SEARCH · USGS Science

Results for “Journal of Geochemical Exploration”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10Linked to original sources

USGS2022

Machine learning and data augmentation approach for identification of rare earth element potential in Indiana Coals, USA

Rare earth elements and yttrium (REYs) are critical elements and valuable commodities due to their limited availability and high demand in a wide range of applications and especially in high-technology products. The increased demand and geopolitical pressures motivate the search for alternative sources of REYs, and coal, coal waste, and coal ash are considered as new sources for these critical elements. This research evaluates the REY potential of coals from Indiana (USA). However, although coal data revealed REY potential, it suffered from sparse samples with complete REY measurements. Therefore, we explore the applicability of machine learning (ML) models and data augmentation techniques to demonstrate their applicability to evaluate REY potential in Indiana, and other areas in coal basins, using selected coal parameters (Al2O3, Fe2O3, C, Ash, S, P, Mo, Zn, and As contents) as covariates (indicators). Due to the relatively small sample size with complete REY data in the Indiana Coal Database, two data augmentation techniques (Random Over-Sampling Examples and Synthetic Minority Over-Sampling Technique) were used. Four machine learning algorithms (linear discriminate analysis, support vector machine, random forest, and artificial neural networks) were applied for modeling REY potential as a classification problem. The results show that application of Synthetic Minority Over-Sampling Technique prior to development of the support vector machine (SVM) models generated the best REY classification with an accuracy of 95%. The encouraging results based on Indiana coal data may suggest that a similar approach can be used for other coal basins for screening the locations with REY potential. Those locations then can be targeted for more detailed geochemical surveys to identify most promising areas and evaluate overall REY resources.

Indiana↗

USGS1977

High-resolution gamma-ray spectrometry in uranium exploration

Sedimentary-type uranium deposits accumulate at favorable sites along a migration path which may be kilometers in length. Their source is a large volume of rock from which the uranium has been leached. The geochemical mobilities and half lives of uranium and its daughter products vary widely so that they are transported from the source rocks, at different rates, along the migration path to their ultimate site. The radioactive disequilibrium resulting from this process has been well documented in the immediate vicinity of ore deposits, and disequilibrium is commonly recorded on gamma-ray logs up the hydraulic gradient from uranium ore. Little is known about the state of secular equilibrium in the leached host rocks, which often represent the only part of the migration path that is at or near the surface and is thus most accessible to the exploration geophysicist. High-resolution gamma-ray spectrometry provides a means of investigating the disequilibrium associated with uranium leaching and migration. Direct measurement of uranium can be made by this method, and the equivalent weight percents can be determined for six of the seven daughter-product decay groups that characterize the state of radioactive equilibrium. The technique has been used quantitatively in laboratory studies, where the results compare favorably with radiochemical analyses; field experiments suggest that semi-quantitative data may be obtained at the outcrop.

