USGS Science⌕ Search

USGS · sir20195092

Sediment and chemical contaminant loads in tributaries to the Anacostia River, Washington, District of Columbia, 2016–17

Abstract

A study was conducted by the U.S. Geological Survey (USGS) in cooperation with the Washington, D.C., Department of Energy & Environment to estimate the loads of suspended-sediment-bound chemical compounds in five gaged tributaries and four ungaged tributaries of the Anacostia River (known locally as “Lower Anacostia River”) in Washington, D.C. Tributaries whose discharge is measured by the USGS are the Northeast and Northwest Branches of the Anacostia River, referred to in this report as “Northeast Branch” (NEB) and “Northwest Branch” (NWB), respectively; Watts Branch (WB); and Hickey Run (HR). A USGS streamflow-gaging station was established in 2016 on Beaverdam Creek (known locally as “Lower Beaverdam Creek” [LBDC]) to support this study. The ungaged streams studied include Nash Run; Pope Branch; an unnamed stream at Fort DuPont, referred to in this report as “Fort DuPont Creek”; and an unnamed stream at Fort Stanton, referred to in this report as “Fort Stanton Creek.” The gaged streams were sampled during four to five storms and two low-flow events during January, March, May, and July 2017. The ungaged streams were sampled during one storm and one low-flow event during July 2017. Storm sampling involved collecting large-volume (60- to 70-liter) composite samples, then removing sediment by filtration in the laboratory. Low-flow samples were obtained by filtering streamwater directly in the field. Continuously recording data sondes were deployed throughout the study to measure turbidity and other water-quality characteristics. During sampling, multiple discrete samples of streamwater were collected to determine suspended-sediment concentration (SSC) and particulate organic carbon (POC) concentration. Shortly after each storm, bed sediment was collected for chemical analysis. Sediment samples were analyzed for 209 polychlorinated biphenyl (PCB) congeners; 35 polyaromatic hydrocarbon (PAH) compounds, including 20 nonalkylated and 15 alkylated species; and 20 organochlorine pesticide (OP) compounds. Sediment from one storm was analyzed for 23 metals. Relations were developed among turbidity, discharge, and measured SSC by using multiple linear regression of log-transformed data. These relations were used to estimate SSC from continuous records of discharge and turbidity and were subsequently used to estimate sediment loads for the 2017 calendar year. USGS continuous records of turbidity in NEB, NWB, Watts Branch, and Hickey Run were available for 2013–17, which allowed sediment loads to be calculated for these years. Sediment loads for the ungaged streams were estimated by using loads measured in Watts Branch adjusted on the basis of stream-basin areas. Sediment loads for 2017 total 3.10×10 7 kilograms (kg), with 1.02×107 kg (33 percent of total) from the NEB, 1.55×10 7 kg (50 percent) from the NWB, 4.45×10 6 kg (14 percent) from LBDC, 5.62×10 5 kg (2 percent) from Watts Branch, and 2.82×10 5 kg (1 percent) from Hickey Run. Sediment yields were highest from NWB and LBDC (3.13×10 5 kilograms per year per square mile [kg/yr/mi 2 ] and 3.01 kg/yr/mi 2 , respectively). As a result of gaps in turbidity and discharge data, the load for LBDC reported here was calculated from measurements representing only 88 percent of the year (2017), and thus underestimates the actual load. All other gaged tributaries had datasets covering 100 percent of the year and are considered to fully represent actual loads. Estimated sediment loads for the ungaged streams during 2017 total 3.5×10 5 kg, with 1.2×10 5 kg from Nash Run, 6.2×10 4 kg from Pope Branch, 1.1×10 5 kg from Fort DuPont Creek, and 5.6×10 4 kg from Fort Stanton Creek. Concentrations of PCBs, PAHs, and chlorinated pesticides in streamwater are presented for stormflow and low-flow conditions. Average concentrations (in stormflow and low-flow samples) of total PCBs (sum of all congeners, including coelutions) are 5.9 micrograms per kilogram (µg/kg) for NEB, 6.6 µg/kg for NWB, 130 µg/kg for LBDC, 34 µg/kg for Watts Branch, and 69 µg/kg for Hickey Run. Average concentrations of total PAHs (tPAH) (total of nonalkylated and alkylated species) are 2,000 µg/kg for NEB, 3,300 µg/kg for NWB, 2,200 µg/kg for LBDC, 2,400 µg/kg for Watts Branch, and 18,000 µg/kg for Hickey Run. tPAH concentrations among the ungaged streams were highest in Nash Run (5,500 µg/kg); concentrations in the other ungaged streams were less than (<) 700 µg/kg. The general magnitude of tPCB and tPAH concentrations in streamwater samples was low-flow samples greater than (>) stormflow samples greater than or equal to (≥) bed-sediment samples. PCB congener profiles in the three types of samples were nearly identical in each stream and were similar in all streams except for LBDC, where the dominant PCBs shifted to the lighter di- through tetra- homologs. LBDC showed higher tPCB concentrations and a distinct congener profile from the other streams. The similarity in congener makeup supported that averaging PCB concentrations in stormflow and low-flow samples was appropriate for calculating chemical loads. Loads of tPCB, tPAH (total of alkylated and nonalkylated forms), and pesticides were estimated for each stream by multiplying average contaminant concentrations by the respective sediment loads. Total PCB loads for 2017 were estimated to be 820 grams (g) with 8 percent (60 g) from NEB, 12 percent (95 g) from NWB, 75 percent (590 g) from LBDC, 3 percent (25 g) from Watts Branch, and 2.5 percent (19 g) from Hickey Run. PCB toxicity totaled 3.8×10 −3 µg/kg, with the largest contribution (47 percent) derived from LBDC. Total PAH loads (sum of alkylated and nonalkylated forms) for 2017 were estimated to be 89,000 g, with 23 percent (20,000 g) from NEB, 59 percent (52,000 g) from NWB, 11 percent (9,800 g) from LBDC, 2 percent (1,400 g) from Watts Branch, and 6 percent (5,200 g) from Hickey Run. These results indicate that the largest contributor (75 percent) of PCBs to the Anacostia River is LBDC, although it contributes only 15 percent of the sediment and its basin area represents only 10 percent of the area of the Anacostia River watershed. The majority of the PAH load originates from NWB (59 percent of total) and NEB (22 percent). The ungaged tributaries contribute extremely small loads of PCBs and PAHs, totaling 8.1 g and 765 kg, respectively. More than 94 percent of the total load from the ungaged tributaries is derived from the Nash Run Basin. Various organochlorine pesticides were present in suspended and bed sediment from all gaged and ungaged tributaries; however, elevated detection levels associated with the analytical methods resulted in numerous unquantifiable concentrations in the suspended-sediment samples. Only the pesticide chlordane was found in measurable concentrations in all gaged tributaries. As a result, in this report, a combination of analytical data from suspended-sediment and bed-sediment samples was used to estimate the maximum pesticide loading for each tributary. Chlordane was the principal compound present in the gaged tributaries; the highest average concentration (average of stormflow and low-flow samples from each stream) was 62 µg/kg in sediment from Watts Branch. Chlordane loads for 2017 totaled 1,100 g, of which 7 percent (430 g) was from NEB, 28 percent (320 g) was from NWB, 28 percent (310 g) was from LBDC, 5 percent (56 g) was from Watts Branch, and 1 percent (11 g) was from Hickey Run. Chlordane was not present in suspended or bed sediment from any of the ungaged tributaries. Loads of the other pesticides were estimated by using the highest concentration measured in the combined suspended-sediment and bed-sediment data for each stream. Notable loads include dieldrin (860 g from NWB), methoxychlor (205 g from LBDC), endrin aldehyde (150 g from NWB), and 4,4-DDT (79 g from Watts Branch). Compared with pesticide loads from the gaged streams, those from the ungaged streams were minimal, with only the Pope Branch contribution exceeding 1 gram per year for 4,4-DDE (1.05 g) and 4,4’-DDT (1.3 g). The results of this study show that the dominant source of PCBs and chlordane is LBDC, despite its relatively small basin area. PAHs are ubiquitous throughout the study area, with the largest sources being NEB and NWB; this finding is a result of the large sediment load originating from these basins. The small, ungaged streams supply only minimal PCB and PAH loads, with Nash Run being the largest contributor.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 38.8447° to 39.1611° latitude; -77.0797° to -76.7689° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Timothy P. Wilson. 2020-02-28. Sediment and chemical contaminant loads in tributaries to the Anacostia River, Washington, District of Columbia, 2016–17. https://doi.org/10.3133/sir20195092

