USGS Science⌕ Search

SEARCH · USGS Science

Results for “Tectonics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100Linked to original sources
USGS2018

Against the current— The Mojave River from sink to source: The 2018 Desert Symposium field trip road log

The Mojave River evolved over the past few million years by “fill and spill” from upper basins near its source in the Transverse Ranges to lower basins. Each newly “spilled into” basin in the series? sustained a long-lived lake but gradually filled with Mojave River sediment, leading to spill to a yet lower elevation? basin. The Mojave River currently terminates at Silver Lake, near Baker, CA, but previously overflowed this terminus onward to Lake Manly in Death Valley during the last glacial cycle. The river’s origin and evolution are intricately interwoven with tectonic, climatic, and geomorphic processes through time, beginning with San Andreas fault interactions that created a mountain range across a former externally draining river. We will see and discuss the Mojave River’s predecessor streams and basins, its evolution as it lengthened to reach the central Mojave Desert, local and regional tectonic controls, groundwater flow, flood history, and support of isolated perennial stream reaches that host endemic species. In association with these subjects are supporting studies such as paleoclimate records, location and timing for groundwater and wetlands in the central Mojave Desert, and effects of modern water usage. The trip introduces new findings for the groundwater basin of Hinkley Valley, including an ongoing remediation project that provides a wealth of information on past and present river flow and associated development of the groundwater system.

California↗
USGS1983

Conodonts of the western Paleozoic and Triassic belt, Klamath Mountains, California and Oregon

Conodonts were extracted from 32 samples of limestone and 5 samples of chert obtained from the Western Paleozoic and Triassic belt of the Klamath Mountains province. Triassic conodonts were found in 17 samples, and late Paleozoic conodonts in 7 samples. Conodonts of the remaining 13 samples cannot be dated more closely than early or middle Paleozoic through Triassic. The late Paleozoic conodonts are restricted to the North Fork and Hayfork terranes. The Hayfork terrane also contains Early, Middle, and Late Triassic conodonts; mostly Neogondolella. Conodonts from samples of the Rattlesnake Creek terrane and the northern undivided part of the belt are all Late Triassic and are generally Epigondolella. The conodont data support the concept that many of the limestone bodies are olistoliths or tectonic blocks in melange. Color alteration of the conodonts indicates that the rocks of the Western Paleozoic and Triassic belt have been heated to temperatures between 300 degrees and 500 degrees C during regional tectonism.

California, Oregon↗
USGS2018

Thermally induced fracture of macroscale surficial granite sheets

Geologically diverse landforms around the world show indications of energetic macroscale fracture. These fractures are sometimes displayed dramatically as so-called “A-tents”, whereby relatively thin rock sheets push upwards and fracture, forming tent-like voids beneath the ruptured sheets. The origin and formation of such features has been a topic of considerable interest and analysis for over a century. Here we show that thermally-induced stresses, coincident with particularly hot days during particularly hot years, were responsible for recent (2014-2016) energetic ruptures of rock sheets forming a granitic exfoliation dome in California, USA. Through a three-year field effort, we found that subcritical fracture occurred due to diurnal and seasonal cumulative thermal stresses. However, our analyses also indicate that subsequent critical fracture could only have been reached if thermal stresses acted in concert with existing tectonic stresses. Thus, we offer a superposition triggering mechanism (background tectonic stresses with cyclic thermal stresses) to explain these rock fracture features.

Conference Paper↗
USGS2019

In situ distributions of magnetic susceptibility in some igneous rocks

Measurements of in-situ magnetic susceptibility were compiled from mainly Precambrian crystalline basement rocks beneath the Colorado Plateau and ranges in Arizona, Colorado, and New Mexico. The susceptibility meter used samples about 33 cubic centimeters of rock and measures variations in the modal distribution of magnetic minerals that form a minor component volumetrically in these coarsely crystalline granitic to granodioritic rocks. Recent measurements include 50-150 measurements on each outcrop and show that the distribution of magnetic susceptibilities is highly variable, multimodal and strongly non-Gaussian so that a mean value has little significance. Rock bodies with the most multimodal distributions generally have complex tectonic histories including metamorphism and multiple tectonic events. Variations between outcrops within the same rock body are large; however, where distributions overlap, measurements appear to fill gaps within modal peaks. Histograms of measurements are a better representation of the magnetic susceptibility distribution for a given rock body than mean and standard deviation. The best effective magnetic susceptibility estimate for an outcrop can be obtained by computing themagnetic force of the measurements 3-5 m above the outcrop and finding the constant susceptibility that gives an equal integral of the force. The multifractal distribution of the minor minerals in the rocks explains the observed multimodal distributions of magnetic susceptibility at millimeter to meter scales.