Journal of Research of the U.S. Geological Survey↗

USGS2014

Executive summary

Fossil fuels from the Appalachian basin region have been major contributors to the Nation’s energy needs over much of the last three centuries. Early records indicate that Appalachian coal was first mined in the middle 1700s (Virginia and Pennsylvania) and was used sparingly to fuel colonial settlements and, later, a fledgling industrial-based economy along the eastern seaboard of the United States (de Witt and Milici, 1989). In 2011, central Appalachian basin coal production accounted for approximately 77 percent of all U.S. metallurgical (or coking) coal and 29 percent of total U.S. production (U.S. Energy Information Administration, 2013). Following initial discoveries and commercial use in western New York (1821) and Ohio and West Virginia (mid-1830s), the Appalachian petroleum (oil and gas) industry began in earnest in 1859 with the discovery of oil at the Drake well in northwestern Pennsylvania. Between 1860 and 1989, the Appalachian basin produced more than 2.5 billion barrels of oil (BBO) and more than 30 trillion cubic feet of gas (TCFG) from more than 500,000 wells (de Witt and Milici, 1989). Although both oil and gas continue to be produced in the Appalachian basin, most new wells in the region are drilled in shale reservoirs to produce natural gas. Appalachian coal and petroleum resources are still available in sufficient quantities to contribute significantly to the Nation’s energy needs. For example, the U.S. Energy Information Administration (2010) estimated that there are 6,484 million short tons of recoverable coal reserves in the Appalachian basin. Similarly, about 14.7 billion barrels of oil equivalent (BBOE) (1.2 BBO+81 TCFG [or 13.5 BBOE]) of recoverable Appalachian basin oil and gas remain available of an estimated ultimate endowment of approximately 25.5 billion BBOE (cumulative production + reserves + estimated recoverable undiscovered resources) (this volume, chap. C.1). U.S. Geological Survey (USGS) Professional Paper 1708 is a modern, indepth collection of reports, cross sections, and maps that describe the geology of the Appalachian basin and its fossil fuel resources. Several of the chapters have been published in outside journals or as other USGS publications. Although this volume is not a comprehensive regional treatment of all notable geologic and fossil fuel localities in the Appalachian basin, the selected study areas and topics presented in the chapters cover large segments of the basin and a wide range of stratigraphic intervals. As the title implies, this volume addresses topics that refer to the locations of coal and petroleum accumulations, the stratigraphic and structural framework, and the geochemical characteristics of the coal beds and petroleum in the basin, as well as the results and documentation of recent USGS assessments of coal, oil, and gas resources in the basin. Many of the maps and accompanying data supporting the reports in this volume are available as downloadable geographic information system (GIS) data files (such as selected coal beds, selected oil and gas fields, locations of oil and gas wells, coal production, coal chemistry, total petroleum system (TPS) boundaries, and bedrock geology). Log ASCII Standard (LAS) files for geophysical (gamma ray) wireline well logs also are included. This publication supplements and updates older USGS regional studies of Appalachian basin coal and petroleum resources such as those by Arndt and others (1968) and the numerous contributors to USGS Miscellaneous Map Series I−917 (for example, Harris and others, 1978), respectively. USGS Professional Paper 1708 is intended primarily for geoscientists in academia, industry, and government who are interested in Appalachian basin geology and its coal and petroleum resources. Other users, however, may find the wide variety of topics, papers, and digital images of value for landuse and policy planning issues. Among the anticipated benefits of the report are improvements in (1) resource assessment estimates and methodology, (2) exploration strategies, (3) basin models, and (4) energy use policies.

Appalachian Basin↗

USGS2025

Relating systematic molecular and textural properties of graptolite pyrolyzed via gold tube hydrous pyrolysis: Implications for thermal proxies in lower Paleozoic marine shales

A series of gold tube pyrolysis experiments (72 h, 300–550 °C, 50 MPa) conducted on a graptolite-rich lower Paleozoic marine shale generated pyrolysis residues for a comprehensive evaluation of the molecular and structural variability of three types of graptolite periderm. Organic petrology, Raman spectroscopy, and field emission scanning electron microscopy (FE-SEM) with energy dispersive spectroscopy (EDS) were combined to evaluate the thermal evolution process. The three types of graptolite periderm, namely granular, non-granular, and nodular graptolite, were analyzed by Raman spectroscopy wherein point measurements were obtained after the maceral was identified and the location verified by organic petrology. Distinct thermal evolution pathways among non-granular, granular, and nodular graptolite periderms were recorded. The evolution patterns of the Raman parameters, particularly D1 and G bands, highlight the differences in geochemical composition of the graptolite periderm types and the alteration of molecular structure with increasing thermal maturity. Raman parameters D1 (position of the D1 peak), G-FWHM (full width at half maximum of the G peak), and ratios D1-FWHM/G-FWHM (full width at half maximum of the D1 peak ratioed to G-FWHM) and A D1 /A G (ratio of D1 and G peak intensities) showed effectiveness in assessing thermal maturity. Bireflectance with increasing gold tube pyrolysis temperature followed a hierarchy: non-granular > granular > nodular, reflecting different molecular alignment intensities. Qualitative FE-SEM evaluation showed that fine-grained mineral inclusions (primarily Fe-sulfide as determined via EDS) were associated with the graptolite populations, with granular graptolite containing greater amounts of coarser-grained (e.g., ∼300–1400 nm) mineral inclusions relative to non-granular and nodular graptolite, which contain finer-grained (e.g., ∼100–200 nm) inclusions difficult to resolve with optical microscopy. These findings are investigated to highlight the mechanisms that drive organic matter evolution within graptolite during thermal maturation, as well as to explore some of the limitations of using spectroscopic parameters as thermal maturity proxies.

