USGS ScienceSearch

USGS · wsp639

Geology and Ground-Water Resources of the Roswell Artesian Basin, New Mexico

Abstract

The Roswell artesian basin is in the Pecos Valley in southeastern New Mexico. The investigation, which covered a period of three years, 1925 to 1928, was made for the purpose of determining the available supply of artesian and other ground water within the area. The geologic formations of the region are of the Carboniferous (Permian series) and Quaternary systems. The Permian rocks consist of three units-an upper unit composed chiefly of clay, shale, and sand; a middle unit composed chiefly of limestone; and a lower unit composed chiefly of red beds, gypsum, and anhydrite. Most of the artesian water is obtained from the limestone beds of the middle unit, which has been designated the Picacho limestone. Originally the area of artesian flow comprised 663 square miles; but largely on account of heavy draft upon the artesian reservoir, it decreased to 499 square miles in 1916 and to 425 square miles in 1925. The area irrigated by water derived directly or indirectly from the reservoir amounts to about 60,000 acres. The annual quantity of water derived from wells is about 200,000 acre-feet, and the total discharge at the surface from all sources is about 250,000 acre-feet. Recharge to the reservoir is derived from precipitation that falls on a catchment area of 4,000 square miles west of the artesian area. In 1927 a law was passed by the State of New Mexico declaring underground waters to be public waters and subject to appropriation. This law was declared invalid because of a technicality, and in 1931 a new law was enacted, which furnishes a definite basis for the future regulation of ground waters in the area. The investigation leads to the conclusion that no new land should be placed under irrigation with artesian water, but that the development of shallow ground water should be encouraged. The present decline of the artesian head is slight in comparison with that in earlier years, and there is ample evidence to show that the reservoir annually receives large quantities of recharge and that with proper conservation it will never be completely exhausted.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 31° to 37° latitude; -109° to -103° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Albert George Fiedler, Selden Spencer Nye. 1933. Geology and Ground-Water Resources of the Roswell Artesian Basin, New Mexico. https://doi.org/10.3133/wsp639

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Basic ground-water hydrology

Ground water is one of the Nation's most valuable natural resources. It is the source of about 40 percent of the water used for all purposes exclusive of hydropower generation and electric powerplant cooling. Surprisingly, for a resource that is so widely used and so important to the health and to the economy of the country, the occurrence of ground water is not only poorly understood but is also, in fact, the subject of many widespread misconceptions. Common misconceptions include the belief that ground water occurs in underground rivers resembling surface streams whose presence can be detected by certain individuals. These misconceptions and others have hampered the development and conservation of ground water and have adversely affected the protection of its quality. In order for the Nation to receive maximum benefit from its ground-water resource, it is essential that everyone, from the rural homeowner to managers of industrial and municipal water supplies to heads of Federal and State water-regulatory agencies, become more knowledgeable about the occurrence, development, and protection of ground water. This report has been prepared to help meet the needs of these groups, as well as the needs of hydrologists, well drillers, and others engaged in the study and development of ground-water supplies. It consists of 45 sections on the basic elements of ground-water hydrology, arranged in order from the most basic aspects of the subject through a discussion of the methods used to determine the yield of aquifers to a discussion of common problems encountered in the operation of ground-water supplies. Each section consists of a brief text and one or more drawings or maps that illustrate the main points covered in the text. Because the text is, in effect, an expanded discussion of the illustrations, most of the illustrations are not captioned. However, where more than one drawing is included in a section, each drawing is assigned a number, given in parentheses, and these numbers are inserted at places in the text where the reader should refer to the drawing. In accordance with U.S. Geological Survey policy to encourage the use of metric units, these units are used in most sections. In the sections dealing with the analysis of aquifer (pumping) test data, equations are given in both consistent units and in the inconsistent inch-pound units still in relatively common use among ground-water hydrologists and well drillers. As an aid to those who are not familiar with metric units and with the conversion of ground-water hydraulic units from inch-pound units to metric units, conversion tables are given on the inside back cover. Definitions of ground-water terms are given where the terms are first introduced. Because some of these terms will be new to many readers, abbreviated definitions are also given on the inside front cover for convenient reference by those who wish to review the definitions from time to time as they read the text. Finally, for those who need to review some of the simple mathematical operations that are used in ground-water hydrology, a section on numbers, equations, and conversions is included at the end of the text.

Water Supply Paper

Validation of a numerical modeling method for simulating rainfall-runoff relations for headwater basins in western King and Snohomish Counties, Washington

The validity of a previously determined numerical modeling method was assessed. Numerical models for 11 drainage basins were constructed with the Hydrologic Simulation Program-FORTRAN (HSPF) with parameter values that were generalized for the physiographic region. Large and recurrent simulation errors were initially identified, but three systematic modifications of the models corrected those errors for 10 out of the 11 basins. The validity of the numerical modeling method for simulating rainfall-runoff relations in the study area, as modified during this investigation, was not rejected, but observed streamflow data were needed to apply the method.

Water Supply Paper

Sediment-quality assessment of Franklin D. Roosevelt Lake and the upstream reach of the Columbia River, Washington, 1992

Elevated concentrations of trace elements were found in bed sediment of Lake Roosevelt and the Columbia River, its principal source of inflow. Trace-element concentrations in whole water samples did not exceed criteria for freshwater organisms. Bed sediments of Lake Roosevelt were analyzed for organic compounds associated with wood-pulp waste. Dioxins and furans were found in suspended sediment and water of the Columbia River. Abundance and diversity of benthic invertebrate communities were analyzed.

Water Supply Paper