USGS ScienceSearch

USGS · ofr20151208

Characterization of water-quality and bed-sediment conditions in Currituck Sound, North Carolina, prior to the Mid-Currituck Bridge construction, 2011–15

Abstract

The North Carolina Turnpike Authority, a division of the North Carolina Department of Transportation, is planning to make transportation improvements in the Currituck Sound area by constructing a two-lane bridge from U.S. Highway 158 just south of Coinjock, North Carolina, to State Highway 12 on the Outer Banks just south of Corolla, North Carolina. The results of the Final Environmental Impact Study associated with the bridge and existing roadway improvements indicated potential water-quality and habitat impacts to Currituck Sound related to stormwater runoff, altered light levels, introduction of piles as hard substrate, and localized turbidity and siltation during construction. The primary objective of this initial study phase was to establish baseline water-quality conditions and bed-sediment chemistry of Currituck Sound in the vicinity of the planned alignment of the Mid-Currituck Bridge. These data will be used to evaluate the impacts associated with the bridge construction and bridge deck stormwater runoff. Between 2011 and 2015, discrete water-quality samples were collected monthly and after selected storm events from five locations in Currituck Sound. The sampling locations were distributed along the proposed alignment of the Mid-Currituck Bridge. Water samples were analyzed for physical parameters and water-quality constituents associated with bridge deck stormwater runoff and important in identifying impaired waters designated as “SC” (saltwater-aquatic life propagation/ protection and secondary recreation) under North Carolina’s water-quality classifications. Bed-sediment chemistry was also measured three times during the study at the five sampling locations. Continuous water-level and wind speed and direction data in Currituck Sound were also collected by the U.S. Geological Survey during the study period. For the water samples, measured concentrations were greater than water-quality thresholds on 52 occasions. In addition, there were 190 occurrences of censored results having a reporting level higher than specific thresholds. All 52 occurrences of concentrations greater than water-quality thresholds were confined to seven different physical properties or constituents, namely pH (25), turbidity (8), total recoverable chromium (6), total recoverable copper (6), dissolved copper (3), total recoverable mercury (2), and total recoverable nickel (2). Concentrations of 17 other constituents were never measured to be greater than their established water-quality thresholds during the study. The focus of the water-quality characterization was on concentrations of constituents identified as parameters of concern in a 2011 collaborative U.S. Geological Survey/North Carolina Department of Transportation study that characterized bridge deck stormwater runoff across North Carolina. The occurrence and distribution of parameters of concern identified in the 2011 study, including pH, nutrients, total recoverable and dissolved metals, and polycyclic aromatic hydrocarbons, and some additional pertinent physical properties (dissolved oxygen, specific conductance, and turbidity), were analyzed in water and bed-sediment samples. Statistical differences were identified between monthly and storm samples for the following physical properties and constituents: pH, dissolved oxygen, specific conductance, turbidity, Escherichia coli bacteria, total recoverable aluminum, and total recoverable iron. Seasonality was observed in pH, specific conductance, dissolved oxygen, turbidity, total phosphorus, and total nitrogen, and total recoverable aluminum, arsenic, iron, lead, and manganese during the study period. The volume and residence time of the water in Currituck Sound are such that the water chemistry is relatively uniform spatially, but variable temporally. One of the most variable constituents in bed sediments was the fraction of fines, those sediments less than 63 micrometers in diameter. Because most, if not all, of the measured constituents were presumably associated with this fraction, bulk-sediment concentrations are determined largely by the amount of fines present. Only four constituents were greater than bed-sediment thresholds: tin (5 samples), barium (4 samples), aluminum (2 samples), and diethyl phthalate (1 sample). The occurrences of concentrations being greater than referenced thresholds could be underestimated for diethyl phthalate, because the reporting level exceeded the threshold in nine samples. Thirty-five constituents had sampled concentrations that were never greater than quality thresholds, although 21 of these constituents (154 instances) had at least one sample with a reporting level that was greater than the corresponding threshold. Finally, 33 constituents had no quality thresholds. This study and previous studies of bed-sediment quality in Currituck Sound, although few, indicate that sedimentation in Currituck Sound near the proposed alignment of the MidCurrituck Bridge is characterized overall by low and transient input, frequent wind-driven resuspension, and little long-term deposition of fines. To the extent that it might alter water depths along the alignment, bridge construction might also alter the deposition and resuspension rates of fine sediments in Currituck Sound in the vicinity of the bridge. The characterization of water-quality and bed-sediment chemistry in Currituck Sound along the proposed alignment of the Mid-Currituck Bridge summarized herein provides a baseline for determining the effect of bridge construction and bridge deck runoff on environmental conditions in Currituck Sound.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 35.7° to 36.75° latitude; -76.4° to -75.4° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Chad R. Wagner, Sharon Fitzgerald, Dominick J. Antolino. 2015-12-24. Characterization of water-quality and bed-sediment conditions in Currituck Sound, North Carolina, prior to the Mid-Currituck Bridge construction, 2011–15. https://doi.org/10.3133/ofr20151208

