USGS Science⌕ Search

USGS · sir20155106

Hydrologic budget and conditions of Permian, Pennsylvanian, and Mississippian aquifers in the Appalachian Plateaus physiographic province

Abstract

In response to challenges to groundwater availability posed by historic land-use practices, expanding development of hydrocarbon resources, and drought, the U.S. Geological Survey Groundwater Resources Program began a regional assessment of the Appalachian Plateaus aquifers in 2013 that incorporated a hydrologic landscape approach to estimate all components of the hydrologic system: surface runoff, base flow from groundwater, and interaction with atmospheric water (precipitation and evapotranspiration). This assessment was intended to complement other Federal and State investigations and provide foundational groundwater-related datasets in the Appalachian Plateaus. A regional Soil-Water-Balance model was constructed for a 160,000-square-mile study area that extended to the topographic divide of all streams originating outside but flowing into areas underlain by Appalachian Plateaus aquifers. The model incorporated soil, landscape, and climate variables to estimate an annual water budget for the 32-year period from 1980 to 2011 and was calibrated using base-flow data estimated by hydrograph separation techniques from 20 streamflow gaging stations across the study area. Over this period, an average of 47 inches per year (in/yr) of precipitation fell on Appalachian Plateaus aquifers. Simulations from the regional Soil-Water-Balance model indicate that only 19 percent of the precipitation or an average 9 in/yr recharged aquifers, and 19 percent resulted in surface runoff to streams. The remaining 62 percent, an average of 27 in/yr of water, was returned to the atmosphere via evapotranspiration. Because withdrawals from aquifers due to pumping equated to less than 1 percent of the water budget, differences in predevelopment and postdevelopment regional water budgets of the Appalachian Plateaus were minimal. Storage changes caused by filling of abandoned coal-mine aquifers and long-term differences in aquifer storage resulting from climate fluctuations constitute a small portion of the overall water budget. The percentage of precipitation that results in recharge, runoff, or evapotranspiration from the landscape varies annually by up to a factor of two depending on temporal changes in prevailing climate conditions and spatial changes in basin characteristics, precipitation patterns, and sources of atmospheric moisture over a large study area. A comparison of water-budget estimates from the regional Soil-Water-Balance model for a dry year (1988) and wet year (2004) showed that evapotranspiration accounts for most of the annual differences in precipitation. As a portion of annual precipitation, evapotranspiration ranged from 69 percent (dry year) to 52 percent (wet year), a range four times greater than the 15 percent (dry year) to 18 percent (wet year) range estimated for recharge. Evapotranspiration as a percentage of precipitation peaks during dry periods, whereas base flow and runoff tend to reach minimum values. During wet periods, this relationship is reversed and base flow and runoff as a percentage of precipitation generally peak while evapotranspiration percentages reach minimum values. Annual recharge in the Appalachian Plateaus reaches a maximum at near 20 percent of annual precipitation, regardless of the severity of wet conditions. Hydrograph separation data from 849 streamflow gaging stations in the study area were used to assess trends in streamflow, base flow, surface runoff, and base-flow index, or ratio of base flow to streamflow, in the Appalachian Plateaus for the period from 1930 to 2011. Annual data anomalies for each of the four variables were individually defined as the annual standard deviation from the mean at all 849 streamflow gaging stations. Annual data anomalies confirm the close relation of annual precipitation to both base flow and runoff components of streamflow, and both components increased during the period of analysis. Around 1970, conditions shifted streamflow from values generally below to above long-term means. At a regional scale, increases in base flow account for most of these observed increases in mean annual streamflow. The independence of the base-flow index to annual climate trends indicate that changes in the components of streamflow of the Appalachian Plateaus are probably in response to shifts in seasonal precipitation or widespread land-use practices. A subset of 77 index streamgages, defined as having 60 or more years of complete record between the years 1930 and 2011 with no more than 20 percent missing data, was selected to show spatial patterns of change in the water budget. Data from the index streamgages showed that the overall trends in base flow are dependent upon the period of evaluation. Long-term (1930–2011) increases in base flow were observed throughout the study area. For two shorter periods (1930–1969 and 1970–2011) trends in base flow were largely negative. In general, spatial patterns of change in streamflow, base flow, and runoff were mixed but generally consistent with prevailing climate patterns and land-use changes.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 32.62087018318113° to 41.83682786072714° latitude; -88.39599609375° to -76.31103515625° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kurt J. McCoy, Richard M. Yager, David L. Nelms, David E. Ladd, Jack Monti,, Mark D. Kozar. 2015-08-13. Hydrologic budget and conditions of Permian, Pennsylvanian, and Mississippian aquifers in the Appalachian Plateaus physiographic province. https://doi.org/10.3133/sir20155106

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Evaluating the number of realizations (train-test splits) necessary to ensure robust estimates of conventional hydrothermal resource favorability using Monte Carlo cross-validation, the Great Basin, Western USA

