SEARCH · USGS Science

Results for “Atmospheric Measurement Techniques”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

470 records · Page 10Linked to original sources

USGS1999

Comparison of two approaches for determining ground-water discharge and pumpage in the lower Arkansas River Basin, Colorado, 1997-98

In March 1994, the Colorado Division of Water Resources (CDWR) adopted “Rules Governing the Measurement of Tributary Ground Water Diversions Located in the Arkansas River Basin” (Office of the State Engineer, 1994); these initial rules were amended in February 1996 (Office of the State Engineer, 1996). The amended rules require users of wells that divert tributary ground water to annually report the water pumped monthly by each well. The rules allow a well owner to report the pumpage measured by a totalizing flowmeter (TFM) or pumpage determined from electrical power data and a power conversion coefficient (PCC) (Hurr and Litke, 1989). Opinions by representatives of the State of Kansas, presented before the Special Master hearing a court case [State of Kansas v. State of Colorado, No. 105 Original (1996)] concerning post-Compact well pumping, stated that the PCC approach does not provide the same level of accuracy and reliability as a TFM when used to determine pumpage. In 1997, the U.S. Geological Survey (USGS), in cooperation with the CDWR, began a 2-year study to compare ground-water pumpage estimates made using the TFM and the PCC approaches. The study area was along the Arkansas River between Pueblo, Colorado, and the Colorado-Kansas State line (fig. 1). The two approaches for estimating ground-water discharge and pumpage were compared for more than 100 wells completed in the alluvial aquifer of the Arkansas River Basin. The TFM approach uses an inline flowmeter to directly measure instantaneous discharge and the total volume of water pumped at a well. The PCC approach uses electrical power consumption records and a power conversion coefficient to estimate the pumpage at ground-water wells. This executive summary describes the results of the comparison of the two approaches. Specifically, (1) the differences in instantaneous discharge measured with three portable flowmeters and measured with an inline TFM are evaluated, and the statistical differences in paired instantaneous discharge between the two approaches are determined; (2) short- and long-term variations in the PCC’s are presented; (3) differences in pumpage between the two approaches are evaluated, and the statistical differences in pumpage between the two approaches are determined; (4) potential sources of discrepancy between pumpage estimates are discussed; and (5) differences in total network pumpage using the two approaches are presented. During the irrigation seasons of 1997 and 1998, instantaneous discharge and electrical power demand were measured at randomly selected wells to determine PCC’s. At more than 100 wells, the PCC’s determined during the 1998 season were applied to total electrical power consumption data that was recorded between the initial and final readings at each network well site in 1998 to estimate total ground-water pumpage. At each site, an inline TFM was installed in a full-flowing, acceptable test section of pipe on the discharge side of the pump where the measurement of discharge was made. Measurements of instantaneous ground-water discharge also were made using three different types of portable flowmeters. The average velocity multiplied by the cross-sectional area of the discharge pipe was used to compute the discharge in gallons per minute. Whenever possible, discharge measurements were made at each network site using all three types of portable flowmeters.

Colorado↗

USGS2025

Geochemical processes related to mined, milled, or natural metal deposits in a rapidly changing global environment

The demand for metals and raw materials, such as nickel and copper, has been projected to expand in the coming decades, driven by the global energy transition, the need for green technologies, and expanding infrastructure. Consequently, the increasing extraction and production of mining waste can have adverse impacts on surrounding environments and human health. The aim of this thematic collection is to fill critical knowledge gaps in the present-day cycles of metal(loid)s from source to larger sinks, and the effect of environmental management, anthropogenic development, and climate change. Altogether, the studies have been conducted in different natural settings around the world and comprise investigations in laterites, a soil-medicinal plant system, watersheds, and banded iron formations, among others. The geochemical applications in tracing mineralization, its secondary products, and/or potential impact on the immediate environment are highly diverse with applied tools ranging from isotope tracers to major and trace element systematics. Particularly the use of rare earth elements, their patterns and anomalies are methods employed by several studies in this collection. We summarize the findings to offer a potential future direction for the use of geochemical tracing techniques in resource exploration in the context of climate change and environmental challenges.