International Journal of Coal Geology↗

USGS2018

Multi-year high-frequency hydrothermal monitoring of selected high-threat Cascade Range volcanoes

From 2009 to 2015 the U.S. Geological Survey (USGS) systematically monitored hydrothermal behavior at selected Cascade Range volcanoes in order to define baseline hydrothermal and geochemical conditions. Gas and water data were collected regularly at 25 sites on 10 of the highest-risk volcanoes in the Cascade Range. These sites include near-summit fumarole groups and springs/streams that show clear evidence of magmatic influence (high 3 He/ 4 He ratios and/or large fluxes of magmatic CO 2 or heat). Site records consist mainly of hourly temperature and hydrothermal-flux data. Having established baseline conditions during a multiyear quiescent period, the USGS reduced monitoring frequency from 2015 to present. The archived monitoring data are housed at (doi:10.5066/F72N5088). These data (1) are suitable for retrospective comparison with other continuous geophysical monitoring data and (2) will provide context during future episodes of volcanic unrest, such that unrest-related variations at these thoroughly characterized sites will be more clearly recognizable. Relatively high-frequency year-round data are essential to achieve these objectives, because many of the time series reveal significant diurnal, seasonal, and inter-annual variability that would tend to mask unrest signals in the absence of baseline data. Here we characterize normal variability for each site, suggest strategies to detect future volcanic unrest, and explore deviations from background associated with recent unrest.

California, Oregon, Washington↗

USGS1998

Groundwater geochemistry of Isla de Mona, Puerto Rico

In this study, we explore the differences between the hydrogeochemical processes observed in a setting that is open to input from the land surface and in a setting that is closed with respect to input from the land surface. The closed setting was a water-filled passage in a cave. Samples of groundwater and of a solid that appeared to be suspended in the relatively fresh region of saline-freshwater mixing zone were collected. The solid was determined to be aragonite. Based on the analyses of the composition and saturation state of the groundwater, the mixing of fresh and saline water and precipitation of aragonite are the controlling geochemical processes in this mixing zone. We found no evidence of sulfate reduction. Thus, this mixing zone is similar to that observed in Caleta Xel Ha, Quintana Roo, also a system that is closed with respect to input from the land surface. The open setting was an unconfined aquifer underlying the coastal plain along which four hand-dug wells are located. Two wells are at the downgradient ends of inferred flowpaths and one is along a flowpath. The composition of the groundwater in the downgradient wells is sulfide-rich and brackish. In contrast, at the well located along a flow line, the groundwater is oxygenated and brackish. All groundwater is oversaturated with respect to calcite, aragonite, and dolomite. The composition is attributed to mixing of fresh and saline groundwater, CO2 outgassing, and sulfate reduction. This mixing zone is geochemically similar to that observed in blue holes and cenotes.

Journal of Cave and Karst Studies↗

USGS2020

The chemostratigraphy of the Murray formation and role of diagenesis at Vera Rubin ridge in Gale crater, Mars, as observed by the ChemCam instrument

Geochemical results are presented from Curiosity’s exploration of the Vera Rubin ridge (VRR), in addition to the full chemostratigraphy of the predominantly lacustrine mudstone Murray formation up to and including VRR. VRR is a prominent ridge flanking Aeolis Mons (informally Mt. Sharp), the central mound in Gale crater, Mars, and was a key area of interest for the Mars Science Laboratory mission. ChemCam data show that VRR is overall geochemically similar to lower-lying members of the Murray formation, even though the top of VRR is characterized by strong hematite spectral signatures as observed from orbit. While overall geochemically similar, VRR is characterized by a prominent decrease in Li abundance and Chemical Index of Alteration across the ridge. This decrease follows the morphology of the ridge rather than elevation and is inferred to reflect a non-depositionally controlled decrease in clay mineral abundance in VRR rocks. Additionally, a notable enrichment in Mn above baseline levels is observed on VRR. While not supporting a single model, the results suggest that VRR rocks were likely affected by multiple episodes of post-depositional groundwater interactions that made them more erosionally resistant than surrounding Murray rocks – thus resulting in the modern-day ridge after subsequent erosion.

Journal of Geophysical Research: Planets↗

USGS1978

Porphyry copper exploration model for northern Sonora, Mexico

The regional tectonic pattern of the porphyry copper province of northern Sonora, Mexico, is similar to, but more complex than, the Colorado mineral belt. Four northeast-trending shear zones, spaced at 30- to 50-kilometer intervals from Hermosillo, Mexico, north to Nogales, Mexico, are interpreted from analysis of lineament data from Landsat-1 images. From comparison with other areas, these zones are believed to have Precambrian ancestry. North-northwest-trending lineaments, which commonly occur along range fronts, are interpreted to be the principal basin and range faults. North-south- and west-northwest-trending lineaments are believed to be related to lesser faults and fractures. Areas of hydrothermal alteration have been mapped on a regional scale by use of digital image-processing techniques. These altered areas occur on the flanks of the northeast-trending shear zones, generally near intersections with north-northwest-trending lineaments. This tectonic framework with associated alteration is similar to patterns in the Colorado Plateau, the porphyry copper province of Arizona, and central Mexico and is supported by relationships found in limited local mapping. The pattern of northeast-trending shear zones and north-northwest-trending faults in northern Sonora closely resembles the tectonic framework of the Colorado mineral belt. The younger sedimentary and volcanic cover, however, has not been eroded in Sonora as it has been in the Colorado mineral belt. This comparison with the Colorado mineral belt suggests that mineral deposits are most likely to be found in altered areas where a northeast-trending shear zone is intersected by north-northwest-trending faults. Seven areas with these characteristics have been defined in Sonora and are being evaluated by means of regional geophysical and geochemical data.

