USGS Science⌕ Search

USGS · sir20105070G

Descriptive and geoenvironmental model for Co-Cu-Au deposits in metasedimentary rocks

Abstract

Introduction This report is a revised model for a specific type of cobalt-copper-gold (Co-Cu-Au) deposit that will be evaluated in the next U.S. Geological Survey (USGS) assessment of undiscovered mineral resources in the United States (see Ferrero and others, 2012). Emphasis is on providing an up-to-date deposit model that includes both geologic and geoenvironmental aspects. The new model presented here supersedes previous USGS models by Earhart (1986) and Evans and others (1995), which are based solely on deposits in the Blackbird mining district of central Idaho. This report is a broader synthesis of information on 19 Co-Cu-Au deposits occurring in predominantly metasedimentary successions worldwide (table 1–1) that generally share common geologic, mineralogical, and geochemical features; preliminary summary versions were presented in Slack and others (2010) and Slack and others (2011), which are superseded by this report. As defined herein, the individual Co-Cu-Au deposits are located more than 500 meters from similar deposits and contain 0.1 percent or more by weight of Co in ore or mineralized rock; some deposits included in the database lack reported average Co grades, but they contain high Co concentrations, at least locally. Most of the deposits also have high As contents, present in Co arsenide and sulfarsenide minerals. Type examples of the Co-Cu-Au deposits are those in the Blackbird district, Skuterud in Norway, and Kouvervarra and Juomasuo in Finland. Some deposits in the database have low grades for Cu (for example, NICO in Canada) or Au (for example, Lemmonlampi in Finland), but these deposits are included because their geological, mineralogical, and alteration features are similar to those of the type examples. Several deposits included in the model are partly hosted by metavolcanic or metaigneous rocks (including granite), but regionally these deposits are within metasedimentary successions; no deposits are wholly within granite or other plutonic igneous intrusions. Despite having a lower average Co grade, the Mt. Cobalt deposit in Australia is included here because it has past Co production from higher-grade ore zones (Nisbet and others, 1983). The Black Pine deposit in the Idaho cobalt belt is included because it contains mineable Co- and Au-rich lenses within Cu-rich mineralized zones (Formation Metals, Inc., 2012). Six deposits that lack data for average Co grades are also included because each reportedly contains abundant Co (>0.1 weight percent Co), at least locally. Many of the deposits are noteworthy as possible resources of Ag, Bi, W, Ni, Y, REE, and (or) U. Detailed data on the deposits listed in table 1–1, including references, are available in appendix 1. Significantly, the grouping in this report of Co-Cu-Au deposits in metasedimentary rocks into a single model includes deposits that other workers have previously classified in different ways. For background information, a global overview of different types of Co deposits worldwide is given in Smith (2001). Additional geologically and compositionally similar deposits are known, but have average Co grades less than 0.1 percent. Most of these deposits contain cobalt-rich pyrite and lack appreciable amounts of distinct Co sulfide and (or) sulfarsenide minerals. Such deposits are not discussed in detail in the following sections, but these deposits may be relevant to the descriptive and genetic models presented below. Examples include the Scadding Au-Co-Cu deposit in Ontario, Canada; the Vähäjoki Co-Cu-Au deposit in Finland; the Tuolugou Co-Au deposit in Qinghai Province, China; the Lala Co-Cu-UREE deposit in Sichuan Province, China; the Guelb Moghrein Cu-Au-Co deposit in Mauritania; and the Great Australia Co-Cu, Greenmount Cu-Au-Co, and Monakoff Cu-Au-Co-UAg deposits in Queensland, Australia. Detailed information on these deposits is presented in appendix 2.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

John F. Slack, Craig A. Johnson, J. Douglas Causey, Karen Lund, Klaus J. Schulz, John E. Gray, Robert G. Eppinger. 2013. Descriptive and geoenvironmental model for Co-Cu-Au deposits in metasedimentary rocks. https://doi.org/10.3133/sir20105070g

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Baseline water-quality inventory and summary for the Paterson Great Falls National Historical Park, New Jersey

