USGS Science⌕ Search

SEARCH · USGS Science

Results for “Mountain Views”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10Linked to original sources
USGS2010

Distribution and interplay of geologic processes on Titan from Cassini radar data

The Cassini Titan Radar Mapper is providing an unprecedented view of Titan’s surface geology. Here we use Synthetic Aperture Radar (SAR) image swaths (Ta–T30) obtained from October 2004 to December 2007 to infer the geologic processes that have shaped Titan’s surface. These SAR swaths cover about 20% of the surface, at a spatial resolution ranging from ∼350 m to ∼2 km. The SAR data are distributed over a wide latitudinal and longitudinal range, enabling some conclusions to be drawn about the global distribution of processes. They reveal a geologically complex surface that has been modified by all the major geologic processes seen on Earth – volcanism, tectonism, impact cratering, and erosion and deposition by fluvial and aeolian activity. In this paper, we map geomorphological units from SAR data and analyze their areal distribution and relative ages of modification in order to infer the geologic evolution of Titan’s surface. We find that dunes and hummocky and mountainous terrains are more widespread than lakes, putative cryovolcanic features, mottled plains, and craters and crateriform structures that may be due to impact. Undifferentiated plains are the largest areal unit; their origin is uncertain. In terms of latitudinal distribution, dunes and hummocky and mountainous terrains are located mostly at low latitudes (less than 30°), with no dunes being present above 60°. Channels formed by fluvial activity are present at all latitudes, but lakes are at high latitudes only. Crateriform structures that may have been formed by impact appear to be uniformly distributed with latitude, but the well-preserved impact craters are all located at low latitudes, possibly indicating that more resurfacing has occurred at higher latitudes. Cryovolcanic features are not ubiquitous, and are mostly located between 30° and 60° north. We examine temporal relationships between units wherever possible, and conclude that aeolian and fluvial/pluvial/lacustrine processes are the most recent, while tectonic processes that led to the formation of mountains and Xanadu are likely the most ancient.

Icarus↗
USGS2019

Patterns of primary production and ecological drought in Yellowstone

Introduction: Photosynthesis converts sunlight into stored energy in millions of leaves, flowers and seeds that maintain the web of life in Yellowstone. This transformation of energy fixes carbon, supplies organic matter to soils, and can become fuel for wildfire. As the first link of the food chain, new plant biomass is called primary production and provides energy to consumers, including wildlife. While Yellowstone is a mountain environment with deep winter snowpack, the park can get very dry in some years as evidenced by massive wildfires in 1988 and 2016. Droughts like these not only contribute to fire potential, but they affect primary production, the food chain and likely will play an increasingly important role in transforming vegetation structure and composition in the future. Meteorological, agricultural, and hydrological drought have been assessed quantitatively for many years, but key indicators of drought in wildland ecosystems have not been formally defined until recently (Crausbay et al., 2017). One promising new method to do this is by measuring how vegetation responds to negative effects of drought, and positive effects of favorable conditions that offset negative effects of drought. The balance of drought stress and growth has important implications for future vegetation condition as the climate of Yellowstone changes. Monitoring primary production, and predicting future vegetation changes are needed to provide a comprehensive view of park health and anticipate future ecosystem changes (Crabtree et al. 2009, Nemani et al. 2009). Although an important indicator of ecosystem condition, primary production can be time and resource-intensive to monitor in wildland settings using traditional ground-based methods such as clipping and weighing. Fortunately, ground-based methods can be complemented and enhanced by monitoring primary production with satellite imagery. Measurements of solar radiation reflectance in visible and near infra-red wavelengths can indicate primary production at frequent weekly intervals from the Moderate Resolution Imaging Spectrometer (MODIS) on satellites operated by NASA. The Greater Yellowstone Inventory and Monitoring Network (GRYN) uses this information to track changes in primary production across Yellowstone over time. They link these measurements to vegetation types, soils, and climate to understand where and when changes in production have occurred and may occur in the future.

Yellowstone National Park↗
USGS1951

Cement raw materials available to the Windy Creek area, Alaska

The high cost of imported cement and the strategic advantages of a local source of supply for the military establishment have led to a growing interest in the possibility of cement manufacture in interior Alaska. A plant location in the Alaska Railroad belt seems desirable in view of the advantages of rail transportation and the accessibility of the principal interior markets. A cement manufacturing operation would require essentially four types of raw materials: 1) calcareous material, 2) argillaceous material, 3) fuel and 4) gypsum. The relatively favorable location of limestones near Windy station on the Alaska Railroad has led to the investigation of the potential raw materials which would be available to that region. Three limestone deposits of commercial size occur in the Devonian rocks of the Alaska Range in the Windy Creek area. Two appear to be of suitable chemical character. They are located approximately 7 and 11 miles west of the Railroad respectively. Twenty-four deposits of various types of argillaceous materials in the Healy River and Windy Creek areas have been sampled and analyzed chemically. Sufficient and presumably suitable fuel for a potential cement operation appears to be available from the coal mines in the Healy River area. Gypsum occurs at Sheep Mountain, 120 miles southeast of the Windy Creek area. Potentially sufficient tonnages are available to meet the requirements of a cement plant, but little has been done to develop the deposits. The raw materials now available probably would be suitable for type I cement, although the alkali limit probably would be exceeded if no means of beneficiation were employed.

