USGS Science⌕ Search

USGS · ofr83151

Preliminary report on geology, geochemical exploration, and biogeochemical exploration of the Red Mountain stockwork, Yellow Pine District, Valley County, Idaho

Abstract

New exploration targets for gold, molybdenum, tungsten, and tin are indicated by the systematic distribution of metals in soil and plants of the Red Mountain stockwork and its environs. The stockwork is built of countless quartz veins and veinlets, extensively argillized and containing sparsely disseminated gold, pyrite, arsenoDyrite, Dyrrhotite, fluorite, and other minerals. The stockwork developed along the outer ring-fracture zone of the Eocene Quartz Creek cauldron where subsidence strain, unrelieved by radial faulting, produced internal deformation and intense small-scale fracturing in rocks of the Idaho batholith. The stockwork, cropping out as a fault-bounded polygon 2,700 ft long and 2,000 ft wide, contains (underlies?) a large, virtually barren quartz body 1,350 ft long and 350 ft wide. Deformed, shattered granite flanks and presumably underlies the stockwork, which may plunge southward beneath inclusion-bearing granodiorite and alaskite of the Idaho batholith suite. Narrow dikes of rhyolite and latite radiate from two centers within the quartz body. Many dikes and small bosses of rhyolite and latite intrude stockwork and granite. The radial habit of some dikes and the high frequency of small intrusives concentrated within the sericite and kaolinite alteration zones suggest that a Tertiary porphyry is concealed beneath the mountain. Clay-mineral alteration zones mapped in residual soil extend far outward from the stockwork. Valleys filled with Quaternary deposits bound the stockwork-granite complex on the east, north, and west, effectively concealing elements of a crudely elliptical substructure that differs from the fault-dissected, mappable part of the complex. Metal anomalies in soil of the 3,600-ft x 8,400-ft gridded area are mostly weak and small. In contrast, metal anomalies in plants are strong, large, and consistent with the inference of a concealed elliptical substructure that may be hoodlike and may contain more than one mineralized zone. Gold in ashed sapwood of douglas-fir (Pseudotsuga menziesii) indicates a major gold anomaly, peak value 14.2 ppm Au, on inclusion-bearing granodiorite in an unprospected area south of the exposed stockwork. Locally, the gold anomaly is accompanied by a sizable tin anomaly, peak value 100 ppm Sn, in douglas-fir. Molybdenum in ashed leaves of beargrass (Xerophyllum tenax), peak value >500 ppm Mo, indicates extensive anomalies within a 2-milelong semi-elliptical belt of Mo values exceeding the 20 ppm median. Most of the belt is on valley fill, but the southern segment of it, near the major gold anomaly, is mainly on inclusion-bearing granodiorite. Here, where beargrass is sparse, the peak value of Mo in beargrass drops to 70 ppm. Where beargrass is absent, ashed leaves of sedge (Carex geyeri) have anomalous values of 100 ppm Mo. An additional target for molybdenum is indicated by molybdenite from the inaccessible Dart of the main adit. The molybdenite, seen only in dump specimens, is in weakly silicified granite that may underlie part of the stockwork. The source body of the molybdenite is blind, and no clue to it is given by samples of soil or plants. Just north of the major gold anomaly, 2 ppm values of W in beargrass coincide approximately with a tungsten anomaly in soil (peak value 22 ppm W) in an area of float containing disseminated scheelite in weakly silicified inclusion-bearing granodiorite. Other areas of 2 ppm W values in beargrass are nearly coextensive with the Moin-beargrass anomalies on Quaternary deposits of Quartz Creek valley. Some of the target areas for gold, molybdenum, tungsten, and tin have not been circumscribed by our sampling.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

B. F. Leonard, James A. Erdman. 1983. Preliminary report on geology, geochemical exploration, and biogeochemical exploration of the Red Mountain stockwork, Yellow Pine District, Valley County, Idaho. https://doi.org/10.3133/ofr83151

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗

Special Contributing Area Loading Program user’s manual

Information on the Special Contributing Area Loading Program execution and functions are presented in this user’s manual. An appendix presents a potential improvement for the user to consider. The hydrologic routing simulation method to model flow through multiple reservoirs, or sewer system components, is described. The use of Special Contributing Areas is described to run a successful simulation, which includes user input of hydrologic time series of flow components and the necessary formats. Upon completion of a successful Special Contributing Area Loading Program simulation, the program outputs hydrologic time series and a descriptive text file containing the model results for each defined sub-unit, or Special Contributing Area. The output time series contain flows through, and overflows from, the three reservoirs in the series, and the text file contains input and output path locations.

Open-File Report↗

Estimating aftershock risk for entry into earthquake-damaged buildings

We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).

Open-File Report↗