USGS Science⌕ Search
Home/Archive/USGS

USGS · tem836C

"Granite" exploration hole, Area 15, Nevada Test Site, Nye County, Nevada : interim report, Part C, physical properties

Glen Arthur Izett
View original source ↗Read source document ↗Export metadata ↓

Abstract

Physical properties measurements including porosity, density, permeability, magnetic susceptibility, and thermal conductivity were made on granite samples from the U-15A 'Granite' exploration borehole, Nevada Test Site, Nye County, Nevada. Porosity values range from 0.4 to 4.8 percent, and density values range from 2.56 to 2.69 g/cc (bulk density) and from 2.66 to 2.72 g/cc (grain density). Permeability of fresh rock from the borehole is probably less than 10 -13 millidarcies. Magnetic susceptibility measurements range from 0.36 to 3.48 x 10 -3 cgs units, and thermal conductivity values range from 5.6 to 8.1 cgs units.

Explore related subjects

Trace Elements MemorandumReport

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Glen Arthur Izett. 1960. "Granite" exploration hole, Area 15, Nevada Test Site, Nye County, Nevada : interim report, Part C, physical properties. https://doi.org/10.3133/tem836c

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS1959

Lithologic log and drilling information for the Marble exploration hole 3, U15 area, Nevada Test Site, Nye County, Nevada

The Marble exploration hole 3 is in the northern part of the Tippipah Spring NE 7-1/2 minute quadrangle at the north end of Yucca Valley (fig.1). The collar elevation of the hole is about 5,316 feet and has the approximate Nevada State coordinates of N. 903,093 and E. 674,870. The hole was drilled to determine the physical and chemical properties of the marble within a radius of 200 feet of a point 950 feet below the surface. The exploration hole is 978 feet deep and was drilled from June 12 to July 8, 1959, by Minerals Engineering Co. of Grand Junction, Colorado, using conventional NX coring equiipment and a Portadrill 2,500 drill rig. Water-base bentonitic mud was used as the drilling fluid in the upper part of the hole. Clear water was used after circulation became unrestorable below 200 feet. The hole was cased from surface to 20 feet. The drilling rate during coring ranged from 2.0 to 19.3 minutes per foot and averaged 4.6 minutes per foot (table 1). The core recovered was excellent in quality and quantity. The average core recovery is 92.7 percent (table 2).

Nevada↗
USGS1959

Thickness, character, and structure of upper Permian evaporites in part of Eddy County, New Mexico

Between Project Gnome site and the International Minerals and Chemical Corporation's plant site, in central eastern Eddy County, N. Mex., unconsolidated deposits of Quaternary age and redbeds of Triassic age attain a thickness of about 700 feet, and rest unconformably on evaporites of late Permian age. The upper Permian evaporites are 3,000 to 3,800 feet thick, and they are divided, in descending order, into the Rustler, Salado, and Castile formations. The Rustler is largely gypsum rock, the Salado is dominantly halite rock, and the Castile contains both anhydrite rock and halite rock. The salt and anhydrite beds of the Salado and Castile are intruded by narrow dikes of alkalic rock along which the evaporites are little altered. The sedimentary rocks have a generally southeastward regional dip, but locally are warped in gentle folds of low amplitude and fairly small lateral dimensions.

New Mexico↗