Implementation of MOVE.1, censored MOVE.1, and piecewise MOVE.1 low-flow regressions with applications at partial-record streamgaging stations in New Jersey

Susan J. Colarullo; Samantha L. Sullivan; Amy R. McHugh

doi:10.3133/ofr20181089

Home/Archive/USGS

USGS · ofr20181089

Implementation of MOVE.1, censored MOVE.1, and piecewise MOVE.1 low-flow regressions with applications at partial-record streamgaging stations in New Jersey

Susan J. Colarullo·Samantha L. Sullivan·Amy R. McHugh

View original source ↗Read source document ↗Export metadata ↓

Abstract

The U.S. Geological Survey (USGS) uses Maintenance of Variance Extension Type 1 (MOVE.1) regression to transfer streamflows measured at long-term continuous-record streamgaging stations to partial-record (PR) streamgaging stations where intermittent base-flow measurements are available. MOVE.1 regression is used widely throughout the hydrologic community to extend historic low flows and low-flow statistics at continuous-record streamgaging stations to streamgaging stations that have access to only a partial record of low flows. The method correlates base-flow measurements at PR streamgaging stations with daily mean streamflows measured at index stations that exhibit similar streamflow characteristics. Following changes in the computing platform for storing, processing, retrieving, and publishing National Water Information System (NWIS) hydrologic data, legacy Statistical Analysis System (SAS) code developed by the USGS to implement the MOVE.1 regression was no longer suitable for reading and processing NWIS streamflow data. To migrate the MOVE.1 program so that it could continue to read streamflow data using the new hydrologic data platform, the SAS code was re-written in R, an open source programming language and software environment for statistical computing and graphics supported by the R Foundation for Statistical Computing. The work described in this report was performed in a study conducted by USGS in cooperation with the New Jersey Department of Environmental Protection. During migration from SAS to R, graphical and tabular output generated by the R script was compared to output produced by the legacy SAS code to ensure that equations used to perform the MOVE.1 regression remained the same. An option to perform censored MOVE.1 regression was added to extend the MOVE.1 methodology to cases where one or more measured continuous-record or PR streamgaging station flows are zero valued. In addition to permitting censored regression, the new R script includes an option to perform piecewise MOVE.1 regression when the relation between PR station and index station low flows varies significantly across the range of index station streamflows. Together with traditional MOVE.1 regression, censored, and piecewise MOVE.1 regression methods implemented by the R script offer less biased estimates than ordinary least squares regression for the annual 7-day 10-year and other low-flow statistics at PR stations for a range of base-flow conditions. The R script is used to implement the MOVE.1 regression methods across a variety of computing platforms.

Explore related subjects

Open-File Report Report

Source-reported bounding extent: 38.928519° to 41.357423° latitude; -75.559614° to -73.893979° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Susan J. Colarullo, Samantha L. Sullivan, Amy R. McHugh. 2018-08-20. Implementation of MOVE.1, censored MOVE.1, and piecewise MOVE.1 low-flow regressions with applications at partial-record streamgaging stations in New Jersey. https://doi.org/10.3133/ofr20181089

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Open-File Report↗

USGS2026

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

USGS2026

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