USGS Science⌕ Search

SEARCH · USGS Science

Results for “The Leading Edge”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10Linked to original sources
USGS2003

Offset vertical radar profiling

Diffraction tomography imaging was applied to VRP data acquired by vertically moving a receiving antenna in a number of wells. This procedure simulated a vertical downhole receiver array. Similarly, a transmitting antenna was sequentially moved along a series of radial lines extending outward from the receiver wells. This provided a sequence of multistatic data sets and, from each data set, a two-dimensional vertical cross-sectional image of spatial variations in wave speed was reconstructed.

Leading Edge (Tulsa, OK)↗
USGS2003

New and unique U.S. magnetic database is forthcoming

A n exciting and cost-effective opportunity to acquire a new U.S. magnetic anomaly database exists in calendar year 2004. High Altitude Mapping Missions Incorporated (HAMM) is currently planning an airborne mission to collect high-resolution Interferometric Synthetic Aperture Radar (IFSAR) imagery at an altitude of about 15 km, with a flight-line spacing of about 14 km over the conterminous United States and Alaska. Total and vector magnetic field data will also be collected as a secondary mission objective (i.e., a “piggy-back” magnetometer system). Because HAMM would fund the main flight costs of the mission, the geomagnetic community would acquire invaluable magnetic data at a nominal cost. These unique data should provide new insights on fundamental tectonic and thermal processes and give a new view of the structural and lithologic framework of continental areas and offshore regions.

Leading Edge (Tulsa, OK)↗
USGS2005

4D seismic to image a thin carbonate reservoir during a miscible CO2 flood: Hall-Gurney Field, Kansas, USA

Time-lapse (TL) seismic monitoring has proven a valuable tool for reservoir management. If available in a timely and cost-effective manner, it can be incorporated into a dynamic reservoir management approach, spec-ifically in terms of assessing sweep efficiency through constraining reservoir simulations, quantifying compartmentalization, and enhancing the placement of infill wells. Thus, cost-effectiveness, rapid turnaround time, and sensitivity of the seismic response to subtle changes in reservoir properties evident in production data are critical assets of a robust and economic TL application. Successful applications of TL monitoring have been predominantly offshore—Gulf of Mexico and North Sea—in thick clastic reservoirs characterized as low technical risk. Changes in TL seismic images as a direct result of enhanced oil recovery operations in low compressibility, “stiff” carbonate reservoirs are so small that distinguishing reservoir fluid changes from background noise on seismic attribute maps is challenging at best and many times impossible. Consequently, reservoirs predicted to produce weak TL anomalies associated with enhanced oil recovery (EOR) operations are classified as high-risk cases and languish in what has been designated the “stretch portfolio” of time-lapse application in reservoir management.

Kansas↗
USGS2005

Underwater MASW to evaluate stiffness of water-bottom sediments

Stiffness measurements are often necessary for geotechnical characterization of an underwater site. Seismically, these measurements can be made through the dispersion analysis of the Rayleigh-type surface waves. Successful terrestrial application of this method has been reported by many investigators using spectral analysis of surface waves (SASW) and more recently using multichannel analysis of surface waves (MASW). The MASW method was originally developed as a land survey method to investigate the near-surface materials for their elastic properties: for example, the shear-wave velocity ( V S ), by recording and analyzing Rayleigh-type surface waves using a vertical (impulsive) seismic source and receivers. The acquired data are first analyzed for dispersion characteristics and, from these the shear-wave velocity is estimated using an inversion technique.

Leading Edge (Tulsa, OK)↗
USGS2006

Catastrophic sinkhole formation in Kansas: A case study

Sinkholes represent a hazard to property and human safety in a wide variety of geologic settings across the globe. In most cases, the subsidence rate of a sinkhole represents the most significant potential impact and risk to public safety. Since 1979, the Kansas Geological Survey has studied numerous sinkholes using high-resolution seismic reflection in an attempt to better understand the mechanisms that control their formation. Most sinkholes in central Kansas form as a result of dissolution of the Permian Hutchinson salt (Figure 1). The fluid source and associated pathway responsible for leaching these bedded evaporites have been natural, anthropogenic, and a combination of both. Sinkholes have been a part of the landscape in the North American midcontinent long before modern oil, gas, and mineral exploration, but clearly the activities of man have played a significant role in both increasing the number of sinkholes and affecting their subsidence rates.