Alaska↗
USGS2022

South Carolina and Landsat

South Carolina, the eighth State admitted to the union, transcends its size with its deep, rich history; striking beauty; vast natural resources; and extensive cultural diversity. Home to part of the Blue Ridge Mountains of the Central Appalachians, the Upstate is graced with more than 100 waterfalls, while the Lowcountry borders the Atlantic Ocean with 187 miles of coastline and 35 barrier islands. Forests cover two-thirds of the State, and forestry and agriculture together, as agribusiness, make up South Carolina’s leading industry. Two historic crops—cotton and tobacco—still rank in the top 10 commodities, though corn and soybeans now rank higher. Poultry, cattle, peanuts, and flowers also make the list. South Carolina’s population totals more than five million. Other residents include a variety of wildlife, bird, reptile, and fish species, including Ursus americanus (black bears), Alligator mississippiensis (American alligators), and Tursiops truncatus (bottlenose dolphins). More than 100 tree species also reside in South Carolina, which pays homage to one with its “The Palmetto State” nickname. South Carolina’s subtropical climate, long coastline, and lower elevations make it highly susceptible to tornado and hurricane activity and coastal flooding. Projected sea-level rise is a growing concern. A view from space can help monitor and manage natural resources on the land and in rivers, marshes, and the coast. Landsat reveals not just what an area looks like now, but also insights from decades ago.

South Carolina↗
USGS2021

Three-dimensional geologic map of the Brady geothermal area, Nevada

The three-dimensional (3D) geologic map characterizes the subsurface in the Brady geothermal area in the northern Hot Springs Mountains of northwestern Nevada. We built the 3D map by integrating the results from detailed geologic mapping, seismic-reflection, potential-field-geophysical, and lithologic well-logging investigations completed in the study area. This effort was undertaken to investigate the geologic structure in the geothermal field and geologic controls on hydrothermal circulation. This characterization of the controls on hydrothermal circulation is applicable to the assessment, exploration, and development of analogous geothermal resources. The 3D map area is 4 kilometers (km) wide along the west-northwest-to-east-southeast axis and 6 km wide along the north-northeast-to-south-southwest axis and extends to 1.0 km below sea level, approximately 2.5 km below the land surface. We describe the geologic units and structures in the map area, discuss the methods used to integrate the geologic and geophysical information into the 3D geologic interpretation, and calculate several geologic factors that may aid in our understanding of hydrothermal circulation. Map sheet 1 provides horizontal and vertical section views and oblique perspective views from several angles of the 3D geologic map. Map sheet 2 provides views of derivative calculations based on the 3D geologic data, 3D density of faults, 3D density of fault intersections and terminations, slip tendency on 3D faults, and dilation tendency on 3D faults. We provide digital data for all elements of the map, such as individual 3D fault and stratigraphic surfaces, 3D fault density, 3D fault intersection density, 3D slip tendency on fault surfaces, and 3D dilation tendency on fault surfaces. A brief movie displaying the 3D map is available at https://doi.org/10.3133/sim3469 .

Nevada↗
USGS2010

Whole-rock Pb and Sm-Nd isotopic constraints on the growth of southeastern Laurentia during Grenvillian orogenesis

The conventional view that the basement of the southern and central Appalachians represents juvenile Mesoproterozoic crust, the final stage of growth of Laurentia prior to Grenville collision, has recently been challenged. New whole-rock Pb and Sm‑Nd isotopic data are presented from Mesoproterozoic basement in the southern and central Appalachians and the Granite-Rhyolite province, as well as one new U-Pb zircon age from the Granite-Rhyolite province. These data, combined with existing data from Mesoproterozoic terranes throughout southeastern Laurentia, further substantiate recent suggestions that the southern and central Appalachian basement is exotic with respect to Laurentia. Sm-Nd isotopic compositions of most rocks from the southern and central Appalachian basement are consistent with progressive growth through reworking of the adjacent Granite-Rhyolite province. However, Pb isotopic data, including new analyses from important regions not sampled in previous studies, do not correspond with Pb isotopic compositions of any adjacent crust. The most distinct ages and isotopic compositions in the southern and central Appalachian basement come from the Roan Mountain area, eastern Tennessee–western North Carolina. The data set indicates U-Pb zircon ages up to 1.8 Ga for igneous rocks, inherited and detrital zircon ages >2.0 Ga, Sm-Nd depleted mantle model (T DM ) ages >2.0 Ga, and the most elevated 207 Pb/ 204 Pb observed in southeastern Laurentia. The combined U-Pb geochronologic and Sm-Nd and Pb isotopic data preclude derivation of southern and central Appalachian basement from any nearby crustal material and demonstrate that Grenville age crust in southeastern Laurentia is exotic and probably was transferred during collision and assembly of Rodinia. These new data better define the boundary between the exotic southern and central Appalachian basement and adjacent Laurentian Granite-Rhyolite province.

