USGS Science⌕ Search

USGS · wsp1999F

Prospects for developing stock - Water supplies from wells in northeastern Garfield County, Montana

Abstract

Ground-water resources in northeastern Garfield County, Mont., afford a practical and reliable source of stock water on the intermingled public and private grazing lands that together comprise an area of about 1,200 square miles. The oldest formation exposed in the area is the relatively thick and impermeable Bearpaw Shale of Cretaceous .age. Overlying the Bearpaw Shale in succession are the Fox Hills Sandstone and Hell Creek Formation of Cretaceous age, the Fort Union Formation of Tertiary age, and thin glacial deposits .and alluvium of Quaternary age. All but the Bearpaw Shale and the glacial deposits are potential aquifers. Published geologic maps were found to be satisfactory after fitting contacts to the topographic base. Mapping, therefore, was limited mainly to outlining on aerial photographs the alluvial deposits in the stream valleys. The major structural feature is the Blood Creek syncline, the axis of which plunges eastward 10-15 feet per mile across the southern part of the area. Beds generally dip 15-25 feet per mile toward the synclinal axis. Water in bedrock aquifers is under artesian pressure, .and most wells in Big and Little Dry Creek valleys flow at the land surface. The only bedrock aquifer having appreciable areal extent is a sandstone 30-70 feet thick that has been mapped by previous investigators as the upper part of the Fox Hills Sandstone. This aquifer crops out in the northern and northwestern parts of the area and dips about 20 feet per mile southeastward beneath younger beds. Most wells in the northern half of the area obtain water from this sandstone at drilling depths of less than 200 feet. The depth to the Fox Hills Sandstone increases progressively southward, and most wells south of Woody Creek obtain water from irregularly distributed sandstone beds and lenses in the overlying Hell Creek and Fort Union Formations. The depth at which water may be obtained from these beds is not accurately predictable, but the depth seldom exceeds 300 feet. The results of the investigation indicate that the prospects for obtaining ample water for livestock from wells drilled into the bedrock formations are very favorable in most of the area. The average depth of bedrock wells in the area is 195 feet. Underflow in the alluvial deposits along all the larger stream valleys also affords a practical source of stock water. Chemical analyses of samples collected at 43 wells and three springs show the water quality to be generally poor. Water from bedrock aquifer contains 530-5,340 milligrams per liter total dissolved solids, whereas water from alluvium contains less than 1,500 milligrams per liter total dissolved solids. The predominant constituents are sodium, bicarbonate, and sulfate. So far as could be determined, all water supplies in the area are suitable for livestock.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 47.151° to 47.941° latitude; -107.012° to -106.17° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

M. C. Van Lewen, Norman Julius King. 1971. Prospects for developing stock - Water supplies from wells in northeastern Garfield County, Montana. https://doi.org/10.3133/wsp1999f

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Basic ground-water hydrology

Ground water is one of the Nation's most valuable natural resources. It is the source of about 40 percent of the water used for all purposes exclusive of hydropower generation and electric powerplant cooling. Surprisingly, for a resource that is so widely used and so important to the health and to the economy of the country, the occurrence of ground water is not only poorly understood but is also, in fact, the subject of many widespread misconceptions. Common misconceptions include the belief that ground water occurs in underground rivers resembling surface streams whose presence can be detected by certain individuals. These misconceptions and others have hampered the development and conservation of ground water and have adversely affected the protection of its quality. In order for the Nation to receive maximum benefit from its ground-water resource, it is essential that everyone, from the rural homeowner to managers of industrial and municipal water supplies to heads of Federal and State water-regulatory agencies, become more knowledgeable about the occurrence, development, and protection of ground water. This report has been prepared to help meet the needs of these groups, as well as the needs of hydrologists, well drillers, and others engaged in the study and development of ground-water supplies. It consists of 45 sections on the basic elements of ground-water hydrology, arranged in order from the most basic aspects of the subject through a discussion of the methods used to determine the yield of aquifers to a discussion of common problems encountered in the operation of ground-water supplies. Each section consists of a brief text and one or more drawings or maps that illustrate the main points covered in the text. Because the text is, in effect, an expanded discussion of the illustrations, most of the illustrations are not captioned. However, where more than one drawing is included in a section, each drawing is assigned a number, given in parentheses, and these numbers are inserted at places in the text where the reader should refer to the drawing. In accordance with U.S. Geological Survey policy to encourage the use of metric units, these units are used in most sections. In the sections dealing with the analysis of aquifer (pumping) test data, equations are given in both consistent units and in the inconsistent inch-pound units still in relatively common use among ground-water hydrologists and well drillers. As an aid to those who are not familiar with metric units and with the conversion of ground-water hydraulic units from inch-pound units to metric units, conversion tables are given on the inside back cover. Definitions of ground-water terms are given where the terms are first introduced. Because some of these terms will be new to many readers, abbreviated definitions are also given on the inside front cover for convenient reference by those who wish to review the definitions from time to time as they read the text. Finally, for those who need to review some of the simple mathematical operations that are used in ground-water hydrology, a section on numbers, equations, and conversions is included at the end of the text.

