USGS Science⌕ Search

USGS · sir20055080

Estimating the magnitude and frequency of floods for streams in west-central Florida, 2001

Abstract

Flood discharges were estimated for recurrence intervals of 2, 5, 10, 25, 50, 100, 200, and 500 years for 94 streamflow stations in west-central Florida. Most of the stations are located within the 10,000 square-mile, 16-county area that forms the Southwest Florida Water Management District. All stations had at least 10 years of homogeneous record, and none have flood discharges that are significantly affected by regulation or urbanization. Guidelines established by the U.S. Water Resources Council in Bulletin 17B were used to estimate flood discharges from gaging station records. Multiple linear regression analysis was then used to mathematically relate estimates of flood discharge for selected recurrence intervals to explanatory basin characteristics. Contributing drainage area, channel slope, and the percent of total drainage area covered by lakes (percent lake area) were the basin characteristics that provided the best regression estimates. The study area was subdivided into four geographic regions to further refine the regression equations. Region 1 at the northern end of the study area includes large rivers that are characteristic of the rolling karst terrain of northern Florida. Only a small part of Region 1 lies within the boundaries of the Southwest Florida Water Management District. Contributing drainage area and percent lake area were the most statistically significant basin characteristics in Region 1; the prediction error of the regression equations varied with the recurrence interval and ranged from 57 to 69 percent. In the three other regions of the study area, contributing drainage area, channel slope, and percent lake area were the most statistically significant basin characteristics, and are the three characteristics that can be used to best estimate the magnitude and frequency of floods on most streams within the Southwest Florida Water Management District. The Withlacoochee River Basin dominates Region 2; the prediction error of the regression models in the region ranged from 65 to 68 percent. The basins that drain into the northern part of Tampa Bay and the upper reaches of the Peace River Basin are in Region 3, which had prediction errors ranging from 54 to 74 percent. Region 4, at the southern end of the study area, had prediction errors that ranged from 40 to 56 percent. Estimates of flood discharge become more accurate as longer periods of record are used for analyses; results of this study should be used in lieu of results from earlier U.S. Geological Survey studies of flood magnitude and frequency in west-central Florida. A comparison of current results with earlier studies indicates that use of a longer period of record with additional high-water events produces substantially higher flood-discharge estimates for many gaging stations. Another comparison indicates that the use of a computed, generalized skew in a previous study in 1979 tended to overestimate flood discharges.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kathleen M. Hammett, Michael J. DelCharco. 2005. Estimating the magnitude and frequency of floods for streams in west-central Florida, 2001. https://doi.org/10.3133/sir20055080

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Karst hydrologic processes in carbonate fensters of the western Great Smoky Mountains, Tennessee, 2017–18

The geology of the Great Smoky Mountains in Tennessee and North Carolina is dominated by metamorphic strata. Along the western extent of the range, however, several carbonate fensters expose the Ordovician Jonesboro Limestone along the western edge of the Great Smoky Fault. The fensters (Cades Cove, Tuckaleechee Cove, and Wear Cove) create opportunities for allogenic recharge at the contact between the surrounding, relatively insoluble, strata and the underlying soluble formations, resulting in the development of karst systems. Karst environments have a high degree of connectivity between surface streams and groundwater systems; thus, karst aquifers are inherently vulnerable to contamination from surface activities. Karst environments also provide a specific environment for sensitive biota. Protection of the unique resources of karst environments requires an understanding of the behavior of karst aquifers, knowledge of karst recharge areas, and the mapping of groundwater flow paths. A study began in 2017 to characterize the hydrologic behavior of the karst systems in Great Smoky Mountains National Park through hydrologic monitoring, dye tracing, and seepage investigations. Hydrologic monitoring equipment was installed at several karst hydrogeologic features: two in-cave sites, two major springs, Abrams Creek in Cades Cove, and a karst depression wetland. Dye tracing was conducted to determine resurgences for the cave systems, to delineate spring recharge areas, and to estimate karst groundwater velocities. Seepage investigations along Abrams Creek helped determine if streams were sinking into the Jonesboro Limestone, either at the contact with insoluble strata or as streams flowed across the carbonate fenster. Study results indicate considerable differences in groundwater behavior between the conduit-dominated flow systems in Tuckaleechee Cove compared to the lower-gradient, colluvium-covered karst systems in Cades Cove. Study results also indicate that contaminants in the area of Bull sink and Whiteoak Sink could be rapidly transported through karst groundwater towards springs in Tuckaleechee Cove. Karst resources in Cades Cove are most likely to be affected by local events or activities taking place within the cove itself or in upper Abrams Creek upstream of the Great Smoky Fault. This study provides information on the vulnerability and uniqueness of the karst systems in the western Great Smoky Mountains, which are characterized by complex geology, high-gradient subterranean streams, deep caves, and carbonate fensters.