Arizona, Colorado, New Mexico↗
USGS2019

Lithologies, ages, and provenance of clasts in the Ordovician Fincastle Conglomerate, Botetourt County, Virginia, USA

The Fincastle Conglomerate is an Ordovician polymictic, poorly sorted, matrix- and clast-supported cobble to boulder-rich conglomerate located just north of Fincastle, Botetourt County, VA. At least nine other cobble and boulder conglomerates are located in a similar stratigraphic position from Virginia to Georgia west of the Blue Ridge structural front. All except the Fincastle are dominated (~80%) by carbonate clasts; Fincastle clasts are much more varied and siliceous and it is this clast diversity that provides increased value for provenance and related studies. We have used a multidisciplinary approach that involves conodont analysis, sandstone petrography, in-situ outcrop clast characterization, optical petrography, electron-beam petrography and chemical analysis, and X-ray diffraction to provide data on lithologies, ages, and provenance. The size, roundness, and lithology of 1,656 clasts (> 1 cm) were measured in the field. Although, the clast lithology varies among the studied localities, the average lithology is sandstone and siltstone 12 %, vein quartz 17 %, limestone 31 %, low-grade quartzite/metasandstone 31 %, chert 6 %, and others 3 %. Dolomite, igneous, or high-grademetamorphic rock clastswere not identified in field study or in detailed laboratory analysis.Dolomite rhombs and authigenic albite feldsparwere observed in some limestone clasts. Quantitative petrographic data for the Fincastle sandstone clasts indicate tectonic environments from passive margin to transitional continental uplift, but the conglomeratematrixmodes have considerably less feldspar and plot in the foreland basin tectonic environment region. Proto-, para-, and euconodonts were identified from clast and matrix, but are long-ranging fauna indicating middle Cambrian toMiddle or Late Ordovician ages; color alteration index (CAI) for euconodonts varied from 3 to 3.5. The occurrence of well-rounded clasts including limestone suggests a nearby, high-energy environment, and that transport was rapid enough to preserve limestone before deposition into a foreland basin. The lack of igneous or high-grade metamorphic rocks clasts suggests that the erosional level sampled by the Fincastle Conglomerate did not include the underlying Grenville basement of igneous or high-grade metamorphic rocks.

Virginia↗
USGS1969

Model for simulation of residual stress in rock

Rocks in mines, quarries, and many outcrops commonly show evidence of being under high stress. Saw cuts and drillholes close in, partly mined coal bursts violently, and pillars crush and rock spalls in mines even at moderate depths. Similarly, strong and massive rocks such as granite and sandstone naturally divide themselves into sheets that lie more or less parallel to their outward topographic form. The sheets may be either convex or concave. Thin plates of bare rock surfaces bow up and buckle. Such effects often cannot be explained by the obvious loads now acting on the rock, that is, by loads resulting from overburden, topographic irregularities, or stress concentration around openings. The stresses exceed those that would result from such loads. Two interpretations of such excess stresses have been made. In one, the stresses are assigned in origin to now active tectonic forces. In the other, they are regarded as leftover and locked in from some previous state at which higher pressures prevailed. These two sources may both operate and they generally cannot be distinguished easily in the field. There are other complicating sources of stress such as temperature gradients and chemical alteration. Nevertheless, some bodies of rock, by exfoliating, show evidence of high internal stress even though they are practically unweathered and so isolated topographically that the presence in them of significant stress due to exterior loads or active tectonic forces seems unlikely. Moreover, completely isolated rocks are known to change density shape, or size; to expand under constant compressive stress; and even to disintegrate without the intervention of weathering processes. The stresses involved here must be truly residual in the sense long used by metallurgists; that is, residual stresses in a body are those that remain, aside from the effect of gravity or temperature gradients, even after the boundaries are freed from loads. Residual stress within rock can exist only in a system of internally balanced forces. The existence of such balanced forces has been recognized for a long time--at least 180 years--to judge from an incomplete survey of the literature. Discussions have been presented more recently by Voight, Friedman, Emery, Price, Denkhaus, Kieslinger, and other engineers and geologists. Briefly, a simple version of the concept is that if a granite crystallizes at depth and is then unloaded by uplift and erosion, the compressed mineral grains cannot completely relax, owing to interlocking boundaries and mutual interference. A sandstone that becomes cemented while constituent grains are under high pressure cannot completely relax when cut free. Thus, a balance is achieved between forces of expansion in the interior of the crystalline grains and those of restraint at grain boundaries or in the cement.

