USGS ScienceSearch

USGS · fs20093012

Assessment of in-place oil shale resources of the Green River Formation, Piceance Basin, western Colorado

Abstract

The U.S. Geological Survey (USGS) recently completed a reassessment of in-place oil shale resources, regardless of richness, in the Eocene Green River Formation in the Piceance Basin, western Colorado. A considerable amount of oil-yield data has been collected after previous in-place assessments were published, and these data were incorporated into this new assessment. About twice as many oil-yield data points were used, and several additional oil shale intervals were included that were not assessed previously for lack of data. Oil yields are measured using the Fischer assay method. The Fischer assay method is a standardized laboratory test for determining the oil yield from oil shale that has been almost universally used to determine oil yields for Green River Formation oil shales. Fischer assay does not necessarily measure the maximum amount of oil that an oil shale can produce, and there are retorting methods that yield more than the Fischer assay yield. However, the oil yields achieved by other technologies are typically reported as a percentage of the Fischer assay oil yield, and thus Fischer assay is still considered the standard by which other methods are compared.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 39° to 40.25° latitude; -109° to -107.5° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Ronald C. Johnson, Tracey J. Mercier, Michael E. Brownfield, Michael P. Pantea, Jesse G. Self. 2009. Assessment of in-place oil shale resources of the Green River Formation, Piceance Basin, western Colorado. https://doi.org/10.3133/fs20093012

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Introduction The reports and maps of our Nation’s geological surveys inform and benefit the public, private industry, government officials, and scientists. The use of clear and consistent nomenclature and classifications can improve communication of data and interpretations. Since 1899, the U.S. Geological Survey (USGS) Geologic Names Committee (GNC) has been responsible for defining standards that promote uniform geologic nomenclature and classifications among geoscientists. The GNC periodically publishes a geologic time scale, the “Divisions of Geologic Time,” that serves as the national standard for USGS publications (for example, refer to Orndorff and others, 2023). Authors may use other published geologic time scales, such as those of the Geological Society of America (GSA) or the International Commission on Stratigraphy (ICS), provided that they are clearly specified and referenced. Access to the USGS, GSA, and ICS geologic time scales is also available from the U.S. Geologic Names Lexicon (Geolex) website https://ngmdb.usgs.gov/Geolex/stratres/timescales. The geologic time scale serves a dual purpose by enabling authors to distinguish earth material units by position (chronostratigraphic) and time (geochronologic), as outlined in order of decreasing rank.

Fact Sheet