USGS Science⌕ Search
Home/Archive/USGS

USGS · sir20045212

Withdrawals, water levels, and specific conductance in the Chicot aquifer system in southwestern Louisiana, 2000-03

John K. Lovelace·Jared W. Fontenot·C. Paul Frederick
View original source ↗Read source document ↗Export metadata ↓

Abstract

The Chicot aquifer system is the principal source of fresh ground-water supplies in southwestern Louisiana. Much of the area is rural and rice cultivation is the primary agricultural activity. About 540 million gallons per day were withdrawn from the aquifer system in southwestern Louisiana in 2000. Potentiometric-surface maps of the aquifer system were created for June 2002 and January 2003 to determine where water-level declines occur due to seasonal ground-water withdrawals. During June 2002, water levels in the aquifer system were more than 40 feet below the National Geodetic Vertical Datum of 1929 (NGVD 29) in parts of Acadia, Calcasieu, Evangeline, and Jefferson Davis Parishes, in an area that generally coincides with rice-farming areas. During January 2003, water levels were more than 30 feet below NGVD 29 in these areas. From June 2002 to January 2003, water levels generally recovered between 5 and 20 feet in the Chicot aquifer system in most of Acadia and Jefferson Davis Parishes, southeastern Calcasieu Parish, and southern Evangeline Parish, in an area that generally coincides with rice-farming areas. These water-level changes are representative of the areal extent and magnitude of typical seasonal water-level fluctuations that occur in the aquifer system in response to seasonal ground-water withdrawals for rice irrigation. The presence of saltwater has been documented in the Chicot aquifer system beneath coastal parishes and in some areas where the aquifer system merges with the stratigraphically adjacent Atchafalaya aquifer. Data collected during the period 1943 to 2003 from 1,355 wells screened in the massive, upper, and "200-foot" sands of the Chicot aquifer system and the Atchafalaya aquifer were used to delineate areas having similar specific conductance values and determine areas where wells are affected by saltwater. Near the outcrop area, specific conductance values in the Chicot aquifer system generally are less than 150 µS/cm (microsiemens per centimeter at 25 degrees Celsius). Specific conductance values increase south and east of the outcrop area. Specific conductance values generally range from 151 to 500 µS/cm in rice-farming areas of northwestern Acadia Parish, southeastern Allen Parish, western Evangeline Parish, and northern and central Jefferson Davis Parish. Specific conductance values generally range from 501 to 1,000 µS/cm in most of the remaining rice-farming areas. Specific conductance values often exceed 1,000 µS/cm in an area along the border between Calcasieu and Jefferson Davis Parishes near Iowa, Louisiana, parts of northeastern Cameron Parish, an area of northwestern and central St. Landry Parish; parts of Vermilion Parish, and several areas along the eastern boundary of the study area where the Chicot aquifer system merges with the Atchafalaya aquifer. The maximum specific conductance value, 12,100 µS/cm, is from a well in Cameron Parish. During 2000-03, specific conductance was measured in 521 water samples from 166 wells screened in the Chicot aquifer system or the Atchafalaya aquifer. Specific conductance values exceeded 1,000 µS/cm in water samples from wells in Calcasieu, Cameron, Jefferson Davis, St. Landry, St. Martin, St. Mary, and Vermilion Parishes. Specific conductance values exceeded 2,000 µS/cm in only two wells—an irrigation well located about 2 miles south of Iowa and a USGS observation well used to monitor saltwater encroachment in east-central Vermilion Parish. Specific conductance values increased steadily at one well, from 1,090 µS/cm in April 2000 to 2,860 µS/cm in April 2003. Nearby wells did not show similar increases. Specific conductance was measured hourly during pumping at two irrigation wells between 2000 and 2003. Specific conductance values were greater than 1,000 µS/cm in both wells, indicating the presence of saltwater near the wells. Specific conductance values generally fluctuated about 150 µS/cm at both wells, but no long-term trends in the specific conductance were evident in either well.

Explore related subjects

Scientific Investigations ReportReport
90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 29.454033152035947° to 31.364726416221927° latitude; -93.95525545312833° to -91.44345652645958° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

John K. Lovelace, Jared W. Fontenot, C. Paul Frederick. 2004. Withdrawals, water levels, and specific conductance in the Chicot aquifer system in southwestern Louisiana, 2000-03. https://doi.org/10.3133/sir20045212

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Evaluating the number of realizations (train-test splits) necessary to ensure robust estimates of conventional hydrothermal resource favorability using Monte Carlo cross-validation, the Great Basin, Western USA