Sonora↗

USGS2019

A 50-year Sr/Ca time series from an enclosed, shallow-water Guam coral: In situ monitoring and extraction of a temperature trend, annual cycle, and ENSO and PDO signals

Located on the northern edge of the West Pacific Warm Pool and having a developed economy and modern infrastructure, Guam is well positioned and equipped for obtaining natural records of the west Pacific maritime paleoclimate. This study was a proof of concept to explore whether useful climate proxy records might be obtained from coral at readily accessible, even if geochemically nonoptimal, coastal sites. A 50-year Sr/Ca record (1960–2010) was thus obtained from a shallow-water, near-shore Porites lutea colony at a recreational facility inside Guam's Apra Harbor and compared with local and regional meteorological records, including the El Niño–Southern Oscillation (ENSO) and Pacific Decadal Oscillation (PDO) indices. The accessibility of the site enabled documentation of relevant environmental variables for 16 months (September 2009–December 2010): seawater δ 18 O, pH, seawater cations, and nitrate. Time series of seawater δ 18 O, pH, and cations show evidence of freshwater input from direct rainfall and stream discharge into the harbor. An anomalously higher mean and variable concentrations of Ba suggest the presence of river-borne, fine-grained terrigenous sediment. Nevertheless, the Sr/Ca time series reproduces a long-term warming trend seen in historical records of local air temperature and regional sea-surface temperature (SST) and closely tracks the ENSO and PDO indices over the entire 50-year record. The consistency of the results with Guam's historical instrumental records, previous coral δ 18 O results from Guam obtained by others, and previous Sr/Ca proxy results for SST in similar environments elsewhere demonstrate that accessible near-shore sites—where environmental conditions can be monitored—can produce useful Sr/Ca records of local and regional climate phenomena.

Journal of Coastal Research↗

USGS2021

Gulf of Mexico blue hole harbors high levels of novel microbial lineages

Exploration of oxygen-depleted marine environments has consistently revealed novel microbial taxa and metabolic capabilities that expand our understanding of microbial evolution and ecology. Marine blue holes are shallow karst formations characterized by low oxygen and high organic matter content. They are logistically challenging to sample, and thus our understanding of their biogeochemistry and microbial ecology is limited. We present a metagenomic and geochemical characterization of Amberjack Hole on the Florida continental shelf (Gulf of Mexico). Dissolved oxygen became depleted at the hole’s rim (32 m water depth), remained low but detectable in an intermediate hypoxic zone (40–75 m), and then increased to a secondary peak before falling below detection in the bottom layer (80–110 m), concomitant with increases in nutrients, dissolved iron, and a series of sequentially more reduced sulfur species. Microbial communities in the bottom layer contained heretofore undocumented levels of the recently discovered phylum Woesearchaeota (up to 58% of the community), along with lineages in the bacterial Candidate Phyla Radiation (CPR). Thirty-one high-quality metagenome-assembled genomes (MAGs) showed extensive biochemical capabilities for sulfur and nitrogen cycling, as well as for resisting and respiring arsenic. One uncharacterized gene associated with a CPR lineage differentiated hypoxic from anoxic zone communities. Overall, microbial communities and geochemical profiles were stable across two sampling dates in the spring and fall of 2019. The blue hole habitat is a natural marine laboratory that provides opportunities for sampling taxa with under-characterized but potentially important roles in redox-stratified microbial processes.

Interational Society of Microbial Ecology (ISME) J↗

USGS2013

Using simulated maps to interpret the geochemistry, formation and quality of the Blue Gem Coal Bed, Kentucky, USA

