USGS Science⌕ Search

SEARCH · USGS Science

Results for “Energy Economics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources
USGS2019

The US Geological Survey’s Earth Mapping Resources Initiative (Earth MRI)—Providing framework geologic, geophysical, and elevation data to the nation’s critical mineral-bearing regions

New detailed mapping of the geologic resources of the Nation has the potential to significantly close the gap in the essential data needed to fuel a modern era of economic development and technological innovation, while at the same time dramatically enhancing our understanding of the fundamental way geology impacts everyday life, from the domestic critical mineral resources that are necessary for modern technology and the economy, to domestic energy and water resources, geologic hazards, agriculture, and other pressing needs. The U.S. Geological Survey established the Earth Resources Mapping Initiative (Earth MRI) to address the shortfall in geologic, geophysical, and elevation data with sufficient detail to support evaluation of regions in the United States that have potential to host critical mineral resources. The new effort is a collaboration with the Association of American State Geologists, who are providing new detailed geologic maps and making available online archived data and information related to critical mineral resources. The geophysical and lidar surveys are being contracted through industry specialists to assure that high-quality data are available to the public. This article provides an overview of the Earth MRI effort with discussions on the initial geophysical surveys funded for areas that have known potential for rare earth element resources. Subsequent projects are being designed to address areas that may host other critical mineral resources.

Fast Times↗
USGS2014

Bituminous coal production in the Appalachian basin: past, present, and future

Although small quantities of coal first were produced from the Appalachian basin in the early 1700s, the first production statistics of significance were gathered during the census of 1830 (Eavenson, 1942). Since then, about 35 billion short tons of bituminous coal have been produced from the Appalachian basin from an original potential coal reserve (PCR (o) ) estimated to range from about 60 to 90 billion short tons. The term “reserve” refers to economically producible coal, and a “potential coal reserve” (PCR (n) ) is an estimate of the amount of coal economically recoverable in a region (State, coal field) over a defined time period (n = number of years) and under a range of economic, societal, and technological conditions. Thus, the current cumulative production plus the PCR (n) equals an estimated cumulative production (ECP (n) ). The maps in this report (oversized figures 1, 2, 3, and 4) were produced from a digital database of historical and current coal production records by county. Sources of the original data include various State geological surveys, the U.S. Geological Survey, the former U.S. Bureau of Mines, and the U.S. Department of Energy’s Energy Information Administration. This report is part of the U.S. Geological Survey’s National Coal Resource Assessment Project. The Appalachian basin consistently has lead all other regions of the country in coal production and, until 1970, produced 70 percent or more of the coal produced in the Nation (fig. 5). Since 1970, however, the relative amount of coal coming from the Appalachian basin has declined from about 70 percent to 43 percent. Historically, coal production from the Appalachian basin may be divided into three economically driven cycles: (1) from the inception of exploration and development of the resource through World War I (1914) to the Depression (1929 to the early 1940s); (2) from the Depression through World War II (1944) to the production decline in 1961; and (3) from 1961 through the current period of increasing demand for coal by the electric power industry (fig. 6). Annual coal production from the Appalachian basin peaked in 1997 at 476.8 million tons and has since declined to 375.3 million tons as of 2003. This report on Appalachian basin coal production consists of four plates and associated graphs and tables that were used to construct the maps. Figure 1 shows the decade of greatest coal production by county. Figure 2 shows the amount of coal produced for each county (in thousands of short tons) during the year of greatest coal production. These data are sorted by decade. Figure 3 illustrates the cumulative coal production (in thousands of short tons) for each county since about the beginning of the 20th century. Figure 4 shows 2003 production by county in thousands of short tons.

