USGS Science⌕ Search
Home/Archive/USGS

USGS · 70274683

Assessing environmental drivers of denitrification in restored riverine floodplains

Danielle Winter Lay·Sara W. McMillan·Jacob D. Hosen·Sayan Dey·Gregory B. Noe
View original source ↗Export metadata ↓

Abstract

Restoration of impaired floodplains is an increasingly prevalent strategy for alleviating water quality concerns and reducing downstream flooding at watershed scales. Floodplains temporarily store water and slow flow velocity to promote sedimentation during overbank flooding and remove inorganic nitrogen from floodwater and groundwater via denitrification. Evaluating the impacts of different restoration strategies on denitrification can inform more strategic investments into floodplain modifications that improve water quality outcomes. Our research investigates how denitrification rates in floodplains respond to environmental factors that are actionable from an engineering perspective through design and water resources management. We seasonally measured soil denitrification enzyme activity and various environmental characteristics in 4 floodplains with different restoration design and management approaches at the confluence of the Wabash and Tippecanoe Rivers in Indiana, United States. Our results showed that denitrification rates in an agricultural floodplain were significantly lower than in restored floodplains with native vegetation. Certain soil conditions characteristic of floodplain wetlands were associated with higher denitrification, particularly elevated total nitrogen, moisture, silt, and organic matter contents. Vegetation species composition was correlated with denitrification rates. This link may reflect the direct effects of vegetation on soil conditions, such as supplying labile organic carbon, or indirect effects, such as vegetation acting as an indicator of hydrologic regime and land use. Denitrification seasonally varied, peaking in winter when nitrate supply from rivers draining agricultural watersheds in the region is also high. Substrate limitation of soil denitrification enzyme activity was most significant during the summer when overbank flooding, which replenishes soil nitrogen stocks, rarely occurs. Our findings indicate that denitrification capacity will likely be maximized in riverine floodplains that are restored as wetlands with diverse native vegetation and enhanced hydrologic connectivity. Such restoration activities promote higher denitrification rates via elevated moisture, fine sediment deposition, and soil organic matter.

Explore related subjects

Journal of Ecological Engineering DesignArticle

Keep this discovery

BibTeXRIS

Danielle Winter Lay, Sara W. McMillan, Jacob D. Hosen, Sayan Dey, Gregory B. Noe. 2026-03-05. Assessing environmental drivers of denitrification in restored riverine floodplains. https://doi.org/10.70793/jeed.13

Cite the original work for its findings. Save a collection to share your selection of sources.

Discover connections

Article subjectJournal of Ecological Engineering Design subjectTippecanoe River, Wabash River placeUnited STates place

Connections use source metadata and explicit phrase matches, not verified experimental comparisons.

KEEP EXPLORING

Related discoveries

USGS2026

A process-based model for forecasting wave runup along the coast of Georgia

Wave runup is an important nearshore process that impacts total water level, sediment transport, and coastal design. Current methods for forecasting wave runup implement an empirical model that considers offshore wave height, wave period, and generalized beach slope. In this study, the authors generated wave runup forecasts from offshore wave conditions and a system of polynomial equations derived from numerical simulations at three different still water datums for each beach profile. They developed a process-based methodology that incorporated site-specific cross-shore topobathy into the phase-resolving numerical model. A comparison between the system of equations, deterministic hydrodynamic simulations, and observed high-water marks was made using Hurricanes Matthew (2016) and Irma (2017) for 12 cases, and it showed that the polynomials were capable of being consistent with the results from full simulation runs, while not requiring hours of runtime when a forecast was needed—the differences between the polynomial and the observed high water marks ranged from 3 to 32 cm for the Irma hindcast and 9–70 cm for Matthew. Then, using forcings from Hurricanes Ian and Nicole (2022), the model predicted the occurrence of dune collision, overwash, and inundation for the coast of Georgia and suggested that wave runup was impacted by the still water level and local topobathy.

Georgia↗
USGS2026

Design and function of the Autonomous Benthic Imaging and Surveying System (ABISS) for remote sensing of lake and seabed environments

Lake and seabed environments are home to fisheries and other biota that are important to ecosystems and economies, yet these environments and the species that use them are difficult to accurately assess and monitor. Traditional benthic survey techniques, like bottom trawling used by the U.S. Geological Survey, are limited by substrate constraints, poor spatial resolution and precision, and operational depth limits, hindering accurate assessment of benthic species and habitats. In response to these limitations, the U.S. Geological Survey developed the Autonomous Benthic Imaging and Surveying System, a camera system integrated into underwater vehicles, to capture high-resolution images of the lakebed. The system uses color and stereo cameras to collect imagery, which can be analyzed using computational methods to detect organisms and (or) characterize habitat features, such as geologic substrate types. The system has been integrated into autonomous underwater vehicles and into an underwater housing used by self-contained underwater breathing apparatus (SCUBA) divers. Although the engineering of the system was motivated by the need for data collection in the Great Lakes, it has potential to collect high quality data in any aqueous setting with sufficient water clarity and safe operating conditions. The Autonomous Benthic Imaging and Surveying System can operate across diverse depths and light conditions to map and quantify ecological patterns that were difficult or impossible to assess using traditional methods. The Autonomous Benthic Imaging and Surveying System offers the potential for accurate and precise monitoring and assessment of native benthic biota, invasive species, and habitat, potentially providing natural resource managers with improved information to support decision making about benthic resource management.

Great Lakes↗
USGS2025

VIPER site analysis

We needed to evaluate available orbital data of NASA’s Volatiles Investigating Polar Exploration Rover (VIPER) mission area in order to derive a variety of maps to help the science team identify scientifically interesting places for the rover to visit and to provide scientific context for our mission. Some of these maps also fulfilled engineering and mission design needs to enable safe and efficient landing and roving. We incorporated data from the Lunar Reconnaissance Orbiter Camera, the Lunar Orbital Laser Altimeter, the Mini-RF instrument, the Chandrayaan-2 Orbital High Resolution Camera, the Korean Pathfinder Lunar Orbiter’s Shadowcam, the Kaguya Spectral Profiler and Multiband Imager, and the Chandrayaan-1 Moon Mineralogy Mapper. We used a variety of techniques to build these maps, including stereogrammetry, shape-from-shading, ice stability depth and surface temperature calculations, and the horizon method for solar illumination and direct-to-Earth communications maps. Altogether, these maps allowed us to survey for boulders, evaluate features in permanently shadowed regions that VIPER might explore, provide mineralogic context for what VIPER’s instruments may learn, estimate the ages and radar properties of craters in the VIPER mission area, and evaluate the potential for gravity traverses with the rover. These data and techniques provided a rich set of information from which both the VIPER science team and engineering teams were able to draw in order to plan a safe landing and to plan a VIPER surface mission that will be both scientifically valuable and robust from an operational perspective.

The Planetary Science Journal↗