USGS Science⌕ Search
Home/Archive/USGS

USGS · ofr01237

Eagle Mountain Mine: Geology of the former Kaiser Steel Operation in Riverside County, California

Eric R. Force
View original source ↗Read source document ↗Export metadata ↓

Abstract

This investigation of the Eagle Mountain Mine area, though cursory, revealed new structural, alteration, and stratigraphic relations. Eagle Mountain ores were previously an important source of iron to the western U. S. Ore (where fresh) is magnetite-pyrite rock forming two stratabound horizons virtually continuous for 11 km. Gneissic basement rocks are overlain by two sedimentary units, separated by unconformities. The lower unit contains carbonate rocks and quartzite; the "vitreous quartzite" of previous workers, however, is an alteration feature rather than a stratigraphic one. The upper unit contains thick conglomerates. This layered sequence of rocks is deformed into a west-plunging anticline. Intrusion by Jurassic quartz monzonite apparently followed this deformation. Quartz monzonite forms a branching network of sills, some of which dilate the contact between the upper and lower sedimentary sequences. Intrusion resulted in extensive, mostly-anhydrous skarns, but stratabound iron ore is just as closely related to some other features: regional alteration of quartz monzonite, with iron ore adjacent to little-altered rocks along the boundary between sodic and potassic domains, the two unconformities, which apparently formed stratigraphic traps for precipitation of stratabound iron ores, a north-facing monoclinal plane between folds, which was preferentially replaced. Iron ore replaces a variety of host rocks along the two unconformities, forming massive to globular bodies, and its mineralogy correlates with deuteric alteration features, not anhydrous skarn. Its pyrite contains as much as 3% cobalt. Iron was only one of five elements that showed mobility in this region on a scale that suggests basic crustal processes. The others in probable order of flux magnitude are silica, magnesium, sodium, and potassium, to form regionally distributed “vitreous quartzite”, dolomite, and secondary feldspars, respectively.

Explore related subjects

Open-File ReportReport
90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 33.81794822741499° to 33.910314751382735° latitude; -115.55282592773438° to -115.43472290039062° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Eric R. Force. 2001. Eagle Mountain Mine: Geology of the former Kaiser Steel Operation in Riverside County, California. https://doi.org/10.3133/ofr01237

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗
USGS2026

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗
USGS2026

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