Geological Society of America Bulletin↗
USGS1908

Water resources of Beaver Valley, Utah

Location and extent of area examined. Beaver Valley is located in Beaver County, in southwestern Utah, about 175 miles south of Salt Lake. It lies between the Tushar Mountains on the east and the Beaver Mountains on the west. The principal town of the valley is Beaver, which is most conveniently reached from Milford, a station on the San Pedro, Los Angeles and Salt Lake Railroad. The valley, together with its neighboring highlands, occupies the eastern third of Beaver County, an area of about 1,200 square miles. A large part of this area, however, is rocky upland and unproductive desert, the tillable land comprising a comparatively small area in the immediate vicinity of the streams. Purpose and scope of work . The purpose of this paper is to present information concerning the waters of Beaver Valley and to point out ways and means of increasing their usefulness. The presence of a large amount of water in Beaver Valley results from local topograhic conditions, the water being supplied by precipitation in the highland to the east. Its conservation and distribution result from geologic conditions, the water being held in loose gravel and sand, which are more or less confined between ridges of consolidated rocks. The rock basins were formed partly by erosion and partly by faulting and surface deformation. In order to accomplish the purpose in view it is therefore necessary to describe the geographic and geologic conditions in Beaver Valley and neighboring regions. The investigation included the determination of the flow of streams and springs, of the manner of occurrence and quantity of the underground waters as shown by the geologic and geographic conditions of the region and by the distribution of springs and wells, and of the chemical character of the waters with reference to their adaptability to domestic use and to irrigation. The chemical data were obtained (a) by field assays, which are approximately correct and probably of sufficient accuracy to be of value in comparing the various waters; (b) by more exact analyses, some of which were made in the laboratory of the United States Geological Survey by W. M. Barr, and others by Herman Harms, State chemist of Utah, for the San Pedro, Los Angeles and Salt Lake Railroad; and (c) by sanitary analyses, made also by Herman Harms. Cooperation . The work was done during the summer of 1906, the United States Geological Survey cooperating with the State of Utah through Caleb Tanner, State engineer, and with the county of Beaver through the supervisors of the county. In collecting the information the writer was assisted by J. F. Hoyt, of Nephi, Utah.

Utah↗
USGS1973

Boulder Batholith, Montana: A product of two contemporaneous but chemically distinct magma series

Rocks of the Late Cretaceous composite Boulder batholith, though successively emplaced in a relatively small segment of the Earth's crust within a very brief time span (78 to 68 m.y.), can be grouped chemically into two magma series: (1) the main series , defined principally by plutons in the central and northern parts of the batholith; and (2) the sodic series , defined mostly by plutons in the southern part. For any given SiO 2 content, the rocks of the main series tend to be higher in K 2 O and lower in Na 2 O than rocks of the sodic series. The chemical distinction between the two series proposed is also expressed by variation patterns for U, Th, Rb, and Sr abundances, by lead isotope compositions, but not by strontium isotope compositions. The prebatholith Elkhorn Mountains Volcanics (Late Cretaceous), especially the mafic members, are chemically and isotopically similar to the rocks of the main series, confirming geologic evidence of the genetic association between them. The postbatholith Lowland Creek Volcanics (early Eocene), though chemically more closely related to the sodic series, isotopically are more akin to, but slightly more radiogenic than, the main series. Post–Lowland Creek volcanic rocks (Miocene or Pliocene) are compositionally similar to the sodic series rocks. Spatial distribution of the batholith and the volcanic rocks exhibits a very crude chemical zonation of the region: for a given silica content, relatively more potassic rocks (main series and prebatholith volcanic rocks) tend to occur mainly in the north and east, whereas relatively more sodic rocks (sodic series and postbatholith volcanic rocks) predominate in the south and west. Available field, chemical, and isotopic evidence collectively suggests that the observed compositional variations for the Boulder batholith are most reasonably interpreted in terms of a model involving two magma series derived from two or more magma sources within the lower crust or upper mantle. These source regions are interred to vary chemically and isotopically, either laterally or vertically; in view of the rather small areal extent of the Boulder batholith, however, a vertically zoned source region is more probable.