Geochemistry: Exploration, Environment, Analysis↗

USGS2025

Metal-rich lacustrine sediments from legacy mining perpetuate copper exposure to aquatic-riparian food webs

Historic copper mining left a legacy of metal-rich tailings resulting in ecological impacts along and within Torch Lake, an area of concern in the Keweenaw Peninsula, Michigan, USA. Given the toxicity of copper to invertebrates, this study assessed the influence of this legacy on present day nearshore aquatic and terrestrial ecosystems. We measured the metal (Co, Cu, Ni, Zn, Cd) and metalloid (As) concentrations in sediment, pore water, surface water, larval and adult insects, and two riparian spider taxa collected from Torch Lake and a nearby reference lake. Overall, elevated metal and metalloid concentrations, particularly Cu, were measured in all sediment samples and some surface and pore water samples collected from Torch Lake. For instance, Cu concentrations in the Torch Lake sediment were ∼200% higher than the reference lake and all measured concentrations exceeded predicted effects concentrations by at least ninefold. Within larval insect tissues, we observed 160% higher Cu concentrations than measured in the reference lake, and Cu was the only measured element above predicted effects concentrations in Torch Lake. Adult insects collected at both lakes had similar metal concentrations irrespective of exposure levels. Yet we found 100% higher copper concentrations in Torch Lake riparian spiders, demonstrating elevated exposure risk to insectivores across the aquatic-terrestrial boundary. Our results highlight that other metals in the mixture may not be as concerning to adjacent riparian ecosystems, but copper remains a contaminant of concern in Torch Lake 60 years after mining ceased.

Michigan↗

USGS2025

Benthic habitat map of Olowalu Reef, Maui, Hawaii—Geomorphological structure, biological cover, and geologic zonation determined with spectral, lidar, and acoustic data

The fringing coral reef off Olowalu, Maui, Hawaii, has been identified as a local conservation priority site. In 2007, the National Oceanic and Atmospheric Administration (NOAA) produced a benthic habitat map of the Hawaiian Islands that was used as a foundation for this study. To support place-based management of the reef in the future, the U.S. Geological Survey (USGS) mapped the geologic zone, major and dominant geomorphological structure, biological cover type, and percent of biological cover for 11 square kilometers (km 2 ) of Olowalu Reef at a minimum mapping unit (MMU) of 100 square meters (m 2 ) to create a benthic habitat map. Heads-up digitization was employed on 0.50-meter (m) natural color satellite orthoimagery with ancillary 1-m acoustic backscatter imagery from single-scan sonar (sound navigation and ranging). A 1-m, 4-m, and 8-m digital bathymetric model (DBM) was interpolated from bathymetric lidar (light detection and ranging), and various geomorphometric layers derived from the DBMs were used for habitat interpretation. Still-frame imagery of the seafloor extracted from vessel-towed underwater video transects on Olowalu Reef served as ground validation points ( n =870) during active mapping and accuracy assessment points ( n =216) for thematic accuracy assessment. Thematic accuracy was cross-validated by the Hawai‘i Department of Land and Natural Resources Division of Aquatic Resources. Final thematic accuracy was 88.8 percent for major structure, 85.6 percent for dominant structure, 86.0 percent for major biological cover, and 78.6 percent for type and percent of major biological cover. Reef and hardbottom constituted 52 percent of the total mapped habitat, comprising mostly aggregate reef (31 percent) and pavement (11 percent), with large swaths of spur-and-groove (9 percent). Of this hardbottom, 17 percent was covered with moderate (10 to <50 percent) coral and 27 percent with high coral cover (50 to <90 percent). High (50 to <90 percent) macroalgae cover dominated the continuous sand sheets in offshore bank/shelf zones. The map created in this study supplements the NOAA 2007 map and expands on the observations made by USGS sampling of the reef. The NOAA 2007 map and our map differed in total areal extent by a negligible 6 m 2 and were in general thematic agreement. Our map is intended to serve as a baseline for public access, general research, local-level management, and reef change for future studies.