Appalachian basin↗
USGS1990

Coal in sub-Saharan-African countries undergoing desertification

Coal has been reported in 11 of the 16 sub-Saharan countries discussed in this appraisal: Mauritania, Senegal, Mali, Niger, Benin, Nigeria, Cameroon, Central African Republic, Sudan, Ethiopia, and Somalia. No coal occurrences have been reported in Gambia, Togo, Burkina, Chad, and Djibouti but coal may be present within these countries because neighboring countries do contain coal-bearing rocks. Most of these countries are undergoing desertification or will in the near future. Wood, directly or in the form of charcoal, constitutes two-thirds of the fuel used in Africa. Destruction of forest and shrub lands for fuel is occurring at an increasing rate because of desertification and increasing energy demands. The decline in biological productivity, coupled with concentration of population in areas where water is available and crops may be grown, leads to increasing shortages of wood for fuel. Part of the present and future energy needs of the sub-Saharan region could be met by use of indigenous coal and peat. Nine sedimentary basins, completely or partially within the sub-Saharan region, have the potential of either coal and/or peat deposits of economic value: 1- Senegal Basin, 2- Taoudeni Basin and Gao Trough, 3- Niger Basin, 4- Chad Basin, 5- Chari Basin, 6- Benue Trough (Depression), 7- Sudan Trough, 8- Plateau and Rift Belt, and 9- Somali Basin. Niger and Nigeria are the only countries in sub-Saharan Africa in which coal is presently being mined as a fuel source for powerplants and domestic use. Peat occurs in the deltas, lower river, and interdunal basin areas of Senegal, Mauritania, and Sudan. Peat can be used as an alternate fuel source and is currently being tested as a soil amendment in the agricultural sector.

Journal of African Earth Sciences↗
USGS2017

U.S. Geological Survey—Energy and wildlife research annual report for 2017

Introduction Terrestrial and aquatic ecosystems provide valuable services to humans and are a source of clean water, energy, raw materials, and productive soils. The Nation’s food supply is more secure because of wildlife. For example, native pollinators enhance agricultural crops, and insect-eating bats provide pest control services worth billions of dollars to farmers annually. Fish and wildlife are also vital to a vibrant outdoor recreation and tourism industry. Recreational activities, such as hunting, shooting, boating, and angling, generated \$1.1 billion in excise taxes paid to State wildlife agencies in 2017. National parks, wildlife refuges, and monuments accounted for $35 billion in economic output and 318,000 jobs nationwide in 2016. Additional economic benefits are generated from the use and enjoyment of wildlife in State-owned lands and waters. Although the United States is rich in natural resources, human activity continues to place new pressures on fish and wildlife and the habitats they rely on. The United States became the world’s top producer of petroleum and natural gas products in 2012, surpassing Russia’s natural gas production levels in 2009 and Saudi Arabia’s petroleum production in 2013. The U.S. Energy Information Administration projects that the demand for liquid fuel, natural gas, and renewable energy will show strong growth in the next 20 years. Wind energy has demonstrated consistent growth since 2007 with now more than 53,000 wind turbines contributing to power grids in 41 States, Guam, and Puerto Rico. Solar energy has seen rapid growth since 2013 and made up nearly one-third of the total electricity generation additions in 2016. Yet as our Nation works to advance energy security and sustain wildlife, some conflicts have surfaced. Impacts of an expanding energy infrastructure include fragmentation and loss of habitat as well as mortality of birds, bats, fish, and other animals from interactions with energy generation facilities. Because energy development can often occur in wildlife habitats, ecological science can help guide project siting and operational decisions to areas that present the lowest risk to wildlife and energy developers. To address these challenges and make the most of new opportunities, the U.S. Geological Survey is producing innovative science to develop workable solutions that can help sustain wildlife and the habitat they rely upon, while allowing informed development.

Circular↗
USGS2008

Interior River Lowland Ecoregion Summary Report

ECOREGION DESCRIPTION The Interior River Lowlands ecoregion encompasses 93,200 square kilometers (km2) across southern and western Illinois, southwest Indiana, east-central Missouri, and fractions of northwest Kentucky and southeast Iowa. The ecoregion includes the confluence areas of the Mississippi, Missouri, Ohio, Illinois, and Wabash Rivers, and their tributaries. This ecoregion was formed in non-resident, non-calcareous sedimentary rock (U.S. Environmental Protection Agency, 2006). The unstratified soil deposits present north of the White River in Indiana are evidence that pre-Wisconsinan ice once covered much of the Interior River Lowlands. The geomorphic characteristics of this area also include terraced valleys filled with alluvium as well as outwash, acolian, and lacustrine deposits. Historically, agricultural land use has been a vital economic resource for this region. The drained alluvial soils are farmed for feed grains and soybeans, whereas the valley uplands also are used for forage crops, pasture, woodlots, mixed farming, and livestock (USEPA, 2006). This ecoregion provides a key component of national energy resources as it contains the second largest coal reserve in the United States, and the largest reserve of bituminous coal (Varanka and Shaver, 2007). One of the primary reasons for change in the ecoregion is urbanization.