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Baseline water-quality inventory and summary for the Paterson Great Falls National Historical Park, New Jersey

The Paterson Great Falls National Historical Park (PAGR), established in 2011 in the City of Paterson, New Jersey, contains many cultural, historical, and natural resources. Because of the PAGR’s young age and limited resources, a long record of natural resource data is not available for use to guide future park management and planning decisions. A detailed natural resource inventory was identified as an immediate need in the “Foundation Document—Paterson Great Falls National Historical Park,” given the history of extensive industrial activity throughout the PAGR and the Passaic River Basin. The U.S. Geological Survey, in cooperation with the National Park Service and the Urban Waters Federal Partnership for the Lower Passaic River, inventoried water-quality monitoring efforts and compiled historical water-quality data from secondary data sources to define baseline conditions in the PAGR and the surrounding study area. This report documents the methods used to harmonize water-quality data aggregated from multiple sources for the PAGR study area. Procedures implemented during data harmonization include compiling data from multiple sources, assessing the dataset for completeness, addressing metadata concerns, and creating a consistent and quality-assured dataset for future analysis. The harmonized dataset contains 14 aggregated surface-water sites, 1,103 individual sampling days, and 32,000 water-quality records throughout the period of record defined for this study (1952–2021). Summary statistics and comparison to water-quality criteria are provided for focus parameters that can support PAGR management, including field properties, suspended material, total dissolved solids, specific conductance, chloride, sulfate, Escherichia coli, nutrients, contaminants of concern related to fish consumption advisories, and litter and floatable debris. A spatial data gap was identified for the recreational area near the base of the Great Falls and immediately downstream from a known combined sewer overflow discharge location. Analytic data gaps were identified for continuous streamflow and water-quality parameters, floatable debris characterization, and harmful algal blooms identification. Continuous collection of contaminants of concern was identified as a temporal data gap, as these parameters were not consistently collected within the study area. The water-quality data synthesis and summary presented in this report can assist PAGR staff in understanding the complex baseline water resources within the study area and can serve as a baseline to design future water-quality monitoring efforts and evaluate changes in water quality over time. The harmonized dataset, as well as future New Jersey Department of Environmental Protection and New Jersey Harbor Discharge Group monitoring data and assessments, can also be used to examine the status and trends in surface-water quality, support compliance with the Clean Water Act (33 U.S.C. 1251 et seq.), and further investigate changes to park water resources that can affect ecological and human health.

