USGS ScienceSearch

USGS · fs04894

National Water-Quality Assessment Program - South-Central Texas

Abstract

In 1991, the U.S. Geological Survey (USGS), Department of the Interior, began a National Water-Quality Assessment (NAWQA) Program. The long-term goals of the NAWQA Program are to describe the status of and trends in the quality of a large, representative part of the Nation's surface- and ground-water resources and to identify the major natural and human factors that affect the quality of these resources. In addressing these goals, the program will produce a wealth of water-quality information that will be useful to policymakers and managers at national, State, and local levels. The NAWQA Program emphasis is on regional water-quality problems. The program will not diminish the need for smaller studies and monitoring presently designed and conducted by Federal, State, and local agencies to meet their individual needs. The NAWQA Program, however, will provide a large-area framework for conducting many of these activities and an understanding about national and regional water-quality conditions that cannot be acquired from individual, local programs and studies. Studies of 60 hydrologic systems that include parts of most major river basins and aquifer systems (study-unit investigations) are the building blocks of the national assessment. Areas of the 60 study units range in size from less than 1,000 to more than 60,000 square miles (mi 2 ) and represent 60 to 70 percent of the Nation's water use and population served by public water supplies. Twenty study-unit investigations were started in 1991, 20 additional started in 1994, and 20 are planned to start in 1997. Assessment activities in the South-Central Texas study area (see fig.) began in 1994.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Members of the Engineering Geology and Ground Water Branches, U.S. Geological Survey. 1994. National Water-Quality Assessment Program - South-Central Texas. https://doi.org/10.3133/fs04894

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Introduction The reports and maps of our Nation’s geological surveys inform and benefit the public, private industry, government officials, and scientists. The use of clear and consistent nomenclature and classifications can improve communication of data and interpretations. Since 1899, the U.S. Geological Survey (USGS) Geologic Names Committee (GNC) has been responsible for defining standards that promote uniform geologic nomenclature and classifications among geoscientists. The GNC periodically publishes a geologic time scale, the “Divisions of Geologic Time,” that serves as the national standard for USGS publications (for example, refer to Orndorff and others, 2023). Authors may use other published geologic time scales, such as those of the Geological Society of America (GSA) or the International Commission on Stratigraphy (ICS), provided that they are clearly specified and referenced. Access to the USGS, GSA, and ICS geologic time scales is also available from the U.S. Geologic Names Lexicon (Geolex) website https://ngmdb.usgs.gov/Geolex/stratres/timescales. The geologic time scale serves a dual purpose by enabling authors to distinguish earth material units by position (chronostratigraphic) and time (geochronologic), as outlined in order of decreasing rank.

Fact Sheet