This study presents geostatistical simulations of coal-quality parameters, major oxides and trace metals for an area covering roughly 812 km 2 of the Blue Gem coal bed in southeastern Kentucky, USA. The Blue Gem, characterized by low ash yield and low sulfur content, is an important economic resource. Past studies have characterized the Blue Gem's geochemistry, palynology and petrography and inferred a depositional setting of a planar peat deposit that transitioned to slightly domed later in its development. These studies have focused primarily on vertical geochemical trends within the coal bed. Simulated maps of chemical elements derived from 45 measured sample locations across the study area provide an opportunity to observe changes in the horizontal direction within the coal bed. As the Blue Gem coal bed shows significant vertical chemical trends, care was taken in this study to try to select samples from a single, middle portion of the coal. By revealing spatial distribution patterns of elements across the middle of the bed, associations between different components of the coal can be seen. The maps therefore help to provide a picture of the coal-forming peat bog at an instant in geologic time and allow interpretation of a depositional setting in the horizontal direction. Results from this middle portion of the coal suggest an association of SiO 2 with both K 2 O and TiO 2 in different parts of the study area. Further, a pocket in the southeast of the study area shows elevated concentrations of elements attributable to observed carbonate-phase minerals (MgO, CaO, Ba and Sr) as well as elements commonly associated with sulfide-phase minerals (Cu, Mo and Ni). Areas of relatively high ash yield are observed in the north and south of the mapped area, in contrast to the low ash yields seen towards the east. Additionally, we present joint probability maps where multiple coal-quality parameters are plotted simultaneously on one figure. This application allows researchers to investigate associations of more than two components in a straight-forward manner useful in guiding resource exploration.

Kentucky↗

USGS1991

A geochemical model of the Platanares geothermal system, Honduras

Results of exploration drilling combined with results of geologic, geophysical, and hydrogeochemical investigations have been used to construct a geochemical model of the Platanares geothermal system, Honduras. Three coreholes were drilled, two of which produced fluids from fractured Miocene andesite and altered Cretaceous to Eocene conglomerate at 450 to 680 m depth. Large volume artesian flows of 160-165??C, predominantly bicarbonate water are chemically similar to, but slightly less saline than widespread boiling hot-spring waters. The chemistry of the produced fluid is dominated by equilibrium reactions in sedimentary rocks at greater depths and higher temperatures than those measured in the wells. Chemical, isotope, and gas geothermometers indicate a deep fluid temperature of 200-245??C and reflect a relatively short residence time in the fractures feeding the wells. Chloride-enthalpy relations as well as isotopic and chemical compositions of well discharges, thermal springs, and local cold waters support a conceptual model of ascending high-temperature (minimum 225??C) parent fluid that has cooled conductively to form the 160-165??C shallow (to 680 m) fluid encountered by the wells. The hot-spring waters are formed by boiling and steam loss from more or less conductively cooled parent fluid. The more dilute boiling spring waters (Cl = ???32 mg/kg) have cooled from > 225??C to about 160??C by conduction and from 160??C to 98??C by boiling. The most concentrated boiling spring waters (Cl = 37 mg/kg) have cooled from > 225??C to about 200??C by conduction and from 200??C to 98??C by boiling. Intermediate concentrations reflect mixed cooling paths. ?? 1991.

Journal of Volcanology and Geothermal Research↗

USGS2006

Sulfate deposition in subsurface regolith in Gusev crater, Mars

Excavating into the shallow Martian subsurface has the potential to expose stratigraphic layers and mature regolith, which may hold a record of more ancient aqueous interactions than those expected under current Martian surface conditions. During the Spirit rover's exploration of Gusev crater, rover wheels were used to dig three trenches into the subsurface regolith down to 6-11 cm depth: Road Cut, the Big Hole, and The Boroughs. A high oxidation state of Fe and high concentrations of Mg, S, Cl, and Br were found in the subsurface regolith within the two trenches on the plains, between the Bonneville crater and the foot of Columbia Hills. Data analyses on the basis of geochemistry and mineralogy observations suggest the deposition of sulfate minerals within the subsurface regolith, mainly Mg-sulfates accompanied by minor Ca-sulfates and perhaps Fe-sulfates. An increase of Fe2O3, an excess of SiO2, and a minor decrease in the olivine proportion relative to surface materials are also inferred. Three hypotheses are proposed to explain the geochemical trends observed in trenches: (1) multiple episodes of acidic fluid infiltration, accompanied by in situ interaction with igneous minerals and salt deposition; (2) an open hydrologic system characterized by ion transportation in the fluid, subsequent evaporation of the fluid, and salt deposition; and (3) emplacement and mixing of impact ejecta of variable composition. While all three may have plausibly contributed to the current state of the subsurface regolith, the geochemical data are most consistent with ion transportation by fluids and salt deposition as a result of open-system hydrologic behavior. Although sulfates make up >20 wt.% of the regolith in the wall of The Boroughs trench, a higher hydrated sulfate than kieserite within The Boroughs or a greater abundance of sulfates elsewhere than is seen in The Boroughs wall regolith would be needed to hold the structural water indicated by the water-equivalent hydrogen concentration observed by the Gamma-Ray Spectrometer on Odyssey in the Gusev region.

