SEARCH · USGS Science
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This report provides a preliminary description of the geologic setting of the lunar samples returned fromt he Apollo 12 mission. A more complete interpretation of the geology of the site will be prepared after thorough analysis of the data.
In 1879, Congress established the U.S Geological Survey for "the classification of the public lands and the examination of the geological structure, mineral resources, and products of the national domain." Throughout the past 103 years, the Survey has successfully fulfilled these responsibilities, but it has also been responsive to changing national needs. This responsiveness is well exemplified by the development of the agency's natural hazard programs. Our orignial mision has been expanded to include formal investigations of earthquakes, volcanic eruptions, ground failures, and flood hazards.
The Casa Diablo Mountain quadrangle was mapped in the summers of 1952 and 1953 by the U.S. Geological Survey in cooperation with the California State Division of Mines as part of a study of potential tungsten-bearing areas.
The Shalipayco Zn–Pb deposit, in central Peru, is composed of several stratabound orebodies, the largest of which are the Resurgidora and Intermedios, contained in carbonate rocks of the Upper Triassic Chambará Formation, Pucará group. Petrography suggests that a single ore-forming episode formed sphalerite and galena within vugs, open spaces, and fractures. Three-dimensional (3D) geological modeling has allowed division of the Chambará Formation into four members (Chambará I, II, III, and IV) that better define lithological controls on sulfide formation. Diagenetic replacement of evaporite minerals with the organic matter (OM) presence likely generated secondary porosity and H 2 S accumulation by bacterial sulfate reduction (BSR), providing ground preparation for the later Zn–Pb mineralizing event. The least-altered host rocks have C–O isotope compositions of 1.8 ± 0.1‰ (VPDB) and 29.9 ± 2.1‰ (VSMOW), respectively, within the Triassic marine carbonate ranges. Early dolomite contains lighter C–O composition (1.1 ± 0.9 and 23.8 ± 2.9‰, respectively) consistent with OM decomposition during burial diagenesis. Post-mineralization calcite has still lighter C–O composition (− 5.1 and 13.3‰, respectively), suggesting meteoric water that had migrated through organic-rich strata. The strontium isotopes of Mitu group basalts (0.709654–0.719669) indicate it as a possible, but not the unique source of strontium and probably of other metals. Highly negative sulfide sulfur isotope values (− 23.3 to − 6.2‰ (VCDT)) indicate a major component of the ore sulfur derived ultimately from BSR. However, multiple lines of evidence suggest that preexisting H 2 S underwent thermochemical redox cycling prior to ore formation. The influx of hot metalliferous brines to dolomitized zones containing trapped H 2 S is the preferred model for ore deposition at Shalipayco.
The Exploration of the Fortieth Parallel promised, first, a study and description of all the natural resources of the mountain country near the Union and Central Pacific railroads; secondly, the completion of a continuous geological section across the widest expansion of the great Cordilleran Mountain System.
This digital geospatial data set consists of points and lines representing symbolization of geologic structure information for the Arapahoe and Laramie-Fox Hills aquifers. The symbols were developed as part of the report in "Structure, Outcrop, and Subcrop of the Bedrock Aquifers Along the Western Margin of the Denver Basin, Colorado" (Robson and others, 1998).
A modification of the one-sixth order semi-quantitative emission spectrographic method for the analysis of 30 elements in geologic materials (Grimes and Marranzino 1968) improves the limits of determination of some volatile to moderately volatile elements. The modification uses a compound-pendulum-mounted filter to regulate the amount of emitted light passing into the spectrograph. One hundred percent transmission of emitted light is allowed during the initial 20 seconds of the burn, then continually reduced to 40 percent over the next 32 seconds using the pendulum-mounted filter, and followed by an additional 68 seconds of burn time. The reduction of light transmission during the latter part of the burn decreases spectral background and the line emission of less volatile elements commonly responsible for problem-causing interferences. The sensitivity of the method for some geochemically important trace elements commonly determined in mineral exploration (Ag, As, Au, Be, Bi, Cd, Cr, Cu, Pb, Sb, Sn, and Zn) is improved up to five-fold under ideal conditions without compromising precision or accuracy
This dataset contains a collection of 24 folders, each representing a specific U.S. Geological Survey area of interest (AOI; fig. 1), as well as datasets for AOI subsets. Each folder includes the extent, contours, Digital Elevation Model (DEM), and hydrography of the corresponding AOI, which are organized into feature vector and raster datasets. The dataset comprises a geographic information system (GIS), which is available upon request from the USGS Afghanistan programs Web site (http://afghanistan.cr.usgs.gov/minerals.php), and the maps of the 24 areas of interest of the USGS AOIs.
