USGS Science⌕ Search
Home/Archive/USGS

USGS · sim2914

Geohydrology of the Valley-Fill Aquifers between the Village of Greene, Chenango County and Chenango Valley State Park, Broome County, New York

Kari K. Hetcher-Aguila·Todd S. Miller
View original source ↗Export metadata ↓

Abstract

This set of maps and geohydrologic sections depict the geology and hydrology of valley-fill aquifers in the 14-mile reach of the Chenango River valley between the Village of Greene and the area south of Chenango Valley State Park, N.Y. This map report depicts the aquifers; locations of domestic, production, and test wells; surficial geology; water-table altitude; potentiometric-surface altitude; generalized saturated thickness of the unconfined (water-table) aquifer; generalized thickness of the confined aquifer; and includes three geohydrologic sections. The valley fill in the Chenango River valley consists primarily of (1) glaciofluvial deposits comprised of stratified coarse-grained sediment (sand and gravel) that were deposited by meltwater streams flowing on, below, and in front of the glacier; (2) lacustrine sediments consisting of stratified fine-grained sediment (very fine sand, silt, and clay) that were deposited in proglacial lakes that formed at the front of a glacier; and (3) recent alluvium consisting of alluvial fan deposits (sand, silt, and gravel), floodplain sediments (fine-to-medium sand and silt), and channel deposits (sand and gravel). The Chenango River valley contains an unconfined valley-fill aquifer throughout much of the study area, and a confined valley-fill aquifer in the area between the northern edge of the Chenango Valley State Park and the Village of Greene. The unconfined aquifer consists predominantly of alluvial and outwash sand and gravel. The water table was mapped using water-level measurements obtained from wells completed in the unconfined aquifer, and from altitudes of lakes, ponds, and streams as indicated on U.S. Geological Survey 1:24,000-scale topographic maps. The depth to the water table typically ranges from 5 to 15 feet below land surface, but can locally be as much as 100 feet, such as in the ice-contact deposits in the Chenango Valley State Park. The confined aquifer is widely used by people living and working in the Chenango River valley. The confined aquifer consists of ice-contact sand and gravel, typically overlies bedrock, and underlies a confining unit consisting of lacustrine fine sand, silt, and clay. The confining unit is typically more than 100 feet thick in the central parts of the valley between Greene Landing Field and along the northern edge of the Chenango Valley State Park. The thickness of the confined aquifer is more than 40 feet near the Greene Landing Field.

Explore related subjects

Scientific Investigations MapReport

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kari K. Hetcher-Aguila, Todd S. Miller. 2005. Geohydrology of the Valley-Fill Aquifers between the Village of Greene, Chenango County and Chenango Valley State Park, Broome County, New York. https://doi.org/10.3133/sim2914

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2024

Potentiometric-surface and depth-to-water maps for spring 2024 were created for the Mississippi River Valley alluvial aquifer using groundwater-altitude data from 1,151 wells completed in the Mississippi River Valley alluvial aquifer and from the altitude of the top of the water surface in area rivers from 160 U.S. Geological Survey and U.S. Army Corps of Engineers streamgages. The potentiometric-surface and depth-to-water maps for 2024 were created to support investigations to characterize the Mississippi River Valley alluvial aquifer as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the Mississippi River Valley alluvial aquifer for spring 2024 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 330 feet (ft) above the North American Vertical Datum of 1988. The regional direction of the groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient direction was into the depression, and near rivers, where the groundwater gradient direction was either from the aquifer to the river or from the river into the aquifer. Groundwater depressions in the potentiometric-surface map are in the lower one-half of the Cache region and in most of the Grand Prairie and Delta regions. Depth to water by well in the Mississippi River Valley alluvial aquifer in spring 2024 ranged from 0.27 ft above land surface to 145.65 ft below land surface.

Arkansas, Illinois, Kentucky, Louisiana, Mississip↗
USGS2026

Color-Shaded Relief Bathymetry of Lake Chelan, Washington

In 2023, the U.S. Geological Survey (USGS) completed a 3-week field operation in Lake Chelan, Washington, the third deepest lake in the conterminous United States, to acquire sediment cores, high-resolution bathymetry data, and chirp sub-bottom profiles. The high-resolution bathymetry displayed in this map publication was collected using a Norbit Winghead i67-curved array multibeam system; raw data were cleaned and gridded (3 by 3 meters [m]) in the Teledyne CARIS software. In some locations where the slopes of Lake Chelan are near-vertical, multibeam returns were sparse, resulting in artifacts resembling holes that appear as grey dots within the color-shaded bathymetric relief. Although the 2023 bathymetric mapping of Lake Chelan resulted in similar morphometric characteristics to previous hydrographic campaigns (table 1; Kendra and Singleton, 1987; Pelletier and others, 1989), these new data provide a much more detailed understanding of the two physiographic basins that comprise Lake Chelan: the deeper (as deep as 445.8 m [fig. 1]; previously reported as 453 m) and narrower (1–2 kilometers [km] wide) Lucerne Basin to the north, and the shallower (as deep as 127.8 m [fig. 1]), and wider (2–3 km wide) Wapato Basin to the south. With this detailed imaging of Lake Chelan, we find pervasive morphological evidence of slope failure and mass-transport deposits (MTDs) in at least 89 locations within the lake and 63 subaqueous deltas (fig. 2). The deeper Lucerne Basin is dominated by steep slopes and numerous subaqueous deltas fed by steep fluvial catchments, whereas the Wapato Basin contains numerous landslide scarps, scars, and debris aprons along the more gently sloping lake margins, and abundant relict kettle structures from the Pleistocene deglaciation. Lake Chelan’s geomorphic, geophysical, and sediment data contain important records of glacial retreat and advance, regional volcanic eruptions, and earthquakes that generate ground motions severe enough to induce landslides recorded in the sediment as MTDs. The epicenter of the 1872 Washington State Earthquake (M 6.5–7.2; Bakun and others, 2002; Brocher and others, 2017; Sherrod and others, 2021) is along the Spencer Canyon Fault, near the southern end of Lake Chelan. Shaking from this earthquake was strong enough to affect local aquifers, induce liquefaction of unconsolidated sediments, produce large seiches (Brocher and others, 2018), and likely cause landslides within Lake Chelan.

Washington↗