Hawaii↗

USGS2025

Drone-based radiometric surveys provide high-resolution mine waste characterization

Airborne radiometric surveys use passive geophysical techniques to characterize geochemical variations at or near earth’s surface. These methods have been used for a variety of mapping applications, including mineral resource evaluation. However, detailed characterization of smaller geologic targets, including mine waste features, requires flying at lower altitudes and with tighter line spacing than is feasible with traditional aircraft. Here, a small uncrewed aircraft system (sUAS) equipped with a radiometric sensor was used to acquire high-resolution gamma-spectrometry over small mine waste features and a low-grade stockpile in southwestern New Mexico. The sUAS radiometric system mapped local variability within each survey area and revealed ~2–10 m wide zones where radioelements K, Th, and U may be elevated 2–10× the surrounding material. Additionally, the sUAS radiometric data revealed radioelement variability across survey sites, which correlated reasonably well with variability seen in geochemical samples at each survey site, even though samples collected from individual sites showed high local variability. The sUAS data characterized local heterogeneity within mine waste and other small geologic targets at scales of a few meters to tens of meters, which is not possible with traditional crewed aircraft, and with continuity of coverage that is not possible with ground surveys, thus filling a key gap in geophysical survey spatial resolution.

New Mexico↗

USGS1990

Large springs in the Valley and Ridge Province in Tennessee

Approximately 2,700 miscellaneous discharge measurements for 171 large springs in 28 counties of East Tennessee, predominantly within the Valley and Ridge physiographic province, were analyzed statistically and results tabulated to summarize data useful to the Appalachian Valleys-Piedmont Regional Aquifer System Analysis study. The number of measurements at each spring ranged from 1 to 65. Information from each spring includes station numbers, latitude, longitude, spring name and where data are sufficient, an estimate of the mean discharge and the discharge exceeded by 75%, 50%, and 25% of the miscellaneous measurements. Data are referenced to locations on a 1:1,000 ,000-scale map. The highest mean spring discharge was 32.2 cu ft/sec (14,5000 gallons/min).

Tennessee↗

USGS2026

Remote sensing enables basin-scale inventories of coal mine methane

Underground coal mines are important global sources of methane, but emission estimates are uncertain. We show that emission estimates for individual mines from aircraft remote-sensing surveys in the United States agree within 40% with direct measurements used for national emission reporting (IPCC Tier 3 estimate). Such direct measurements are unavailable in most countries, which rely on estimated emission factors (EFs) applied to coal-production rates. We find that EFs from IPCC Tier 1 and the Model for Calculating Coal Mine Methane (MC2M) methods overestimate U.S. emissions 3-fold due to incorrect dependence on mine depth. An IPCC Tier 2 method using measured basin-specific mine gas content agrees with direct emission measurements but does not account for gob well emissions and requires gas content data that are generally unavailable. We show that aircraft remote sensing for a small sample of mines can successfully estimate basin-specific EFs for ventilation shafts and gob wells, enabling estimates of basin- and national-scale emissions. We discuss how the method can be applied with satellite remote sensing to quantify coal emissions worldwide.

Alabama, Colorado, Kentucky, New Mexico, Ohio, Pen↗

USGS2025

Grand Canyon landslide-dam and paleolake triggered by the Meteor Crater impact at 56 ka