Montana↗
USGS2023

Evaluation of Copernicus DEM and comparison to the DEM used for Landsat collection-2 processing

Having highly accurate and reliable Digital Elevation Models (DEMs) of the Earth’s surface is critical to orthorectify Landsat imagery. Without such accuracy, pixel locations reported in the data are difficult to assure as accurate, especially in more mountainous landscapes, where the orthorectification process is the most challenging. To this end, the Landsat Calibration and Validation Team (Cal/Val) compared the Copernicus DEM (CopDEM) to the DEM that is currently used in Collection-2 processing (called “Collection-2 DEM”). NGS ground-surveyed and lidar-based ICESat-2 points were used, and the CopDEM shows improvement to be less than 1 m globally, except in Asia where the accuracy and resolution of the DEM were greater for the CopDEM compared to the Collection-2 DEM. Along with slightly improved accuracy, the CopDEM showed more consistent results globally due to its virtually seamless source and consistent creation methods throughout the dataset. While CopDEM is virtually seamless, having greater than 99% of their data coming from a single source (Tandem-X), there are significantly more voids in the higher elevations which were mostly filled with SRTM derivatives. The accuracy of the CopDEM fill imagery was also compared to the Collection-2 DEM and the results were very similar, showing that the choice of fill imagery used by CopDEM was appropriate. A qualitative assessment using terrain-corrected products processed with different DEMs and viewing them as anaglyphs to evaluate the DEMs proved useful for assessing orbital path co-registration. While the superiority of the CopDEM was not shown to be definitive by the qualitative method for many of the regions assessed, the CopDEM showed a clear advantage in Northern Russia, where the Collection-2 DEM uses some of the oldest and least accurate datasets in the compilation of the Collection-2 DEM. This paper presents results from the comparison study, along with the justification for proceeding with using the Copernicus DEM in future Landsat processing. As of this writing, the Copernicus DEM is planned to be used in Collection-3 processing, which is anticipated to be released no earlier than 2025.

Remote Sensing↗
USGS1986

Applications of UThPb isotope systematics to the problems of radioactive waste disposal

Concentrations of U, Th and Pb, and the isotopic composition of Pb for whole-rock samples of granitoids show: (1) that open-system behavior is nearly universal in the surface and near-surface environment; and (2) that elemental mobility is possible to depths of several hundred meters. Several identified or at least postulated factors that control U and/or Pb mobility include: (1) the mineralogical sites for U and its daughter products; (2) access of groundwater to these sites; (3) the volume of circulating water; and (4) the chemistry of the groundwater. Studies of granitic samples from peralkaline complexes in the Arabian Shield have shown that most samples lost less than 20% of their U during recent exposure to the near-surface environment. Most of the U in these samples appears to be firmly bound in zircons. In contrast, most surface and shallow drill-core samples of the granite of Lankin Dome (Granite Mountains, Wyoming) have lost ??? 70% of their U. Most of the U in these samples is weakly bound in biotite and epidote-family minerals. The granite recovered during the Illinois Deep Drill Hole Project (Stephenson County, Illinois) is mineralogically similar to the granite of Lankin Dome, but this granite lost radiogenic Pb rather than U, probably as a result of exposure to groundwater that had a markedly different chemistry from that in the Granite Mountains. Studies of the Sherman Granite (Wyoming) and the Go??temar Granite (southeastern Sweden) have shown that U and/or Pb mobility is greatest in and near fractured rock. The greater mobility is interpreted to be the result of both a larger water/rock ratio in the fractured rock and exposure to water over an increased surface area (and consequently a greater number of uranium sites). Several types of geochemical and mineralogic data can be used to identify rock-water interaction in granites; however, if rock samples have favorable radiogenic to common Pb ratios, both the amount and approximate timing of U or Pb mobility can be obtained through the use of isotopic studies. Such information can be extremely important in the search for favorable hosts for containment of radioactive waste. Rocks such as the Go??temar Granite have undergone considerable rock-water interaction, most of which occurred ??? 400 Myr. ago and little in recent times. Thus a search for zones that have experienced only a little interaction with water may provide a misleading prediction as to the ability of such zones to shield radioactive wastes from the modern biosphere. From an isotopic point of view, an ideal candidate for evaluation as a host rock for radioactive wastes would have the following characteristics: (1) a high ratio (> 2) of radiogenic to common Pb in order to optimize precision of the results; (2) a simple two-stage geologic history so that results could be interpreted without multiple working hypotheses; and (3) an originally high percentage (> 50%) of labile U so that the results would be highly sensitive to even small amount of rock-water interaction. These characteristics should produce rocks with marked radioactive disequilibrium in surface samples. The disequilibrium should grade to radioactive equilibrium with increasing depth until zones in which water has not circulated are found. Extensive regions of such zones must exist because UThPb systematics of most analyzed granitoids demonstrate closed-system behavior for almost all of their history except for their recent history in the near-surface environment. ?? 1986.