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Estimating aftershock risk for entry into earthquake-damaged buildings

We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).

Open-File Report

End-user needs for remote sensing wetlands of the Prairie Pothole Region of North America

The Prairie Pothole Region (PPR) of North America comprises globally important grassland and wetland ecosystems critical for numerous populations of migratory birds. Due to the importance of this region for migratory birds, and particularly waterfowl, and the threats of habitat loss due to intensifying agriculture, there is a mature and diverse system of conservation organizations, agencies, and partnerships that spends hundreds of millions of dollars annually on habitat conservation to support migratory bird populations. Remote sensing can be a powerful tool for observing and evaluating global change at large scales as well as expanding inferences from field studies to the broader landscape with statistical models. However, development and utilization of these tools has lagged behind their demand for several reasons, including concerns over spatial and temporal resolution and accuracy of products; perception of a misalignment with decision-maker needs; technological barriers such as skill sets of conservation professionals, computing resources, data access, and usability. In this report, we summarize the needs of conservation professionals and scientists who use or want to use remote sensing data products to inform science about wetland change and conservation of wetlands in the PPR. We assembled this information through several methods leading up to, during, and following a January 2026 PPR Wetland Remote Sensing Workshop. The workshop included United States and Canadian scientists, conservation professionals, and policy experts. Our goal was to bring together end-users and remote sensing product developers jointly to explore reducing the lag between product development and utilization of products to inform science and conservation. Specifically, we aimed to identify gaps in wetland remote sensing that limit effective monitoring, management, and conservation in the PPR, and to develop a framework that outlines pathways to address these gaps by fostering collaboration, improving communication networks, encouraging discussion, and building on existing and ongoing efforts. This report summarizes our participants’ descriptions of end-user needs and the outcomes of the workshop.

Prairie Pothole region

Bathymetric survey and storage capacity of Upper Lake Mary near Flagstaff, Arizona in 2024

The U.S. Geological Survey (USGS), in cooperation with the city of Flagstaff, collected bathymetric, light detection and ranging (lidar), and land-survey data of Upper Lake Mary in Arizona during the months of April and October 2024. The city of Flagstaff uses a combination of groundwater from well fields throughout the Flagstaff area and surface water, mainly from Upper Lake Mary, for its potable water supply. The purpose of the survey is to update previous surveys using new technology and compare the results to previous surveys to determine if there was a decrease in storage capacity that could affect the city’s water supply. The lakebed was mapped in April 2024 using a vessel equipped with a multibeam echosounder (MBES) and mobile lidar scanner with positioning captured using a real-time kinematic global navigation satellite system (RTK GNSS) base and receivers. In October 2024, areas of the reservoir that were too shallow for the boat and shoreline that were not captured by the vessel-based lidar were surveyed on foot using hand-held RTK GNSS receivers. At full pool (spillway elevation of 6,831.82 feet above NAVD 88 [2,082.34 meters (m)], Upper Lake Mary has a storage capacity of 16,449.80 acre-feet (20,290,611.73 cubic meters) and a surface area of 953.57 acres (3,860,926.075 square meters). The reservoir is 5.7 miles (9.7 kilometers) long and varies in width from 326 feet (99.36 m) near the central, narrow portion of the reservoir to 2,613 feet (796.44 m) in the upper portion. Comparisons between this survey and the previous two surveys from the 1950s and 2006 indicate no apparent decrease in reservoir area or storage capacity. Results of the 2024 survey indicate that Upper Lake Mary’s storage capacity increased by 0.9 percent from the 2006 survey and a 1.6 percent increase in surface area from the 2006 survey.

Arizona