This paper hypothesizes that the Meteor Crater impact in Arizona, USA, 56,000 years ago triggered landslides in Grand Canyon that dammed the Colorado River and formed Nankoweap paleolake. This is compatible with shock and earthquake physics for the impact that infer a M5.4 seismic event, attenuated to an effective magnitude of M3.5 at Grand Canyon. Results that support the hypothesis include radiocarbon dating of driftwood and luminescence dating of associated slack-water lake sediments that are preserved in caves up to 60 m above the modern Colorado River. Radiocarbon ages from two locations, including Stanton’s Cave, date the driftwood as 55.25 ± 2.44 ka (n = 4). Sediments associated with the driftwood gave a luminescence age of 56.00 ± 6.39 ka (n = 2). These six Grand Canyon dates, and three published ages for the Meteor Crater impact, show statistically indistinguishable results that support the hypothesis for a geologically instantaneous series of events with a mean age of 55.60 ± 1.30 ka. This work highlights the value of radiocarbon dating near the limits of the technique, integration of multiple dating methods, and seismic and landslide hazards associated with meteorite impacts in regions of extreme topography like Grand Canyon.

Arizona↗

USGS2025

S/P amplitude ratios with Distributed Acoustic Sensing and application to earthquake focal mechanisms

Distributed acoustic sensing (DAS), which transforms a fiber optic cable into an array of high frequency strainmeters, has the potential to help us characterize earthquakes with a dense sampling of measurements. While earthquake focal mechanisms are frequently determined using P -wave polarities and S / P amplitude ratios with inertial seismometers, the dense sampling of DAS over potentially large portions of the focal sphere can aid our solutions. Here, we consider ∼200 regional earthquakes and thousands of S / P measurements on a DAS cable colocated with a network of inertial seismometers near Arcata, California. We demonstrate the S / P ratio measurements made on DAS are similar to those made on the inertial seismometers and can be used to constrain focal mechanism solutions.

California↗

USGS2025

Review and synthesis of the applications of machine learning to coalbed methane recovery

Over the last 30 years, a substantial literature has evolved on the use of machine learning (ML) to assess, predict, and improve the efficiency of coalbed methane (CBM) recovery. In the United States, the production of CBM declined as shale gas production matured, but CBM continues to be an important energy resource in other parts of the world. ML applications that have the potential to improve CBM reservoir management and production forecasts, and to increase exploration and operational efficiency, are still of significant interest. The integration of geostatistical techniques into the CBM ML applications has been largely absent but represents an opportunity for improvement. The literature demonstrates the widespread interest in, and applicability of, ML algorithms applied to CBM problems, and that they continue to result in improvements in predictive performance. However, (1) much of the research is more academic than operational, (2) many results are based on simulations, or small or proprietary datasets, (3) ML performance information can be inconsistent and sometimes entirely omitted, (4) most methodologies are unique to the specific CBM situation and likely not generalizable, (5) no standard data repositories are available to directly compare the performance of competing algorithms, and (6) the spatial component is often omitted. Finally, relatively new ML protocols involving causality analysis and reinforced learning, as well as hybrid workflows combining both supervised and unsupervised learning, are anticipated to dominate the future investigations. Integration of geostatistical and geospatial analysis with ML should enhance performance.

Book chapter↗

USGS2025

Constraining large magnitude event source and path effects using ground motion simulations

The purpose of this study is to use ground motion simulations to investigate ways in which source and path effects for large magnitude events can be represented in non-ergodic GMMs. While we initially developed computation techniques using CyberShake simulations, the range of magnitudes and source-site combinations is not adequate to replicate what is observed empirically. We therefore designed a new ground motion simulation study, which includes earthquakes with a large range of magnitudes distributed uniformly on a fault plane, and sites covering a large range of rupture distances and azimuths. After running a large suite of simulations (M4-M7), we then develop a non-ergodic GMM with the simulation data. We find that the within-site residuals are dominated by the radiation pattern, rupture directivity, and slip patterns. Next, we modify an existing rupture directivity model to fit and remove the observed radiation pattern and rupture directivity from the residuals. We also minimize the contributions of slip patterns by averaging the within-site residuals among multiple source realizations. Finally, after removing the source effects from the within-site residuals, we compare the path effects computed with different magnitude groups using two approaches. The first approach only considers the small events that have the same shortest path to a site with the large events, while the second approach considers all small events on the fault plane. The results indicate that the path effects of large events cannot be satisfactorily approximated with that of small events using either approach.