Journal of Geophysical Research E: Planets↗

USGS2022

Perspectives on premetamorphic stratabound tourmalinites

Stratabound tourmalinites are metallogenically important rocks that locally show a close spatial association with diverse types of mineralization, especially volcanogenic massive sulfides (VMS) and clastic-dominated (CD) Zn-Pb deposits. These tourmalinite occurrences pan the geologic record from Eoarchean to Jurassic. Host lithologies are dominated by clastic metasedimentary rocks but in some areas include metavolcanic rocks, marble, or metaevaporites. Stratabound and stratiform (conformable) tourmalinites commonly display sedimentary structures such as graded beds, cross-beds, and rip-up clasts. In most cases, field and microtextural relationships are consistent with a synsedimentary to the early diagenetic introduction of boron as a precursor to tourmaline formation. Whole-rock geochemical data for major, trace, and rare earth elements (REE) provide valuable insights into tourmalinite origins. Al-normalized values relative to those for least-altered host metasedimentary rocks suggest that tourmalinites in proximal settings at or near hydrothermal vent sites characterized by high fluid/rock regimes (e.g., Sullivan Pb-Zn-Ag deposit, Canada) have very different signatures than those in low fluid/rock, distal settings (e.g., Broken Hill Pb-Zn-Ag deposit, Australia). The high fluid/rock regimes at Sullivan show large mass changes of +60 % for Mg and +180 % for Mn, as well as large variations in abundances of light and middle REE. In contrast, tourmalinite formation in low fluid/rock regimes yields minimal Al-normalized changes in major elements, trace elements, and REE. Boron isotope values of tourmalinite-hosted tourmaline vary widely from -26.1 to +27.5 ‰, and are attributed mainly to boron sources (e.g., sediments, evaporites) with generally minor influence from processes such as formational temperature, fluid/rock ratio, and secular variation in seawater δ 11 B values. Laterally extensive stratiform tourmalinites formed mainly by syngenetic or early diagenetic processes on or beneath the seafloor. The syngenetic process is attributed to the interaction of vented B-rich brines with aluminous minerals in sediments, whereas the diagenetic process involves the selective replacement of aluminous sediments by B-rich fluids. Modern examples of tourmalinites, as yet undiscovered, may exist in metalliferous sediments of the Red Sea and the eastern Pacific Ocean, in altered volcaniclastic sediments within active seafloor-hydrothermal systems of the South Pacific, and in hydrothermal mounds and vents associated with mafic sill complexes in extensional basins as in the North Sea and South China Sea. Stratabound tourmalinites that contain base-metal sulfides, high Mn concentrations (>1 wt. % MnO), or positive Eu anomalies can be valuable exploration guides for base-metal sulfide deposits in sedimentary and volcanic terranes.

Journal of Geosciences↗

USGS2003

Inferences on the hydrothermal system beneath the resurgent dome in Long Valley Caldera, east-central California, USA, from recent pumping tests and geochemical sampling

Quaternary volcanic unrest has provided heat for episodic hydrothermal circulation in the Long Valley caldera, including the present-day hydrothermal system, which has been active over the past 40 kyr. The most recent period of crustal unrest in this region of east-central California began around 1980 and has included periods of intense seismicity and ground deformation. Uplift totaling more than 0.7 m has been centered on the caldera's resurgent dome, and is best modeled by a near-vertical ellipsoidal source centered at depths of 6-7 km. Modeling of both deformation and microgravity data now suggests that (1) there are two inflation sources beneath the caldera, a shallower source 7-10 km beneath the resurgent dome and a deeper source ???15 km beneath the caldera's south moat and (2) the shallower source may contain components of magmatic brine and gas. The Long Valley Exploration Well (LVEW), completed in 1998 on the resurgent dome, penetrates to a depth of 3 km directly above this shallower source, but bottoms in a zone of 100??C fluid with zero vertical thermal gradient. Although these results preclude extrapolations of temperatures at depths below 3 km, other information obtained from flow tests and fluid sampling at this well indicates the presence of magmatic volatiles and fault-related permeability within the metamorphic basement rocks underlying the volcanic fill. In this paper, we present recently acquired data from LVEW and compare them with information from other drill holes and thermal springs in Long Valley to delineate the likely flow paths and fluid system properties under the resurgent dome. Additional information from mineralogical assemblages in core obtained from fracture zones in LVEW documents a previous period of more vigorous and energetic fluid circulation beneath the resurgent dome. Although this system apparently died off as a result of mineral deposition and cooling (and/or deepening) of magmatic heat sources, flow testing and tidal analyses of LVEW water level data show that relatively high permeability and strain sensitivity still exist in the steeply dipping principal fracture zone penetrated at a depth of 2.6 km. The hydraulic properties of this zone would allow a pressure change induced at distances of several kilometers below the well to be observable within a matter of days. This indicates that continuous fluid pressure monitoring in the well could provide direct evidence of future intrusions of magma or high-temperature fluids at depths of 5-7 km. ?? 2003 Elsevier B.V. All rights reserved.