Conference Paper↗
USGS1969

Theoretical basis of the borehole deepening method of absolute stress measurement

Knowledge of the initial state of stress in rocks provides a key to the solution of many problems in rock mechanics. The initial state of stress is part of the basic data required for rational design of structures in rock, since its redistribution when engineering activities are conducted is a primary load on the rock portion of the engineering system. Knowledge of initial and subsequent changes in the state of stress is also relevant in the study of active faults and crustal strain. The purposes of stress measurements are not generally well served by methods which disclose only one of the stress components at a point. Recently, interest has centered on overcoring methods which though expensive and difficult have the important advantage of yielding data on three or more stress components. In a previous paper, the authors introduced a new method--termed borehole deepening--based on measurement of the deformations that occur close to the bottom of a borehole when it is deepened by further drilling without overcoring . The proposed method is at a disadvantage when compared with overcoring procedures in that the quantities to be measured are somewhat smaller and the measuring environment is more hostile. However, the borehole deepening method presents three distinct advantages in comparison with overcoring procedures: (1) Using the same borehole, both the initial and the subsequent changes in the state of stress can be obtained by borehole deepening. Stress changes with time are very significant for stability monitoring as well as in predicting earthquake activity in regions close to known active faults and volcanoes. (2) The necessity of completely unloading a portion of the rock mass where deformation measurements are being carried out in the overcoring methods is ill-suited to nonlinearly elastic materials such as rocks. The borehole deepening method, on the other hand, is based on a change of stress from one level to another, rather than complete strain relief and is therefore less affected by nonlinear behavior. (3) Numerous stress measurements can be carried out economically in a single borehole. Thus, the regional stress distribution can be more readily obtained. Such information is considerably more significant than a single stress measurement at a point; considering the variability of rock masses and the magnitudes and direction of the stresses acting on them from one region to another and within the regions themselves, the reliability of a single measurement when extrapolated for the entire region is not very reasonable. This advantage of more numerous measurements makes it possible to predetermine the initial state of stress with confidence before actual access and construction. It also makes it possible to consider studying regional tectonic systems. Integrated regional measurements of in-situ state of stress would provide the necessary information for plotting the variation of crustal stresses; this would be of great interest in evaluating the several theories of orogenesis and in delineating tectonically active regions. This chapter is concerned with the theoretical basis for the borehole deepening method--the "software" for converting deformation measurements into stress values.

Conference Paper↗
USGS2020

Mapping, exploration, and characterization of the California continental margin and associated features from the California-Oregon border to Ensenada, Mexico