Water Supply Paper↗

Use of stable isotopes of carbon, nitrogen, and sulfur to identify sources of nitrogen in surface waters in the Lower Susquehanna River Basin, Pennsylvania

Samples of nitrogen-source material, soil, and water were collected from several small, primarily single-source subbasins in the Lower Susquehanna River Basin during 1988–90 to determine the feasibility of using measurements of stable isotope ratios of carbon ( 13 C), nitrogen ( 15 N), and sulfur ( 34 S) to identify sources of nitrogen (N) in stream water. Chemical and isotopic compositions were measured for six N-source types consisting of rain water, forest leaf litter, synthetic fertilizer, farm-animal manure, municipal-sewage effluent and sludge, and septictank effluent and sludge. Compositions of associated, nearby samples of topsoil, subsoil, runoff water, and stream water were measured to evaluate changes in compositions of transported N-containing materials near the N source. Animal manure, human waste (sewage plus septic), and forest-leaf litter can be distinguished on the basis of 13 C; however, most N-sources cannot be distinguished on the basis of 15 N and 34 S, owing to wide ranges and overlap of compositions among different N-source types. Although values of 15 N for soil and runoff-water samples are qualitatively similar to those of the applied N source, values of 13 C and 34 S for runoff-water and stream-water samples appear to reflect the compositions of relatively large reservoirs of the elements in soil organic matter and minerals, respectively, and not the composition of the applied N source. The ratio of organic carbon to total nitrogen (C-org:N), combined with 13 C, is useful for distinguishing agricultural soils, which have characteristically high 13 C and low C-org:N, from forested soils. The C-org:N values of suspended particulates in runoff or stream waters generally are lower than those of nearby soils, however, and indicate that chemical transformations and resultant isotopic fractionation can be important controls on the compositions of N-containing compounds in the soil and water. In aqueous samples including surface water and liquid N-sources, isotopic ratios commonly differ between coexisting dissolved fractions of NO 3- N and NH 3- N and between dissolved and particulate fractions of N or S, probably because of isotopic fractionation during transport or N-source processing. Isotopic measurements provide qualitative information about important reactions that can affect N concentrations in surface waters. However, mass-balance computations generally are not sufficiently accurate to estimate the proportions of multiple sources contributing to the N load in the streams studied because of (1) variations in source chemical and isotopic compositions and (2) nonconservative behavior and fractionation during transport over short distances (hundreds of meters). Uncertainties in mass-balance computations are complicated by the propagation of errors associated with measurements of discharge, chemical concentrations,and isotopic compositions of relatively dilute, small streams.

Pennsylvania↗

Validation of a numerical modeling method for simulating rainfall-runoff relations for headwater basins in western King and Snohomish Counties, Washington

The validity of a previously determined numerical modeling method was assessed. Numerical models for 11 drainage basins were constructed with the Hydrologic Simulation Program-FORTRAN (HSPF) with parameter values that were generalized for the physiographic region. Large and recurrent simulation errors were initially identified, but three systematic modifications of the models corrected those errors for 10 out of the 11 basins. The validity of the numerical modeling method for simulating rainfall-runoff relations in the study area, as modified during this investigation, was not rejected, but observed streamflow data were needed to apply the method.

Water Supply Paper↗