Leading Edge (Tulsa, OK)↗
USGS2006

Continuous resistivity profiling to delineate submarine groundwater discharge - Examples and limitations

Aquifer-ocean interaction, saline intrusion, and submarine groundwater discharge (SGD) are emerging topics in hydrology and oceanography with important implications for water-resource management and estuarine ecology. Although the threat of saltwater intrusion has long been recognized in coastal areas, SGD has, until recently, received much less attention. It is clear that SGD constitutes a major nutrient flux to coastal waters, with implications for estuarine ecology, eutrophication, and loss of coral reefs; however, fundamental questions regarding SGD remain unanswered: What are the spatial and temporal distributions of SGD offshore? How do seasonal and storm-related variations in aquifer recharge affect SGD flux and nutrient loading? What controls do aquifer structure and heterogeneity impose? How are SGD and saline recirculation related? Geophysical methods can provide insights to help answer these questions and improve the understanding of this intriguing and environmentally relevant hydrologic phenomenon.

Leading Edge (Tulsa, OK)↗
USGS2007

Multichannel analysis of surface waves (MASW) - Active and passive methods

The conventional seismic approaches for near-surface investigation have usually been either high-resolution reflection or refraction surveys that deal with a depth range of a few tens to hundreds meters. Seismic signals from these surveys consist of wavelets with frequencies higher than 50 Hz. The multichannel analysis of surface waves (MASW) method deals with surface waves in the lower frequencies (e.g., 1-30 Hz) and uses a much shallower depth range of investigation (e.g., a few to a few tens of meters). ?? 2007 Society of Exploration Geophysicists.

Leading Edge (Tulsa, OK)↗
USGS2007

Improving resolution and understanding controls on GPR response in carbonate strata: Implications for attribute analysis

For more than a decade, environmental, engineering, groundwater, and shallow stratigraphic studies have demonstrated and advanced the usefulness of ground-penetrating radar (GPR) in lithified and unconsolidated sedimentary deposits (e.g., see Neal, 2004 and references therein). Despite the advances, important questions still remain on factors that control the actual appearance and characteristics of GPR reflections and diffractions in any given setting. ?? 2007 Society of Exploration Geophysicists.

Leading Edge (Tulsa, OK)↗
USGS2007

Monitoring engineered remediation with borehole radar

The success of engineered remediation is predicated on correct emplacement of either amendments (e.g., vegetable-oil emulsion, lactate, molasses, etc.) or permeable reactive barriers (e.g., vegetable oil, zero-valent iron, etc.) to enhance microbial or geochemical breakdown of contaminants and treat contaminants. Currently, site managers have limited tools to provide information about the distribution of injected materials; the existence of gaps or holes in barriers; and breakdown or transformation of injected materials over time.

The Leading Edge↗
USGS2008

SAGE celebrates 25 years of learning geophysics by doing geophysics

The increasing world demand and record-high costs for energy and mineral resources, along with the attendant environmental and climate concerns, have escalated the need for trained geophysicists to unprecedented levels. This is not only a national need; it's a critical global need. As Earth scientists and educators we must seriously ask if our geophysics pipeline can adequately address this crisis. One program that has helped to answer this question in the affirmative for 25 years is SAGE (Summer of Applied Geophysical Experience). SAGE continues to develop with new faculty, new collaborations, and additional ways to support student participation during and after SAGE. ?? 2008 Society of Exploration Geophysicists.

Leading Edge (Tulsa, OK)↗
USGS2008

Rayleigh-wave dispersive energy imaging and mode separating by high-resolution linear Radon transform

In recent years, multichannel analysis of surface waves (MASW) has been increasingly used for obtaining vertical shear-wave velocity profiles within near-surface materials. MASW uses a multichannel recording approach to capture the time-variant, full-seismic wavefield where dispersive surface waves can be used to estimate near-surface S-wave velocity. The technique consists of (1) acquisition of broadband, high-frequency ground roll using a multichannel recording system; (2) efficient and accurate algorithms that allow the extraction and analysis of 1D Rayleigh-wave dispersion curves; (3) stable and efficient inversion algorithms for estimating S-wave velocity profiles; and (4) construction of the 2D S-wave velocity field map.

Leading Edge (Tulsa, OK)↗
USGS2009

Anomalous dispersion due to hydrocarbons: The secret of reservoir geophysics?

When P- and S-waves travel through porous sandstone saturated with hydrocarbons, a bit of magic happens to make the velocities of these waves more frequency-dependent (dispersive) than when the formation is saturated with brine. This article explores the utility of the anomalous dispersion in finding more oil and gas, as well as giving a possible explanation about the effect of hydrocarbons upon the capillary forces in the formation. ?? 2009 Society of Exploration Geophysicists.