Supervised machine learning approaches used to produce favorability maps in resource assessments commonly partition an input dataset into training and testing subsets (that is, through train-test splits). However, if a single split is not representative of underlying resource conditions, the resulting favorability map may be biased, particularly with sparse or heterogeneous datasets. To mitigate the potential for unrepresentative favorability maps, recent works by U.S. Geological Survey researchers have used Monte Carlo cross-validation to implement a large number ( n) of randomized train-test splits to produce n realizations. The realizations are then aggregated using cell-wise median predictions to produce the resulting final favorability map, recognizing that the median will remove extreme values that might have been estimated from a comparatively few unrepresentative realizations. Theoretically, the median prediction at every cell converges to a single estimate as n approaches infinity, and the question addressed herein is: How many realizations are necessary to get a robust estimate (that is, an estimate unaffected by additional realizations)? Therefore, convergence metrics are described to identify the number of train-test splits and realizations needed to make a reliable map using the data and supervised machine learning workflow for conventional hydrothermal resource assessment of the Great Basin of the Western United States. For this study, robust prediction occurs with n approximately equal to 600 realizations, and smaller ensembles (for example, n is approximately equal to 200 or even 100) may be suitable during preliminary or exploratory analyses. Although the resulting threshold numbers will vary depending on the data and modeling approach used, the convergence metrics proposed and applied herein are applicable to other supervised machine learning studies that use Monte Carlo cross-validation.

Scientific Investigations Report↗

Groundwater budget for the Portneuf River Basin, southeastern Idaho

The U.S. Geological Survey, in cooperation with the Idaho Department of Water Resources, developed the first groundwater budget for the upper Portneuf River Basin in southeastern Idaho, a tributary of the Snake River. A groundwater budget for the Portneuf River Basin supports water resource and administrative management decisions within the basin and for downstream users of the eastern Snake River Plain aquifer. The analysis quantifies inflows, outflows, and residuals for an aquifer system defined by the Idaho Department of Water Resources under three recent precipitation conditions: an average year (2016), a dry year (2021), and a wet year (2023). The budget was calculated for the basin and for two subbasins delineated by the U.S. Geological Survey streamgage Portneuf River at Topaz, Idaho (13073000): the above Topaz subbasin, which includes the Portneuf-Gem valley, and the below Topaz subbasin, which includes Marsh Valley. Aquifer inflows include mountain-front recharge; areal recharge; recharge from applied water, including recharge from irrigation, canal seepage, and effluent returns; groundwater flow into the basin; and reservoir seepage. Outflows include groundwater pumping for agricultural, municipal, and domestic uses; subsurface outflow through the Portneuf gap; and discharge to streams as base flow. Estimated annual inflows for the full basin ranged from 116,880 acre-feet in 2021 to 154,880 acre-feet in 2023, and outflows ranged from 132,190 acre-feet in 2016 to 158,490 acre-feet in 2023. Basinwide residuals, the change in storage plus uncertainty, were −2,410 acre-feet in 2016, −18,410 acre-feet in 2021, and −3,610 acre-feet in 2023, and each subbasin had a mixture of negative and positive residuals. These basinwide results, interpreted as change in storage plus water-budget uncertainty, indicate minor net losses that increase with dry conditions, consistent with well depth-to-water measurements indicating gradual multi-decadal declines. Patterns in subbasin residuals are driven by irrigation practices and surface-water management; for example, the above Topaz subbasin relies more on groundwater for irrigation, resulting in more negative residuals during dry years. In contrast, the below Topaz subbasin depends more on surface water, producing positive residuals during dry years because of irrigation losses and canal seepage. The analyses for both subbasins indicate decades-long groundwater declines, which agree with the overall negative residuals calculated. The largest sources of uncertainty include climate inputs (precipitation and evapotranspiration) and poorly constrained components such as groundwater inflow and tributary stream infiltration. These findings provide insight into how climatic variables and irrigation practices affect groundwater inflows and outflows within the Portneuf River Basin.

Idaho↗

World minerals outlook—Antimony, copper, graphite, niobium, potash, silicon, silver, and tungsten through 2030

Demand for mineral commodities continues to increase owing to rapid technological advancements and global economic growth. To support this increase in demand, information about current and near-term supplies of these mineral commodities is essential. Such data help evaluate the health and stability of global supply chains and protect against potential supply risks. Current production and production capacity data coupled with information regarding near-term expected changes (such as facility closures, planned expansions, or the completion of new mineral production projects) can provide insight into expected future market developments and expected available supply of mineral commodities. This report within the “World Minerals Outlook” series analyzes data for antimony, copper, natural graphite, niobium, potash, silicon metal, silver, and tungsten—eight mineral commodities listed in the 2025 List of Critical Minerals. World production data from 2019 through 2025, as well as estimated world capacity data from 2023 through 2025 were analyzed. Using these data, near-term (2026–2030) expected world capacities were estimated. For antimony, copper, niobium, silicon metal, silver, and tungsten, modest increases in production capacity of 4 to 10 percent were expected between 2025 and 2030, whereas capacities for natural graphite and potash were expected to increase by about 18 to 20 percent.

Scientific Investigations Report↗