Open-File Report↗
USGS2012

Geologic framework for the national assessment of carbon dioxide storage resources: Hanna, Laramie, and Shirley Basins, Wyoming: Chapter C in Geologic framework for the national assessment of carbon dioxide storage resources

The 2007 Energy Independence and Security Act (Public Law 110-140) directs the U.S. Geological Survey (USGS) to conduct a national assessment of potential geologic storage resources for carbon dioxide (CO 2 ). The methodology used for the national CO 2 assessment is non-economic and intended to be used at regional to subbasinal scales. This report identifies and contains geologic descriptions of twelve storage assessment units (SAUs) in six separate packages of sedimentary rock within the Hanna, Laramie, and Shirley Basins of Wyoming. It focuses on the particular characteristics, specified in the methodology, that influence the potential CO 2 storage resource in those SAUs. Specific descriptions of SAU boundaries as well as their sealing and reservoir units are included. Properties for each SAU, such as depth to top, gross thickness, net porous thickness, porosity, permeability, groundwater quality, and structural reservoir traps are provided to illustrate geologic factors critical to the assessment. Although assessment results are not contained in this report, the geologic information included herein will be employed, as specified in the methodology, to calculate a statistical Monte Carlo-based distribution of potential storage space in the various SAUs. Figures in this report show SAU boundaries and cell maps of well penetrations through the sealing unit into the top of the storage formation. Cell maps show the number of penetrating wells within one square mile and are derived from interpretations of incompletely attributed well data in a digital compilation that is known not to include all drilling. The USGS does not expect to know the location of all wells and cannot guarantee the amount of drilling through specific formations in any given cell shown on cell maps.

Wyoming↗
USGS2019

Assessment of coal mine methane (CMM) and abandoned mine methane (AMM) resource potential of longwall mine panels: example from Northern Appalachian Basin, USA

"Coal mine methane (CMM) and abandoned mine methane (AMM), are by-products of underground coal mining. The quantity and the emission rate of CMM and AMM may vary depending on the type of mine, gas content of the mined coal seam, and gas sourced from strata and coal beds in overlying and underlying formations affected by mining. Therefore, if a mine has the potential of accumulating gas after being abandoned and sealed properly, methane may be produced and used as an energy source to serve to local communities around the mine. Producing AMM also prevents methane, which is a potent greenhouse gas, from leaking to the atmosphere through seals, shaft plugs or surface cracks. One of the technical barriers in front of investments to economical utilization of CMM and AMM is the difficulty to predict how much methane may be available in the gas emission zone (GEZ) as a resource during mining, and after the panels are sealed and the mine is abandoned. Another difficulty is to estimate how much of the potential methane resource can be produced, and its production feasibility with boreholes, such as gob gas ventholes (GGV) converted to capture AMM. In this study, a comparative assessment is presented to address the issues stated above. The assessment was conducted on two adjacent panels of a longwall mine that operated until 2016 in the Pennsylvania section of the Northern Appalachian Basin. The study is based on two approaches that might be used depending on the availability of data, extensive or minimal. The first approach uses an extensive geological data set, geostatistics, and measured shaft gas emission and GGV production values that were collected while the panel(s) were active to assess the AMM resource. The second approach uses a minimal amount of geologic data and its uncertainty as probabilistic distributions as well as predicted during-mining emissions using a publicly available software. Results showed that both approaches provide relatively comparable estimates of AMM resources and AMM recovery potential using wellbores. The differences in assessed quantities are mostly due to the characteristics of the two methods. In that regard, this paper can be considered as guidance to choose the assessment approach based on data availability. "

Northern Appalachian Basin↗
USGS1990

Economic implications of petroleum field size distributions

The unprecedented natural gas price increases in the late 1970's and early 1980's allowed a glimpse of part of the in-situ distribution of natural gas fields that had been hidden by economic truncation. Analysis of those discoveries shows the distribution to be characterized by progressively larger numbers of fields as size category declines. This paper demonstrates the effects of economic truncation for gas fields found in Texas State and Federal offshore areas in the Gulf of Mexico. Economic and policy implications of alternative in-situ field size distribution influence future gas supplies, the associated costs, and petroleum industry activity.