California↗

USGS2006

Metallogeny of the Great Basin: Crustal evolution, fluid flow, and ore deposits

The Great Basin physiographic province in the Western United States contains a diverse assortment of world-class ore deposits. It currently (2006) is the world’s second leading producer of gold, contains large silver and base metal (Cu, Zn, Pb, Mo, W) deposits, a variety of other important metallic (Fe, Ni, Be, REE’s, Hg, PGE) and industrial mineral (diatomite, barite, perlite, kaolinite, gallium) resources, as well as petroleum and geothermal energy resources. Ore deposits are most numerous and largest in size in linear mineral belts with complex geology. U.S. Geological Survey (USGS) scientists are in the final year of a research project initiated in the fall of 2001 to increase understanding of relations between crustal evolution, fluid flow, and ore deposits in the Great Basin. Because of its substantial past and current mineral production, this region has been the focus of numerous investigations over the past century and is the site of ongoing research by industry, academia, and state agencies. A variety of geoinformatic tools was used to organize, reinterpret, and display, in space and time, the large amounts of geologic, geophysical, geochemical, and hydrologic information deemed pertinent to this problem. This information, in combination with concentrated research on (1) critical aspects of the geologic history, (2) an area in northern Nevada that encompasses the major mineral belts, and (3) important mining districts and deposits, is producing new insights about the interplay between key tectonic events, hydrothermal fluid flow, and ore genesis in mineral belts. The results suggest that the Archean to Holocene history of the Great Basin was punctuated by several tectonic events that caused fluids of different origins (sea water, basinal brine, meteoric water, metamorphic water, magmatic water) to move through the crust. Basement faults reactivated during these events localized deformation, sedimentation, magmatism, and hydrothermal fluid flow in overlying rocks to form mineral belts that contain ore deposits of different types and ages that are locally superimposed (demonstrating inheritance). Fluid flow in these systems also was influenced by the distribution of permeable lithologies and paleotopographic highs and lows. Hydrothermal fluids evolved from their initial chemistries towards compositions that reflect the ƒ O 2 and ƒ S 2 buffering capacity of, and the ligands and metals present in, the rocks (±older mineralization) through which they moved. In northern Nevada, where gold deposits are relatively common, carbonaceous, pyritic strata buffered fluids of diverse origins to H 2 S-rich compositions so they could transport gold repeatedly over Paleozoic-Cenozoic time (convergent evolution). Ore formed where metal-laden fluids encountered effective physicochemical traps. Maps of Neogene basin fill and erosion surfaces identify areas where preexisting ore deposits have been progressively exposed or concealed. Comparisons with analogous terrains and deposit types in other parts of the world provide global context. The initial findings and some of the databases, geologic maps, sections, reconstructions, hydrogeologic models, topical syntheses, regional overviews, short courses, field guides, and deposit comparisons produced by project staff and associated managers, contractors, and collaborators have been presented in numerous abstracts, symposia, USGS publications, and professional journals over the last 5 years (see the extensive bibliography). Notable among these was the 2005 Geological Society of Nevada symposium in Reno, Nevada, and the 2005 Geological Society of America annual meeting in Salt Lake City, Utah, where project results were presented to audiences from around the nation and world. The final results of the project will be submitted for publication in 2007 to appropriate USGS and professional journals. A special issue of GEOSPHERE, scheduled for publication in 2007, will be devoted to the results of this project and related work. This special issue will reach an international audience and be available worldwide on the internet. Much of the research for this project has concentrated on areas that will receive the focused attention of the mining industry in the future. As such, the data and interpretations generated by this project have direct use for land-use managers in Federal, State, and local agencies. Improved hydrogeologic models developed by this project will considerably enhance ongoing and future water resource investigations in the region. The increased understanding of when, where, and how hydrothermal systems produce significant economic deposits has direct uses for mineral exploration and for future USGS mineral resource assessments in the Great Basin and other parts of the world.