New Jersey↗

Slip tendency and dilation tendency of Quaternary faults in the Great Basin region, Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming

This report presents the results of slip tendency and dilation tendency analysis of Quaternary faults in the Great Basin region, in the states of Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming. This effort was undertaken as part of two studies: the U.S. Department of Energy Geothermal Technologies Office-funded Innovative Geothermal Exploration through Novel Investigations of Undiscovered Systems (INGENIOUS) project, which is a multidisciplinary, multi-institution effort to develop new methodologies and best practices to accelerate the discovery of new, commercially viable hydrothermal resources; and the U.S. Geological Survey Geothermal Resources Investigations Project. The goal of this work is to identify faults and fault segments that are appropriately oriented to be stress-loaded for slip or to dilate under the ambient stress conditions. Both conditions may make such faults more likely to host permeability and fluid flow relative to other faults in the region. Slip tendency and dilation tendency were calculated for all fault segments in the study area from the U.S. Geological Survey Quaternary Fault and Fold Database. Results demonstrate that faults with high slip tendency and dilation tendency are common in the Great Basin region. The areas containing many high slip tendency and dilation tendency fault segments are associated with high strain rates. These areas also host a relatively high proportion of the known hydrothermal systems. This indicates that faults with high slip tendency and dilation tendency in areas with high strain-rate are potentially most prospective for hosting hydrothermal systems. The database published in coordination with this report contains the slip tendency and dilation tendency results data, including the fault geometry and stress data used to calculate these quantities, for both the Great Basin study area and the smaller INGENIOUS study area.

Arizona, California, Idaho, Nevada, Oregon, Utah, ↗

A spatial analysis of the groundwater emergence flood hazard in Long Island, New York, and coastal areas surrounding Long Island Sound in New York, Connecticut, and Rhode Island

Long Island, New York, and nearby coastal areas surrounding Long Island Sound are densely populated and, like other coastal areas, are susceptible to flooding from several potential sources, including stormwater from precipitation events, tidal flooding and storm surge, and groundwater emergence flooding. Groundwater emergence fooding refers to the intersection of a rising water table with land surface or critical infrastructure. Many studies of flood drivers either neglect or only briefly discuss how shallow groundwater conditions may contribute to or exacerbate flood conditions. As a part of a comprehensive study of compound flood hazards in the coastal areas of Long Island and Long Island Sound, a spatial analysis was completed by the U.S. Geological Survey, in cooperation with the Environmental Protection Agency’s Long Island Sound Partnership, formerly called the Long Island Sound Study, using available regional datasets to characterize the potential hazard for groundwater emergence flooding. The approximately 3,100 square mile study area was subdivided into 11,407 grid cells that were 900 meters by 900 meters (approximately 3,000 feet by 3,000 feet), for the purpose of integrating the spatial datasets to calculate and map the groundwater emergence flood hazard. The depth to the water table, hydrologic soil groups, and National Land Cover Database were harmonized to the common grid. A groundwater emergence flood hazard score was calculated for each grid cell for current average conditions following a set of rules accounting for the depth to the water table and the percentage of area within each cell with slow infiltrating soils. A scenario with a higher sea-level position was also calculated for the Long Island part of the study area. The calculated groundwater emergence flood hazard score was reviewed in conjunction with the National Land Cover Database to identify developed areas and associated infrastructure that may be at risk of potential groundwater emergence flooding. Study results indicate that the groundwater emergence flood hazard is highest in coastal areas and near surface water where the water table is close to ground surface. Inland areas away from surface waterbodies are not likely to be exposed to groundwater emergence flooding. For Long Island, in the scenario with higher sea-level position, a greater groundwater emergence flood hazard is calculated for some locations closer to the coast and where land is submerged. Away from the coast and surface-water drainage, the groundwater emergence flood hazard is similar between the current average sea-level condition and the higher sea-level position scenario.

Connecticut, New York, Rhode Island↗