Supervised machine learning approaches used to produce favorability maps in resource assessments commonly partition an input dataset into training and testing subsets (that is, through train-test splits). However, if a single split is not representative of underlying resource conditions, the resulting favorability map may be biased, particularly with sparse or heterogeneous datasets. To mitigate the potential for unrepresentative favorability maps, recent works by U.S. Geological Survey researchers have used Monte Carlo cross-validation to implement a large number ( n) of randomized train-test splits to produce n realizations. The realizations are then aggregated using cell-wise median predictions to produce the resulting final favorability map, recognizing that the median will remove extreme values that might have been estimated from a comparatively few unrepresentative realizations. Theoretically, the median prediction at every cell converges to a single estimate as n approaches infinity, and the question addressed herein is: How many realizations are necessary to get a robust estimate (that is, an estimate unaffected by additional realizations)? Therefore, convergence metrics are described to identify the number of train-test splits and realizations needed to make a reliable map using the data and supervised machine learning workflow for conventional hydrothermal resource assessment of the Great Basin of the Western United States. For this study, robust prediction occurs with n approximately equal to 600 realizations, and smaller ensembles (for example, n is approximately equal to 200 or even 100) may be suitable during preliminary or exploratory analyses. Although the resulting threshold numbers will vary depending on the data and modeling approach used, the convergence metrics proposed and applied herein are applicable to other supervised machine learning studies that use Monte Carlo cross-validation.

Scientific Investigations Report↗
USGS2026

Groundwater budget for the Portneuf River Basin, southeastern Idaho

The U.S. Geological Survey, in cooperation with the Idaho Department of Water Resources, developed the first groundwater budget for the upper Portneuf River Basin in southeastern Idaho, a tributary of the Snake River. A groundwater budget for the Portneuf River Basin supports water resource and administrative management decisions within the basin and for downstream users of the eastern Snake River Plain aquifer. The analysis quantifies inflows, outflows, and residuals for an aquifer system defined by the Idaho Department of Water Resources under three recent precipitation conditions: an average year (2016), a dry year (2021), and a wet year (2023). The budget was calculated for the basin and for two subbasins delineated by the U.S. Geological Survey streamgage Portneuf River at Topaz, Idaho (13073000): the above Topaz subbasin, which includes the Portneuf-Gem valley, and the below Topaz subbasin, which includes Marsh Valley. Aquifer inflows include mountain-front recharge; areal recharge; recharge from applied water, including recharge from irrigation, canal seepage, and effluent returns; groundwater flow into the basin; and reservoir seepage. Outflows include groundwater pumping for agricultural, municipal, and domestic uses; subsurface outflow through the Portneuf gap; and discharge to streams as base flow. Estimated annual inflows for the full basin ranged from 116,880 acre-feet in 2021 to 154,880 acre-feet in 2023, and outflows ranged from 132,190 acre-feet in 2016 to 158,490 acre-feet in 2023. Basinwide residuals, the change in storage plus uncertainty, were −2,410 acre-feet in 2016, −18,410 acre-feet in 2021, and −3,610 acre-feet in 2023, and each subbasin had a mixture of negative and positive residuals. These basinwide results, interpreted as change in storage plus water-budget uncertainty, indicate minor net losses that increase with dry conditions, consistent with well depth-to-water measurements indicating gradual multi-decadal declines. Patterns in subbasin residuals are driven by irrigation practices and surface-water management; for example, the above Topaz subbasin relies more on groundwater for irrigation, resulting in more negative residuals during dry years. In contrast, the below Topaz subbasin depends more on surface water, producing positive residuals during dry years because of irrigation losses and canal seepage. The analyses for both subbasins indicate decades-long groundwater declines, which agree with the overall negative residuals calculated. The largest sources of uncertainty include climate inputs (precipitation and evapotranspiration) and poorly constrained components such as groundwater inflow and tributary stream infiltration. These findings provide insight into how climatic variables and irrigation practices affect groundwater inflows and outflows within the Portneuf River Basin.

Idaho↗
USGS2026

World minerals outlook—Antimony, copper, graphite, niobium, potash, silicon, silver, and tungsten through 2030

Demand for mineral commodities continues to increase owing to rapid technological advancements and global economic growth. To support this increase in demand, information about current and near-term supplies of these mineral commodities is essential. Such data help evaluate the health and stability of global supply chains and protect against potential supply risks. Current production and production capacity data coupled with information regarding near-term expected changes (such as facility closures, planned expansions, or the completion of new mineral production projects) can provide insight into expected future market developments and expected available supply of mineral commodities. This report within the “World Minerals Outlook” series analyzes data for antimony, copper, natural graphite, niobium, potash, silicon metal, silver, and tungsten—eight mineral commodities listed in the 2025 List of Critical Minerals. World production data from 2019 through 2025, as well as estimated world capacity data from 2023 through 2025 were analyzed. Using these data, near-term (2026–2030) expected world capacities were estimated. For antimony, copper, niobium, silicon metal, silver, and tungsten, modest increases in production capacity of 4 to 10 percent were expected between 2025 and 2030, whereas capacities for natural graphite and potash were expected to increase by about 18 to 20 percent.

Scientific Investigations Report↗