This chapter describes data used in support of the process being applied by the U.S. Geological Survey (USGS) National Oil and Gas Assessment (NOGA) project. Digital tabular data used in this report and archival data that permit the user to perform further analyses are available elsewhere on this CD–ROM. Computers and software may import the data without transcription from the Portable Document Format files (.pdf files) of the text by the reader. Because of the number and variety of platforms and software available, graphical images are provided as .pdf files and tabular data are provided in a raw form as tab-delimited text files (.tab files).
Within the boundaries of the United States abnormal amounts of uranium have been found in rocks of nearly all geologic ages and lithologic types. Distribution of ore is more restricted. On the Colorado Plateau, the Morrison formation of Jurassic age yields 61.4 percent of the ore produced in the United States, and the Chinle conglomerate and Shinarump formation of Triassic age contribute 26.0 and 5.8 percent, respectively. Clastic, carbonaceous, and carbonate sedimentary rocks of Tertiary, Mesozoic, and Paleozoic ages and veins of Tertiary age are the source of the remaining 6.8 percent.
Systematic mapping of the sedimentary geology of Saudi Arabia by Arabian-American Oil Co. (Aramco) began in 1933. By 1959, exploration parties of one type or another had surveyed more than 1,300,000 square kilometers (500,000 square miles) of sedimentary outcrop. The foundation for sedimentary deposition is the Arabian Shield a vast Precambrian complex of igneous and metamorphic rocks that occupies roughly one-third of the Arabian Peninsula in the west and crops out sporadically along the southern coast. Since the outset of the Paleozoic Era the shield has been amazingly stable, subject only to gentle, epeirogenic movement. On this rigid land mass was deposited an aggregate total of nearly 5,500 meters (18,000 feet) of sedimentary rocks ranging in age from presumed Cambrian to Pliocene(?). Paleozoic, Mesozoic, and lower Tertiary strata are magnificently exposed in central Arabia where they crop out in a great curved belt bordering the shield. Here the landscape is dominated by a series of essentially parallel west-facing escarpments, each supported by a resistant limestone cap. Exposures are unusually good, and many rock units can be traced without significant interruption for 500 to nearly 1,000 km. Beds reflecting buried basement configuration dip gently and uniformly away from the escarpment region into the Persian Gulf and Rub' al Khali basins. East of the escarpment belt is a broad expanse of relatively low-relief terrain in which Tertiary and younger deposits effectively mask older units. Clues to the character of pre-Tertiary rocks in this large area, which includes the Rub' al Khali desert and most of northeastern Arabia, are afforded only by widely scattered bore holes and oil wells. In extreme northwestern Arabia, largely lower Paleozoic sedimentary rocks are exposed, although a basinal area bordering the Paleozoic rocks on the north is characterized by thick Upper Cretaceous to Tertiary strata. Tertiary to Recent volcanic rocks cover substantial parts of the area. In general the older sedimentary rocks are exposed in north-central and northwestern Arabia near the Precambrian basement where as much as 2,000 m of lower Paleozoic rocks are present. Although unfossiliferous, the lower 600 m can be equated, at least in part, to rocks of certain Cambrian age in Jordan. Higher beds contain intervals confidently dated as Lower Ordovician, Silurian, and Lower Devonian. Lower Paleozoic rocks are chiefly coarse-grained sandstone of terrestrial origin, although marine shale occurs at several levels and the upper 300 m is mainly shale with thin beds of limestone. Lower Paleozoic strata are succeeded in the central escarpment region by a thick sequence (about 1,000 m) of Upper Permian and Triassic sedimentary rocks. The initial deposit, the Khuff Formation, is mostly shallow-water limestone; overlying beds are nonmarine elastics except for thick carbonate units in the middle part of the section. Above the Triassic System is some 200 to 500 m of Lower and Middle Jurassic rocks which, near the middle of the escarpment region, are interbedded marine shale and shelf limestone. These grade to sandstone, in part continental, in the northern and southern areas of outcrop. The Middle Jurassic is overlain by a great sequence-of nearly pure carbonate rocks, highly fossiliferous and accurately dated as Upper Jurassic and early Lower Cretaceous. The Jurassic System is spectacularly displayed in central Arabia where it forms the backbone of the escarpment region the Tuwayq Mountains. Carbonate sedimentation was interrupted several times in the closing stages of the Jurassic b^ the onset of evaporite conditions which gave rise to cyclic deposits of anhydrite and calcarenite. The resulting sequence the Arab Formation is of prime importance for its porous carbonate members contain billions of barrels of proved oil reserves The carbonate sequence is succeeded by a thick body of late Lower and Middle Cretaceous sandstone. (The Middle Cretaceous Series and Epoch, as defined by European geologist-, are used in this report.) Late Lower