USGS Science⌕ Search

USGS · tm4C4

Design, analysis, and interpretation of field quality-control data for water-sampling projects

Abstract

The process of obtaining and analyzing water samples from the environment includes a number of steps that can affect the reported result. The equipment used to collect and filter samples, the bottles used for specific subsamples, any added preservatives, sample storage in the field, and shipment to the laboratory have the potential to affect how accurately samples represent the environment from which they were collected. During the early 1990s, the U.S. Geological Survey implemented policies to include the routine collection of quality-control samples in order to evaluate these effects and to ensure that water-quality data were adequately representing environmental conditions. Since that time, the U.S. Geological Survey Office of Water Quality has provided training in how to design effective field quality-control sampling programs and how to evaluate the resultant quality-control data. This report documents that training material and provides a reference for methods used to analyze quality-control data. Quality-control data are those generated from the collection and analysis of quality-control samples, and are used to estimate the magnitude of errors in the process of obtaining environmental data. “Bias” and “variability” are the terms used in this report for the two types of errors in environmental data that are quantified by the data from quality-control samples. Bias is the systematic error inherent in a method or measurement system. Variability is the random error that occurs in independent measurements. The types of field quality-control samples discussed in this report include blanks, spikes, and replicates. Blanks are samples prepared with water that is intended to be free of measurable constituents that will be analyzed by the laboratory; blanks are used to estimate bias caused by contamination. Spiked samples are modified by addition of specific analytes; spikes are used to determine the performance of analytical methods and to estimate the potential bias due to matrix interference or analyte degradation. Replicate samples are two or more samples that are considered to be essentially identical in composition. Replicates are used to evaluate variability in analytical results. Various sub-types of these quality-control samples are defined and discussed in this report, and guidance is provided for incorporating the proper samples into the design for a project. The concept of inference space is introduced to help determine where and when quality-control samples should be collected as well as which environmental samples are related to a set of quality-control samples. The recommended basic quality-control design incorporates project-specific considerations, such as the objectives and scale of the study, and hydrologic and chemical conditions within the study area. The report provides extensive information about statistical methods used to analyze quality-control data in order to estimate potential bias and variability in environmental data. These methods include construction of confidence intervals on various statistical measures, such as the mean, percentiles and percentages, and standard deviation. The methods are used to compare quality-control results with the larger set of environmental data in order to determine whether the effects of bias and variability might interfere with interpretation of these data. Examples from published reports are presented to illustrate how the methods are applied, how bias and variability are reported, and how the interpretation of environmental data can be qualified based on the quality-control analysis.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

David K. Mueller, Terry L. Schertz, Jeffrey D. Martin, Mark W. Sandstrom. 2015. Design, analysis, and interpretation of field quality-control data for water-sampling projects. https://doi.org/10.3133/tm4c4

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Methods and considerations for writing science syntheses for use in decision making on public lands

Natural resource managers are required by multiple laws to use science to inform decisions on public lands in the United States. However, large numbers of science papers about conservation and management of natural resources are published annually, increasing the amount of effort required to maintain awareness of the best available science on relevant topics. As a result, products that synthesize large bodies of science can be a key tool for communicating science to natural resource managers. This report provides guidance for writing synthesis products for resource managers. Core topics and steps include coproducing syntheses with managers, scoping topics relevant to management actions and potentially affected resources, using reproducible literature search and screening methods, extracting and synthesizing multiple types of management-relevant information from science papers, organizing the synthesis product according to decision-making processes, soliciting peer and end-user review, and planning dissemination activities tailored to resource managers. Considering these topics and steps in developing science synthesis products can facilitate natural resource managers’ ability to use science in decision making and help bridge the gap between research and public land management.

Techniques and Methods↗

An updated decision-support tool for grassland birds in the Avian-Impact Offset Method

The Avian-Impact Offset Method (AIOM) quantifies the displacement of grassland birds and waterfowl in response to energy infrastructure and estimates the amount of habitat needed to compensate for this loss. The AIOM converts the number of bird pairs lost owing to avian behavioral avoidance (also referred to as “displacement”) and estimates the site-specific hectares of grasslands or number of wetlands needed to compensate for displaced pairs of grassland birds or waterfowl, respectively. Decision-support tools spatially apply the AIOM to estimate grassland and wetland offsets and guide the location of offsetting measures. The revised decision-support tool for grassland birds and grassland offsets described in this report provides updated grassland layers for calculating offsets and updated bird models for guiding the location of offsetting measures.

Techniques and Methods↗

dMODELS, a MATLAB software package for modeling crustal deformation near volcanic centers and active faults using Global Navigation Satellite System data—User guide

dMODELS is a MATLAB software package that implements the most common analytical models used to interpret deformation measurements near faults and active volcanic centers. This manual focuses on inversion of deformation data from the Global Navigation Satellite System (GNSS). The included case studies emphasize the GNSS inversion component of the software. Source models include pressurized spherical, spheroidal, and horizontal sill (penny-crack) magma reservoirs in a homogeneous, elastic, isotropic, flat half-space. A topography correction is available for the spherical source. Dikes and faults are described following the mathematical notation for the rectangular dislocations in a homogeneous, elastic, flat half-space. Equations have been reviewed for typographical errors present in the original literature and verified against finite-element method numerical models. GNSS data from the 2006 eruption at Augustine Volcano, Alaska; the 1998–2000 unrest at Taal Volcano, Philippines; and the 2009 earthquake in L’Aquila, Italy, are used to demonstrate the application of the software package.

Techniques and Methods↗