Conference Paper↗

USGS2025

Geochemistry of quartz and fluid inclusions associated with gold, tungsten, and antimony in the Stibnite-Yellow Pine district, Idaho

Deposits in the historic Stibnite-Yellow Pine district in east-central Idaho were mined for Ag, Au, Hg, Sb, and W. Ore is hosted in breccia and fault zones along NE-striking faults that transect the Atlanta lobe of the Late Cretaceous Idaho batholith and metamorphosed Neoproterozoic to lower Paleozoic rocks. Geochronological studies have delineated five superimposed and zoned hydrothermal events in the mining district which range in age from Late Cretaceous to the Eocene. They formed the following consecutive assemblages: (1) vein and disseminated pre-ore milky quartz (± calcite), muscovite, and brassy pyrite with minor molybdenite and base metal sulfides; (2) vein and disseminated quartz, calcite, sericite, auriferous-pyrite, and arsenopyrite; (3) potassium feldspar, quartz, dolomite, and calcite with vein and disseminated scheelite ± pyrite and arsenopyrite; (4) Au-Ag veins that contain adularia; and (5) breccia, vein, and disseminated quartz, calcite, and stibnite with minor Ag sulfosalts and distal zones of cinnabar and realgar at Fern and Hermes mines. In this study, the pressure, temperature, and composition of ore-forming fluids were measured in Au-, W-, and Sb-bearing samples collected from drill core and surface exposures. Using optical petrography, scanning electron microscopy cathodoluminescence (SEM-CL) and electron microprobe cathodoluminescence (EMPA-CL) imaging, as well as electron microprobe (EMP) and laser ablation-inductively coupled plasma-mass spectrometry trace element analyses, four major overprinting generations of hydrothermal quartz are defined. Fluid inclusion assemblages (FIAs) in each generation of quartz were characterized by microthermometry and laser Raman spectroscopy. Quartz and fluid inclusion paragenesis are as follows: (Qi) altered and overprinted Qi with no coeval FIAs that formed before or during event 1; (Q1) early veins as well as disseminated quartz with dull gray SEM-CL and H 2 O-NaCl-CO 2 FIAs that formed at minimum temperatures and pressures of 281° to 358°C and 1346 to 1789 bar during event 2 (Au); (Q2) vein and disseminated quartz, often euhedral, with H 2 O-NaCl ± CO 2 ± CH 4 FIAs that formed at minimum temperatures and pressures of 183° to 213°C and 72 to 602 bar during event 3 (W); and (Q3) euhedral and disseminated quartz with H 2 O-NaCl FIAs that formed at minimum temperature and pressures of 156° to 161°C and 5 to 6 bar during event 5 (Sb). Stibnite hosts H 2 O-NaCl FIAs trapped at minimum temperatures and pressures of 150° to 189°C and 5 to 12 bar that are similar to those of Q3-hosted FIAs. The quartz paragenetic history in the district follows a progressive temporal path from Tienriched quartz deposited by a relatively deep and higher temperature aqueous-carbonic fluid to a Li, Al, and Sb enriched quartz precipitated from a lower temperature aqueous fluid. Gases in fluid inclusion extracts from ore and gangue minerals were analyzed by mass spectrometry. Noble gas isotope analysis of fluid inclusion extracts revealed three signatures. Pre-ore Qi has R/R A (the isotopic ratio of the sample 3 He/ 4 He to atmospheric 3 He/ 4 He (1.384 × 10 −6 )) values that reflect the composition of the crustal melt-derived Atlanta lobe of the Idaho batholith. Quartz (Q1) and auriferous arsenian pyrite of hydrothermal event 2 have 20 Ne/ 4 He and R/R A values that plot along the air-crust mixing line, and these gases were likely introduced by metamorphic fluids derived from metasedimentary rocks. Stibnite with associated quartz (Q3 ± Q2) have 20 Ne/ 4 He and R/R A values that extend from the air-crust mixing line to the air-mantle mixing line, showing a shift from a crustal signature to an overprinting mantle signature. Late calcite has 20 Ne/ 4 He and R/R A values that extend from air toward the mantle end member, which suggests that magmatic volatiles condensed into meteoric groundwater late in the paragenesis. A mantle volatile source is also supported by high 20 Ne/ 22 Ne ratios. The Stibnite-Yellow Pine district is similar to other Au-W-Sb districts around the world in ore fluid chemistries, with late-stage stibnite being a product of cooling. The fluid pressure-temperature-composition (P-T-X) estimates and the crustal source of He during hydrothermal event 2 gold mineralization are characteristic of orogenic Au deposits, and the observed inclusion reequilibration textures indicate that trapped fluid inclusions were deformed during transitions between the brittle-ductile environment. Scheelite was deposited during event 3 with Q2 quartz and is overgrown by Q3 quartz and stibnite. Our interpretation of the quartz texture, chemistry, and fluid inclusion P-T-X data suggest that Au, W, and Sb mineralization occurred as hydrothermal fluids evolved from H 2 O-NaCl-CO 2 at >300°C and depths of ~4 to 6 km near the ductile to brittle transition to H 2 O-NaCl at ~150°C and epithermal depths as the Idaho batholith was exhumed. Geochronology indicates that from the Late Cretaceous to early Eocene, overprinting hydrothermal events formed deep orogenic Au, intermediate W, and shallow epithermal Au-Ag and Sb. Without comprehensive geochronologic constraints, our fluid inclusion data and textural observations could be interpreted as a single evolving hydrothermal system, as has been done in many other mining districts with similar mineralization.