Cretaceous rocks are nonmarine and appear only in the middle and southern parts of the escarpment region. Middle Cretaceous rocks, nonmarine in the south, become progressively more marine in the north where they follow a transgressive path northwest across older beds as far as Jordan. Upper Cretaceous and Eocene rocks, almost exclusively in limestone and dolomite facies, are extensively exposed alorc the eastern edge of the escarpment belt and continue northwest into Iraq. The sequence, with an average thickness of about 5^0 m, includes rocks of Upper Cretaceous, Paleocene, lower Eocene, and middle Eocene ages. The stratigraphic sequence above the Eocene consists of 200 to 600 m of Miocene and Pliocene rocks, mostly of nonmarine origin. These deposits a heterogeneous assemblage of marly sandstone, sandy marl, and sandy limestone blanket the Rub' al Khali and northeastern Arabia. Above the Miocene and Pliocene rocks are unconsolidated Quaternary deposits which comprise great sand deserts and widespread gravel sheets. Sand of the Rub' al Khali Desert alone covers about 600,000 sq km (230,000 sq mi) or most of southern Arabia. Two major structural provinces are recognized within the Arabian Peninsula and adjacent areas. One is the comparatively stable interior region whose rigidity is controlled by the Precambrian basement. The other is the great mobile belt of Taurus, Zagros, and Oman Mountains, bordering the stable region on the north and east. Saudi Arabia falls entirely within the stable region. The interior stable region contains the Arabian shield as well as the Arabian Shelf an extension of the basement thinly veneered with little-disturbed sedimentary rocks. Widespread structural events, presumably related to epeirogenic movement within the basement, have divided the Arabian Shelf into several distinct and significant structural elements the Interior Homocline, the Interior Platform, and several basinal areas. Bordering the shield is a great belt of sedimentary rocks whose dip basinward is so slight and uniform as to be impreceptible to the eye. This Interior Homocline has an average width of about 400 km and a persistent dip varying from slightly more than 1°00' in older units to less than 0°30' in the youngest. One structural feature of the homocline the central Arabian arch has greatly influenced the present surface distribution of sedimentary rocks in the interior escarpment region. The arch, which affects all rocks from the basement up, marks the area of maximum curvature of the homocline in central Arabia. Although the arch has a varied history, it is apparently a residual high between the periodically sinking Persian Gulf and Rub' al Khali basins rather than a true independent positive feature. Support for this concept conies from the presence of a great arc of tensional structures the central Arabian graben and trough system near the crest of the arch and along the hinge line between the Persian Gulf basin and the stable western block. Bordering the homocline is the Interior Platform, a remarkably flat area of varying width in which systematic dip off the crystalline core no longer prevails. Superimposed on the platform are several major north-south anticlinal trends which include the great oil fields of Arabia Adjacent to the platform are several basinal areas that have from time to time received thick sedimentary deposits. Such basinal sags have developed on the shelf in the northeastern Rub' al Khali, northern Persian Gulf, Dibdibah and Sirhan-Turayf areas.
The Upper Jurassic Norphlet Formation is a stratigraphic unit located in the subsurface of the United States Gulf coastal plain and offshore Gulf of America (Gulf of Mexico). The Norphlet consists of clastic sediments derived from the southern Appalachian highlands, and was deposited in a continental dryland setting on the margins of the early Gulf of America rift basin. The formation contains a variety of sedimentary facies, including facies representing updip alluvial fans, wadis, red beds, and a widespread erg, or eolian sand sea. The erg facies form the primary reservoirs from which hydrocarbons sourced from the overlying Smackover Formation are produced. Development of the Norphlet began in earnest in the late 1960s, with new discoveries, including large fields at Flomaton, Hatters Pond, and Mobile Bay, continuing through the 2000s–2010s with the discovery of major oil fields in the offshore Desoto Canyon area. Onshore, Norphlet hydrocarbon traps typically are faulted salt anticlines, although many fields also have a stratigraphic trapping component because of the preservation of dune-scale bedforms. Thermal maturity across the Norphlet play varies significantly with depth, resulting in oil production transitioning downdip to natural gas liquids production, then dry gas production; production depths reach to greater than 21,000 feet. A 2024 U.S. Geological Survey assessment divided the Norphlet into four conventional assessment units defined by the type and frequency of trapping mechanisms, sedimentology, and thermal maturity of each area, with little potential for hydrocarbon development observed west of the Mississippi River. Although petroleum resources in the Norphlet were revised downward, it is probable that significant resources remain to be discovered.
