USGS Science⌕ Search

USGS · sir20195115

A probabilistic assessment methodology for carbon dioxide enhanced oil recovery and associated carbon dioxide retention

Abstract

The U.S. Energy Independence and Security Act of 2007 authorized the U.S. Geological Survey (USGS) to conduct a national assessment of the potential volume of hydrocarbons recoverable by injection of carbon dioxide (CO 2 ) into known oil reservoirs with historical production. The implementation of CO 2 enhanced oil recovery (CO 2 -EOR) techniques could increase the U.S. recoverable hydrocarbon resource base. Use of anthropogenic CO 2 in the CO 2 -EOR process could reduce the amount of CO 2 released to the atmosphere by allowing a percentage of the injected CO 2 to remain in reservoir pore space once occupied by produced oil and water or by CO 2 dissolution in oil and water in the reservoir. The USGS has developed a new methodology for the national assessment of technically recoverable oil resources that may be produced by using current CO 2 -EOR technologies. The methodology relies on a proprietary reservoir-level database, the comprehensive resource database (CRD). The CRD incorporates commercially available geologic and engineering data, and USGS-defined play averages or province averages of reservoir data were used to populate incomplete records. Values from the CRD are used to estimate the original oil in place ( OOIP ) for each reservoir. The inputs are reviewed by USGS geologists, particularly when play or province averages have been used. Monte Carlo simulation is used to produce a numerical probability distribution for the OOIP for each reservoir, with the mean defined as the value of the OOIP in the CRD. A reservoir model (CO 2 Prophet, developed for the U.S. Department of Energy by Texaco, Inc.) is used to determine the incremental recovery factors for oil during the CO 2 -EOR process, on an individual reservoir basis. The model is also used to estimate the volume of CO 2 remaining in the reservoir after the CO 2 -EOR process is complete. Empirical decline curve analysis and comparison with data from published papers and reports on CO 2 -EOR projects are utilized to substantiate the simulation results. Numerical distributions of recovery factors are prepared for variations in the reservoir lithology (clastic or carbonate). The distribution of incremental oil is computed by multiplying the appropriate probability distribution of recovery factors by the individual reservoir distribution of the OOIP . A way to estimate the CO 2 remaining in the reservoir after the completion of the CO 2 -EOR process is also included in the methodology. Assessment results will be aggregated to play, petroleum province, regional, and national scales. This assessment methodology has been tested on the Horseshoe Atoll, Upper Pennsylvanian-Wolfcampian play in the Permian Basin Province in Texas; the play consists of 27 reservoirs having at least 2 billion barrels of OOIP that are amenable to the CO 2 -EOR process. The play was selected as a test case because CO 2 -EOR production data and published reports are available for several reservoirs within the play. Preliminary estimates of oil recoverable by implementation of miscible CO 2 -EOR are comparable to those reported in the literature and obtained by reservoir decline curve analysis.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Peter D. Warwick, Emil D. Attanasi, Ricardo A. Olea, Madalyn S. Blondes, Philip A. Freeman, Sean T. Brennan, Matthew D. Merrill, Mahendra K. Verma, C. Özgen Karacan, Jenna L. Shelton, Celeste D. Lohr, Hossein Jahediesfanjani, Jacqueline N. Roueche. 2019-12-31. A probabilistic assessment methodology for carbon dioxide enhanced oil recovery and associated carbon dioxide retention. https://doi.org/10.3133/sir20195115

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Baseline water-quality inventory and summary for the Paterson Great Falls National Historical Park, New Jersey

The Paterson Great Falls National Historical Park (PAGR), established in 2011 in the City of Paterson, New Jersey, contains many cultural, historical, and natural resources. Because of the PAGR’s young age and limited resources, a long record of natural resource data is not available for use to guide future park management and planning decisions. A detailed natural resource inventory was identified as an immediate need in the “Foundation Document—Paterson Great Falls National Historical Park,” given the history of extensive industrial activity throughout the PAGR and the Passaic River Basin. The U.S. Geological Survey, in cooperation with the National Park Service and the Urban Waters Federal Partnership for the Lower Passaic River, inventoried water-quality monitoring efforts and compiled historical water-quality data from secondary data sources to define baseline conditions in the PAGR and the surrounding study area. This report documents the methods used to harmonize water-quality data aggregated from multiple sources for the PAGR study area. Procedures implemented during data harmonization include compiling data from multiple sources, assessing the dataset for completeness, addressing metadata concerns, and creating a consistent and quality-assured dataset for future analysis. The harmonized dataset contains 14 aggregated surface-water sites, 1,103 individual sampling days, and 32,000 water-quality records throughout the period of record defined for this study (1952–2021). Summary statistics and comparison to water-quality criteria are provided for focus parameters that can support PAGR management, including field properties, suspended material, total dissolved solids, specific conductance, chloride, sulfate, Escherichia coli, nutrients, contaminants of concern related to fish consumption advisories, and litter and floatable debris. A spatial data gap was identified for the recreational area near the base of the Great Falls and immediately downstream from a known combined sewer overflow discharge location. Analytic data gaps were identified for continuous streamflow and water-quality parameters, floatable debris characterization, and harmful algal blooms identification. Continuous collection of contaminants of concern was identified as a temporal data gap, as these parameters were not consistently collected within the study area. The water-quality data synthesis and summary presented in this report can assist PAGR staff in understanding the complex baseline water resources within the study area and can serve as a baseline to design future water-quality monitoring efforts and evaluate changes in water quality over time. The harmonized dataset, as well as future New Jersey Department of Environmental Protection and New Jersey Harbor Discharge Group monitoring data and assessments, can also be used to examine the status and trends in surface-water quality, support compliance with the Clean Water Act (33 U.S.C. 1251 et seq.), and further investigate changes to park water resources that can affect ecological and human health.

