USGS ScienceSearch

USGS · 70256183

Using simulated GEDI waveforms to evaluate the effects of beam sensitivity and terrain slope on GEDI L2A relative height metrics over the Brazilian Amazon Forest

Abstract

The vertical structure of forests provides important parameters for estimating aboveground biomass (AGB) and it can be measured by LiDAR sensors. The Global Ecosystem Dynamics Investigation (GEDI) full-waveform LiDAR sensor collects data systematically over the Earth’s surface from the International Space Station. Since GEDI became operational, it has collected billions of ~25 m diameter footprints. This massive dataset has been used to create higher level gridded and non-grided products. However, GEDI’s ~25 m footprints can be subject to errors associated with effects of geolocation, terrain slope, and beam sensitivity, among others, which are likely transferred to the downstream products. This study aims to (1) evaluate the effect of beam sensitivity and terrain slope on the accuracy of relative heights (RH) of GEDI product L2A version 2 through comparison with discrete-return airborne LiDAR data collected over transects in the Brazilian Amazon Forest biome, (2) assess GEDI’s geolocation uncertainty and investigate its combined effects with beam sensitivity and terrain slope, and (3) re-evaluate beam sensitivity and terrain slope effects on the GEDI L2A RHs using footprints that were geolocation-adjusted through a simple novel approach. The analysis separates GEDI footprints by acquisition time, i.e., daytime, nighttime, and combined (all-data). The discrete-return airborne LiDAR point clouds are used to derive terrain slope within the GEDI footprints, and to simulate GEDI waveforms and derive RHs comparable to the GEDI L2A product. Results indicate that terrain slope only causes significant effects on GEDI data collected during daytime because solar radiation affects waveform signal-to-noise ratio. Beam sensitivity causes significant effects on nighttime and all-data GEDI L2A RHs. If geolocation uncertainty is considered, the effects of beam sensitivity and terrain slope have just minor changes. Geolocation-adjusted data continue showing significant effects on nighttime and all-data RH differences caused by beam sensitivity but produce unbiased results. This study improves the understanding of how beam sensitivity, terrain slope and their combined effect with geolocation uncertainty may affect the GEDI L2A RH collected over the Brazilian Amazon forest during daytime and nighttime.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: -16.46821635041222° to 8.927949738632165° latitude; -76.17735455212451° to -43.65782330212468° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Pedro V. C. Oliveira, Xiaoyang Zhang, Birgit Peterson, Jean P. Ometto. 2023. Using simulated GEDI waveforms to evaluate the effects of beam sensitivity and terrain slope on GEDI L2A relative height metrics over the Brazilian Amazon Forest. https://doi.org/10.1016/j.srs.2023.100083

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Multi-temporal mapping and analyses of post-wildfire surface soil moisture modeled from Landsat Thermal-IR and Sentinel-1 SAR

Wildfires alter surface soil moisture by consuming vegetation and exposing the soil to increased solar radiation, increased precipitation throughfall, and reduced infiltration from soil hydrophobicity. This can affect the water balance within the watershed and, in turn, influence post-fire nutrient cycling and ecosystem succession. Modeling surface soil moisture over large areas using satellite remote sensing can aid monitoring of soil moisture patterns and dynamics. We trained a random forest regression model using an in situ soil moisture network and examined pre- and post-fire soil moisture dynamics for three wildfires that burned in 2016 and 2017 in coastal California, U.S.A. Model inputs included Sentinel-1A synthetic aperture radar (SAR) and Landsat thermal infrared imagery (TIR), which produced a high resolution (30 m) soil moisture map time series with 18–20 estimates across 2 years. An unbiased root mean square error of 0.065 and an r 2 of 0.624 indicates a good fit between the model and reference data. We found a significant interaction between treatment (wildfire or unburned) and period (before or after wildfire) by examining the modeled surface soil moisture in high-severity burned areas. Before-after control-impact metrics showed that modeled surface soil moisture was lower after each fire within wildfire areas compared to unburned controls, and overall changes in soil moisture were greater in the wildfire perimeters than unburned areas. These results demonstrate the potential of Sentinel-1 SAR and Landsat TIR data for the development of high-resolution soil moisture time series products to support monitoring and assessment of post-fire soil hydrologic conditions.

California

Automated generation of an urban synthetic elevation checkpoint network across the North Carolina coastline, USA

Lidar and structure from motion-derived digital elevation and surface models have widespread application. Consideration of a topographic model's vertical root mean squared error (RMSEz) and systematic directional bias is important for many of these applications, particularly landscape change detection and measurement. Due to logistic, resource, and time constraints, wide area remotely sensed topographic surveys are not always accompanied by an in situ checkpoint network for validating and characterizing survey error. Here we describe and test a method for automatically generating synthetic elevation checkpoints in bulk across hundreds of kilometers using a publicly available lidar-derived DEM time-series, road vector network, and landcover classification map. Our method produced 6000–10,000 synthetic checkpoints across the developed barrier island coastline of North Carolina. These checkpoints characterized vertical error metrics in a statistically similar way as in situ checkpoints when assessing the vertical accuracy of a contemporary lidar-derived DEM and produced RMSEz metrics an average of 0.018 m from the RMSEz of historical lidar DEMs published with tested accuracy metrics. This new method has the potential to A) lower the cost and time required to validate new remotely sensed topographic surveys by reducing or eliminating the field work associated with in situ checkpoint surveys, B) provide a means of retroactively assessing the absolute vertical accuracy and systematic bias of historical topographic datasets that were not published with tested accuracy metrics, and C) generate reference networks to assess and correct spatially variable patterns of vertical bias in topographic datasets.

North Carolina

Near real-time detection of winter cover crop termination using harmonized Landsat and Sentinel-2 (HLS) to support ecosystem assessment

Cover crops are planted to reduce soil erosion, increase soil fertility, and improve watershed management. In the Delmarva Peninsula of the eastern United States, winter cover crops are essential for reducing nutrient and sediment losses from farmland. Cost-share programs have been created to incentivize cover crops to achieve conservation objectives. This program required that cover crops be planted and terminated within a specified time window. Usually, farmers report cover crop termination dates for each enrolled field (∼28,000 per year), and conservation district staff confirm the report with field visits within two weeks of termination. This verification process is labor-intensive and time-consuming and became restricted in 2020–2021 due to the COVID-19 pandemic. This study used Harmonized Landsat and Sentinel-2 (HLS, version 2.0) time-series data and the within-season termination (WIST) algorithm to detect cover crop termination dates over Maryland and the Delmarva Peninsula. The estimated remote sensing termination dates were compared to roadside surveys and to farmer-reported termination dates from the Maryland Department of Agriculture database for the 2020–2021 cover crop season. The results show that the WIST algorithm using HLS detected 94% of terminations (statuses) for the enrolled fields (n = 28,190). Among the detected terminations, about 49%, 72%, 84%, and 90% of remote sensing detected termination dates were within one, two, three, and four weeks of agreement to farmer-reported dates, respectively. A real-time simulation showed that the termination dates could be detected one week after termination operation using routinely available HLS data, and termination dates detected after mid-May are more reliable than those from early spring when the Normalized Difference Vegetation Index (NDVI) was low. We conclude that HLS imagery and the WIST algorithm provide a fast and consistent approach for generating near-real-time cover crop termination maps over large areas, which can be used to support cost-share program verification.

Maryland