Information was collected on the geologic and hydraulic characteristics of three shale-dominated units in Oklahoma-the Dog Creek Shale and Chickasha Formation in Canadian County, Hennessey Group in Oklahoma County, and the Boggy Formation in Pittsburg County. The purpose of this project was to gain insight into the characteristics controlling fluid flow in shaly units that could be targeted for confinement of hazardous waste in the State and to evaluate methods of measuring hydraulic characteristics of shales. Permeameter results may not indicate in-place small-scale hydraulic characteristics, due to pretest disturbance and deterioration of core samples. The Dog Creek Shale and Chickasha Formation hydraulic conductivities measured by permeameter methods ranged from 2.8 times 10 to the negative 11 to 3.0 times 10 to the negative 7 meter per second in nine samples and specific storage from 3.3 times 10 to the negative 4 to 1.6 times 10 to the negative 3 per meter in four samples. Hennessey Group hydraulic conductivities ranged from 4.0 times 10 to the negative 12 to 4.0 times 10 to the negative 10 meter per second in eight samples. Hydraulic conductivity in the Boggy Formation ranged from 1.7 times 10 to the negative 12 to 1.0 times 10 to the negative 8 meter per second in 17 samples. The hydraulic properties of isolated borehole intervals of average length of 4.5 meters in the Hennessey Group and the Boggy Formation were evaluated by a pressurized slug-test method. Hydraulic conductivities obtained with this method tend to be low because intervals with features that transmitted large volumes of water were not tested. Hennessey Group hydraulic conductivities measured by this method ranged from 3.0 times 10 to the negative 13 to 1.1 times 10 to the negative 9 meter per second; the specific storage values are small and may be unreliable. Boggy Formation hydraulic conductivities ranged from 2.0 times 10 to the negative 13 to 2.7 times 10 to the negative 10 meter per second and specific storage values in these tests also are small and may be unreliable. A substantially higher hydraulic conductivity of 3.0 times 10 to the negative 8 meter per second was measured in one borehole 30 meters deep in the Boggy Formation using an open hole slug-test method.
The purpose of this study was to apply the techniques of computer image processing to ERTS images as an aid to the solution of some regional geologic problems of significant interest. ERTS-1 images were applied to studies in the Shivwits Plateau, Coconino Plateau, and north-central Arizona regions. Unprocessed ERTS images revealed a wealth of new structural information and enabled a broad regional study to be made of the tectonic history of the southwestern Colorado Plateau. Spectral information from ERTS-1 was shown to be compatible with ground spectral reflectance measurements made with a portable field instrument developed during this investigation, provided that allowance was made for atmospheric effects. Computer image processing yielded lithologic boundary information within the Coconino Plateau region not obtainable from unprocessed images. Various enhancement techniques were compared in the three areas of study, and some simple rules were developed to guide the processing of images in unknown areas. A new hypothesis was developed for the history of the Colorado River. An ancestral and relatively old Upper Colorado Drainage followed approximately its present course as far as the western side of the Kaibab Uplift, where it diverged from the present course by following a strike valley trending north-northwest. This drainage was captured relatively recently by a much younger Lower Colorado Drainage, which developed by headward erosion after the opening of the Gulf of California. A byproduct of the regional studies in each of the three areas was the identification of areas favorable for the localization of shallow and deep ground waters. On the Shivwits Plateau water trapped in the axis of the old strike valley underlying the Shivwits lavas is a potential source. On the Coconino Plateau sandstone lenses, underlain by clays, within the otherwise permeable Kaibab Limestone are potential perched aquifers. These can be identified on computer-enhanced images. Lineaments detected first on ERTS-1 frames and later verified on aerial photographs were used south of Flagstaff, Arizona, to identify maximum fracturing along the Oak Creek fault in the Woody Mountain well field; a site for a new deep well has been selected and is being drilled by the city of Flagstaff.
More than 50 percent of the U.S. population currently live within 50 miles of an ocean, Great Lake, or major estuary. According to forecasts, the concentration of people along our coastlines will continue to increase into the 21st century. In addition to residential and commercial buildings and facilities worth tens of billions of dollars, the coasts and associated wetlands are natural resources of tremendous value, with estimates in excess of $13 billion per year for commercial and recreational fisheries alone. Human activities and natural processes are stressing the coastal environment. * Each of the coastal states and island territories is suffering problems related to coastal erosion. * Deterioration of wetlands is widespread and of great public concern. * Pollutants carried by rivers or runoff are discharged directly into coastal waters and accumulate in the sediments on the sea floor, in some areas causing damage to living resources and presenting a threat to public health. * Onshore sources for hard-mineral resources, such as sand and gravel used for construction purposes, are becoming increasingly difficult to find. New sources are being sought in coastal waters. Coastal issues will become even more important into the next century if sea level is significantly influenced by climate change and other factors.
Explore the source record for details and available documents.