Energy Exploration & Exploitation↗
USGS2012

The macroecology of sustainability

The discipline of sustainability science has emerged in response to concerns of natural and social scientists, policymakers, and lay people about whether the Earth can continue to support human population growth and economic prosperity. Yet, sustainability science has developed largely independently from and with little reference to key ecological principles that govern life on Earth. A macroecological perspective highlights three principles that should be integral to sustainability science: 1) physical conservation laws govern the flows of energy and materials between human systems and the environment, 2) smaller systems are connected by these flows to larger systems in which they are embedded, and 3) global constraints ultimately limit flows at smaller scales. Over the past few decades, decreasing per capita rates of consumption of petroleum, phosphate, agricultural land, fresh water, fish, and wood indicate that the growing human population has surpassed the capacity of the Earth to supply enough of these essential resources to sustain even the current population and level of socioeconomic development.

PLoS Biology↗
USGS2020

A novel approach for next generation water use mapping using Landsat and Sentinel-2 satellite data

Evapotranspiration (ET) is needed in a range of applications in hydrology, climatology, ecology, and agriculture. Remote sensing-based estimation is the only viable and economical method for ET estimation over large areas. The current Landsat satellites provide images every 16 days limiting the ability to capture biophysical changes affecting ET. Thus, we explored the potential integration of Landsat 8 and Sentinel-2 data for estimating ET using a surface energy balance model. The results indicate the proposed Landsat-Sentinel data fusion approach substantially reduced relative errors from 48% to 10% on area-wide and from 49% to 17% on pixel-wide compared to linear interpolation between two Landsat images. The proposed approach had a better agreement with expected actual ET maps across high-vegetation conditions than in low-vegetation conditions. The finer temporal resolution and better accuracy of ET maps based on Landsat-Sentinel integration is of great importance in managing limited water resources.

Arizona, California↗
USGS2004

Petroleum systems succeed play basis in Appalachian basin resource estimate

The US Geological Survey (USGS) periodically conducts subjective probabilistic assessments of the technically recoverable undiscovered hydrocarbon resources of the US and of the world. In addition, the USGS prepares forecasts of that portion of the technically recoverable resources that may be economic under specified conditions of supply, demand, and price. Depending on priorities, regional hydrocarbon assessments of the US are revised every 5 to 10 years. These assessments of undiscovered hydrocarbons supplement the data on hydrocarbon reserves that are reported annually by the US Department of Energy, Energy Information Administration. In between assessments, USGS assessment geologists conduct research and compile geologic and production data that may be used to improve future assessments. This new information commonly effects changes in the way the USGS defines "plays" or "assessment units" from assessment to assessment. Furthermore, USGS assessment methodology is in a constant state of evolution and changes to some degree from assessment to assessment.

Oil & Gas Journal↗
USGS2002

Geothermal systems of the Great Basin and U.S. Geological Survey plans for a regional resource assessment

Based on current projections, the United States faces the need to increase its electrical power generating capacity by 40% (approximately 300,000 Megawatts-electrical or MWe) over the next 20 years (Energy Information Administration, EIA - Department of Energy). A critical question for the near future is the extent to which geothermal resources can contribute to this increasing demand for electricity. Geothermal energy constitutes one of the nation's largest sources of renewable and environmentally benign electrical power, yet the installed capacity of 2860 MWe falls far short of estimated geothermal resources. This is particularly true for the Great Basin region of the western United States, which has an installed capacity of about 500 MWe, much lower than the 7500 MWe resource estimated by the U.S. Geological Survey (USGS) in the late 1970s. The reasons for the limited development of geothermal power are varied, but political, economic and technological developments suggest the time is ripe for a new assessment effort. Technologies for power production from geothermal systems and scientific understanding of geothermal resource occurrence have improved dramatically in recent years. The primary challenges facing geothermal resource studies are (1) understanding the thermal, chemical and mechanical processes that lead to the colocation of high temperatures and high permeabilities necessary for the formation of geothermal systems and (2) developing improved techniques for locating, characterizing and exploiting these systems. Starting in the fall of 2002, the USGS will begin work with institutions funded by the Department of Energy's (DOE) Geothermal Research Program to investigate the nature and extent of geothermal systems in the Great Basin and to produce an updated assessment of available geothermal resources.