Idaho↗

USGS1976

Non-radiometric borehole geophysical detection of geochemical halos surrounding sedimentary uranium deposits

Roll-type uranium deposits are formed by the concentration of uranium by ground water in geochemical cells. Non-uranium minerals having different solubilities may be deposited ahead of or behind the uranium minerals, forming halos that surround the ore. In addition, oxidizing and reducing environmental conditions may cause zones of mineral alteration to develop beyond the limits of the uranium deposit. Certain physical property anomalies that are commonly associated with halos can be detected by relatively fast and inexpensive borehole geophysical measurements made either in individual holes, or between two adjacent holes. Borehole measurements that have been found to be useful include electrical resistivity, induced polarization, and magnetic susceptibility. Electrical resistivity is increased by the presence of calcite and other cementing minerals that sometimes create permeability barriers in the neighborhood of uranium deposits. Induced polarization (IP) response is increased by sulfide and clay minerals that are commonly found in anomalous concentrations near roll-type deposits. Magnetic susceptibility is usually decreased by the oxidation of magnetite to hematite or limonite in the zone of chemical alteration that is left as a trail behind roll fronts. Borehole measurements of electrical resistivity, induced polarization and magnetic susceptibility were made in the vicinity of a uranium roll-type deposit in south Texas. Results indicate that mineral halos can be detected by borehole measurements made. in wide-spaced drill holes, and that the total amount of drilling needed to find a deposit can be reduced substantially by this exploration approach.

Open-File Report↗

USGS2025

Permafrost–wildfire interactions: active layer thickness estimates for paired burned and unburned sites in northern high latitudes

