USGS Science⌕ Search

USGS · ofr556

Subsurface exploration for stripping coal on Lower Deep Creek, Homer district, Kenai coal field, Alaska

Abstract

The area described in this report is on the west side of the Kenai Peninsula in south-central Alaska, near the mouth of Deep Creek, a stream of moderate size that enters Cook Inlet about 2 miles south of the village of Ninilchik (pl. 1). It is 37 miles by highway north of Homer and 51 miles south of Kenai, the two principal towns of the region (fig. 1). The localities studied are in sections 2, 3, 10, and 11, T. 2 S., R. 14 W. (Seward meridian), south and west of Deep Creek within 2 miles of its mouth, and were easily reached by cutting about a mile of tractor trail from a dirt road connecting with the Sterling Highway (pl. 1). This area was chosen for detailed study because geologic mapping had indicated the presence of at least one coal bed of minable thickness and quality that appeared to be favorably situated for strip mining and was reasonably accessible to the highway. This report presents the results of drilling and trenching with a bulldozer and power-auger unit in areas along Deep Creek that had been mapped by Cobb (1952) and briefly examined by Barnes in 1953. The reader is referred to Cobb's report for a general description of the geology and coal resources of the Homer district, of which this area is a part. These earlier investigations showed that the coal-bearing Kenai formation, of Tertiary age, is generally covered by Quaternary glacial and stream deposits, except in steep bluffs and parts of the creek bed, so that subsurface data were needed to supplement the surface data in evaluating the coal reserves. The field work for this report was done in the period August 130, 1954, by the writers, assisted by A. E. Burford and W. S. Hopkins, geologists, and J. W. Dawson, operator-mechanic. It involved the use of a small crawler tractor, equipped with a 4-1/2 inch power auger for boring through the overburden to test concealed coal beds, and with a bulldozer for building access roads and opening cuts and trenches to permit direct observation and measurement of the coal at favorable localities. A more detailed description of the equipment and its use is given elsewhere (Barnes and Sokol, 1955). Work was done at two localities on Deep Creek, about 1 mile and 1-1/2 miles, respectively, above the highway bridge. These areas were mapped topographically and tied in with the land net by plane-table surveys.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 59.07103503863479° to 61.048112723016544° latitude; -152.37471621907764° to -148.25252151472097° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Farrell F. Barnes, Daniel Sokol. 1955. Subsurface exploration for stripping coal on Lower Deep Creek, Homer district, Kenai coal field, Alaska. https://doi.org/10.3133/ofr556

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