USGS Science⌕ Search

USGS · ofr78685

Mid- and North Atlantic multichannel seismic reflection profiles, 7, 8 A, B, and C, 12 E, F, G, H, I, and J, and 13 A, B, C, D, E, F, G, and H

Abstract

Available are four multichannel profiles collected by Digicon Geophysical Corporation in 1975 using a 48-channel streamer (3600 m long), and a 27.9 cubic liter airgun array. They were processed in Denver on the Phoenix "I" by William C. Petterson. The processing includes demultiplexing and resampling, geometry and common-depth-point, definition, velocity analysis noise muting, band-pass filtering, time-variant filtering, time-variant deconvolution, and automatic gain control (AGC) sealing, prior to the final profile playout. The release includes pares of or all of four lines off the eastern United States (see map) over the Georges Bank basin and the Long Island platform and upper continental rise. These profiles were collected as a part of a regional arid over the offshore Atlantic sedimentary basins as a part of a continuing program to assess the resource potential using non-proprietary data. Lines 7 and 8 are cross-shelf profiles (280 ken and 400 km long respectively) taken across Georges Basin George Bank, the continental slope and rise east of Massachusetts. A five kilometer gap exists in line 8C near the outer edge of the shelf because the high concentration of lobster pots there prevented a continous traverse through the area. Line 12 (shotpoint 5988 - 14380, parts E, F, G, H, I and J) is along-the-shelf profile, and stretches from the vicinity of Husdon Channel (mid-shelf east of New Jersey) to Browns Bank, 100 km southeast of Nova Scotia, terminating in the vicinity of the Shell Mohawk (B-93) hole. Line 13 (shotpoint 83-11295, 1120 km) traverse the upper Continental rise between Cape Hatteras and Georges Bank. These profiles including velocity scans and shot point maps, may be viewed at U. S. Geological Survey Office, Bldg. B, Quissett Campus, Woods Hole, MA., and U. S. Geological Survey Office, Bldg. 25 at the Denver Federal Center. Copies of maps, scans and profiles can be purchased from the National Geophysical Solar-Terrestrial Data center, Environmental Data Service - NOAA, Code D 621, Boulder, Co. 80303.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Members of the Engineering Geology and Ground Water Branches, U.S. Geological Survey. 1979. Mid- and North Atlantic multichannel seismic reflection profiles, 7, 8 A, B, and C, 12 E, F, G, H, I, and J, and 13 A, B, C, D, E, F, G, and H. https://doi.org/10.3133/ofr78685

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