The Paterson Great Falls National Historical Park (PAGR), established in 2011 in the City of Paterson, New Jersey, contains many cultural, historical, and natural resources. Because of the PAGR’s young age and limited resources, a long record of natural resource data is not available for use to guide future park management and planning decisions. A detailed natural resource inventory was identified as an immediate need in the “Foundation Document—Paterson Great Falls National Historical Park,” given the history of extensive industrial activity throughout the PAGR and the Passaic River Basin. The U.S. Geological Survey, in cooperation with the National Park Service and the Urban Waters Federal Partnership for the Lower Passaic River, inventoried water-quality monitoring efforts and compiled historical water-quality data from secondary data sources to define baseline conditions in the PAGR and the surrounding study area. This report documents the methods used to harmonize water-quality data aggregated from multiple sources for the PAGR study area. Procedures implemented during data harmonization include compiling data from multiple sources, assessing the dataset for completeness, addressing metadata concerns, and creating a consistent and quality-assured dataset for future analysis. The harmonized dataset contains 14 aggregated surface-water sites, 1,103 individual sampling days, and 32,000 water-quality records throughout the period of record defined for this study (1952–2021). Summary statistics and comparison to water-quality criteria are provided for focus parameters that can support PAGR management, including field properties, suspended material, total dissolved solids, specific conductance, chloride, sulfate, Escherichia coli, nutrients, contaminants of concern related to fish consumption advisories, and litter and floatable debris. A spatial data gap was identified for the recreational area near the base of the Great Falls and immediately downstream from a known combined sewer overflow discharge location. Analytic data gaps were identified for continuous streamflow and water-quality parameters, floatable debris characterization, and harmful algal blooms identification. Continuous collection of contaminants of concern was identified as a temporal data gap, as these parameters were not consistently collected within the study area. The water-quality data synthesis and summary presented in this report can assist PAGR staff in understanding the complex baseline water resources within the study area and can serve as a baseline to design future water-quality monitoring efforts and evaluate changes in water quality over time. The harmonized dataset, as well as future New Jersey Department of Environmental Protection and New Jersey Harbor Discharge Group monitoring data and assessments, can also be used to examine the status and trends in surface-water quality, support compliance with the Clean Water Act (33 U.S.C. 1251 et seq.), and further investigate changes to park water resources that can affect ecological and human health.

New Jersey↗

Slip tendency and dilation tendency of Quaternary faults in the Great Basin region, Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming

This report presents the results of slip tendency and dilation tendency analysis of Quaternary faults in the Great Basin region, in the states of Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming. This effort was undertaken as part of two studies: the U.S. Department of Energy Geothermal Technologies Office-funded Innovative Geothermal Exploration through Novel Investigations of Undiscovered Systems (INGENIOUS) project, which is a multidisciplinary, multi-institution effort to develop new methodologies and best practices to accelerate the discovery of new, commercially viable hydrothermal resources; and the U.S. Geological Survey Geothermal Resources Investigations Project. The goal of this work is to identify faults and fault segments that are appropriately oriented to be stress-loaded for slip or to dilate under the ambient stress conditions. Both conditions may make such faults more likely to host permeability and fluid flow relative to other faults in the region. Slip tendency and dilation tendency were calculated for all fault segments in the study area from the U.S. Geological Survey Quaternary Fault and Fold Database. Results demonstrate that faults with high slip tendency and dilation tendency are common in the Great Basin region. The areas containing many high slip tendency and dilation tendency fault segments are associated with high strain rates. These areas also host a relatively high proportion of the known hydrothermal systems. This indicates that faults with high slip tendency and dilation tendency in areas with high strain-rate are potentially most prospective for hosting hydrothermal systems. The database published in coordination with this report contains the slip tendency and dilation tendency results data, including the fault geometry and stress data used to calculate these quantities, for both the Great Basin study area and the smaller INGENIOUS study area.

Arizona, California, Idaho, Nevada, Oregon, Utah, ↗

A spatial analysis of the groundwater emergence flood hazard in Long Island, New York, and coastal areas surrounding Long Island Sound in New York, Connecticut, and Rhode Island

Long Island, New York, and nearby coastal areas surrounding Long Island Sound are densely populated and, like other coastal areas, are susceptible to flooding from several potential sources, including stormwater from precipitation events, tidal flooding and storm surge, and groundwater emergence flooding. Groundwater emergence fooding refers to the intersection of a rising water table with land surface or critical infrastructure. Many studies of flood drivers either neglect or only briefly discuss how shallow groundwater conditions may contribute to or exacerbate flood conditions. As a part of a comprehensive study of compound flood hazards in the coastal areas of Long Island and Long Island Sound, a spatial analysis was completed by the U.S. Geological Survey, in cooperation with the Environmental Protection Agency’s Long Island Sound Partnership, formerly called the Long Island Sound Study, using available regional datasets to characterize the potential hazard for groundwater emergence flooding. The approximately 3,100 square mile study area was subdivided into 11,407 grid cells that were 900 meters by 900 meters (approximately 3,000 feet by 3,000 feet), for the purpose of integrating the spatial datasets to calculate and map the groundwater emergence flood hazard. The depth to the water table, hydrologic soil groups, and National Land Cover Database were harmonized to the common grid. A groundwater emergence flood hazard score was calculated for each grid cell for current average conditions following a set of rules accounting for the depth to the water table and the percentage of area within each cell with slow infiltrating soils. A scenario with a higher sea-level position was also calculated for the Long Island part of the study area. The calculated groundwater emergence flood hazard score was reviewed in conjunction with the National Land Cover Database to identify developed areas and associated infrastructure that may be at risk of potential groundwater emergence flooding. Study results indicate that the groundwater emergence flood hazard is highest in coastal areas and near surface water where the water table is close to ground surface. Inland areas away from surface waterbodies are not likely to be exposed to groundwater emergence flooding. For Long Island, in the scenario with higher sea-level position, a greater groundwater emergence flood hazard is calculated for some locations closer to the coast and where land is submerged. Away from the coast and surface-water drainage, the groundwater emergence flood hazard is similar between the current average sea-level condition and the higher sea-level position scenario.

Connecticut, New York, Rhode Island↗