Leading Edge (Tulsa, OK)↗
USGS2009

Observation and modeling of source effects in coda wave interferometry at Pavlof volcano

Sorting out source and path effects for seismic waves at volcanoes is critical for the proper interpretation of underlying volcanic processes. Source or path effects imply that seismic waves interact strongly with the volcanic subsurface, either through partial resonance in a conduit (Garces et al., 2000; Sturton and Neuberg, 2006) or by random scattering in the heterogeneous volcanic edifice (Wegler and Luhr, 2001). As a result, both source and path effects can cause seismic waves to repeatedly sample parts of the volcano, leading to enhanced sensitivity to small changes in material properties at those locations. The challenge for volcano seismologists is to detect and reliably interpret these subtle changes for the purpose of monitoring eruptions.

Alaska↗
USGS2011

ATV magnetometer systems for efficient ground magnetic surveying

Ground magnetic data contain information, not pre-sent in aeromagnetic data, which may be useful for precisely mapping near-surface faults and contacts, as well as constraining or aiding interpretation of other geophysical methods. However, collecting ground magnetic data on foot is labor-intensive and is therefore limited to small surveys. In this article, we present two newly developed all-terrain vehicle (ATV) magnetometer systems that significantly expand the survey area that is possible in a ground magnetic survey without greatly reducing the quality of data.

The Leading Edge↗
USGS2011

Aeromagnetic anomalies over faulted strata

High-resolution aeromagnetic surveys are now an industry standard and they commonly detect anomalies that are attributed to faults within sedimentary basins. However, detailed studies identifying geologic sources of magnetic anomalies in sedimentary environments are rare in the literature. Opportunities to study these sources have come from well-exposed sedimentary basins of the Rio Grande rift in New Mexico and Colorado. High-resolution aeromagnetic data from these areas reveal numerous, curvilinear, low-amplitude (2–15 nT at 100-m terrain clearance) anomalies that consistently correspond to intrasedimentary normal faults (Figure 1). Detailed geophysical and rock-property studies provide evidence for the magnetic sources at several exposures of these faults in the central Rio Grande rift (summarized in Grauch and Hudson, 2007, and Hudson et al., 2008). A key result is that the aeromagnetic anomalies arise from the juxtaposition of magnetically differing strata at the faults as opposed to chemical processes acting at the fault zone. The studies also provide (1) guidelines for understanding and estimating the geophysical parameters controlling aeromagnetic anomalies at faulted strata (Grauch and Hudson), and (2) observations on key geologic factors that are favorable for developing similar sedimentary sources of aeromagnetic anomalies elsewhere (Hudson et al.). High-resolution aeromagnetic surveys are now an industry standard and they commonly detect anomalies that are attributed to faults within sedimentary basins. However, detailed studies identifying geologic sources of magnetic anomalies in sedimentary environments are rare in the literature. Opportunities to study these sources have come from well-exposed sedimentary basins of the Rio Grande rift in New Mexico and Colorado. High-resolution aeromagnetic data from these areas reveal numerous, curvilinear, low-amplitude (2–15 nT at 100-m terrain clearance) anomalies that consistently correspond to intrasedimentary normal faults (Figure 1). Detailed geophysical and rock-property studies provide evidence for the magnetic sources at several exposures of these faults in the central Rio Grande rift (summarized in Grauch and Hudson, 2007, and Hudson et al., 2008). A key result is that the aeromagnetic anomalies arise from the juxtaposition of magnetically differing strata at the faults as opposed to chemical processes acting at the fault zone. The studies also provide (1) guidelines for understanding and estimating the geophysical parameters controlling aeromagnetic anomalies at faulted strata (Grauch and Hudson), and (2) observations on key geologic factors that are favorable for developing similar sedimentary sources of aeromagnetic anomalies elsewhere (Hudson et al.).

The Leading Edge↗
USGS2012

Noise suppression in surface microseismic data

We introduce a passive noise suppression technique, based on the τ − p transform. In the τ − p domain, one can separate microseismic events from surface noise based on distinct characteristics that are not visible in the time-offset domain. By applying the inverse τ − p transform to the separated microseismic event, we suppress the surface noise in the data. Our technique significantly improves the signal-to-noise ratios of the microseismic events and is superior to existing techniques for passive noise suppression in the sense that it preserves the waveform. We introduce a passive noise suppression technique, based on the τ − p transform. In the τ − p domain, one can separate microseismic events from surface noise based on distinct characteristics that are not visible in the time-offset domain. By applying the inverse τ − p transform to the separated microseismic event, we suppress the surface noise in the data. Our technique significantly improves the signal-to-noise ratios of the microseismic events and is superior to existing techniques for passive noise suppression in the sense that it preserves the waveform.