Chemical Geology↗
USGS2010

Balancing forest-regeneration probabilities and maintenance costs in dry grasslands of high conservation priority

Abandonment of agricultural land has resulted in forest regeneration in species-rich dry grasslands across European mountain regions and threatens conservation efforts in this vegetation type. To support national conservation strategies, we used a site-selection algorithm (MARXAN) to find optimum sets of floristic regions (reporting units) that contain grasslands of high conservation priority. We sought optimum sets that would accommodate 136 important dry-grassland species and that would minimize forest regeneration and costs of management needed to forestall predicted forest regeneration. We did not consider other conservation elements of dry grasslands, such as animal species richness, cultural heritage, and changes due to climate change. Optimal sets that included 95–100% of the dry grassland species encompassed an average of 56–59 floristic regions (standard deviation, SD 5). This is about 15% of approximately 400 floristic regions that contain dry-grassland sites and translates to 4800–5300 ha of dry grassland out of a total of approximately 23,000 ha for the entire study area. Projected costs to manage the grasslands in these optimum sets ranged from CHF (Swiss francs) 5.2 to 6.0 million/year. This is only 15–20% of the current total estimated cost of approximately CHF30–45 million/year required if all dry grasslands were to be protected. The grasslands of the optimal sets may be viewed as core sites in a national conservation strategy.

Conservation Biology↗
USGS2006

Preliminary surficial geologic map of a Calico Mountains piedmont and part of Coyote Lake, Mojave desert, San Bernardino County, California

This 1:24,000 scale detailed surficial geologic map and digital database of a Calico Mountains piedmont and part of Coyote Lake in south-central California depicts surficial deposits and generalized bedrock units. The mapping is part of a USGS project to investigate the spatial distribution of deposits linked to changes in climate, to provide framework geology for land use management (http://deserts.wr.usgs.gov), to understand the Quaternary tectonic history of the Mojave Desert, and to provide additional information on the history of Lake Manix, of which Coyote Lake is a sub-basin. Mapping is displayed on parts of four USGS 7.5 minute series topographic maps. The map area lies in the central Mojave Desert of California, northeast of Barstow, Calif. and south of Fort Irwin, Calif. and covers 258 sq.km. (99.5 sq.mi.). Geologic deposits in the area consist of Paleozoic metamorphic rocks, Mesozoic plutonic rocks, Miocene volcanic rocks, Pliocene-Pleistocene basin fill, and Quaternary surficial deposits. McCulloh (1960, 1965) conducted bedrock mapping and a generalized version of his maps are compiled into this map. McCulloh's maps contain many bedrock structures within the Calico Mountains that are not shown on the present map. This study resulted in several new findings, including the discovery of previously unrecognized faults, one of which is the Tin Can Alley fault. The north-striking Tin Can Alley fault is part of the Paradise fault zone (Miller and others, 2005), a potentially important feature for studying neo-tectonic strain in the Mojave Desert. Additionally, many Anodonta shells were collected in Coyote Lake lacustrine sediments for radiocarbon dating. Preliminary results support some of Meek's (1999) conclusions on the timing of Mojave River inflow into the Coyote Basin. The database includes information on geologic deposits, samples, and geochronology. The database is distributed in three parts: spatial map-based data, documentation, and printable map graphics of the database. Spatial data are distributed as an ArcInfo personal geodatabase, or as tabular data in the form of Microsoft Access Database (MDB) or dBase Format (DBF) file formats. Documentation includes this file, which provides a discussion of the surficial geology and describes the format and content of the map data, and Federal Geographic Data Committee (FGDC) metadata for the spatial map information. Map graphics files are distributed as Postscript and Adobe Acrobat Portable Document Format (PDF) files, and are appropriate for representing a view of the spatial database at the mapped scale.

Open-File Report↗
USGS2024

Unravelling spatial heterogeneity of inundation pattern domains for 2D analysis of fluvial landscapes and drainage networks

Fluvial landscape analysis is an essential part of geomorphology, hydrology, ecology, and cartography. It is traditionally focused on the transition between hillslopes and channel domain, in which the network drainage is represented by static flow lines. However, the natural fluctuations of the processes occurring in the watershed induce lateral and longitudinal expansions and contractions in the drainage patterns and variations of stream surface area. These dynamics can be better understood by introducing a two-dimensional (2D) view of catchment hydrography, in which river width and floodplain are included in the analysis. The novelty introduced in this work is the development of a hydrodynamic hierarchical framework (HHF) to analyse the transitions among geomorphic and hydrographic features of the fluvial landscape, distinguishing hillslope, unchanneled valleys, floodplains, and single/multithreads channels. HHF is based on the estimation of nested inundation pattern domains (IPDs) from digital elevation models and 2D hydrodynamic modeling. IPDs are defined by scaling laws that characterize log–log relations between watershed drainage density and unit discharge thresholds extracted from a 2D direct rainfall method (DRM) under steady state solutions. The physical significance of the IPDs is analysed within the context of both the physiographic features of the fluvial landscape and the rainfall rates employed as input for the modeling approach. Initially, the spatial heterogeneity of the IPDs is used to derive stream width metrics as a function of the rainfall rate. Then, a spatial index, representative of the IPDs' heterogeneity, is introduced as a measure of the susceptibility of the drainage network surface area to expansion and contraction. Finally, the consistency of the results is assessed in comparison to another hydrodynamic-based method for fluvial landscape analysis recently proposed in the literature. The proposed approach is analysed using challenging mountain and low-relief environments, characterized by multithread channels, meander cut-offs, oxbow lakes, and extreme landscapes that feature glacial outwash, permafrost, and peatlands.

