Status and understanding of groundwater quality in the Sierra Nevada Regional study unit, 2008: California GAMA Priority Basin Project

Miranda S. Fram; Kenneth Belitz

doi:10.3133/sir20145174

Home/Archive/USGS

USGS · sir20145174

Status and understanding of groundwater quality in the Sierra Nevada Regional study unit, 2008: California GAMA Priority Basin Project

Miranda S. Fram·Kenneth Belitz

View original source ↗Read source document ↗Export metadata ↓

Abstract

Groundwater quality in the Sierra Nevada Regional (SNR) study unit was investigated as part of the California State Water Resources Control Board’s Groundwater Ambient Monitoring and Assessment Program Priority Basin Project. The study was designed to provide statistically unbiased assessments of the quality of untreated groundwater within the primary aquifer system of the Sierra Nevada. The primary aquifer system for the SNR study unit was delineated by the depth intervals over which wells in the State of California’s database of public drinking-water supply wells are open or screened. Two types of assessments were made: (1) a status assessment that described the current quality of the groundwater resource, and (2) an evaluation of relations between groundwater quality and potential explanatory factors that represent characteristics of the primary aquifer system. The assessments characterize untreated groundwater quality, rather than the quality of treated drinking water delivered to consumers by water distributors. The status assessment was based on water-quality data collected by the U.S. Geological Survey from 83 wells in the SNR study unit in 2008 and from 117 wells in 3 small study units within the SNR study unit in 2006–07 and on water-quality data compiled in the State’s database for 1,066 wells sampled in 2006–08. To provide some context for the results, water-quality data were converted to relative-concentrations (RCs), which are the sample concentrations divided by the concentrations of Federal or California regulatory and non-regulatory benchmarks for drinking-water quality. RCs for inorganic constituents (major ions, trace elements, nutrients, and radioactive constituents) were classified as “high” (RC > 1.0, indicating that concentration is above the benchmark), “moderate” (1.0 ≥ RC > 0.5), or “low” (RC ≤ 0.5). For organic constituents (volatile organic compounds and pesticides) and special-interest constituents (perchlorate and N -nitrosodimethylamine [NDMA]), the boundary between moderate and low RCs was set at 0.1. All benchmarks used for organic constituents were health-based, whereas health-based and aesthetic-based benchmarks were used for inorganic constituents. The primary metric used for quantifying regional-scale groundwater quality was “aquifer-scale proportion.” Aquifer-scale proportions were calculated as the areal percentages of the primary aquifer system having high, moderate, and low RCs for a given constituent or class of constituents. The SNR study unit area was classified into four aquifer lithologic types—granitic rocks, metamorphic rocks, sedimentary deposits, and volcanic rocks—and aquifer-scale proportions were calculated on an area-weighted basis for each of the four aquifer lithologies and for the study unit as a whole (aggregated system). The results of the status assessment indicated that inorganic constituents were present at high and moderate RCs in greater proportions in the SNR study unit aggregated primary aquifer system than were organic constituents and that there were significant differences (p < 0.05) between the four aquifer lithologies. One or more inorganic constituents with health-based benchmarks were present at high RCs in 16 percent of the aggregated primary aquifer system and at moderate RCs in 21 percent. Arsenic (9.7 percent), uranium (2.9 percent), boron (2.0 percent), fluoride (1.8 percent), and nitrate (1.4 percent) were the constituents most commonly present at high RCs. For inorganic constituents with aesthetic-based benchmarks, 18 percent of the aggregated primary aquifer system had high RCs of one or more constituent, and 6.8 percent had moderate RCs. Iron (15.8 percent), manganese (15.1 percent), and total dissolved solids (1.3 percent) were the constituents most commonly present at high RCs. Organic constituents were not detected in 72 percent of the primary aquifer system. One or more organic constituents had high RCs in 0.1 percent of the primary aquifer system, moderate RCs in 3.0 percent, and low RCs in 25 percent. Proportions of the four lithologic primary aquifer systems with high or moderate concentrations of organic constituents were not significantly different. Three organic constituents had area-weighted detection frequencies greater than 10 percent in the primary aquifer system as a whole or at least one of the four lithologic primary aquifer systems: the gasoline oxygenate methyl tert -butyl ether, the trihalomethane chloroform, and the herbicide simazine. The special-interest constituent perchlorate was detected at high RCs in 0.01 percent of the primary aquifer system and at moderate RCs in 1.0 percent, and detection frequencies could be accounted for by the distribution of perchlorate under natural conditions. Statistical tests were used to evaluate relations between constituent concentrations and potential explanatory factors descriptive of land use, geography, depth, geochemical conditions, and groundwater age. Higher concentrations of trace elements, radioactive constituents, and constituents with aesthetic-based benchmarks generally were associated with anoxic conditions, higher pH, and location within a particular compositional band in the Sierra Nevada batholith corresponding to the southwestern part of the study unit. High concentrations of organic constituents generally were associated with greater proportions of urban land use. No significant relations were observed between the concentrations of organic constituents and measures of well depth or groundwater age, perhaps because of the high proportions of springs and modern groundwater in the dataset.

