USGS Science⌕ Search

USGS · ofr83779

Stratigraphy, structure, and palinspastic synthesis of the western Brooks Range, northwestern Alaska

Abstract

This report is an effort to describe and decipher the mid-Paleozoic to Lower Cretaceous stratigraphy and the orogenic evolution of the western Brooks Range. The western Brooks Range primarily is composed of stacks of complexly deformed thrust sheets that contain mostly coeval sequences of rocks with slightly different lithologic facies. In order to simplify the thrust-faulted stratigraphy and palinspastic restoration, the rocks are grouped into eight principal structural levels. The lowest structural level is believed to be autochthonous or parautochthonous and above that, each succeeding level is designated allochthon one through seven. Allochthon seven is composed of the remnants of an extensive ophiolite sheet. Allochthon six is composed of pillow basalt with subordinate intermediate volcanic rocks, chert, and Devonian limestone. It is not certain whether this allochthon was formed in a continental or oceanic setting. Allochthons five through one consist of distinctive and coeval sequences of Devonian to Lower Cretaceous sedimentary rocks that were deposited in a continental setting. The present geographic distribution of each structural level is shown on the allochthon map of the western Brooks Range. The stratigraphy of the southern part of northern Alaska has been reconstructed by systematically unstacking lower allochthons to the north of higher allochthons. The palinspastic map that results from this procedure shows that the minimum thrust displacement between allochthon seven and the autochthon is approximately 700 to 800 km. Schematic cross sections drawn across the palinspastic map show how the stratigraphy of the southern part of northern. Alaska most likely appeared prior to the orogeny. During Devonian and Mississippian time, the sedimentary sequences that are now part of allochthons one to five are inferred to have been deposited in an ensialic basin with both northern and southern margins. During Pennsylvanian time, the sequences seem to have become part of a southward-sloping continental shelf when a southern land area moved away from northern Alaska by an inferred plate tectonic process of rifting or strike-slip motion. In Early Jurassic time just prior to the Brooks Range orogeny, northern Alaska probably was an extensive continental shelf with oceanic conditions to the south and land to the north. The Brooks Range orogeny seems to have begun in the Middle Jurassic as the Arctic Alaska plate was underthrust (subducted) southward beneath oceanic crust of allochthon seven. At progressively later stages in the underthrusting process, the upper parts of the continental shelf were detached from the subthrust basement on which they were deposited, resulting in the other allochthons of the western Brooks Range. The period of major thrusting ceased by Albian time in the Early Cretaceous. During middle and Late Cretaceous time, epeirogenic uplift in the Brooks Range caused large quantities of clastic detritus to be shed into successor basins to the north and south. Broad folds and reverse faults in Upper Cretaceous sediments north of the Brooks Range provide evidence for a later period(s) of less intense deformation in northern Alaska.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Charles F. Mayfield, Irvin L. Tailleur, Inyo Ellersieck. 1983. Stratigraphy, structure, and palinspastic synthesis of the western Brooks Range, northwestern Alaska. https://doi.org/10.3133/ofr83779

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