Priority Geographic Area: Both within and outside US Exclusive Economic Zone (EEZ). California continental margin. This area includes and continues south of the geographic area captured in the Watt et al. white paper. Description of Priority Area: The California continental margin, from the narrow shelf to abyssal depths, contains diverse seafloor features that influence benthic community types, biological connectivity, and is associated with significant seafloor geohazards. These complex features include marginal basins, depositional slopes, submarine canyons, ridges, and seamounts, and seep environments as a result of fluid seeps along active faults. Water column characteristics are variable, with steep gradients in current velocities, which influence sediment transport, from depositional fans (slow flow, muddy) to submarine canyons and seamounts (high currents, rocky, rugged terrain). These features and associated environments can influence the distribution of deep-sea habitats, including coral and sponge communities. South of the region described in the Watt et al. and Demopoulos et al. white papers, plentiful seeps occur from northern California down to the southern California Borderland. However, the underlying foundational geology associated with these seeps varies along the margin, changing with contrasting tectonic settings, from convergent tectonics to regions dominated by strike-slip faulting (Barry et al. 1996; Paull et al. 2008; Bernardo and Smith 2010; Maloney et al. 2015). For seeps located off southern California, the relationship to strike-slip fault systems may influence the distribution of seep fluid expulsion sites and associated seep habitats (Maloney et al. 2015; Grupe et al. 2015; Conrad et al., 2017), where transpression plays a key role in formation and localization of fluid seeps. Further exploration is required in order to understand these connections. Several submarine canyons intersect the shelf within this region, serving as important channels of energy and transport of sediment from shelf to slope depths. Canyons are typically associated with high currents, turbidity flows, steep and rugged terrain, and high food availability, all of which structures canyon communities and supports hotspots of biodiversity. Specific canyons along the California margin that have been well studied include Scripps and La Jolla Canyons off San Diego, and Monterey Canyon off Monterey, but many more remain relatively unexplored. Commercially important species of fish and invertebrates have been found associated with canyons, as well as deep-sea corals and sponges (e.g., Barry et al. 1996). However, in contrast to their Atlantic counterparts (e.g., through ACUMEN and ASPIRE campaigns) there has been a dearth of exploration and characterization of canyons along the California margin. A number of questions remain regarding canyon and slope wall stability and associated geohazards, plus, how the canyons connect and influence the broader regional biogeography of benthic communities is unknown. Due to their topography, seamounts along the California margin are characterized by steep slopes, large areas of rocky substrate, and high currents. Hydrological complexity is associated with seamounts given they impinge different watermasses, depending on depth range. This heterogeneity yields complex and diverse benthic communities, including commercially important fishes (e.g., Tracey et al., 2012). The geology of Davidson, Pioneer, San Juan, and Rodriquez Seamounts has received considerable study (e.g., Davis et al., 2010) but other seamounts are less known, including how they are biologically and ecologically connected. For example, research comparing the benthic communities associated with Rodriguez and San Juan Seamounts, located outside of the Channel Islands National Marine Sanctuary and within the proposed Chumash Heritage National Marine Sanctuary, to communities found within the sanctuary is critical for managing and protecting resources within the sanctuary and modifying sanctuary boundaries. Exploration would yield the data needed to delineate and characterize essential fish habitats, and deep-sea coral and sponge communities, thus directly connecting the utility of exploration and discovery to decision making. The southern California Borderland is a geomorphologically heterogeneous area created by a complex network of faults, containing deep basins separated by shallow ridges and islands. Persistent fault-related deformation has created complex features, such as exposure of scarps and uplift rocks/ridges, seeps, erosional terraces, hydrate mounds, and mud volcanoes that provide support for thriving benthic communities. That said, significant oxygen minimum zones and low aragonite saturation states persist within several of the basin environments, influencing energy flow, community ecology, and calcification. For example, the combined effects of hypoxia and acidification pose serious threats to marine organisms and biological resources along the California margin. Mapping and exploration of the extensive faults and fault scarps can help constrain historical earthquake activity. But many questions remain regarding how the underlying geology and geological processes have shaped the biological communities.

California↗
USGS1978

Chemistry of Tertiary volcanic rocks in the Eldorado Mountains, Clark County, Nevada, and comparisons with rocks from some nearby areas