Conference Paper↗
USGS1997

The Areal Extent of Continuous Type Gas Accumulations in Lower Silurian Clinton Sands and Medina Group Sandstones of the Appalachian Basin and the Environments Affected by Their Development

In order to best preserve and manage our energy and natural resources we must understand the relationships between these resources and the impacts of their development. To further this understanding the U.S. Geological Survey is studying unconventional continuous-type and, to a lesser extent, conventional oil and gas accumulations and the environmental impacts associated with their development. Continuous-type gas accumulations are generally characterized by low matrix permeabilities, large areal extents, and no distinct water contacts. This basin scale map shows the overall extent of these accumulations and the general land use types that may be impacted by their development. The Appalachian Basin has the longest history of oil and gas exploration and production in the United States. Since Drake's Titusville discovery well was drilled in 1859, oil and gas has been continuously produced in the basin. While there is still a great deal of oil and gas production, new field discoveries are rare and relatively small. For most of the second half of the 20th century the Appalachian basin has been considered a mature petroleum province because most of the large plays have already been discovered and developed. One exception to this trend is the Lower Silurian Clinton Sands and Medina Group Gas play which is being developed in New York, Pennsylvania, and Ohio. This continuous-type gas play has been expanding since the early 1970's (see inset maps). In the 1980's economic incentives such as large increases in wellhead prices further stimulated continuous-type gas resource development. Continuous-type gas plays can be large in areal extent and in thickness. 'Sweetspots' (areas of greater prodcution) are hard to predict and generally associated with better than average permeabilities, and enhanced by natural fracture systems. With an overall success rate often approaching 90%, drilling most of the play with closely spaced wells is often the best way to maximize gas recovery. Some positive economic characteristics associated with the development of these continuous-type accumulations are high success rates, low drilling and development costs, and low water production, which results in low water disposal costs. Large areas within the Appalachian basin with good potential for this type of gas accumulation remain to be tested. Positive environmental characteristics include, a clean energy source, low water production, and relatively low surface impact. Some negative characteristics associated with these continuous -type accumulations are low individual well production rates and small well drainage area. Negative environmental characteristics are primarily related to the dense well spacing used to develop the resource to its full potential. Often negative environmental impacts such as surface disturbance can be greatly reduced. The number of well sites can be decreased by using a single centrally located surface location and associated facilities for several directionally or horizonatally drilled wells. This also minimizes the transportation infrastructure (access roads and pipelines) required to maintain the wells and deliver the gas. Visual impacts can be reduced by selecting well locations visible only over short distances. While the prospective area is large, potential decreases basin- ward and toward the northeast and southwest. These areas are represented by the lower potential plays 6727, 6730, and 6731. The U.S. Geological Survey landuse and landcover data was derived from USGS 1:250,000 and 1:100,000 scale maps. This information was collected between the mid 1970s to mid 1980s. The land use and land cover data was mapped and coded using the Anderson classification system (Anderson, 1975) which is a hierarchical system of general (level 1) to more specific (level 2) characterization. Level 1 characterization was used for this map; the land use and land cover designations are displayed below in the Explanation. T

Open-File Report↗
USGS2015

The role of water in unconventional in situ energy resource extraction technologies

Global trends toward developing new energy resources from lower grade, larger tonnage deposits that are not generally accessible using “conventional” extraction methods involve variations of subsurface in situ extraction techniques including in situ oil shale retorting , hydraulic fracturing of petroleum reservoirs, and in situ recovery of uranium. Although these methods are economically feasible and perhaps result in a smaller above-ground land-use footprint, there remain uncertainties regarding potential subsurface impacts to groundwater. This chapter provides an overview of the role of water in these technologies and the opportunities and challenges for water reuse and recycling.

Book chapter↗
USGS1985

Geologic setting, petrology, and geochemistry of stratiform sphalerite-galena-barite deposits, Red Dog Creek and Drenchwater Creek areas, northwestern Brooks Range, Alaska

