USGS Science⌕ Search

USGS · sir20125252

Estimates of gains and losses from unmeasured sources and sinks for streamflow and dissolved-solids load in selected reaches of the Arkansas River, southeastern Colorado, 2009-2010

Abstract

The Arkansas River is an important municipal water supply and is the primary supply for about 400,000 acres of irrigated land in southeastern Colorado. The suitability of this water for domestic, agricultural, and industrial use is affected by high salinity in parts of the Arkansas River. There is a need to quantify mass loading of dissolved solids (DS) in the Arkansas River. In 2009, the U.S. Geological Survey, in cooperation with the Arkansas River Basin Regional Resource Planning Group and the Colorado Water Conservation Board, began a study to estimate gains and losses from unmeasured sources and sinks for streamflow and DS load in selected reaches of the Arkansas River in southeastern Colorado. Two study reaches were selected for investigation—Canon City to just upstream from Pueblo Reservoir (UARB) and Avondale to Las Animas (LARB). The results from the water-budget analyses indicated that potential areas of unmeasured sources and sinks of streamflow were identifiable in the two study reaches. In the UARB, a substantial volume of water in the subreach from Ark at Canon City to the seasonal gaging station 5 miles downstream (Ark nr Canon City) was unaccounted for by the methodology used in this analysis. The daily gain from unmeasured sources in this subreach was estimated to be about 100 cubic feet per second (ft 3 /s) or about 20 ft 3 /s per river mile. Water-budget estimates for the remaining 18 miles of the UARB study reach indicated that gains or losses from unmeasured sources or sinks were within the measurement error as defined for this report. In the LARB, gains and losses from unmeasured sources and sinks were identified in some of the subreaches but the magnitude of the flux generally was small. Unmeasured sources ranging from less than 2 to 3 ft 3 /s per mile were identified in the river subreaches from Ark at Catlin Dam downstream to Ark at Swink. A streamflow loss was indicated along the subreach from Ark at Nepesta to Ark at Catlin Dam, particularly in 2010. The mechanism and spatial extent of this sink was not identified, and further investigation would be required to better quantify the loss. The results from the analyses of unmeasured sources of DS load indicated that potential source areas were identifiable in the study areas. It might be expected that unmeasured DS load flux would be identified along the same reaches where unmeasured streamflow flux was identified. To that extent, some of the observed results from the analysis of daily DS loading did mirror the streamflow results. In some subreaches of the Arkansas River, however, unmeasured sources and sinks of DS load did not appear to be directly associated with unmeasured sources and sinks of streamflow. In the UARB from Ark at Canon City to Ark nr Canon City, unmeasured gains in DS load were estimated to range from 11 to 22 tons per day per mile in 2009 and from about 8 to 13 tons per day per mile in 2010; streamflow from unmeasured sources was estimated to be about 20 ft 3 /s per mile along this same reach. Downstream from this short reach, DS load to the river from unmeasured sources was estimated to range from 5.4 to 7.6 tons per day per mile in 2010 for Ark nr Canon City to Ark at Portland and from 11 to 16 tons per day per mile in 2009 for Ark at Portland to Ark nr Portland. Unmeasured gains in streamflow were not identified in either of these subreaches. Several small tributaries with DS concentrations ranging from 3,000 mg/L to as high as 6,000 mg/L enter the river along these subreaches. These inputs may indicate a potential source of groundwater that could affect DS loading in the river. Further investigation would be needed to identify the unmeasured source or sources of DS load to determine the nature and extent of unmeasured inputs. In the LARB, gains in DS load from unmeasured sources were identified for the subreach from Ark nr Avondale to Ark at Nepesta, although no substantial amounts of streamflow from unmeasured sources were identified for this subreach. In 2009, the estimated gain in DS load from unmeasured sources for this subreach was 4.7 tons per day per mile. An increase in DS load from unmeasured sources also was identified along the subreach of the river from Ark at Catlin to Swink; the DS load from unmeasured sources was estimated to range from 10 to 28 tons per day per mile. The only loss of DS load was identified for the subreach from Nepesta to Catlin Dam in 2010. The mechanism and spatial extent of the losses were not identified, and further investigation would be required to better understand the results.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 37° to 39.5° latitude; -107° to -102° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Roderick F. Ortiz. 2013. Estimates of gains and losses from unmeasured sources and sinks for streamflow and dissolved-solids load in selected reaches of the Arkansas River, southeastern Colorado, 2009-2010. https://doi.org/10.3133/sir20125252

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Analysis of groundwater geochemistry in the Lansing, Michigan, area

Groundwater resources in the Lansing, Michigan, area are protected by a wellhead protection plan, but previous studies have indicated that groundwater in this area may be susceptible to surface contamination. The U.S. Geological Survey, in cooperation with the Lansing Board of Water & Light, analyzed geochemical and aquifer characteristics to assess the potential for contamination of groundwater resources. Recharge age categories were determined from tritium concentrations for some wells, and by using ternary diagrams and principal component analysis for other wells. These age classifications, combined with hydrogeologic and geochemical data, were analyzed by using statistical methods to identify trends that may indicate areas of increased groundwater susceptibility. Wells with modern recharge tended to have higher sodium, chloride, and chloride:bromide ratios than did wells with mixed recharge, suggesting greater surface connectivity and potential influence from anthropogenic sources such as road salt. In contrast, wells in the mixed age category exhibited more stable geochemistry and lower constituent concentrations. Classification and regression tree models identified aquifer geometry—particularly the thickness of the uppermost bedrock unit and presence of confining layers—as key predictors of recharge age and geochemical indicators. The trends identified from these analyses could help to reveal locations in the Lansing area that are among the most susceptible to contamination.