Chemical variations of 27 rocks that erupted from in and near the Eldorado Mountains, southern Nevada, show (1) fair to good correlation suggestive of a cogenetic suite, (2) a range of uncorrected silica values from about 48 to 74 weight percent with no strong tendency toward bimodality, (3) a calc-alkaline characteristic, and (4) a shift from early eruptions having an anomalously low level of iron enrichment to later eruptions having a more normal level of iron enrichment. Analyses of rocks not known to have been erupted from the Eldorado Mountains (for example, five analyses of the tuff of Bridge Spring and two analyses of the Fortification Basalt Member of the Muddy Creek Formation) are not anomalous when compared with the other rocks, except that iron concentration in the Fortification Basalt Member may be higher than normal. Extensive K-Ar age data provide a clear time framework for the chemical changes as well as for the structural history of the area. The inception of intense extensional tectonism about 15 million years ago was marked by an abrupt shift to more iron-rich and more typically calc-alkalic volcanic products (Mount Davis Volcanics) than those erupted earlier (Patsy Mine Volcanics), but no corresponding shift in K 2 O or total alkali contents or ratios is recognized nor is there any obvious shift toward bimodality in rocks younger than 15 million years. These data, together with data from the Oatman district of Arizona, 100 kilometers to the south-southeast, indicate that the northern part of the lower Colorado River area does not fit into the published Cenozoic patterns of volcanic and tectonic evolution of the western United States. A brief review of nearby areas indicates that they may not fit well either.

Nevada↗
USGS2024

Characterizing structure in southern Summer Lake valley, Oregon using ground- and sUAS-based potential field geophysics

Summer Lake is located in south-central Oregon at the extreme northwestern extent of the Basin and Range Province, bordered by the Cascade Volcanic Province to the west and the High Lava Plains to the north. The valley hosts numerous hot springs and a small geothermal powerplant at the southeastern end of the valley in the town of Paisley. This tectonically active region has undergone significant ENE-directed extension producing highly faulted terrain with fault blocks tilting on average 60° from the maximum extension direction. Local geology consists of young volcanics which have been extensively dissected by predominantly NNW-trending normal faults. These same structures likely extend through the basin but are concealed by young basin fill sediments and volcanics. As a result, potential field geophysical methods are ideally suited for characterizing subsurface geology and structures in this region which are important for understanding basin evolution and tectonics within the valley. New ground-based gravity and magnetic data, as well as sUAS- (small uncrewed aerial systems) based magnetic data reveal a prevalent NNW-trending fabric beneath the basin fill in southern Summer Lake valley that likely plays an important role in controlling the flow of subsurface hydrothermal fluids. Additionally, measurements were performed on outcrops, hand samples and paleomagnetic cores to constrain the physical properties (density, magnetic susceptibility and magnetic remanence) of local geology. Together, these data help resolve basin geometry and delineate concealed faults and contacts, informing our understanding of the structural framework and geothermal resource potential of southern Summer Lake valley.

Oregon↗
USGS2025

Preliminary depth to basement modeling at Salton Sea, California

The San Andreas Fault – Imperial Fault (SAF-IF) transtensional step-over zone along the southern margin of the Salton Sea hosts substantial geothermal production and lithium brine resources. Recent volcanism at the Salton Buttes and active seismicity along the SAFIF fault system highlight active tectonic and magmatic processes that pose natural hazards and may impact energy and mineral production. Characterizing the subsurface architecture and extent of concealed alteration associated with this tectono-magmatic system enhances understanding of these active processes, associated hazards, and resources. We have compiled a gravity database, consisting of new and re-processed existing data, from which we have constructed a new isostatic residual gravity anomaly map of the Salton trough. We have used this new gravity dataset together with a compilation of publicly available borehole data to develop new depth to basement inversion models for the region. These depth to basement models help to constrain basin geometries, inform alteration mapping, and reveal variations in basement rocks. Due to the concealed nature of the complex tectonic framework at the Salton trough, it is necessary to utilize geophysical methods for subsurface characterization. These new depth to basement models are a first step toward constructing 2D and 3D geophysical and geologic models of the Imperial Valley and Salton Sea geothermal area. This analysis complements other geophysical initiatives, including magnetotelluric (MT) modeling (Tokmakoff et al., 2024), magnetic mapping (Glen and Earney, 2023, 2024) and potential field modeling, and seismic studies focused on hazard and resource investigations in the Imperial Valley.