Similar stratiform sphalerite-galena-barite deposits occur in the Red Dog Creek area, De Long Mountains quadrangle, and in the Drenchwater Creek area, Howard Pass quadrangle, northwestern Brooks Range, Alaska. The deposits, located approximately 180 km apart, are hosted by Mississippian and Pennsylvanian strata of the Kagvik structural sequence of late Paleozoic and early Mesozoic age. This sequence is situated in the lowermost structural plate of a series of predominantly east-striking, shallow-dipping thrust plates that characterize the regional structure. The deposits occur in shale, tuff, tuffaceous sandstone, altered chert, and quartz exhalite. These units are in places interlayered with or adjacent to bedded or nodular barite or submarine keratophyre flows. Chert and shale commonly contain abundant highly altered, fine-grained feldspar, pumice lapilli, and mafic volcanic rock fragments.The main types of occurrences at Red Dog Creek are: (1) disseminated and stratiform sulfides thinly bedded in organic-rich Mississippian and Pennsylvanian shale and chert, (2) massive sulfide veins and breccia fillings in silicified Mississippian and Pennsylvanian shale, and (3) stratiform sulfide-bearing lenses subdivided into (3a) quartz-exhalite with up to several percent sulfides and barite, (3b) massive sulfide-quartz lenses with up to several percent barite, and (3c) barite-quartz lenses with up to several percent sulfides.At Drenchwater Creek sulfides and barite occur as: (1) disseminations in shale, chert, tuff, and tuffaceous sandstone; (2) disseminations to aggregates in quartz exhalite; and (3) occurrences in veins crosscutting cleavages in brecciated chert and shale.The stratiform sulfides occur in zones up to several thousand meters long and several tens of meters thick. Preliminary grades at Red Dog Creek are 17.1 percent zinc, 5.0 percent lead, and 2.4 oz silver per ton contained in at least 85 million tons.The range of sulfide sulfur isotope values at Red Dog Creek is -16.6 per mil to +3.6 per mil. Sphalerite averages 0.8 per mil. Pyrite is isotopically lighter than coexisting sphalerite in quartz exhalite and massive sulfide lenses. This isotopic relationship is compatible with paragenetic relationships which show pyrite crystallized both earlier and later than other sulfides. Galena is isotopically lighter than coexisting sphalerite. Three groups of geologically and isotopically distinct barites exist including isotopic values appropriate for derivation from late Paleozoic seawater sulfate.Early in the depositional sequence isotopically light pyrite formed from organically reduced seawater sulfate. Sphalerite, galena, late pyrite, and some barite precipitated from two sulfur-bearing solutions that mixed at the mineralization site. Isotopically light barite associated with sulfides precipitated from oxidized H 2 S without seawater sulfate contribution. Lead isotope data from Red Dog and Drenchwater Creeks are compatible with generation of lead in a Phanerozoic mature island-arc setting, a typical orogene, or possibly a back-arc type intracratonic basin.The stratiform sphalerite-galena-barite deposits probably formed in an incipient island-arc environment near a continental margin, containing magmas of keratophyric and andesitic composition, where metal-laden hydrothermal fluids discharged into a deep (?) water, low-energy environment. Later intense deformation, associated with plate docking and thrusting, disrupted and partly remobilized and stratiform deposits.

Alaska↗
USGS2020

Energy and minerals division tight oil and gas committee: Activities and commodity report for 2019-2020