As the northern high-latitude permafrost zone experiences accelerated warming, permafrost has become vulnerable to widespread thaw. Simultaneously, wildfire activity across northern boreal forest and Arctic/subarctic tundra regions impacts permafrost stability through the combustion of insulating organic matter, vegetation, and post-fire changes in albedo. Efforts to synthesis the impacts of wildfire on permafrost are limited and are typically reliant on antecedent pre-fire conditions. To address this, we created the FireALT dataset by soliciting data contributions that included thaw depth measurements, site conditions, and fire event details with paired measurements at environmentally comparable burned and unburned sites. The solicitation resulted in 52 466 thaw depth measurements from 18 contributors across North America and Russia. Because thaw depths were taken at various times throughout the thawing season, we also estimated end-of-season active layer thickness (ALT) for each measurement using a modified version of the Stefan equation. Here, we describe our methods for collecting and quality-checking the data, estimating ALT, the data structure, strengths and limitations, and future research opportunities. The final dataset includes 48 669 ALT estimates with 32 attributes across 9446 plots and 157 burned–unburned pairs spanning Canada, Russia, and the United States. The data span fire events from 1900 to 2022 with measurements collected from 2001 to 2023. The time since fire ranges from 0 to 114 years. The FireALT dataset addresses a key challenge: the ability to assess impacts of wildfire on ALT when measurements are taken at various times throughout the thaw season depending on the time of field campaigns (typically June through August) by estimating ALT at the end-of-season maximum. This dataset can be used to address understudied research areas, particularly algorithm development, calibration, and validation for evolving process-based models as well as extrapolating across space and time, which could elucidate permafrost–wildfire interactions under accelerated warming across the high-northern-latitude permafrost zone. The FireALT dataset is available through the Arctic Data Center ( https://doi.org/10.18739/A2RN3092P , Talucci et al., 2024).

Arctic↗

USGS2025

Understanding market sensitivity: Estimation of supply and demand elasticities for non-fuel minerals

In today’s rapidly changing economic landscape, understanding market responsiveness to price changes and the factors influencing commodity prices has become increasingly relevant. Price elasticities serve as indicators of how variations in market conditions affect supply and demand, providing insights into the sensitivity of commodity markets to price fluctuations. This paper presents a comprehensive analysis of price elasticities of supply and demand for 74 non-fuel mineral commodities including precious metals, base metals, minor metals, and industrial minerals that are utilized across various industries. We employ various econometric techniques, including fixed effects models for panel data and two-stage dynamic ordinary least squares (2S-DOLS) alongside autoregressive distributed lag (ARDL) models for time series analysis, to derive robust estimates of price elasticities. Our findings reveal variability in elasticities among different commodities and indicate that all studied mineral commodities exhibit price inelastic supply and demand in the short run, which we define as one year for the purposes of our analysis, given that the data is all annual. This research provides original estimates of price responsiveness for a wide range of commodities that have not been previously addressed in the literature, thereby enhancing the understanding of market dynamics in the mineral sector. Given that price elasticities can be influenced by factors such as market structure, technological advancements, mining costs, and industry-specific demand drivers, we use variables that serve as proxies for these factors.

Mineral Economics↗

USGS2026

Alternative approaches to dryland reclamation enhance vegetation cover and soil stability at a former uranium mine

Introduction Conventional reclamation methods to recover dryland ecosystems after mineral extraction often have low success. Alternative reclamation techniques may help overcome the many challenges to establishing persistent native vegetation and stable soils. Objectives Compare conventional reclamation approaches that focus primarily on soil stabilization to alternative approaches that may improve native ecosystem restoration at the Kanab North Mine in northern Arizona. Methods In a fully crossed experiment, conventional seed mix (native and non-native species) and seeding methods (drill-seeding) were compared to alternative practices, including a native-only seed mix, connectivity modifiers (ConMods) with hand seeding, and a biocrust inoculation. Restoration metrics like plant establishment, species composition, soil surface cover and stability, biocrust establishment, and near-surface wind-driven sediment were monitored over the first 5 years post-reclamation. Results While all restoration metrics improved with time, compared to traditional methods, ConMods increased total, graminoid, and native plant species cover, and the native-only seed mix increased woody, native, and perennial species cover. Biocrust inoculation increased late-successional biocrust development, but biocrusts only persisted over 5 years in combination with ConMods. Soil stability increased in all treatments, but both ConMods and biocrust inoculation increased stability compared to traditional practices. Conclusion Overall, alternative approaches to reclamation tested here (ConMods, native seed, and biocrust inoculation) were more effective than traditional practices at increasing total plant cover, facilitating biocrust establishment, and promoting soil stability after uranium mine reclamation.