California↗
USGS2025

Fingerprinting magmatic REE deposit sources with zircon petrochronology

Carbonatites and associated alkaline silicate rocks are of considerable economic interest due to their enrichments in rare earth elements. The petrogenesis and source(s) of these complexes, however, are poorly understood. Models propose either mantle plume-derived carbon-rich melts or a mantle source enriched by subduction-related metasomatism. We use zircon trace elements to fingerprint carbonatite-alkaline complex sources, focusing on the economically significant 1.4 Ga Mountain Pass intrusive suite (MPIS). Autocrystic zircon from MPIS alkaline silicate rocks are enriched in Th and U relative to Nb suggesting a subduction influenced, oxidized source region. Lower Sc/Yb, higher Ti concentrations, and the absence of Eu anomalies in autocrystic zircon suggest derivation from a less hydrous, hotter, and deeper mantle source relative to arc-related 1.8–1.6 Ga inherited zircon. These data are best explained by syn- to post-collisional Mesoproterozoic reactivation of a subduction-metasomatized mantle source. The source and tectonic setting of the MPIS contrasts with Mesoproterozoic Gifford Creek and Bayan Obo carbonatites which exhibit plume-like compositions and are associated with rifts, suggesting different sources and tectonic settings for these economically significant deposits. We demonstrate that zircon petrochronology is a robust method for distinguishing carbonatite sources and can inform more targeted exploration strategies for critical mineral resources.

Conference Paper↗
USGS2026

In-situ geochronology using LA-ICP-MS/MS: Application of the Lu-Hf system in carbonate, apatite and fluorite

Geochronology is a fundamental tool for reconstructing earth history and constraining the timing of ore deposit formation. Traditionally, U-rich minerals like zircon, titanite, monazite and apatite have been analysed to determine the timing of mineralization and alteration events. However, not all deposits or alteration assemblages contain these minerals, and the U-Pb system can be disturbed due to open system behaviour. We present a methodology for obtaining in-situ Lu-Hf dates from various minerals to demonstrate the potential for dating ore deposits that lack U-rich minerals. Carbonate, apatite and fluorite minerals from different tectonic settings and geological environments were analysed. We acquired Lu-Hf and REE (rare earth element) data from carbonate minerals from a carbonatite orebody and dike samples from the Mountain Pass REE carbonatite deposit in California, USA. We also tested a ‘double-dating’ method, where U-Th-Pb dates and Lu-Hf dates were obtained from the same analysis of apatite from rocks in the Michigan’s Great Lakes Tectonic Zone. Preliminary results for Lu-Hf dating of fluorite from carbonatite rocks in the Lemitar Mountains of New Mexico are also included. The analytical methodology shows promising results in each of these cases where there is sufficient parent Lu and U and measurable daughter Hf and Pb respectively.

Conference Paper↗
USGS2025

Mappable criteria for Li-mineralized pegmatites in the Appalachian orogen (utilizing the mineral systems approach)

Li-mineralized pegmatites are found throughout the Appalachian orogenic belt. Available evidence layers (e.g. tectonic setting, structures, geochemistry, geochronology) are used to develop mappable criteria for mineral resource assessments of Li-mineralized pegmatites in the northern and southern U.S. Appalachians. These evidence layers are placed into a mineral systems anatomy and classification of tectonic settings approach. We find that triggers of Li-mineralized pegmatite petrogenesis are closely associated with terrane accretion, continental collision, and orogenic collapse, spanning the Acadian to Alleghanian orogenies. These include overthickened crust in the northern Appalachians (Acadian altiplano) and terrane accretion in the southern Appalachians. The energy drivers of the system are anatexis broadly plutonism and/or deformation-related melting processes. Metal sources are associated with magmatic fluids of highly differentiated granitoids (e.g. peraluminous, S-type) and Silurian- Devonian sedimentary rocks. In many instances permeability and pathways of these systems are structurally controlled along major fault systems and within highly deformed metasedimentary rocks in the north. Notably, there are Li-mineralized pegmatite gaps along the Appalachian orogen that include: 1) regions of exposure of unfavorable metamorphic grade rocks, 2) favorable areas deeply buried by sedimentary rocks, and 3) gaps of unknown causes. Exhumation and preservation of midcrustal rocks are favourable as hosts to lithiummineralized pegmatites.