In 2019, total daily tight oil and gas production increased in the United States month over month, with annualized growth of 14% for oil and 12% for gas. Those gains leveled off in the first quarter of 2020 due to aggressive price competition and increases in international production. Then came the pandemic with a substantially larger dose of economic turmoil, driving down demand due in part to shelter in place orders and safety concerns around travel. Between March and May, tight oil and gas production dropped by nearly 2 million bpd and almost 5 Bcf/day before beginning to recover. Production has continued to increase for the most part through the second half of 2020, but drilling remains subdued throughout most of the U.S. and uncertainty around long term demand along with the current price environment and general state of the economy has contributed to layoffs throughout the industry. Some shale-gas production has declined recently, but a few areas have seen expansion due to construction of LNG facilities along the East Coast of the U.S. (e.g., the Haynesville Formation). Current U.S. shale-gas production is still higher now than in 2019, with daily production of almost 71 Bcf as of October 2020 driven in large part by increased production from the Marcellus Shale in the Appalachian Basin and shales within the Permian Basin. Shale liquids production is down by around a million bpd to approximately 7.1 million (September 2020; U.S. EIA) from pre-pandemic production levels at the end of 2019 and beginning of 2020. Tight oil production remains dominated by plays in the Permian Basin as well as the Bakken and Eagle Ford Formations. On the development and production front, new enhanced oil recovery approaches for tight shale reservoirs are being more widely implemented. Natural gas or CO2 injection is currently being utilized in the Bakken Formation, Eagle Ford Formation, Anadarko Basin, and the Permian Basin to optimize injection sequences and boost recovery. Refracturing of existing wells to reduce drilling costs, improve production, and prolong well productive life has also begun to occur more widely in developed plays. International interest in exploiting hydrocarbons from unconventional reservoirs continues to develop, with active exploration projects on most continents. Europe remains relatively underexplored as compared to North America, although a total of 141 exploration and appraisal wells with a possible shale-gas exploration component have been spudded, including horizontal legs from vertical wells. Shale exploration has made a breakthrough in China with shale gas output in 2019 of 10 billion cubic meters (35.3 Bcf), 60% of which was produced from Sinopec’s Fuling Shale Gas field. Lacustrine shale oil exploration has also been successful in the Sichuan and Ordos Basins in central China, Junggar and Tarim Basins in northwest China, and Songliao Basin in north China, and Bohai Bay Basins in northeast China as of 2018. South America’s potential as an unconventional shale gas and oil province is mainly in Argentina and Brazil, where the production from Neuquen Basin’s tight shale of the Vaca Muerta Formation has been steadily increasing since 2016, but only 4% of the shale resource has been developed thus far. According to International Energy Agency’s report in 2013, Brazil holds the 9th largest unconventional gas reserves. Brazil has shale oil and gas potential in the Parana, Solimoes and Amazon Basins and is actively producing from the oil shale unit of the Irati Formation. In 2019, the Brazil energy ministry launched REATE 2020 to boost onshore investments that include the expectation of drilling an experimental unconventional well in the northeast region. For this inaugural report, the new AAPG EMD Tight Oil and Gas Committee (TO&G; formerly the Shale Gas & Liquids and Tight Gas Sands committees) has developed new commodity report requirements for contributors. This includes shorter annual reports focused on new developments, play concepts, along with the typical updates on production and new drilling in the play areas they cover. We are also asking contributors to collect background geologic and production related information into a document that summarizes important features of the plays they cover that will be stored on the TO&G webpage along with our commodity reports. TO&G is currently working to expand the number of contributors to cover more play areas and replace committee and advisory board members that have recently stepped down. Changes to committee leadership occurred in October as recent chairs transition to EMD elected positions.

Activities and Commodities Report↗
USGS2021

Piloting urban ecosystem accounting for the United States

In this study, we develop urban ecosystem accounts in the U.S., using the System of Environmental-Economic Accounting Experimental Ecosystem Accounting (SEEA EEA) framework. Most ecosystem accounts focus on regional and national scales, which are appropriate for many ecosystem services. However, ecosystems provide substantial services in cities, improving quality of life and contributing to resiliency for substantial parts of the population. Our models estimate energy savings for indoor cooling resulting from heat mitigated by trees and rainfall intercepted by trees. Both models cover major cities in the contiguous U.S. and report the results through physical supply and use tables for multiple accounting periods (2011 and 2016). Using conservative assumptions, urban trees provide substantial heat mitigation (4,098 and 4,229 GWh, valued at $523 and $539 million in 2011 and 2016, respectively) and rainfall interception (2,422 and 2,627 million m 3 , valued at $434 and $425 million for 2011 and 2016, respectively). Interannual differences largely reflect variations in weather patterns. Our work shows how Earth observation data can support urban ecosystem accounting. We provide model code within a public repository to facilitate model runs elsewhere, enabling the SEEA EEA and Earth observation user communities to reuse our models and provide feedback for improvement.

Ecosystem Services↗
USGS2014

The rare-earth elements: Vital to modern technologies and lifestyles

Until recently, the rare-earth elements (REEs) were familiar to a relatively small number of people, such as chemists, geologists, specialized materials scientists, and engineers. In the 21st century, the REEs have gained visibility through many media outlets because of (1) the public has recognized the critical, specialized properties that REEs contribute to modern technology, as well as (2) China's dominance in production and supply of the REEs and (3) international dependence on China for the majority of the world's REE supply. Since the late 1990s, China has provided 85–95 percent of the world’s REEs. In 2010, China announced their intention to reduce REE exports. During this timeframe, REE use increased substantially. REEs are used as components in high technology devices, including smart phones, digital cameras, computer hard disks, fluorescent and light-emitting-diode (LED) lights, flat screen televisions, computer monitors, and electronic displays. Large quantities of some REEs are used in clean energy and defense technologies. Because of the many important uses of REEs, nations dependent on new technologies, such as Japan, the United States, and members of the European Union, reacted with great concern to China’s intent to reduce its REE exports. Consequently, exploration activities intent on discovering economic deposits of REEs and bringing them into production have increased.

Fact Sheet↗