data of two plant species grown in hydrocarbon-contaminated soil was acquired with a portable spectrometer. The ProSpecTIR-VS airborne imaging spectrometer was used to obtain far range hyperspectral remote sensing data over the field experiment. Parameters describing the chlorophyll 680 nm absorption feature (depth, width, and area) were derived using continuum removal applied to the spectra. A new index, the Plant Stress Detection Index (PSDI), was calculated using continuum-removed values near the chlorophyll feature centre (680 nm) and on the green-edge (560 and 575 nm). Chlorophyll feature’s depth, width and area, the PSDI and a narrow-band normalised difference vegetation index were evaluated for their ability to detect stressed plants. The objective was to analyse how the parameters/indices were affected by increasing degrees of plant stress and to examine their utility as plant stress indicators at the remote sensing level (e.g. airborne sensor). For leaf data, PSDI and the chlorophyll feature area revealed the highest percentage (67–70%) of stressed plants. The PSDI also proved to be the best constraint for detecting the stress in hydrocarbon-impacted plants with field canopy spectra and airborne imaging spectroscopy data. This was particularly true using thresholds based on the ASD canopy data and considering the combination of higher percentage of stressed plants detected (across the thresholds) and fewer false-positives.

Paulinia↗
USGS2022

Remote sensing and mapping Miocene paleovalleys of the Marble, Bristol, and Old Dad Mountains in the Trilobite and Bristol Mountain Wildernesses, California

Wilderness areas in the Mojave Desert, California, are remote and rugged terrain, but they contain important geology for understanding faults of the eastern California shear zone (ECSZ), and remote sensing offers techniques that can optimize mapping. The Bristol–Granite Mountain fault zone (BGMFZ) is the easternmost fault of the ECSZ with the Marble, Bristol, and Old Dad mountains on either side of the fault, as are the Trilobite and Bristol Mountain Wildernesses. In the northern Marble Mountains, a west-trending Miocene paleovalley has been proposed to have a correlative in the Old Dad Mountains and provides a constraint for right-lateral separation across the BGMFZ; however, this correlation is based on the premise that there was a unique paleovalley with a well defined geometry. In the northern Marble Mountains, a paleovalley was mapped by the distribution of (1) thickness and facies within the Lost Marble gravel (LMg) and 18.8 Ma Peach Spring Tuff (PST), and (2) adjacent highlands where the PST was deposited on basalt and dacite lava flows. Whether this paleovalley is unique, or there are other paleovalleys farther south in the Marble Mountains, requires mapping of the entire 5 by 28 km area of Miocene volcanic rocks. In the south Bristol and Old Dad mountains, there is a similar 12 by 22 km area of Miocene basalt and dacite with deposits of PST and local sedimentary rocks, including the proposed offset Lost Marble paleovalley, but the entire range needs to be mapped to establish a unique correlate. The mountains are in the Mojave Trails National Monument, and the Trilobite and Bristol Mountains wilderness areas, so access is limited. Remote sensing data, including aerial photography and hyperspectral images, are important for identification and characterization of rocks. Airborne hyperspectral Mako data can distinguish the distinctive spectral characteristics of the PST as well as several more map units identified by detailed field mapping in the Bristol Mountains. Reconnaissance maps derived from high spatial resolution Mako data can guide the detailed mapping needed to identify paleovalley or paleohighland deposits and can be used to optimize field time.

California↗
USGS1978

Approaches to remote sensing data analysis

Objectives: To present an overview of the essential steps in the remote sensing data analysis process, and to compare and contrast manual (visual) and automated analysis methods Rationale: This overview is intended to provide a framework for choosing a manual of digital analysis approach to collecting resource information. It can also be used as a basis for understanding/evaluating invited papers and poster sessions during the Symposium

Pecora IV: Application of Remote Sensing Data to W↗
USGS2025

RUSH: Rapid remote sensing Updates of land cover for Storm and Hurricane forecast models

Coastal vegetated ecosystems, including tidal marshes, vegetated dunes, and shrub- and forest-dominated wetlands, can mitigate hurricane impacts such as coastal flooding and erosion by increasing surface roughness and reducing wave energy. Land cover maps can be used as input to improve simulations of surface roughness in advanced hydro-morphological models. Consequently, there is a need for efficient tools to develop up-to-date land cover maps that include the accurate distribution of vegetation types prior to an extreme storm. In response, we developed the RUSH tool (Rapid remote sensing Updates of land cover for Storm and Hurricane forecast models). RUSH delivers high-resolution maps of coastal vegetation for near-real-time or historical conditions via a Jupyter Notebook application and a graphical user interface (GUI). The application generates 3 m spatial resolution land cover maps with classes relevant to coastal settings, especially along mainland beaches, headlands, and barrier islands, as follows: (1) open water; (2) emergent wetlands; (3) dune grass; (4) woody wetlands; and (5) bare ground. These maps are developed by applying one of two seasonal random-forest machine learning models to Planet Labs SuperDove multispectral imagery. Cool Season and Warm Season Models were trained on 665 and 594 reference points, respectively, located across study regions in the North Carolina Outer Banks, the Mississippi Delta in Louisiana, and a portion of the Florida Gulf Coast near Apalachicola. Cool Season and Warm Season Models were tested with 666 and 595 independent points, with an overall accuracy of 93% and 94%, respectively. The Jupyter Notebook application provides users with a flexible platform for customization for advanced users, whereas the GUI, designed with user-experience feedback, provides non-experts access to remote sensing capabilities. This application can also be used for long-term coastal geomorphic and ecosystem change assessments.

Florida, Louisiana, North Carolina↗
USGS2020

Using remote sensing products to predict recovery of vegetation across space and time following energy development

Using localized studies to understand how ecosystems recover can create uncertainty in recovery predictions across landscapes. Large archives of remote sensing data offer opportunities for quantifying the spatial and temporal factors influencing recovery at broad scales and predicting recovery. For example, energy production is a widespread and expanding land use among many semi-arid ecosystems of the Western United States dominated by sagebrush ( Artemisia spp.), a keystone species providing a variety of ecological services. With remotely-sensed (Landsat) estimates of vegetation cover collected every 2–5 years from southwestern Wyoming, USA, over nearly three decades (1985–2015), we modeled changes in sagebrush cover on 375 former oil and gas well pads in response to weather and site-level conditions. We then used modeled relationships to predict recovery time across the landscape as an indicator of resilience for vegetation after well pad disturbances, where faster recovery indicates a greater capacity to recover when similarly disturbed. We found the rate of change in sagebrush cover generally increased with moisture and temperature, particularly at higher elevations. Rate of change in sagebrush cover also increased and decreased with greater percent sand and larger well pads, respectively. We predicted 21% of the landscape would recover to pre-disturbance conditions within 60 years, whereas other areas may require >100 years for recovery. These predictions and maps could inform future restoration efforts as they reflect resilience. This approach also is applicable to other disturbance types (e.g., fires and vegetation removal treatments) across landscapes, which can further improve conservation efforts by characterizing past conditions and monitoring trends in subsequent years.

Wyoming↗