Reconnaissance geochemical survey of the Farah Garan-Kutam mineral belt, Kingdom of Saudi Arabia

R.M. Samater; P.R. Johnson; A. A. Bookstrom

doi:10.3133/ofr9139

Home/Archive/USGS

USGS · ofr9139

Reconnaissance geochemical survey of the Farah Garan-Kutam mineral belt, Kingdom of Saudi Arabia

R.M. Samater·P.R. Johnson·A. A. Bookstrom

View original source ↗Read source document ↗Export metadata ↓

Abstract

Wadi-sediment samples were collected from 450 sites in a 580-km 2 area (sample density 1.5 per km 2 ) as part of an exploration program designed to assess the mineral potential of the Farah Garan - Kutam mineral belt and to evaluate mineralization at the Farah Garan ancient working (DGMR Project 3.03.10). Demagnetized panned-concentrate and sieved minus-80-mesh fractions were prepared from each bulk sample of approximately 5 kg. The fractions were analyzed for silver, arsenic, copper, lead, and zinc by atomic-absorption methods and for gold by an atomic-absorption graphite-furnace method. The analytical results for the panned-concentrate samples delineate 21 anomalies, and the results for the minus-80-mesh samples delineate 24. Of the latter, 14 are coincident with panned-concentrate anomaly areas, whereas 10 are uniquely defined. The analytical results of the panned-concentrate samples uniquely define two areas. Overall, the panned-concentrate samples yielded threshold values higher than the threshold values for the minus-80-mesh samples (for gold, 10 times higher), and delineate anomalous areas larger than those for the minus-80-mesh samples. This observation is consistent with the results of similar surveys elsewhere in the Arabian Shield, which indicate that panned-concentrate samples more effectively outline geochemical anomalies than sieved fine-grained samples. In the present survey, geochemical anomalies locate all the sites of mineralization known from previous work. The survey is therefore technically a success. However, a large number of these anomalies probably result from contamination of the wadi systems by metal dispersed from ancient mine workings, and this particular survey, overall, may be of limited value as a guide to the discovery of hitherto unknown mineralization. Nevertheless, the survey outlines two areas that may mark extensions to known mineralization, and a number of other areas in which no mineralization is known. Based on a consideration of the character of the bedrock geology, the value of each reported analytical result in relation to the respective element thresholds, and the number of anomalous samples that cluster in any given area, four areas are recommended for high-priority follow-up sampling.

Explore related subjects

Open-File Report Report

Source-reported bounding extent: 17.5° to 18° latitude; 43.5° to 44° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

R.M. Samater, P.R. Johnson, A. A. Bookstrom. 1991. Reconnaissance geochemical survey of the Farah Garan-Kutam mineral belt, Kingdom of Saudi Arabia. https://doi.org/10.3133/ofr9139

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Open-File Report↗

USGS2026

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

USGS2026

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