Alaska↗
USGS2025

Preliminary field report of landslide hazards following Hurricane Helene

Executive Summary This report reflects our knowledge regarding the widespread landslide activity associated with Hurricane Helene observed during the U.S. Geological Survey’s (USGS) mission assignment to North Carolina in October 2024. The material in this report was originally prepared for the Federal Emergency Management Agency under mission assignment DR-4827-NC. The data and commentary in this report are reflective of a report provided to the Federal Emergency Management Agency (FEMA) on October 18, 2024, as well as information provided in briefings at the Buncombe County Emergency Operations Center. The report has been modified for public dissemination. This assessment was based on systematic visual examination and mapping of landslide locations from aerial and satellite imagery, visual and photographic observations from low-level helicopter overflights and conversations with local landslide experts from the North Carolina Geological Survey and Appalachian Landslide Consultants PLLC, and more than 50 years of combined landslide hazard professional experience of the mission-assigned field team. No systematic field investigations were done by the USGS. While responding to the event, the USGS did not identify any landslides that posed an immediate major threat to recovery personnel in parts of nine counties in North Carolina (Avery, Buncombe, Henderson, McDowell, Mitchell, Polk, Rutherford, Watauga, and Yancey); however, threats from renewed landslide activity may remain heightened in localized areas for months or even years. Known areas of the most abundant landslide occurrence include Bat Cave, Lake Lure, Chimney Rock, Swannanoa, Black Mountain, Fairview, steep areas in Asheville, and the Blue Ridge Parkway. The USGS shared detailed locations of known landslides with the Emergency Operations Centers. The thousands of landslide scars on hillsides and landslide deposits on flatter ground may present some threat to recovery activities. Soil and rocks will continue to erode from newly exposed landslide scars and may pose a threat to people and infrastructure who are immediately nearby. In general, the steeper and taller the landslide scar, the greater the potential threat. This threat is heightened during periods of rainfall and increases with the duration and intensity of rainstorms. Very heavy rainfall, or repeated rainfall events during short periods, could also initiate new landslides on steep slopes. Excavation of landslide deposits, particularly excavation of those deposits directly adjacent to steep slopes, may also pose a threat to nearby people and equipment. An interagency collaborative mapping effort led by the USGS that informed this assessment identified 1,155 landslide locations by the October 2024 briefings, but that number increased to 2,217 in a final reviewed version of the locations published in January 2025. Locations were mapped from satellite imagery, fixed-wing and helicopter surveys, media and social media, and field reports in the 3 weeks following the passage of the remnants of Hurricane Helene. USGS products outlined in this report are publicly available and include geotagged photographs from aerial reconnaissance, hazard models, an interactive view of mapped landslide locations, and landslide safety and education resources.

North Carolina, South Carolina, Tennessee, Virgini↗
USGS2010

Database for the geologic map of the Bend 30- x 60-minute quadrangle, central Oregon

The Bend 30- x 60-minute quadrangle has been the locus of volcanism, faulting, and sedimentation for the past 35 million years. It encompasses parts of the Cascade Range and Blue Mountain geomorphic provinces, stretching from snowclad Quaternary stratovolcanoes on the west to bare rocky hills and sparsely forested juniper plains on the east. The Deschutes River and its large tributaries, the Metolius and Crooked Rivers, drain the area. Topographic relief ranges from 3,157 m (10,358 ft) at the top of South Sister to 590 m (1,940 ft) at the floor of the Deschutes and Crooked Rivers where they exit the area at the north-central edge of the map area. The map encompasses a part of rapidly growing Deschutes County. The city of Bend, which has over 70,000 people living in its urban growth boundary, lies at the south-central edge of the map. Redmond, Sisters, and a few smaller villages lie scattered along the major transportation routes of U.S. Highways 97 and 20. This geologic map depicts the geologic setting as a basis for structural and stratigraphic analysis of the Deschutes basin, a major hydrologic discharge area on the east flank of the Cascade Range. The map also provides a framework for studying potentially active faults of the Sisters fault zone, which trends northwest across the map area from Bend to beyond Sisters. This digital release contains all of the information used to produce the geologic map published as U.S. Geological Survey Geologic Investigations Series I-2683 (Sherrod and others, 2004). The main component of this digital release is a geologic map database prepared using ArcInfo GIS. This release also contains files to view or print the geologic map and accompanying descriptive pamphlet from I-2683.

