USGS ScienceSearch

USGS · ofr95470

Numerical model analysis of the effects of ground-water withdrawals on discharge to streams and springs in small basins typical of the Puget Sound Lowland, Washington

Abstract

A numerical ground-water flow model of a hypothetical basin was constructed and used to investigate the effects of ground-water withdrawals on rates of natural discharge to streams and springs in small basins of the Puget Sound Lowland. Definitions of the topography, geology, drainage, and climate of the hypothetical basin were based on the features of typical small basins in the Puget Sound Lowland. This information was used to construct a 13-layer numerical ground-water flow model capable of simulating water levels, hydraulic gradients, and discharge to streams and springs. Three sequences of glacial drift and interglacial deposits were simulated in the model; each sequence consisted of recessional outwash, till, advance, outwash, and fine-grained interglacial sediments. Alluvial sediments of the major stream valleys and undifferentiated glacial and interglacial deposits were also included in the model. The model was calibrated by comparing simulated hydrologic conditions with expected conditions and making adjustments to values of hydraulic characteristics as needed. The model was calibrated to predevelop- ment conditions (those prior to pumping), and then used to simulate the effects of pumping on natural discharge to streams and springs. Seven series of simulations were made to investigate the effects of (1) distance from the well to a stream, (2) the presence of confining layers, (3) pumping rate, (4) depth of the pumped aquifer, (5) distance from the well to a bluff, (6) well density, and (7) recharge rate. The discharge of wells pumping from unconfined outwash aquifers on the drift plains is derived almost entirely from capture of natural discharge to nearby stream reaches. Increasing the lateral distance between the well and stream caused more of the well discharge to be captured from other streams on the drift plain. Pumping from aquifers separated from the stream by one or more confining layers caused a reduction in the effects of pumping on discharge to nearby streams that was offset by an increase in the effects on discharge to more distant streams and springs. The percentage of well discharge captured from springs on the bluff was sensitive to the distance of wells from the bluff. Simulations also showed that increased well density caused greater water-level decline locally, but, at equilibrium, did not affect the extent of the area affected by reduction of natural discharge to streams and springs. Finally, decreased recharge in areas where development had created impervious surfaces had a direct effect on the natural discharge rates to streams and springs. Increased recharge, however, increased natural discharge and offset the effects of well withdrawals. Further analysis of the time-dependent effects of with- drawals would provide additional insights, but would require the development of a transient version of the model.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

D. S. Morgan, J. L. Jones. 1996. Numerical model analysis of the effects of ground-water withdrawals on discharge to streams and springs in small basins typical of the Puget Sound Lowland, Washington. https://doi.org/10.3133/ofr95470

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Estimating aftershock risk for entry into earthquake-damaged buildings

We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).

Open-File Report

End-user needs for remote sensing wetlands of the Prairie Pothole Region of North America

The Prairie Pothole Region (PPR) of North America comprises globally important grassland and wetland ecosystems critical for numerous populations of migratory birds. Due to the importance of this region for migratory birds, and particularly waterfowl, and the threats of habitat loss due to intensifying agriculture, there is a mature and diverse system of conservation organizations, agencies, and partnerships that spends hundreds of millions of dollars annually on habitat conservation to support migratory bird populations. Remote sensing can be a powerful tool for observing and evaluating global change at large scales as well as expanding inferences from field studies to the broader landscape with statistical models. However, development and utilization of these tools has lagged behind their demand for several reasons, including concerns over spatial and temporal resolution and accuracy of products; perception of a misalignment with decision-maker needs; technological barriers such as skill sets of conservation professionals, computing resources, data access, and usability. In this report, we summarize the needs of conservation professionals and scientists who use or want to use remote sensing data products to inform science about wetland change and conservation of wetlands in the PPR. We assembled this information through several methods leading up to, during, and following a January 2026 PPR Wetland Remote Sensing Workshop. The workshop included United States and Canadian scientists, conservation professionals, and policy experts. Our goal was to bring together end-users and remote sensing product developers jointly to explore reducing the lag between product development and utilization of products to inform science and conservation. Specifically, we aimed to identify gaps in wetland remote sensing that limit effective monitoring, management, and conservation in the PPR, and to develop a framework that outlines pathways to address these gaps by fostering collaboration, improving communication networks, encouraging discussion, and building on existing and ongoing efforts. This report summarizes our participants’ descriptions of end-user needs and the outcomes of the workshop.

Prairie Pothole region

Bathymetric survey and storage capacity of Upper Lake Mary near Flagstaff, Arizona in 2024

The U.S. Geological Survey (USGS), in cooperation with the city of Flagstaff, collected bathymetric, light detection and ranging (lidar), and land-survey data of Upper Lake Mary in Arizona during the months of April and October 2024. The city of Flagstaff uses a combination of groundwater from well fields throughout the Flagstaff area and surface water, mainly from Upper Lake Mary, for its potable water supply. The purpose of the survey is to update previous surveys using new technology and compare the results to previous surveys to determine if there was a decrease in storage capacity that could affect the city’s water supply. The lakebed was mapped in April 2024 using a vessel equipped with a multibeam echosounder (MBES) and mobile lidar scanner with positioning captured using a real-time kinematic global navigation satellite system (RTK GNSS) base and receivers. In October 2024, areas of the reservoir that were too shallow for the boat and shoreline that were not captured by the vessel-based lidar were surveyed on foot using hand-held RTK GNSS receivers. At full pool (spillway elevation of 6,831.82 feet above NAVD 88 [2,082.34 meters (m)], Upper Lake Mary has a storage capacity of 16,449.80 acre-feet (20,290,611.73 cubic meters) and a surface area of 953.57 acres (3,860,926.075 square meters). The reservoir is 5.7 miles (9.7 kilometers) long and varies in width from 326 feet (99.36 m) near the central, narrow portion of the reservoir to 2,613 feet (796.44 m) in the upper portion. Comparisons between this survey and the previous two surveys from the 1950s and 2006 indicate no apparent decrease in reservoir area or storage capacity. Results of the 2024 survey indicate that Upper Lake Mary’s storage capacity increased by 0.9 percent from the 2006 survey and a 1.6 percent increase in surface area from the 2006 survey.

Arizona