USGS Science⌕ Search

USGS · ofr20051089

GIS compilation of data collected from the Pulley Ridge Deep Coral Reef region

Abstract

Pulley Ridge is a chain of drowned barrier islands that extends almost 200 km in 60-90 m water depths (Fig. 1). This drowned ridge is located on the Florida Platform in the southeastern Gulf of Mexico about 250 km west of Cape Sable, Florida (Jarrett and others, 2005). These islands formed during the early Holocene marine transgression approximately 12,000 - 14,000 years before present, and were then submerged by sea level rise and preserved near the outer edge of the Florida Platform. The southern portion of Pulley Ridge is the focus of this study. This area hosts zooxanthellate scleractinian corals, green, red and brown macro algae, and a mix of deep and typically shallow-water tropical fishes. This largely photosynthetic community is unique in that it thrives with less than 5% of the light typically associated with shallow-water reefs with similar fauna. Several factors help to account for the existence of this unique deep-water community. First, the underlying drowned barrier islands provide both elevated topography and lithified substrate for the establishment of the hardbottom community. Second, the region is commonly bathed by the Loop Current, which brings relatively clear and warm water to this area. Third, the ridge's position on the continental shelf places it within the thermocline which provides nutrients to the reef during upwelling (Halley and others, 2003). The USGS has made two proposals to resource managers for the designation of marine protected areas based on the geophysical and photographic data in this report. The proposals describe areas that may require some regulatory protection of marine life utilizing the sea floor (Fig. 1). The first proposal is that the area of greatest hermatypic coral cover (Fig. 1) is considered for future management actions and designated a Habitat Area of Particular Concern (HAPC) by the Gulf of Mexico Fishery Management Council. HAPCs are identified on the basis of habitat level considerations: The importance of the ecological function provided by the habitat. The extent to which the habitat is sensitive to human-induced environmental degradation. Whether and to what extent development activities are or will be stressing the habitat. The rarity of the habitat type. The second proposed area is for Coral Essential Fish Habitat (CEFH, Fig. 1). CEFHs are defined as "those waters and substrate necessary to corals for spawning, breeding, feeding, or growth to maturity." The following definitions are provided for clarification: waters is defined as "aquatic areas and their associated physical, chemical, and biological properties that are used by corals" substrate means "sediment, hard bottom, structures underlying the waters, and associated biological communities" necessary means "the habitat required to support a sustainable population and the managed species' contribution to a healthy ecosystem" spawning,breeding, feeding, or growth to maturity covers the full life cycle of a species. The CEFH shown in Figure 1 is the greatest coral cover in the region as determined by the bottom photo and video transects acquired during this study. This report presents the geophysical and photographic data that were collected to describe the surficial and shallow subsurface geologic framework of the area where these deep-water corals are known to occur. The data types include multibeam bathymetry, sidescan-sonar imagery, images of high-resolution seismic-reflection profiles, and bottom photographs. In addition, the tracklines for the seismic data, locations of bottom photographs and camera drifts, and tracklines along which submersible and remotely operated vehicle (ROV) observations were made are contained in the GIS files accompanying this report. Unfortunately, video footage from the camera drifts, submersible, and ROV cruises is not available on this DVD due to the quantity of data. The bottom photograph data set has been previously published (Cross and others, 2004), however it is included in this publication in an effort to integrate the varying data sets in one location. This integration is accomplished through the GIS data included on this DVD.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 24.656599398075162° to 24.997486742167503° latitude; -83.7852323565639° to -83.59728350208007° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

VeeAnn Cross, D.C. Twichell, R. B. Halley, K.T. Ciembronowicz, B. D. Jarrett, E. S. Hammar-Klose, A. C. Hine, S. D. Locker, D. F. Naar. 2005. GIS compilation of data collected from the Pulley Ridge Deep Coral Reef region. https://doi.org/10.3133/ofr20051089

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