USGS Science⌕ Search

USGS · ofr20111123

Estimation of bed-material transport in the lower Chetco River, Oregon, water years 2009-2010

Abstract

This assessment of bed-material transport uses methods developed in a previous study (Wallick and others, 2010) to estimate bed-material flux at the USGS Chetco River streamflow gaging station located at flood-plain kilometer 15 (14400000). On the basis of regressions between daily mean flow and transport capacity, daily bed-material flux was calculated for the period October 1, 2008 to March 30, 2011. The daily flux estimates were then aggregated by water year (WY) for WY 2009 and WY 2010 and the period April 1-March 31 during 2008-09, 2009-10 and 2010-11. The main findings were: *Estimated bed-material flux for WY 2009 (October 1, 2008 to September 30, 2009) was 87,300 metric tons as calculated by the Parker (1990a, b) equation (hereinafter \'the Parker equation\') and 116,900 metric tons as calculated by the Wilcock and Crowe (2003) equation (hereinafter \'the Wilcock-Crowe equation\'). *Estimated bed-material flux for water year 2010 (October 1, 2008 to September 30, 2009) was 56,800 metric tons as calculated by the Parker equation and 96,700 metric tons as calculated by the Wilcock-Crowe equation. *Estimated bed-material flux for April 1, 2008, to March 31, 2009, was 84,700 metric tons as calculated by the Parker equation and 111,700 metric tons as calculated by the Wilcock-Crowe equation. Flux values from April 1 to September 30, 2008, are from Wallick and others (2010). *Estimated bed-material flux for April 1, 2009, to March 31, 2010, was 45,500 metric tons as calculated by the Parker equation and 79,100 metric tons as calculated by the Wilcock-Crowe equation. *Estimated bed-material flux for April 1, 2010, to March 31, 2011, was 67,100 metric tons as calculated by the Parker equation and 134,300 metric tons as calculated by the Wilcock-Crowe equation. These calculations used provisional flow data for December 29, 2010, to March 31, 2011, and may be subject to revision. *Water years 2009 and 2010 both had less bed-material transport than the average annual transport values of 105,300 and 152,300 metric tons for the period 1970-2010 as calculated by the Parker and Wilcock-Crowe equations, respectively.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 42.03679931146698° to 42.14125958838083° latitude; -124.30240631103514° to -124.1513442993164° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J. Rose Wallick, Jim E. O'Connor. 2011. Estimation of bed-material transport in the lower Chetco River, Oregon, water years 2009-2010. https://doi.org/10.3133/ofr20111123

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