Oregon↗
USGS2016

Ca, Sr and Ba stable isotopes reveal the fate of soil nutrients along a tropical climosequence

Nutrient biolifting is an important pedogenic process in which plant roots obtain inorganic nutrients such as phosphorus (P) and calcium (Ca) from minerals at depth and concentrate those nutrients at the surface. Here we use soil chemistry and stable isotopes of the alkaline earth elements Ca, strontium (Sr) and barium (Ba) to test the hypothesis that biolifting of P has been an important pedogenic process across a soil climosequence developed on volcanic deposits at Kohala Mountain, Hawaii. The geochemical linkage between these elements is revealed as generally positive site-specific relationships in soil mass gains and losses, particularly for P, Ba and Ca, using the ratio of immobile elements titanium and niobium (Ti/Nb) to link individual soil samples to a restricted compositional range of the chemically and isotopically diverse volcanic parent materials. At sites where P is enriched in surface soils relative to abundances in deeper soils, the isotope compositions of exchangeable Ca, Sr and Ba in the shallowest soil horizons (< 10 cm depth) are lighter than those of the volcanic parent materials and trend toward those of plants growing on fresh volcanic deposits. In contrast the isotope composition of exchangeable Ba in deeper soil horizons (> 10 cm depth) at those sites is consistently heavier than the volcanic parent materials. The isotope compositions of exchangeable Ca and Sr trend toward heavier compositions with depth more gradually, reflecting increasing leakiness from these soils in the order Ba < Sr < Ca and downward transfer of light biocycled Ca and Sr to deeper exchange sites. Given the long-term stability of ecosystem properties at the sites where P is enriched in surface soils, a simple box model demonstrates that persistence of isotopically light exchangeable Ca, Sr and Ba in the shallowest soil horizons requires that the uptake flux to plants from those near-surface layers is less than the recycling flux returned to the surface as litterfall. This observation implicates an uptake flux from an additional source which we attribute to biolifting. We view the heavy exchangeable Ba relative to soil parent values in deeper soils at sites where P is enriched in surface soils, and indeed at all but the wettest site across the climosequence, to represent the complement of an isotopically light Ba fraction removed from these soils by plant roots consistent with the biolifting hypothesis. We further suggest that decreasing heaviness of depth-integrated exchangeable Ba in deeper soils with increasing median annual precipitation across the climosequence reflects greater reliance on shallow nutrient sources as site water balance increases. While the Ca, Sr and Ba isotopes considered together were useful in confirming an important role for nutrient biolifting across the climosequence, the Ba isotopes provided the most robust tracer of biolifting and have the greatest potential to find application as an isotopic proxy for P dynamics in soils.

Hawaii↗
USGS2022

The 180-km-long Meers-Willow Fault System in the Southern Oklahoma Aulacogen: A potential U.S. mid-continent seismic hazard

We integrate new high-resolution aeromagnetic data with seismic reflection data, well logs, satellite remote sensing, and field observations to provide a regional view of buried and exposed structures in the Southern Oklahoma Aulacogen and to assess their potential for future seismicity. Trends ranging from NW−SE to ∼E−W, peaking at 330° ± 4.5° and 280° ± 3°, dominate the magnetic lineaments of the Southern Oklahoma Aulacogen, reflecting basement contacts, dikes, and faults, including a previously unmapped ∼100-km-long basement fault, which is herein referred to as the Willow fault. The fault disrupts, truncates, and vertically offsets basement-related seismic reflectors and overlying Paleozoic strata up through the Permian reflectors. Surface deformation along the trend includes fault-parallel monoclinal folds, pervasive fractures, and fracture-hosted mud dikes in Permian evaporite units. These structures indicate a Permian or post-Permian reactivation of the fault. Along-strike, the Willow fault connects to the NW-trending, seismically active Meers Fault to comprise the ∼180-km-long Meers-Willow fault system, which potentially represents a major seismic hazard along the Southern Oklahoma Aulacogen. Fault slip potential analyses of the mapped potential fault traces show that seismic hazards are elevated where faults have steeper dips. Given some uncertainty in the regional stress state, we also show that hazards along the NW−SE to E−W trending faults vary considerably within the uncertainty range. We propose that the Meers-Willow fault system originated as a Cambrian aulacogen-scale, basement-rooted fault that was later reactivated as a left-lateral strike-slip fault (with ∼40 km displacement) during the late Paleozoic Ancestral Rocky Mountain orogeny, highlighting that lateral offset accommodated a major component of deformation during the orogen.

