USGS ScienceSearch

USGS · ofr20101190

Floods of May 30 to June 15, 2008, in the Iowa River and Cedar River Basins, eastern Iowa

Abstract

As a result of prolonged and intense periods of rainfall in late May and early June, 2008, along with heavier than normal snowpack the previous winter, record flooding occurred in Iowa in the Iowa River and Cedar River Basins. The storms were part of an exceptionally wet period from May 29 through June 12, when an Iowa statewide average of 9.03 inches of rain fell; the normal statewide average for the same period is 2.45 inches. From May 29 to June 13, the 16-day rainfall totals recorded at rain gages in Iowa Falls and Clutier were 14.00 and 13.83 inches, respectively. Within the Iowa River Basin, peak discharges of 51,000 cubic feet per second (flood-probability estimate of 0.2 to 1 percent) at the 05453100 Iowa River at Marengo, Iowa streamflow-gaging station (streamgage) on June 12, and of 39,900 cubic feet per second (flood-probability estimate of 0.2 to 1 percent) at the 05453520 Iowa River below Coralville Dam near Coralville, Iowa streamgage on June 15 are the largest floods on record for those sites. A peak discharge of 41,100 cubic feet per second (flood-probability estimate of 0.2 to 1 percent) on June 15 at the 05454500 Iowa River at Iowa City, Iowa streamgage is the fourth highest on record, but is the largest flood since regulation by the Coralville Dam began in 1958. Within the Cedar River Basin, the May 30 to June 15, 2008, flood is the largest on record at all six streamgages in Iowa located on the mainstem of the Cedar River and at five streamgages located on the major tributaries. Flood-probability estimates for 10 of these 11 streamgages are less than 1 percent. Peak discharges of 112,000 cubic feet per second (flood-probability estimate of 0.2 to 1 percent) at the 05464000 Cedar River at Waterloo, Iowa streamgage on June 11 and of 140,000 cubic feet per second (flood-probability estimate of less than 0.2 percent) at the 05464500 Cedar River at Cedar Rapids, Iowa streamgage on June 13 are the largest floods on record for those sites. Downstream from the confluence of the Iowa and Cedar Rivers, the peak discharge of 188,000 cubic feet per second (flood-probability estimate of less than 0.2 percent) at the 05465500 Iowa River at Wapello, Iowa streamgage on June 14, 2008, is the largest flood on record in the Iowa River and Cedar River Basins since 1903. High-water marks were measured at 88 locations along the Iowa River between State Highway 99 near Oakville and U.S. Highway 69 in Belmond, a distance of 319 river miles. High-water marks were measured at 127 locations along the Cedar River between Fredonia near the mouth (confluence with the Iowa River) and Riverview Drive north of Charles City, a distance of 236 river miles. The high-water marks were used to develop flood profiles for the Iowa and Cedar River.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 41.0125° to 43.9333° latitude; -93.8167° to -91.7069° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mike S. Linhart, David A. Eash. 2010. Floods of May 30 to June 15, 2008, in the Iowa River and Cedar River Basins, eastern Iowa. https://doi.org/10.3133/ofr20101190

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Estimating aftershock risk for entry into earthquake-damaged buildings

We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).

Open-File Report

End-user needs for remote sensing wetlands of the Prairie Pothole Region of North America

The Prairie Pothole Region (PPR) of North America comprises globally important grassland and wetland ecosystems critical for numerous populations of migratory birds. Due to the importance of this region for migratory birds, and particularly waterfowl, and the threats of habitat loss due to intensifying agriculture, there is a mature and diverse system of conservation organizations, agencies, and partnerships that spends hundreds of millions of dollars annually on habitat conservation to support migratory bird populations. Remote sensing can be a powerful tool for observing and evaluating global change at large scales as well as expanding inferences from field studies to the broader landscape with statistical models. However, development and utilization of these tools has lagged behind their demand for several reasons, including concerns over spatial and temporal resolution and accuracy of products; perception of a misalignment with decision-maker needs; technological barriers such as skill sets of conservation professionals, computing resources, data access, and usability. In this report, we summarize the needs of conservation professionals and scientists who use or want to use remote sensing data products to inform science about wetland change and conservation of wetlands in the PPR. We assembled this information through several methods leading up to, during, and following a January 2026 PPR Wetland Remote Sensing Workshop. The workshop included United States and Canadian scientists, conservation professionals, and policy experts. Our goal was to bring together end-users and remote sensing product developers jointly to explore reducing the lag between product development and utilization of products to inform science and conservation. Specifically, we aimed to identify gaps in wetland remote sensing that limit effective monitoring, management, and conservation in the PPR, and to develop a framework that outlines pathways to address these gaps by fostering collaboration, improving communication networks, encouraging discussion, and building on existing and ongoing efforts. This report summarizes our participants’ descriptions of end-user needs and the outcomes of the workshop.

Prairie Pothole region

Bathymetric survey and storage capacity of Upper Lake Mary near Flagstaff, Arizona in 2024

The U.S. Geological Survey (USGS), in cooperation with the city of Flagstaff, collected bathymetric, light detection and ranging (lidar), and land-survey data of Upper Lake Mary in Arizona during the months of April and October 2024. The city of Flagstaff uses a combination of groundwater from well fields throughout the Flagstaff area and surface water, mainly from Upper Lake Mary, for its potable water supply. The purpose of the survey is to update previous surveys using new technology and compare the results to previous surveys to determine if there was a decrease in storage capacity that could affect the city’s water supply. The lakebed was mapped in April 2024 using a vessel equipped with a multibeam echosounder (MBES) and mobile lidar scanner with positioning captured using a real-time kinematic global navigation satellite system (RTK GNSS) base and receivers. In October 2024, areas of the reservoir that were too shallow for the boat and shoreline that were not captured by the vessel-based lidar were surveyed on foot using hand-held RTK GNSS receivers. At full pool (spillway elevation of 6,831.82 feet above NAVD 88 [2,082.34 meters (m)], Upper Lake Mary has a storage capacity of 16,449.80 acre-feet (20,290,611.73 cubic meters) and a surface area of 953.57 acres (3,860,926.075 square meters). The reservoir is 5.7 miles (9.7 kilometers) long and varies in width from 326 feet (99.36 m) near the central, narrow portion of the reservoir to 2,613 feet (796.44 m) in the upper portion. Comparisons between this survey and the previous two surveys from the 1950s and 2006 indicate no apparent decrease in reservoir area or storage capacity. Results of the 2024 survey indicate that Upper Lake Mary’s storage capacity increased by 0.9 percent from the 2006 survey and a 1.6 percent increase in surface area from the 2006 survey.

Arizona