USGS Science⌕ Search

USGS · ofr20201003

Predicting barrier island habitats and oyster and seagrass habitat suitability for various restoration measures and future conditions for Dauphin Island, Alabama

Abstract

Barrier islands, such as Dauphin Island, Alabama, provide numerous invaluable ecosystem services including storm damage reduction and erosion control to the mainland, habitat for fish and wildlife, carbon sequestration in marshes, water catchment and purification, recreation, and tourism. These islands are dynamic environments that are gradually shaped by currents, waves, and tides under quiescent conditions yet can evolve in the time scale of hours to days during hurricanes and other extreme storms. The ecosystems associated with these islands also face numerous other hazards, including accelerated sea-level rise, oil spills, and anthropogenic stressors. Hurricane Katrina in 2005 and the Deepwater Horizon oil spill in 2010 are two major events that have affected habitats and natural resources on Dauphin Island, Ala. The latter event prompted a cooperative effort between the U.S. Geological Survey and the U.S. Army Corps of Engineers to investigate viable, sustainable restoration measures that reduce degradation and enhance the natural resources of Dauphin Island, Ala. In collaboration with the State of Alabama and the National Fish and Wildlife Foundation, the overarching goal of the Alabama Barrier Island Restoration Feasibility Assessment project was to document baseline conditions and forecast potential conditions under varying sea-level change and storm scenarios for a no-action alternative along with a variety of restoration measures including beach and dune restoration, marsh and back-barrier restoration, and placement of sand in the littoral zone. The modeling component of this project used decadal hydrodynamic geomorphic, water quality, and habitat modeling to better understand how the various restoration measures may influence the habitat composition, sustainability, and resiliency of Dauphin Island under potential future conditions, benchmarked against the no-action case. The report covers the habitat modeling efforts associated with the Alabama Barrier Island Restoration Feasibility Assessment project. For various potential future island configurations for Dauphin Island, we predicted coverage of habitat types (for example, beach, dune, intertidal marsh, and woody vegetation) using a spatially explicit habitat model based on landscape-position information (for example, elevation and distance from shore) extracted from the hydrodynamic geomorphic outputs. Similarly, we forecasted habitat suitability for oysters and seagrass using habitat suitability index models. Another component of the Alabama Barrier Island Restoration Feasibility Assessment project, presented separately, integrates these habitat model results into a structured decision-making framework that accounts for competing objectives. Collectively, this information provides insights to natural resource managers and planners on how a restoration measure may maintain or impede natural coastal processes and provide information critical for making future-focused decisions regarding barrier island restoration.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 30.166500980766052° to 30.311245603935003° latitude; -88.341064453125° to -88.0389404296875° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

2020-03-09. Predicting barrier island habitats and oyster and seagrass habitat suitability for various restoration measures and future conditions for Dauphin Island, Alabama. https://doi.org/10.3133/ofr20201003

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