USGS ScienceSearch

USGS · pp1737B

Hydrogeologic settings and groundwater-flow simulations for regional investigations of the transport of anthropogenic and natural contaminants to public-supply wells—Investigations begun in 2004

Abstract

A study of the Transport of Anthropogenic and Natural Contaminants to public-supply wells (TANC study) was begun in 2001 as part of the U.S. Geological Survey National Water-Quality Assessment (NAWQA) Program. The study was designed to shed light on factors that affect the vulnerability of groundwater and, more specifically, water from public-supply wells to contamination to provide a context for the NAWQA Program's earlier finding of mixtures of contaminants at low concentrations in groundwater near the water table in urban areas across the Nation. The TANC study has included investigations at both the regional (tens to thousands of square kilometers) and local (generally less than 25 square kilometers) scales. At the regional scale, the approach to investigation involves refining conceptual models of groundwater flow in hydrologically distinct settings and then constructing or updating a groundwater-flow model with particle tracking for each setting to help quantify regional water budgets, public-supply well contributing areas (areas contributing recharge to wells and zones of contribution for wells), and traveltimes from recharge areas to selected wells. A great deal of information about each contributing area is captured from the model output, including values for 170 variables that describe physical and (or) geochemical characteristics of the contributing areas. The information is subsequently stored in a relational database. Retrospective water-quality data from monitoring, domestic, and many of the public-supply wells, as well as data from newly collected samples at selected public-supply wells, also are stored in the database and are used with the model output to help discern the more important factors affecting vulnerability in many, if not most, settings. The study began with investigations in seven regional areas, and it benefits from being conducted as part of the NAWQA Program, in which consistent methods are used so that meaningful comparisons can be made. The hydrogeologic settings and regional-scale groundwater-flow models from the initial seven regional areas are documented in Chapter A of this U.S. Geological Survey Professional Paper. Also documented in Chapter A are the methods used to collect and compile the water-quality data, determine contributing areas of the public-supply wells, and characterize the oxidation-reduction (redox) conditions in each setting. A data dictionary for the database that was designed to enable joint storage and access to water-quality data and groundwater-flow model particle-tracking output is included as Appendix 1 of Chapter A. This chapter, Chapter B, documents modifications to the study methods and presents descriptions of two regional areas that were added to the TANC study in 2004.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Sandra M. Eberts. 2011. Hydrogeologic settings and groundwater-flow simulations for regional investigations of the transport of anthropogenic and natural contaminants to public-supply wells—Investigations begun in 2004. https://doi.org/10.3133/pp1737b

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Resurvey of the Marble Canyon and Bridge Canyon dam sites in Grand Canyon National Park—Changes in sediment storage and evidence supporting the occurrence of bedrock incision through the mid-20th century

The Bureau of Reclamation developed an extensive plan for a network of dams, water tunnels, and hydropower plants in and around Grand Canyon, Arizona, in the 1940s through 1960s. The two largest of these planned dams were the Marble Canyon and Bridge Canyon Dams on the Colorado River. Though these dams were ultimately never built, Reclamation conducted extensive topographic, bathymetric, and subsurface exploration work at the sites proposed for these dams in the 1940s and 1950s. Resurveys of these dam sites were conducted between 1998 and 2021 to determine the changes in sediment storage at these dam sites caused by the upstream construction and operation of Glen Canyon Dam and by the recession of Lake Mead, the reservoir impounded by Hoover Dam. The resurveys of the Marble Canyon dam sites indicate that the post-1950s changes in sediment storage at these dam sites are broadly consistent with flux-based estimates of voluminous sand erosion from Marble Canyon since the 1963 closure of Glen Canyon Dam. These resurveys also suggest that the pre-dam longitudinal variation in sediment thickness over bedrock played a key role in determining the locations of the sand erosion induced by Glen Canyon Dam; more sand eroded from locations where more sand was present in the 1950s. The resurvey of the Bridge Canyon dam sites indicates that the Colorado River’s incision of the Lake Mead delta is regulated both by bed-sediment grain size and downstream hydraulic controls. Finally, analyses of bed-sediment thickness and sedimentological data at the dam sites, and observations of bed scour and gravel transport, suggest that sufficient bedrock was exposed to allow bedrock incision during commonly recurring pre-dam snowmelt floods that entrained small boulders into transport.

Arizona

The eruptive behavior of distributed volcanism forming low shield edifices—A case study of Sentinel-Arlington volcanic field, U.S.A.

Distributed volcanic fields are present in various tectonic settings worldwide, and their characteristics reflect differing influences from magmatic and tectonic processes. In the southwestern United States alone, there are 37 Quaternary distributed volcanic fields. After the primary period of extensional tectonics in the southern Basin and Range 15–5 million years ago, the Sentinel-Arlington volcanic field developed in southwestern Arizona between 4 and 1 million years ago. The Sentinel-Arlington volcanic field consists primarily of low relief shield volcanoes, a type of distributed volcanism with poorly understood temporal evolution. The Sentinel-Arlington volcanic field is less than 200 kilometers (km) from the Colorado Plateau, Gulf of California, and southern San Andreas Fault system. This work identifies and examines controls on the emplacement of the Sentinel-Arlington volcanic field by documenting shallow and surficial structures as well as eruption characteristics and style through time. The Sentinel-Arlington volcanic field consists of 21 volcanoes with a total of 33 vents over an area of about 770 square kilometers (km 2 ). The prominence of low relief shield volcanoes may be explained by ascent of basaltic magmas through thin Basin and Range crust, without much crustal contamination, and low viscosities common to mafic compositions. Typical eruption characteristics involve the construction of low relief shield volcanoes followed by Strombolian fissure eruptions at the summits or near-summit medial areas that produce scoria lapilli, which may weld to form agglomerate. The total lifetime erupted volume of about 4.3 cubic kilometers (km 3 ) represents an average eruptive flux of approximately 2x10 -3 km 3 per thousand years (k.y.). This erupted volume is low relative to Neogene basaltic intraplate distributed volcanic fields worldwide, which typically range from 10 -3 to 1 km 3 k.y. -1 . Sentinel-Arlington volcanic field eruptions were likely triggered by intermittent rejuvenation of transient magmatic zones that exist in thinned crust. Instantaneous flux from point sources feeding the lava flows is estimated to be on the order of 10 -1 to 10 cubic meters per second.

Arizona

Capitalization of positional (Lower/Middle/Upper) and temporal (Early/Middle/Late) adjectives in the names of formal chronostratigraphic and geochronologic units of the Phanerozoic

Many authors are understandably confused about the capitalization of the words “lower,” “middle,” “upper,” “early,” and “late.” Where these words are used simply as descriptive adjectives, they should be in lowercase; where they form the first word of a formal chronostratigraphic or geochronologic unit name, they should be in uppercase.

Professional Paper