Tennessee↗

Analysis of groundwater geochemistry in the Lansing, Michigan, area

Groundwater resources in the Lansing, Michigan, area are protected by a wellhead protection plan, but previous studies have indicated that groundwater in this area may be susceptible to surface contamination. The U.S. Geological Survey, in cooperation with the Lansing Board of Water & Light, analyzed geochemical and aquifer characteristics to assess the potential for contamination of groundwater resources. Recharge age categories were determined from tritium concentrations for some wells, and by using ternary diagrams and principal component analysis for other wells. These age classifications, combined with hydrogeologic and geochemical data, were analyzed by using statistical methods to identify trends that may indicate areas of increased groundwater susceptibility. Wells with modern recharge tended to have higher sodium, chloride, and chloride:bromide ratios than did wells with mixed recharge, suggesting greater surface connectivity and potential influence from anthropogenic sources such as road salt. In contrast, wells in the mixed age category exhibited more stable geochemistry and lower constituent concentrations. Classification and regression tree models identified aquifer geometry—particularly the thickness of the uppermost bedrock unit and presence of confining layers—as key predictors of recharge age and geochemical indicators. The trends identified from these analyses could help to reveal locations in the Lansing area that are among the most susceptible to contamination.

Michigan↗

Evaluating the number of realizations (train-test splits) necessary to ensure robust estimates of conventional hydrothermal resource favorability using Monte Carlo cross-validation, the Great Basin, Western USA

Supervised machine learning approaches used to produce favorability maps in resource assessments commonly partition an input dataset into training and testing subsets (that is, through train-test splits). However, if a single split is not representative of underlying resource conditions, the resulting favorability map may be biased, particularly with sparse or heterogeneous datasets. To mitigate the potential for unrepresentative favorability maps, recent works by U.S. Geological Survey researchers have used Monte Carlo cross-validation to implement a large number ( n) of randomized train-test splits to produce n realizations. The realizations are then aggregated using cell-wise median predictions to produce the resulting final favorability map, recognizing that the median will remove extreme values that might have been estimated from a comparatively few unrepresentative realizations. Theoretically, the median prediction at every cell converges to a single estimate as n approaches infinity, and the question addressed herein is: How many realizations are necessary to get a robust estimate (that is, an estimate unaffected by additional realizations)? Therefore, convergence metrics are described to identify the number of train-test splits and realizations needed to make a reliable map using the data and supervised machine learning workflow for conventional hydrothermal resource assessment of the Great Basin of the Western United States. For this study, robust prediction occurs with n approximately equal to 600 realizations, and smaller ensembles (for example, n is approximately equal to 200 or even 100) may be suitable during preliminary or exploratory analyses. Although the resulting threshold numbers will vary depending on the data and modeling approach used, the convergence metrics proposed and applied herein are applicable to other supervised machine learning studies that use Monte Carlo cross-validation.

California, Idaho, Nevada, Oregon, Utah↗