southern Appalachian mineral resourse assessment a↗
USGS2014

Subsurface geometry of the San Andreas-Calaveras fault junction: Influence of serpentinite and the Coast Range Ophiolite

While an enormous amount of research has been focused on trying to understand the geologic history and neotectonics of the San Andreas-Calaveras fault (SAF-CF) junction, fundamental questions concerning fault geometry and mechanisms for slip transfer through the junction remain. We use potential-field, geologic, geodetic, and seismicity data to investigate the 3-D geologic framework of the SAF-CF junction and identify potential slip-transferring structures within the junction. Geophysical evidence suggests that the San Andreas and Calaveras fault zones dip away from each other within the northern portion of the junction, bounding a triangular-shaped wedge of crust in cross section. This wedge changes shape to the south as fault geometries change and fault activity shifts between fault strands, particularly along the Calaveras fault zone (CFZ). Potential-field modeling and relocated seismicity suggest that the Paicines and San Benito strands of the CFZ dip 65° to 70° NE and form the southwest boundary of a folded 1 to 3 km thick tabular body of Coast Range Ophiolite (CRO) within the Vallecitos syncline. We identify and characterize two steeply dipping, seismically active cross structures within the junction that are associated with serpentinite in the subsurface. The architecture of the SAF-CF junction presented in this study may help explain fault-normal motions currently observed in geodetic data and help constrain the seismic hazard. The abundance of serpentinite and related CRO in the subsurface is a significant discovery that not only helps constrain the geometry of structures but may also help explain fault behavior and the tectonic evolution of the SAF-CF junction.

California↗
USGS2015

Eocene and Miocene extension, meteoric fluid infiltration, and core complex formation in the Great Basin (Raft River Mountains, Utah)

Metamorphic core complexes (MCCs) in the North American Cordillera reflect the effects of lithospheric extension and contribute to crustal adjustments both during and after a protracted subduction history along the Pacific plate margin. While the Miocene-to-recent history of most MCCs in the Great Basin, including the Raft River-Albion-Grouse Creek MCC, is well documented, early Cenozoic tectonic fabrics are commonly severely overprinted. We present stable isotope, geochronological ( 40 Ar/ 39 Ar), and microstructural data from the Raft River detachment shear zone. Hydrogen isotope ratios of syntectonic white mica ( δ 2 H ms ) from mylonitic quartzite within the shear zone are very low (−90‰ to −154‰, Vienna SMOW) and result from multiphase synkinematic interaction with surface-derived fluids. 40 Ar/ 39 Ar geochronology reveals Eocene (re)crystallization of white mica with δ 2 H ms ≥ −154‰ in quartzite mylonite of the western segment of the detachment system. These δ 2 H ms values are distinctively lower than in localities farther east ( δ 2 H ms ≥ −125‰), where 40 Ar/ 39 Ar geochronological data indicate Miocene (18–15 Ma) extensional shearing and mylonitic fabric formation. These data indicate that very low δ 2 H surface-derived fluids penetrated the brittle-ductile transition as early as the mid-Eocene during a first phase of exhumation along a detachment rooted to the east. In the eastern part of the core complex, prominent top-to-the-east ductile shearing, mid-Miocene 40 Ar/ 39 Ar ages, and higher δ 2 H values of recrystallized white mica, indicate Miocene structural and isotopic overprinting of Eocene fabrics.

Utah↗
USGS1998

Remagnetization of Cretaceous forearc strata on Santa Margarita and Magdalena Islands, Baja California Sur: Implications for northward transport along the California margin