Great Basin↗

USGS2022

The geochemical and textural transition between the Reef Package and its hanging wall, Stillwater Complex, Montana, USA

The highest grade Pd-Pt deposit on Earth, the J-M Reef, is hosted in coarse-grained to pegmatoidal cumulates called the Reef Package. Decades of mine development of the J-M Reef have revealed that a distinct discontinuity in rock fabric marks the top of the rock unit that hosts economic-grade sulfide mineralization. Mine geologists refer to this discontinuity as the hanging wall contact. This contact is the top of the Reef Package and is always locatable—either by the change in rock fabric or by distinctive hanging wall textures of silicate minerals—even when the reef sulfide mineralization is absent. This rather subtle textural feature is used reliably by mine geologists to follow the Reef during exploration and mine development. Although some high tenor sulfides (>1000 ppm Pd in 100% sulfide) are found sporadically in the hanging wall cumulates, these accumulations are too small to be economically viable. We present quantitative rock fabric data for four Reef Package and hanging wall intersections collected by electron back-scattered diffraction (EBSD). Plagioclase fabrics in the hanging wall are characterized by low variance in grain sizes and a strong point maximum concentration of (010) and a perpendicular girdle distribution of [100] consistent with an axial B-type fabric. These fabrics are indicative of either compaction of the crystal mush or crystal settling of nucleated crystals, the bulk magma in a chamber. Conversely, the fabrics of the Reef Package show higher variance grain in size distributions and weak to undeveloped preferred orientation of plagioclase crystals that did not undergo significant alignment or textural equilibration of plagioclase grains. The absence of foliation in the Reef Package stands in contrast both to hanging wall fabrics and to other reported EBSD datasets of plagioclase crystals orientations from the Bushveld Complex, the Skaergaard Intrusion, and the Rum Intrusion. Furthermore, plagioclase crystal size distributions for the Reef Package show flatter slopes and convex profiles with fewer crystals at small size fractions indicating the dissolution of small crystals during partial melting and textural coarsening (i.e . Ostwald ripening) and crystal growth. Crystal growth was favored over the nucleation of new crystals during prolonged interaction with a hot infiltrating melt into the resident mush resulting in the coarse-grained textures of the Reef Package cumulates. The hanging wall contact represents a boundary between partially remelted crystal mush of the Reef Package, where sulfide mineralization formed and accumulated, and an overlying essentially barren cumulate pile. The hanging wall cumulates formed following the cessation of footwall erosion and the resumption of crystal accumulation by normal magma chamber processes.

Montana↗

USGS2007

A stream sediment geochemical survey of the Ganga River headwaters in the Garhwal Himalaya

This study models geochemical and adjunct geologic data to define provinces that are favorable for radioactive-mineral exploration. A multi-element bed-sediment geochemical survey of streams was carried out in the headwaters region of the Ganga River in northern India. Overall median values for uranium and thorium (3.6 and 13.8 ppm; maxima of 4.8 and 19.0 ppm and minima of 3.1 and 12.3 ppm respectively) exceed average upper crustal abundances (2.8 and 10.7 ppm) for these radioactive elements. Anomalously high values reach up to 8.3 and 30.1 ppm in thrust zone rocks, and 11.4 and 22.5 ppm in porphyroids. At their maxima, these abundances are nearly four- and three-fold (respectively) enriched in comparison to average crustal abundances for these rock types. Deformed, metamorphosed and sheared rocks are characteristic of the main central thrust zone (MCTZ). These intensively mylonitized rocks override and juxtapose porphyritic (PH) and proterozoic metasedimentary rock sequences (PMS) to the south. Granitoid rocks, the major protoliths for mylonites, as well as metamorphosed rocks in the MCT zone are naturally enriched in radioelements; high values associated with sheared and mylonitized zones are coincident with reports of radioelement mineralization and with anomalous radon concentrations in soils. The radioelement abundance as well as REE abundance shows a northward enrichment trend consistent with increasing grade of metamorphism indicating deformation-induced remobilization of these elements. U and Th illustrate good correlation with REEs but not with Zr. This implies that zircon is not a principal carrier of U and Th within the granitoid-dominant thrust zone and that other radioelement-rich secondary minerals are present in considerable amounts. Thus, the relatively flat, less fractionated, HREE trend is also not entirely controlled by zircon. The spatial correlation of geologic boundary zones (faults, sheared zones) with geochemical and with geophysical (Rn) anomalies infers ore mineralization by hydrothermal processes generated during multiple episodes of deformation and thrusting. The geologic setting of the anomalies also suggests that crystalline rocks (MCT Zone) along the nearly 2500 km length of the LesserHimalayan belt, where in the vicinity of thrust and fault zones, have potential for radioelement mineralization. Zones of higher concentrations of radioelements delineated by this study and locations of anomalous radon discharge determined by other investigations may indicate a potential health hazard over the long term. However, the low human population density precludes direct manifestation of health effects attributable to chronic exposure to these radioelements; however, the magnitude of natural concentrations suggests the need for more detailed studies and monitoring.

Geochemical Journal↗