USGS ScienceSearch

USGS · fs01094

National Water Quality Assessment Program; the Santee Basin and coastal drainage, North Carolina and South Carolina

Abstract

In 1991, the U.S. Geological Survey (USGS), U.S. Department of the Interior, began a National Water-Quality Assessment Program (NAWQA). The long-term goals of NAWQA are to describe the status of and trends in the quality of a large representative part of the Nation's surface- and ground-water resources and to identify all the major factors that affect the quality of these resources. In addressing these goals, NAWQA produces water-quality information that is useful to policymakers and managers at State, Federal, and local levels. NAWQA emphasis is on regional scale water-quality problems. The program does not diminish the need for smaller scale studies and monitoring designed and conducted by State, Federal, and local agencies. NAWQA, however, provides a large-scale framework for conducting many of these activities and an understanding about regional and national water-quality conditions that cannot be acquired from these other programs and studies. Studies of 60 hydrologic systems that include parts of most major river basins and aquifer systems are the building blocks of the national assessment. The areas of the 60 study units range in size from 1,000 to more than 60,000 square miles (mi 2 ) and represent 60 to 70 percent of the Nation's water use and population served by public water supplies. Twenty investigations were begun in 1991, 20 investigations began in 1994, and 20 are planned to begin in 1997. The assessment activities in the Santee River Basin and Coastal Drainage began in 1994.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 31.99875937194732° to 36.12900165569652° latitude; -83.37799072265624° to -79.156494140625° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

W. Brian Hughes. 1994. National Water Quality Assessment Program; the Santee Basin and coastal drainage, North Carolina and South Carolina. https://doi.org/10.3133/fs01094

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Introduction The reports and maps of our Nation’s geological surveys inform and benefit the public, private industry, government officials, and scientists. The use of clear and consistent nomenclature and classifications can improve communication of data and interpretations. Since 1899, the U.S. Geological Survey (USGS) Geologic Names Committee (GNC) has been responsible for defining standards that promote uniform geologic nomenclature and classifications among geoscientists. The GNC periodically publishes a geologic time scale, the “Divisions of Geologic Time,” that serves as the national standard for USGS publications (for example, refer to Orndorff and others, 2023). Authors may use other published geologic time scales, such as those of the Geological Society of America (GSA) or the International Commission on Stratigraphy (ICS), provided that they are clearly specified and referenced. Access to the USGS, GSA, and ICS geologic time scales is also available from the U.S. Geologic Names Lexicon (Geolex) website https://ngmdb.usgs.gov/Geolex/stratres/timescales. The geologic time scale serves a dual purpose by enabling authors to distinguish earth material units by position (chronostratigraphic) and time (geochronologic), as outlined in order of decreasing rank.

Fact Sheet