Paleomagnetic data for two sections of Cretaceous forearc strata with different structural attitudes on Santa Margarita and Magdalena Islands in Baja California Sur, Mexico, indicate that these rocks have been remagnetized, probably during the late Cenozoic. The in situ paleomagnetic directions, however, are similar to data from other Cretaceous rocks on peninsular California with unexpectedly shallow inclinations and easterly declinations. These data have been interpreted as indicating either northward tectonic transport (10°–15° of latitude) and clockwise rotation (>20°) or compaction shallowing of magnetic inclinations in sedimentary rocks combined with southwestward tilting of plutonic rocks. The available paleomagnetic data for Cretaceous forearc strata in southern and Baja California can be divided into three groups: (1) sections with normal-polarity magnetizations that fail fold tests and are remagnetized, (2) sections with normal-polarity magnetizations with no or inconclusive fold tests that may or may not be remagnetized, and (3) sections with both normal-and reversed-polarity intervals where pervasive remagnetization has not occurred. Other rocks of the Mesozoic Great Valley Group, Coast Range ophiolite, and Franciscan Complex in California also have secondary magnetizations with directions similar to younger geomagnetic field directions. Although these widespread remagnetizations could have variable local causes, we propose regional burial and uplift, related to changes in subduction parameters, as a possible explanation. Two episodes of remagnetization are apparent: one in the Late Cretaceous and a second in the late Cenozoic. On the other hand, the unremagnetized and apparently reliable data from sedimentary and plutonic rocks on the Baja Peninsula consistently indicate northward translation (14° ± 3°) and clockwise rotation (29° ± 8°) with respect to North America since the Late Cretaceous.

California↗
USGS2004

Assembly of the Pamirs: Age and origin of magmatic belts from the southern Tien Shan to the southern Pamirs and their relation to Tibet

Magmatic rocks and depositional setting of associated volcaniclastic strata along a north-south traverse spanning the southern Tien Shan and eastern Pamirs of Kyrgyzstan and Tajikistan constrain the tectonics of the Pamirs and Tibet. The northern Pamirs and northwestern Tibet contain the north facing Kunlun suture, the south facing Jinsha suture, and the intervening Carboniferous to Triassic Karakul-Mazar subduction accretion system; the latter is correlated with the Songpan-Garze-Hoh Xi system of Tibet. The Kunlun arc is a composite early Paleozoic to late Paleozoic-Triassic arc. Arc formation in the Pamirs is characterized by ???370-320 Ma volcanism that probably continued until the Triassic. The cryptic Tanymas suture of the southern northern Pamirs is part of the Jinsha suture. A massive ??????227 Ma batholith stitches the Karakul-Mazar complex in the Pamirs. There are striking similarities between the Qiangtang block in the Pamirs and Tibet. Like Tibet, the regional structure of the Pamirs is an anticlinorium that includes the Muskol and Sares domes. Like Tibet, the metamorphic rocks in these domes are equivalents to the Karakul-Mazar-Songpan-Garze system. Granitoids intruding the Qiangtang block yield ???200-230 Ma ages in the Pamirs and in central Tibet. The stratigraphy of the eastern Pshart area in the Pamirs is similar to the Bangong-Nujiang suture zone in the Amdo region of eastern central Tibet, but a Triassic ocean basin sequence is preserved in the Pamirs. Arc-type granitoids that intruded into the eastern Pshart oceanic-basin-arc sequence (???190-160 Ma) and granitoids that cut the southern Qiangtang block (???170-160 Ma) constitute the Rushan-Pshart arc. Cretaceous plutons that intruded the central and southern Pamirs record a long-lasting magmatic history. Their zircons and those from late Miocene xenoliths show that the most distinct magmatic events were Cambro-Ordovician (???410-575 Ma), Triassic (???210-250 Ma; likely due to subduction along the Jinsha suture), Middle Jurassic (???147-195 Ma; subduction along Rushan-Pshart suture), and mainly Cretaceous. Middle and Late Cretaceous magmatism may reflect arc activity in Asia prior to the accretion of the Karakoram block and flat-slab subduction along the Shyok suture north of the Kohistan-Ladakh arc, respectively. Before India and Asia collided, the Pamir region from the Indus-Yarlung to the Jinsha suture was an Andean-style plate margin. Our analysis suggests a relatively simple crustal structure for the Pamirs and Tibet. From the Kunlun arc in the north to the southern Qiangtang block in the south the Pamirs and Tibet likely have a dominantly sedimentary crust, characterized by Karakul-Mazar-Songpan-Garze accretionary wedge rocks. The crust south of the southern Qiangtang block is likely of granodioritic composition, reflecting long-lived subduction, arc formation, and Cretaceous-Cenozoic underthrusting. Copyright 2004 by the American Geophysical Union.

Tectonics↗

Refine your search to explore more results.