Oklahoma↗
USGS2021

National Park Service Vegetation Mapping Inventory Program: Great Smoky Mountains National Park vegetation mapping project

The National Park Service (NPS) Vegetation Mapping Inventory (VMI) Program is an effort to classify, describe, and map existing vegetation communities in national park units throughout the United States. The NPS VMI Program is managed by the NPS Natural Resource Stewardship and Science Inventory and Monitoring Program and provides baseline vegetation information to natural resource managers, researchers, and ecologists. The U.S. Geological Survey Upper Midwest Environmental Sciences Center, NatureServe, and NPS Great Smoky Mountains National Park (GRSM, also referred to as the “Park”) have completed vegetation classification and mapping of GRSM, including the Foothills Parkway, for the NPS VMI Program. Mappers, ecologists, and botanists collaborated to affirm vegetation types of GRSM and to determine how best to map the vegetation types by using aerial imagery. A vegetation classification developed in 2003 by NatureServe and the NPS served as a foundation to further classify and map the vegetation types of the Park. Data from an additional 10 vegetation plots supported vegetation types either rare or not documented in the 2003 classification. Data from 203 verification sites were collected to test the field key to vegetation types and the application of vegetation types to a sample set of map polygons. Furthermore, data from 972 accuracy assessment (AA) sites were collected (of which 966 were used to test accuracy of the vegetation map layer). This GRSM vegetation mapping project identified 112 vegetation types consisting of 105 association types in the U.S. National Vegetation Classification (USNVC), 2 “park-special” types, 1 “map-special” type, and 4 cultural types in the USNVC. To map the vegetation and land cover of GRSM, 52 map classes were developed. Of these 52 map classes, 46 represent natural (including ruderal) vegetation types, most of which types are recognized in the USNVC. For the remaining 6 of the 52 map classes, 4 represent USNVC cultural types for agricultural and developed areas, and 2 represent non-USNVC types for nonvegetated open water and nonvegetated rock. Features were interpreted from viewing four-band digital aerial imagery using digital onscreen three-dimensional stereoscopic workflow systems in geographic information systems; digital aerial imagery was collected during September 23–October 30, 2015. The interpreted data were digitally and spatially referenced, thus making the spatial-database layers usable in a geographic information system. Polygon units were mapped to either a 0.5- or 0.25- hectare (ha) minimum mapping unit, depending on vegetation type. A geodatabase containing several feature-class layers and tables provides the locations and data of USNVC vegetation types (vegetation map layer), vegetation plots, verification sites, AA sites, project boundary extent, and aerial image centers and flight lines. Covering 210,875 ha, the feature-class layer and related tables for the vegetation map layer provide 34,084 polygons of detailed attribute data when special modifiers are not considered (average polygon size of 6.2 ha) and 36,589 polygons of detailed attribute data when special modifiers are considered (average polygon size of 5.8 ha). Each map polygon is assigned a map-class code and name and, when applicable, are linked to USNVC classification tables within the geodatabase. The vegetation map extent includes the administrative boundary for GRSM and the Foothills Parkway. A summary report, generated from the vegetation map layer, concludes that the 46 map classes representing natural (including ruderal) vegetation types apply to 99.2% of polygons (33,797 polygons; average size of 6.2 ha) and cover 98.6% of the Park (207,971.4 ha). Further broken down, map classes representing natural vegetation types indicate that the Park is 97.7% forest and woodland (205,882.5 ha), 0.6% shrubland (1,174.6 ha), and 0.4% herbaceous (914.3 ha). Map classes representing cultural vegetation types apply to 0.8% of polygons (259 polygons; average size of 4.9 ha) and cover 0.6% of the Park (1,277.4 ha). Map classes representing nonvegetation open and flowing water and unvegetated rock apply to 0.08% of polygons (28 polygons; average size of 58.1 ha) and cover 0.8% of the Park (1,625.9 ha). A thematic AA study was completed of map classes representing the natural (including ruderal) vegetation types of the Park. Initial AA results were discussed with NPS staff from the Park. Following input from NPS staff on how to handle map classes that fell below accuracy standards, adjustments were made to the vegetation map layer. Final results indicate an overall accuracy of 80.64% (kappa index of 79.96% for chance agreements) based on data from 966 of the 972 AA sites. Most individual map-class themes exceed the NPS VMI Program standard of 80% with a 90% confidence interval. The GRSM vegetation mapping project delivers many geospatial and vegetation data products, including an in-depth project report discussing methods and results, which includes map classification and map-class descriptions. This suite of products also includes descriptions and a field key to vegetation types; a database of vegetation plots, verification sites, and AA sites; digital images of field sites; field data sheets; digital aerial imagery; hardcopy and digital maps; a geodatabase of vegetation and land cover (map layer), field sites (vegetation plots, verification sites, and AA sites), aerial imagery index, project boundary, and metadata; and a contingency table listing AA results. Geospatial products are projected in the Universal Transverse Mercator, Zone 17 North, by using the North American Datum of 1983. Information on the NPS VMI Program and completed mapping projects are on the internet at https://www.nps.gov/im/vegetation-inventory.htm.

North Carolina, Tennessee↗