Explore related subjects

Scientific Investigations Report Report

Source-reported bounding extent: 32.52828936482526° to 41.96765920367816° latitude; -124.541015625° to -114.08203125° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Miranda S. Fram, Kenneth Belitz. 2014. Status and understanding of groundwater quality in the Sierra Nevada Regional study unit, 2008: California GAMA Priority Basin Project. https://doi.org/10.3133/sir20145174

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Evaluating the number of realizations (train-test splits) necessary to ensure robust estimates of conventional hydrothermal resource favorability using Monte Carlo cross-validation, the Great Basin, Western USA

Supervised machine learning approaches used to produce favorability maps in resource assessments commonly partition an input dataset into training and testing subsets (that is, through train-test splits). However, if a single split is not representative of underlying resource conditions, the resulting favorability map may be biased, particularly with sparse or heterogeneous datasets. To mitigate the potential for unrepresentative favorability maps, recent works by U.S. Geological Survey researchers have used Monte Carlo cross-validation to implement a large number ( n) of randomized train-test splits to produce n realizations. The realizations are then aggregated using cell-wise median predictions to produce the resulting final favorability map, recognizing that the median will remove extreme values that might have been estimated from a comparatively few unrepresentative realizations. Theoretically, the median prediction at every cell converges to a single estimate as n approaches infinity, and the question addressed herein is: How many realizations are necessary to get a robust estimate (that is, an estimate unaffected by additional realizations)? Therefore, convergence metrics are described to identify the number of train-test splits and realizations needed to make a reliable map using the data and supervised machine learning workflow for conventional hydrothermal resource assessment of the Great Basin of the Western United States. For this study, robust prediction occurs with n approximately equal to 600 realizations, and smaller ensembles (for example, n is approximately equal to 200 or even 100) may be suitable during preliminary or exploratory analyses. Although the resulting threshold numbers will vary depending on the data and modeling approach used, the convergence metrics proposed and applied herein are applicable to other supervised machine learning studies that use Monte Carlo cross-validation.

Scientific Investigations Report↗

USGS2026

Groundwater budget for the Portneuf River Basin, southeastern Idaho

The U.S. Geological Survey, in cooperation with the Idaho Department of Water Resources, developed the first groundwater budget for the upper Portneuf River Basin in southeastern Idaho, a tributary of the Snake River. A groundwater budget for the Portneuf River Basin supports water resource and administrative management decisions within the basin and for downstream users of the eastern Snake River Plain aquifer. The analysis quantifies inflows, outflows, and residuals for an aquifer system defined by the Idaho Department of Water Resources under three recent precipitation conditions: an average year (2016), a dry year (2021), and a wet year (2023). The budget was calculated for the basin and for two subbasins delineated by the U.S. Geological Survey streamgage Portneuf River at Topaz, Idaho (13073000): the above Topaz subbasin, which includes the Portneuf-Gem valley, and the below Topaz subbasin, which includes Marsh Valley. Aquifer inflows include mountain-front recharge; areal recharge; recharge from applied water, including recharge from irrigation, canal seepage, and effluent returns; groundwater flow into the basin; and reservoir seepage. Outflows include groundwater pumping for agricultural, municipal, and domestic uses; subsurface outflow through the Portneuf gap; and discharge to streams as base flow. Estimated annual inflows for the full basin ranged from 116,880 acre-feet in 2021 to 154,880 acre-feet in 2023, and outflows ranged from 132,190 acre-feet in 2016 to 158,490 acre-feet in 2023. Basinwide residuals, the change in storage plus uncertainty, were −2,410 acre-feet in 2016, −18,410 acre-feet in 2021, and −3,610 acre-feet in 2023, and each subbasin had a mixture of negative and positive residuals. These basinwide results, interpreted as change in storage plus water-budget uncertainty, indicate minor net losses that increase with dry conditions, consistent with well depth-to-water measurements indicating gradual multi-decadal declines. Patterns in subbasin residuals are driven by irrigation practices and surface-water management; for example, the above Topaz subbasin relies more on groundwater for irrigation, resulting in more negative residuals during dry years. In contrast, the below Topaz subbasin depends more on surface water, producing positive residuals during dry years because of irrigation losses and canal seepage. The analyses for both subbasins indicate decades-long groundwater declines, which agree with the overall negative residuals calculated. The largest sources of uncertainty include climate inputs (precipitation and evapotranspiration) and poorly constrained components such as groundwater inflow and tributary stream infiltration. These findings provide insight into how climatic variables and irrigation practices affect groundwater inflows and outflows within the Portneuf River Basin.

Idaho↗

USGS2026

World minerals outlook—Antimony, copper, graphite, niobium, potash, silicon, silver, and tungsten through 2030

Demand for mineral commodities continues to increase owing to rapid technological advancements and global economic growth. To support this increase in demand, information about current and near-term supplies of these mineral commodities is essential. Such data help evaluate the health and stability of global supply chains and protect against potential supply risks. Current production and production capacity data coupled with information regarding near-term expected changes (such as facility closures, planned expansions, or the completion of new mineral production projects) can provide insight into expected future market developments and expected available supply of mineral commodities. This report within the “World Minerals Outlook” series analyzes data for antimony, copper, natural graphite, niobium, potash, silicon metal, silver, and tungsten—eight mineral commodities listed in the 2025 List of Critical Minerals. World production data from 2019 through 2025, as well as estimated world capacity data from 2023 through 2025 were analyzed. Using these data, near-term (2026–2030) expected world capacities were estimated. For antimony, copper, niobium, silicon metal, silver, and tungsten, modest increases in production capacity of 4 to 10 percent were expected between 2025 and 2030, whereas capacities for natural graphite and potash were expected to increase by about 18 to 20 percent.

Scientific Investigations Report↗