Arizona↗

USGS2024

The EnMAP spaceborne imaging spectroscopy mission: Initial scientific results two years after launch

Imaging spectroscopy has been a recognized and established remote sensing technology since the 1980s, mainly using airborne and field-based platforms to identify and quantify key bio- and geo-chemical surface and atmospheric compounds, based on characteristic spectral reflectance features in the visible-near infrared (VNIR) and short-wave infrared (SWIR). Spaceborne missions, a leap in technology, were sparse, starting with the CHRIS/PROBA and EO1/Hyperion missions in the early 2000s, and providing spectroscopy data with limited spectral coverage and/or low data quality in the SWIR. Since 2019, several countries and agencies have successfully launched a number of spaceborne imaging spectroscopy systems into orbit or deployed them on the International Space Station (ISS) such as DESIS, PRISMA, HISUI, GF-5, EnMAP and EMIT. Among these recent missions, the German Environmental Mapping and Analysis Program (EnMAP) stands for its long-term development, sophisticated design with on-board calibration, high data quality requirements, and extensive accompanying science program. EnMAP was launched in April 2022 and, following a successful commissioning phase, started its operational activities in November 2022. The EnMAP mission encompasses global coverage from 80° N to 80° S through on-demand data acquisitions. Data are free and open access with 30 m spatial resolution, a high spectral resolution with a spectral sampling distance of 6.5 nm and 10 nm in the VNIR and SWIR regions respectively, and a high signal-to-noise ratio. In this paper, we aim to present the mission's current status, coverage, science capabilities and performance two years after launch. We show the potential of EnMAP for space-based imaging spectroscopy to operate in various environments, including high and low light levels, dense forests, Antarctic glaciers, and arid agricultural areas. EnMAP enables various applications in fields such as agriculture and forestry, soil compositional, raw materials, and methane mapping, as well as water quality assessment, and snow and ice properties. The results show that EnMAP's performance exceeds the mission requirements, and highlights the significant potential for contribution to scientific exploitation in various geo- and biochemical sciences. EnMAP is also expected to serve as a key tool for the development and testing of data processing algorithms for upcoming global operational missions.

Remote Sensing of Environment↗

USGS2025

Using peak geometry and shifts in the x-ray spectrum of carbon from electron probe microanalysis to determine thermal maturity of organic matter

During the burial of mudstones, the associated organic matter undergoes gradual thermal maturation, a key process that can influence the reactivity of organic matter during catagenesis, the formation of hydrocarbon deposits and the chemical weathering of mudstones. Conventional methods for assessing the thermal maturity of organic matter often fail to reflect the geochemical heterogeneity between individual organic phases in mudstone samples. Here, we report an alternative, non-destructive, surficial and micro-scale (analytical spot size of ~ 300 nm with about 4 μm diffusion depth for micrometre-size organic grains) method to evaluate the thermal maturity of organic matter in mudstones using the carbon K α X-ray spectrum measured by field emission-electron probe microanalyser (FE-EPMA). Using this method, we observed correlations between parameter values derived from FE-EPMA spectra, including the peak position, the peak area and the intra-sample heterogeneity of these measurements, and independently measured vitrinite/solid bitumen reflectance for a suite of mudstones, representing different age, geological context and burial depth. With the increased values in peak area and position, we identified an increase in the carbon mass fraction of organic matter and the mean nominal oxidation state of carbon approaching zero. These trends, which are consistent with aromatisation and graphitisation, provide the rationale for using FE-EPMA to estimate the thermal maturity of organic matter. To explore some of these trends in more detail, we employed time-of-flight secondary ionisation mass spectrometry, X-ray photoelectron spectroscopy and optical reflectance measurements on a subset of samples.

Geostandards and Geoanalytical Research↗