Scientific Investigations Report↗

Evaluating the number of realizations (train-test splits) necessary to ensure robust estimates of conventional hydrothermal resource favorability using Monte Carlo cross-validation, the Great Basin, Western USA

Supervised machine learning approaches used to produce favorability maps in resource assessments commonly partition an input dataset into training and testing subsets (that is, through train-test splits). However, if a single split is not representative of underlying resource conditions, the resulting favorability map may be biased, particularly with sparse or heterogeneous datasets. To mitigate the potential for unrepresentative favorability maps, recent works by U.S. Geological Survey researchers have used Monte Carlo cross-validation to implement a large number ( n) of randomized train-test splits to produce n realizations. The realizations are then aggregated using cell-wise median predictions to produce the resulting final favorability map, recognizing that the median will remove extreme values that might have been estimated from a comparatively few unrepresentative realizations. Theoretically, the median prediction at every cell converges to a single estimate as n approaches infinity, and the question addressed herein is: How many realizations are necessary to get a robust estimate (that is, an estimate unaffected by additional realizations)? Therefore, convergence metrics are described to identify the number of train-test splits and realizations needed to make a reliable map using the data and supervised machine learning workflow for conventional hydrothermal resource assessment of the Great Basin of the Western United States. For this study, robust prediction occurs with n approximately equal to 600 realizations, and smaller ensembles (for example, n is approximately equal to 200 or even 100) may be suitable during preliminary or exploratory analyses. Although the resulting threshold numbers will vary depending on the data and modeling approach used, the convergence metrics proposed and applied herein are applicable to other supervised machine learning studies that use Monte Carlo cross-validation.

California, Idaho, Nevada, Oregon, Utah↗

Groundwater budget for the Portneuf River Basin, southeastern Idaho

The U.S. Geological Survey, in cooperation with the Idaho Department of Water Resources, developed the first groundwater budget for the upper Portneuf River Basin in southeastern Idaho, a tributary of the Snake River. A groundwater budget for the Portneuf River Basin supports water resource and administrative management decisions within the basin and for downstream users of the eastern Snake River Plain aquifer. The analysis quantifies inflows, outflows, and residuals for an aquifer system defined by the Idaho Department of Water Resources under three recent precipitation conditions: an average year (2016), a dry year (2021), and a wet year (2023). The budget was calculated for the basin and for two subbasins delineated by the U.S. Geological Survey streamgage Portneuf River at Topaz, Idaho (13073000): the above Topaz subbasin, which includes the Portneuf-Gem valley, and the below Topaz subbasin, which includes Marsh Valley. Aquifer inflows include mountain-front recharge; areal recharge; recharge from applied water, including recharge from irrigation, canal seepage, and effluent returns; groundwater flow into the basin; and reservoir seepage. Outflows include groundwater pumping for agricultural, municipal, and domestic uses; subsurface outflow through the Portneuf gap; and discharge to streams as base flow. Estimated annual inflows for the full basin ranged from 116,880 acre-feet in 2021 to 154,880 acre-feet in 2023, and outflows ranged from 132,190 acre-feet in 2016 to 158,490 acre-feet in 2023. Basinwide residuals, the change in storage plus uncertainty, were −2,410 acre-feet in 2016, −18,410 acre-feet in 2021, and −3,610 acre-feet in 2023, and each subbasin had a mixture of negative and positive residuals. These basinwide results, interpreted as change in storage plus water-budget uncertainty, indicate minor net losses that increase with dry conditions, consistent with well depth-to-water measurements indicating gradual multi-decadal declines. Patterns in subbasin residuals are driven by irrigation practices and surface-water management; for example, the above Topaz subbasin relies more on groundwater for irrigation, resulting in more negative residuals during dry years. In contrast, the below Topaz subbasin depends more on surface water, producing positive residuals during dry years because of irrigation losses and canal seepage. The analyses for both subbasins indicate decades-long groundwater declines, which agree with the overall negative residuals calculated. The largest sources of uncertainty include climate inputs (precipitation and evapotranspiration) and poorly constrained components such as groundwater inflow and tributary stream infiltration. These findings provide insight into how climatic variables and irrigation practices affect groundwater inflows and outflows within the Portneuf River Basin.

Idaho↗