New Jersey↗

Slip tendency and dilation tendency of Quaternary faults in the Great Basin region, Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming

This report presents the results of slip tendency and dilation tendency analysis of Quaternary faults in the Great Basin region, in the states of Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming. This effort was undertaken as part of two studies: the U.S. Department of Energy Geothermal Technologies Office-funded Innovative Geothermal Exploration through Novel Investigations of Undiscovered Systems (INGENIOUS) project, which is a multidisciplinary, multi-institution effort to develop new methodologies and best practices to accelerate the discovery of new, commercially viable hydrothermal resources; and the U.S. Geological Survey Geothermal Resources Investigations Project. The goal of this work is to identify faults and fault segments that are appropriately oriented to be stress-loaded for slip or to dilate under the ambient stress conditions. Both conditions may make such faults more likely to host permeability and fluid flow relative to other faults in the region. Slip tendency and dilation tendency were calculated for all fault segments in the study area from the U.S. Geological Survey Quaternary Fault and Fold Database. Results demonstrate that faults with high slip tendency and dilation tendency are common in the Great Basin region. The areas containing many high slip tendency and dilation tendency fault segments are associated with high strain rates. These areas also host a relatively high proportion of the known hydrothermal systems. This indicates that faults with high slip tendency and dilation tendency in areas with high strain-rate are potentially most prospective for hosting hydrothermal systems. The database published in coordination with this report contains the slip tendency and dilation tendency results data, including the fault geometry and stress data used to calculate these quantities, for both the Great Basin study area and the smaller INGENIOUS study area.

Arizona, California, Idaho, Nevada, Oregon, Utah, ↗

A spatial analysis of the groundwater emergence flood hazard in Long Island, New York, and coastal areas surrounding Long Island Sound in New York, Connecticut, and Rhode Island

Long Island, New York, and nearby coastal areas surrounding Long Island Sound are densely populated and, like other coastal areas, are susceptible to flooding from several potential sources, including stormwater from precipitation events, tidal flooding and storm surge, and groundwater emergence flooding. Groundwater emergence fooding refers to the intersection of a rising water table with land surface or critical infrastructure. Many studies of flood drivers either neglect or only briefly discuss how shallow groundwater conditions may contribute to or exacerbate flood conditions. As a part of a comprehensive study of compound flood hazards in the coastal areas of Long Island and Long Island Sound, a spatial analysis was completed by the U.S. Geological Survey, in cooperation with the Environmental Protection Agency’s Long Island Sound Partnership, formerly called the Long Island Sound Study, using available regional datasets to characterize the potential hazard for groundwater emergence flooding. The approximately 3,100 square mile study area was subdivided into 11,407 grid cells that were 900 meters by 900 meters (approximately 3,000 feet by 3,000 feet), for the purpose of integrating the spatial datasets to calculate and map the groundwater emergence flood hazard. The depth to the water table, hydrologic soil groups, and National Land Cover Database were harmonized to the common grid. A groundwater emergence flood hazard score was calculated for each grid cell for current average conditions following a set of rules accounting for the depth to the water table and the percentage of area within each cell with slow infiltrating soils. A scenario with a higher sea-level position was also calculated for the Long Island part of the study area. The calculated groundwater emergence flood hazard score was reviewed in conjunction with the National Land Cover Database to identify developed areas and associated infrastructure that may be at risk of potential groundwater emergence flooding. Study results indicate that the groundwater emergence flood hazard is highest in coastal areas and near surface water where the water table is close to ground surface. Inland areas away from surface waterbodies are not likely to be exposed to groundwater emergence flooding. For Long Island, in the scenario with higher sea-level position, a greater groundwater emergence flood hazard is calculated for some locations closer to the coast and where land is submerged. Away from the coast and surface-water drainage, the groundwater emergence flood hazard is similar between the current average sea-level condition and the higher sea-level position scenario.

Connecticut, New York, Rhode Island↗