USGS ScienceSearch

USGS · fs12499

Water-Level Changes, 1980 to 1997, and Saturated Thickness, 1996-97, In the High Plains Aquifer

Abstract

The High Plains aquifer underlies one of the major agricultural regions in the world, including parts of eight States--Colorado, Kansas, Nebraska, New Mexico, Oklahoma, South Dakota, Texas, and Wyoming. In the area underlain by the High Plains aquifer (called the High Plains region in this report), the total number of acres irrigated with ground water expanded rapidly after 1940: 1949--2.1 million acres; 1959--6.1 million acres; 1969--9.0 million acres; and 1980--13.7 million acres (Gutentag and others, 1984; Thelin and Heimes, 1987). In 1990, about 95 percent of the water withdrawn from the High Plains aquifer (about 15.7 million acre-feet) was used for irrigation (Marilee Horn, U.S.Geological Survey, written commun., 1996). Water-level declines appeared in the High Plains aquifer soon after extensive ground-water irrigation development began. By 1980, water levels in the High Plains aquifer in parts of Texas, Oklahoma, and southwestern Kansas had declined more than 100 feet (Luckey and others, 1981). In response to these declines, the U.S. Geological Survey, in cooperation with numerous Federal, State, and local water resource agencies, began a ground-water monitoring program in 1988 to assess annual water-level change in the aquifer using water-level measurements from more than 7,000 wells. The purpose of this report is to present (1) water-level changes in the High Plains aquifer from 1980 to 1997 and from 1996 to 1997, (2) the precipitation pattern in the High Plains region during 1996, and (3) estimated saturated thickness of the High Plains aquifer in 1996-97. The water-level measurements used in this report were collected in winter or early spring when irrigation wells were not pumping. Map scale and density of water-level elevation data preclude showing small areas in the maps of water-level change and saturated thickness where the value may be more or less than indicated.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 31.5° to 44° latitude; -106° to -96° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Virginia L. McGuire, B.C. Fischer, C.P. Stanton. 1999. Water-Level Changes, 1980 to 1997, and Saturated Thickness, 1996-97, In the High Plains Aquifer. https://doi.org/10.3133/fs12499

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Introduction The reports and maps of our Nation’s geological surveys inform and benefit the public, private industry, government officials, and scientists. The use of clear and consistent nomenclature and classifications can improve communication of data and interpretations. Since 1899, the U.S. Geological Survey (USGS) Geologic Names Committee (GNC) has been responsible for defining standards that promote uniform geologic nomenclature and classifications among geoscientists. The GNC periodically publishes a geologic time scale, the “Divisions of Geologic Time,” that serves as the national standard for USGS publications (for example, refer to Orndorff and others, 2023). Authors may use other published geologic time scales, such as those of the Geological Society of America (GSA) or the International Commission on Stratigraphy (ICS), provided that they are clearly specified and referenced. Access to the USGS, GSA, and ICS geologic time scales is also available from the U.S. Geologic Names Lexicon (Geolex) website https://ngmdb.usgs.gov/Geolex/stratres/timescales. The geologic time scale serves a dual purpose by enabling authors to distinguish earth material units by position (chronostratigraphic) and time (geochronologic), as outlined in order of decreasing rank.

Fact Sheet