The Leading Edge↗
USGS2013

Advancements in understanding the aeromagnetic expressions of basin-margin faults—An example from San Luis Basin, Colorado

Advancements in aeromagnetic acquisition technology over the past few decades have led to greater resolution of shallow geologic sources with low magnetization, such as intrasedimentary faults and paleochannels. Detection and mapping of intrasedimentary faults in particular can be important for understanding the overall structural setting of an area, even if exploration targets are much deeper. Aeromagnetic methods are especially useful for mapping structures in mountain-piedmont areas at the margins of structural basins, where mineral exploration and seismic-hazard studies may be focused, and where logistical or data-quality issues encumber seismic methods. Understanding if the sources of aeromagnetic anomalies in this context originate from sedimentary units or bedrock is important for evaluating basin structure and/or depth to shallow exploration targets. Advancements in aeromagnetic acquisition technology over the past few decades have led to greater resolution of shallow geologic sources with low magnetization, such as intrasedimentary faults and paleochannels. Detection and mapping of intrasedimentary faults in particular can be important for understanding the overall structural setting of an area, even if exploration targets are much deeper. Aeromagnetic methods are especially useful for mapping structures in mountain-piedmont areas at the margins of structural basins, where mineral exploration and seismic-hazard studies may be focused, and where logistical or data-quality issues encumber seismic methods. Understanding if the sources of aeromagnetic anomalies in this context originate from sedimentary units or bedrock is important for evaluating basin structure and/or depth to shallow exploration targets. Although explorationists have surmised that subtle, narrow, linear aeromagnetic anomalies or gradients are caused by intrasedimentary faults, the nature of the magnetic sources has been debated. A common and intuitive explanation for the linear anomalies considers that the magnetic properties of the fault zone have been altered by secondary chemical processes, either through the growth or destruction of magnetic minerals. However, comprehensive, multidisciplinary studies of partially exposed intrasedimentary faults in basins within the central Rio Grande Rift, New Mexico, have shown that the anomalies can be completely explained by the tectonic juxtaposition of strata of differing magnetic properties at the fault (summarized in Grauch and Hudson, 2007 , 2011 ). Whereas a reduction in magnetic susceptibility was detected at some fault zones in the laboratory, the slight reduction and small volume of material affected were insufficient to produce aeromagnetic anomalies ( Hudson et al., 2008 ). A key finding of the studies summarized by Grauch and Hudson (2007 , 2011 ) is that multiple magnetic contrasts (sources) can be vertically stacked at one fault. This situation requires rethinking of common assumptions when modeling faults as simple steps or when interpreting depth-estimation results. The multiple contrasts in these case studies arise from the tectonic juxtaposition of stratified sediments with differing magnetic properties. Multiple, vertically stacked magnetic sources also can occur where volcanic layers are interbedded with the sedimentary section or where faults offset both shallow bedrock and its overlying sedimentary cover. The latter situation is common at basin margins. Herein, we summarize and expand on an investigation of the sources of aeromagnetic anomalies related to faults along the eastern margin of the San Luis Basin, northern Rio Grande Rift, Colorado ( Grauch et al., 2010 ). Similar to the faults examined in the central Rio Grande Rift, magnetic sources can be completely explained by tectonic juxtaposition and produce multiple, vertically stacked magnetic contrasts at individual faults. However, the geologic sources are different. They arise from both the sedimentary cover and the underlying bedrock rather than from stratified sediments. In addition, geologic evidence for secondary growth or destruction of magnetic minerals at the fault zone is lacking.

Colorado↗
USGS2013

Expression of terrain and surface geology in high-resolution helicopter-borne gravity gradient (AGG) data: examples from Great Sand Dunes National Park, Rio Grande Rift, Colorado

Airborne gravity gradient (AGG) data are rapidly becoming standard components of geophysical mapping programs, due to their advantages in cost, access, and resolution advantages over measurements of the gravity field on the ground. Unlike conventional techniques that measure the gravity field, AGG methods measure derivatives of the gravity field. This means that effects of terrain and near-surface geology are amplified in AGG data, and that proper terrain corrections are critically important for AGG data processing. However, terrain corrections require reasonable estimates of density for the rocks and sediments that make up the terrain. A recommended philosophical approach is to use the terrain and surface geology, with their strong expression in AGG data, to the interpreter’s advantage. An example of such an approach is presented here for an area with very difficult ground access and little ground gravity data. Nettleton-style profiling is used with AGG data to estimate the densities of the sand dunefield and adjacent Precambrian rocks from the area of Great Sand Dunes National Park in southern Colorado. Processing of the AGG data using the density estimate for the dunefield allows buried structures, including a hypothesized buried basement bench, to be mapped beneath the sand dunes.

Colorado↗